The direct_mail extension through 5.2.3 for TYPO3 allows Denial of Service via log entries.

A vulnerability in the SSH server of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition for the SSH server of an affected device. This vulnerability is due to a logic error when an SSH session is established. An attacker could exploit this vulnerability by sending crafted SSH messages to an affected device. A successful exploit could allow the attacker to exhaust available SSH resources on the affected device so that new SSH connections to the device are denied, resulting in a DoS condition. Existing SSH connections to the device would continue to function normally. The device must be rebooted manually to recover. However, user traffic would not be impacted and could be managed using a remote application such as Cisco Adaptive Security Device Manager (ASDM).

Joomla! 1.03 does not restrict the number of "Search" Mambots, which allows remote attackers to cause a denial of service (resource consumption) via a large number of Search Mambots.

OpenZeppelin Contracts is a library for secure smart contract development. The target contract of an EIP-165 `supportsInterface` query can cause unbounded gas consumption by returning a lot of data, while it is generally assumed that this operation has a bounded cost. The issue has been fixed in v4.7.2. Users are advised to upgrade. There are no known workarounds for this issue.

ImageSharp is a 2D graphics library. In versions below 2.1.11 and 3.0.0 through 3.1.10, a specially crafted GIF file containing a malformed comment extension block (with a missing block terminator) can cause the ImageSharp GIF decoder to enter an infinite loop while attempting to skip the block. This leads to a denial of service. Applications processing untrusted GIF input should upgrade to a patched version. This issue is fixed in versions 2.1.11 and 3.1.11.

In Puma before versions 3.12.2 and 4.3.1, a poorly-behaved client could use keepalive requests to monopolize Puma's reactor and create a denial of service attack. If more keepalive connections to Puma are opened than there are threads available, additional connections will wait permanently if the attacker sends requests frequently enough. This vulnerability is patched in Puma 4.3.1 and 3.12.2.

An HTTP/2 implementation flaw allows a denial-of-service (DoS) that uses malformed HTTP/2 control frames in order to break the max concurrent streams limit (HTTP/2 MadeYouReset Attack).  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

xz is a pure golang package for reading and writing xz-compressed files. Prior to version 0.5.14, it is possible to put data in front of an LZMA-encoded byte stream without detecting the situation while reading the header. This can lead to increased memory consumption because the current implementation allocates the full decoding buffer directly after reading the header. The LZMA header doesn't include a magic number or has a checksum to detect such an issue according to the specification. Note that the code recognizes the issue later while reading the stream, but at this time the memory allocation has already been done. This issue has been patched in version 0.5.14.

Starlette is a lightweight ASGI (Asynchronous Server Gateway Interface) framework/toolkit, designed for building async web services in Python. In versions 0.47.1 and below, when parsing a multi-part form with large files (greater than the default max spool size) starlette will block the main thread to roll the file over to disk. This blocks the event thread which means the application can't accept new connections. The UploadFile code has a minor bug where instead of just checking for self._in_memory, the logic should also check if the additional bytes will cause a rollover. The vulnerability is fixed in version 0.47.2.

LiteSpeed QUIC (LSQUIC) Library before 4.3.1 has an lsquic_engine_packet_in memory leak.

Mastodon is a free, open-source social network server based on ActivityPub Mastodon which facilitates LDAP configuration for authentication. In versions 3.1.5 through 4.2.24, 4.3.0 through 4.3.11 and 4.4.0 through 4.4.3, Mastodon's rate-limiting system has a critical configuration error where the email-based throttle for confirmation emails incorrectly checks the password reset path instead of the confirmation path, effectively disabling per-email limits for confirmation requests. This allows attackers to bypass rate limits by rotating IP addresses and send unlimited confirmation emails to any email address, as only a weak IP-based throttle (25 requests per 5 minutes) remains active. The vulnerability enables denial-of-service attacks that can overwhelm mail queues and facilitate user harassment through confirmation email spam. This is fixed in versions 4.2.24, 4.3.11 and 4.4.3.

Helm is a tool for managing Charts, pre-configured Kubernetes resources. Versions prior to 3.10.3 are subject to Uncontrolled Resource Consumption, resulting in Denial of Service. Input to functions in the _strvals_ package can cause a stack overflow. In Go, a stack overflow cannot be recovered from. Applications that use functions from the _strvals_ package in the Helm SDK can have a Denial of Service attack when they use this package and it panics. This issue has been patched in 3.10.3. SDK users can validate strings supplied by users won't create large arrays causing significant memory usage before passing them to the _strvals_ functions.

Impact Cloudflare quiche was discovered to be vulnerable to incorrect congestion window growth, which could cause it to send data at a rate faster than the path might actually support. An unauthenticated remote attacker can exploit the vulnerability by first completing a handshake and initiating a congestion-controlled data transfer towards itself. Then, it could manipulate the victim's congestion control state by sending ACK frames exercising an opportunistic ACK attack; see RFC 9000 Section 21.4. The victim could grow the congestion window beyond typical expectations and allow more bytes in flight than the path might really support. Patches quiche 0.24.4 is the earliest version containing the fix for this issue.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the interaction of SIP and Snort 3 for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 detection engine to restart. This vulnerability is due to a lack of error-checking when SIP bidirectional flows are being inspected by Snort 3. An attacker could exploit this vulnerability by sending a stream of crafted SIP traffic through an interface on the targeted device. A successful exploit could allow the attacker to trigger a restart of the Snort 3 process, resulting in a denial of service (DoS) condition.

A lack of appropriate timeouts in GitLab Pages included in GitLab CE/EE all versions prior to 14.7.7, 14.8 prior to 14.8.5, and 14.9 prior to 14.9.2 allows an attacker to cause unlimited resource consumption.

An attacker can cause excessive memory growth in a Go server accepting HTTP/2 requests. HTTP/2 server connections contain a cache of HTTP header keys sent by the client. While the total number of entries in this cache is capped, an attacker sending very large keys can cause the server to allocate approximately 64 MiB per open connection.

MediaWiki before 1.36.2 allows a denial of service (resource consumption because of lengthy query processing time). Visiting Special:Contributions can sometimes result in a long running SQL query because PoolCounter protection is mishandled.

A flaw was found in Rust's Ring package. A panic may be triggered when overflow checking is enabled. In the QUIC protocol, this flaw allows an attacker to induce this panic by sending a specially crafted packet. It will likely occur unintentionally in 1 out of every 2**32 packets sent or received.

An issue has been discovered in GitLab CE/EE affecting all versions from 14.1 before 18.1.5, 18.2 before 18.2.5, and 18.3 before 18.3.1 that that under certain conditions could have allowed an unauthenticated attacker to cause a denial-of-service condition affecting all users by sending specially crafted GraphQL requests.

Directus is a real-time API and App dashboard for managing SQL database content. The `@directus/storage-driver-s3` package starting in version 9.22.0 and prior to version 12.0.1, corresponding to Directus starting in version 9.22.0 and prior to 11.5.0, is vulnerable to asset unavailability after a burst of HEAD requests. Some tools use Directus to sync content and assets, and some of those tools use the HEAD method to check the existence of files. When making many HEAD requests at once, at some point, all assets are eventually served as 403. This causes denial of assets for all policies of Directus, including Admin and Public. Version 12.0.1 of the `@directus/storage-driver-s3` package, corresponding to version 11.5.0 of Directus, fixes the issue.

An issue was discovered in Django 4.2 before 4.2.21, 5.1 before 5.1.9, and 5.2 before 5.2.1. The django.utils.html.strip_tags() function is vulnerable to a potential denial-of-service (slow performance) when processing inputs containing large sequences of incomplete HTML tags. The template filter striptags is also vulnerable, because it is built on top of strip_tags().

IBM WebSphere Application Server Liberty 18.0.0.2 through 25.0.0.8 is vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

Directus is a real-time API and App dashboard for managing SQL database content. The `@directus/storage-driver-s3` package starting in version 9.22.0 and prior to version 12.0.1, corresponding to Directus starting in version 9.22.0 and prior to 11.5.0, is vulnerable to asset unavailability after a burst of malformed transformations. When making many malformed transformation requests at once, at some point, all assets are served as 403. This causes denial of assets for all policies of Directus, including Admin and Public. Version 12.0.1 of the `@directus/storage-driver-s3` package, corresponding to version 11.5.0 of Directus, fixes the issue.

Mastodon is a self-hosted, federated microblogging platform. Starting in version 4.2.0 and prior to versions 4.2.16 and 4.3.4, the rate limits are missing on `/auth/setup`. Without those rate limits, an attacker can craft requests that will send an email to an arbitrary addresses. Versions 4.2.16 and 4.3.4 fix the issue.

Dell PowerScale OneFS, versions 8.2.0.x-9.4.0.x contain allocation of Resources Without Limits or Throttling vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to denial of service and performance issue on that node.

XAPI open file limit DoS It is possible for an unauthenticated client on the network to cause XAPI to hit its file-descriptor limit. This causes XAPI to be unable to accept new requests for other (trusted) clients, and blocks XAPI from carrying out any tasks that require the opening of file descriptors.

An Allocation of Resources Without Limits or Throttling vulnerability in Cesanta Frozen versions less than 1.7 allows an attacker to induce a crash of the component embedding the library by supplying a maliciously crafted JSON as input.

An unauthenticated remote attacker can exploit the behavior of the pathfinder TCP encapsulation service by establishing a high number of TCP connections to the pathfinder TCP encapsulation service. The impact is limited to blocking of valid IPsec VPN peers.

Next.js is a React framework for building full-stack web applications. Starting in version 13.0.0 and prior to versions 13.5.8, 14.2.21, and 15.1.2, Next.js is vulnerable to a Denial of Service (DoS) attack that allows attackers to construct requests that leaves requests to Server Actions hanging until the hosting provider cancels the function execution. This vulnerability can also be used as a Denial of Wallet (DoW) attack when deployed in providers billing by response times. (Note: Next.js server is idle during that time and only keeps the connection open. CPU and memory footprint are low during that time.). Deployments without any protection against long running Server Action invocations are especially vulnerable. Hosting providers like Vercel or Netlify set a default maximum duration on function execution to reduce the risk of excessive billing. This is the same issue as if the incoming HTTP request has an invalid `Content-Length` header or never closes. If the host has no other mitigations to those then this vulnerability is novel. This vulnerability affects only Next.js deployments using Server Actions. The issue was resolved in Next.js 13.5.8, 14.2.21, and 15.1.2. We recommend that users upgrade to a safe version. There are no official workarounds.

In Bitcoin Core before 0.21.0, an attacker could prevent a node from seeing a specific unconfirmed transaction, because transaction re-requests are mishandled.

An allocation of resources without limits or throttling [CWE-770] vulnerability in FortiOS versions 7.6.0, versions 7.4.4 through 7.4.0, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow a remote unauthenticated attacker to prevent access to the GUI via specially crafted requests directed at specific endpoints.

An issue was discovered in OPC Foundation OPCFoundation/UA-.NETStandard through 1.5.374.78. A remote attacker can send requests with invalid credentials and cause the server performance to degrade gradually.

An issue was discovered in Stormshield SNS before 4.2.3 (when the proxy is used). An attacker can saturate the proxy connection table. This would result in the proxy denying any new connections.

On MX Series platforms with MS-MPC/MS-MIC, an Allocation of Resources Without Limits or Throttling vulnerability in Juniper Networks Junos OS allows an unauthenticated network attacker to cause a partial Denial of Service (DoS) with a high rate of specific traffic. If a Class of Service (CoS) rule is attached to the service-set and a high rate of specific traffic is processed by this service-set, for some of the other traffic which has services applied and is being processed by this MS-MPC/MS-MIC drops will be observed. Continued receipted of this high rate of specific traffic will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on MX Series with MS-MPC/MS-MIC: All versions prior to 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.

Yeti bridges the gap between CTI and DFIR practitioners by providing a Forensics Intelligence platform and pipeline. Remote user-controlled data tags can reach a Unicode normalization with a compatibility form NFKD. Under Windows, such normalization is costly in resources and may lead to denial of service with attacks such as One Million Unicode payload. This can get worse with the use of special Unicode characters like U+2100 (℀), or U+2105 (℅) which could lead the payload size to be tripled. Versions prior to 2.1.11 are affected by this vulnerability. The patch is included in 2.1.11.

Kirby is a content management system. A vulnerability in versions prior to 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6 affects all Kirby sites with user accounts (unless Kirby's API and Panel are disabled in the config). The real-world impact of this vulnerability is limited, however we still recommend to update to one of the patch releases because they also fix more severe vulnerabilities. Kirby's authentication endpoint did not limit the password length. This allowed attackers to provide a password with a length up to the server's maximum request body length. Validating that password against the user's actual password requires hashing the provided password, which requires more CPU and memory resources (and therefore processing time) the longer the provided password gets. This could be abused by an attacker to cause the website to become unresponsive or unavailable. Because Kirby comes with a built-in brute force protection, the impact of this vulnerability is limited to 10 failed logins from each IP address and 10 failed logins for each existing user per hour. The problem has been patched in Kirby 3.5.8.3, 3.6.6.3, 3.7.5.2, 3.8.4.1, and 3.9.6. In all of the mentioned releases, the maintainers have added password length limits in the affected code so that passwords longer than 1000 bytes are immediately blocked, both when setting a password and when logging in.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in the Gif decoder. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. All users are advised to upgrade to v3.1.5 or v2.1.9.

On version 15.1.x before 15.1.3, 14.1.x before 14.1.3.1, and 13.1.x before 13.1.3.6, when the brute force protection feature of BIG-IP Advanced WAF or BIG-IP ASM is enabled on a virtual server and the virtual server is under brute force attack, the MySQL database may run out of disk space due to lack of row limit on undisclosed tables in the MYSQL database. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Matrix Media Repo (MMR) is a highly configurable multi-homeserver media repository for Matrix. MMR before version 1.3.5 is vulnerable to unbounded disk consumption, where an unauthenticated adversary can induce it to download and cache large amounts of remote media files. MMR's typical operating environment uses S3-like storage as a backend, with file-backed store as an alternative option. Instances using a file-backed store or those which self-host an S3 storage system are therefore vulnerable to a disk fill attack. Once the disk is full, authenticated users will be unable to upload new media, resulting in denial of service. For instances configured to use a cloud-based S3 storage option, this could result in high service fees instead of a denial of service. MMR 1.3.5 introduces a new default-on "leaky bucket" rate limit to reduce the amount of data a user can request at a time. This does not fully address the issue, but does limit an unauthenticated user's ability to request large amounts of data. Operators should note that the leaky bucket implementation introduced in MMR 1.3.5 requires the IP address associated with the request to be forwarded, to avoid mistakenly applying the rate limit to the reverse proxy instead. To avoid this issue, the reverse proxy should populate the X-Forwarded-For header when sending the request to MMR. Operators who cannot update may wish to lower the maximum file size they allow and implement harsh rate limits, though this can still lead to a large amount of data to be downloaded.

REXML is an XML toolkit for Ruby. The REXML gem before 3.2.6 has a denial of service vulnerability when it parses an XML that has many `<`s in an attribute value. Those who need to parse untrusted XMLs may be impacted to this vulnerability. The REXML gem 3.2.7 or later include the patch to fix this vulnerability. As a workaround, don't parse untrusted XMLs.

ImageSharp is a 2D graphics API. A vulnerability discovered in the ImageSharp library, where the processing of specially crafted files can lead to excessive memory usage in image decoders. The vulnerability is triggered when ImageSharp attempts to process image files that are designed to exploit this flaw. This flaw can be exploited to cause a denial of service (DoS) by depleting process memory, thereby affecting applications and services that rely on ImageSharp for image processing tasks. Users and administrators are advised to update to the latest version of ImageSharp that addresses this vulnerability to mitigate the risk of exploitation. The problem has been patched in v3.1.4 and v2.1.8.

Netty is an asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. The `HttpPostRequestDecoder` can be tricked to accumulate data. While the decoder can store items on the disk if configured so, there are no limits to the number of fields the form can have, an attacher can send a chunked post consisting of many small fields that will be accumulated in the `bodyListHttpData` list. The decoder cumulates bytes in the `undecodedChunk` buffer until it can decode a field, this field can cumulate data without limits. This vulnerability is fixed in 4.1.108.Final.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 13.2. When querying the repository branches through API, GitLab was ignoring a query parameter and returning a considerable amount of results.

nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability.

On WAGO PFC200 devices in different firmware versions with special crafted packets an attacker with network access to the device could cause a denial of service for the login service of the runtime.

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

Due to an allocation of resources without limits, an uncontrolled resource consumption vulnerability exists in Silicon Labs Ember ZNet SDK prior to v7.4.0.0 (delivered as part of Silicon Labs Gecko SDK v4.4.0) which may enable attackers to trigger a bus fault and crash of the device, requiring a reboot in order to rejoin the network.

Microsoft Communicator, and Communicator in Microsoft Office 2010 beta, allows remote attackers to cause a denial of service (memory consumption) via a large number of SIP INVITE requests, which trigger the creation of many sessions.

Dell PowerScale OneFS, versions 9.5.0.0 through 9.10.0.0, contains an uncontrolled resource consumption vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.