An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. Certain /cgi-bin/luci/admin endpoints are vulnerable to command injection. Attackers can exploit this by sending crafted payloads through parameters intended for the ping utility, enabling arbitrary command execution with root-level permissions on the device.

An issue was discovered on Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. The TELNET service is enabled by default with admin/admin as default credentials and is exposed over the LAN. The allows attackers to execute arbitrary commands with root-level permissions. Device setup does not require this password to be changed during setup in order to utilize the device. (However, the TELNET password is dictated by the current GUI password.)

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. A remote attacker (in proximity to a Wi-Fi network) can derive the default Wi-Fi PSK value via the last 4 octets of the BSSID.

Victure PC420 1.1.39 was discovered to use a weak encryption key for the file enabled_telnet.dat on the Micro SD card.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. The TELNET service is enabled by default and exposed over the LAN. The root account is accessible without a password, allowing attackers to achieve full control over the router remotely without any authentication.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent unauthenticated attacker to execute arbitrary OS commands by sending a specially crafted request to the product. Affected products and versions are as follows: WRC-X3200GST3-B v1.25 and earlier, WRC-G01-W v1.24 and earlier, and WMC-X1800GST-B v1.41 and earlier. Note that WMC-X1800GST-B is also included in e-Mesh Starter Kit "WMC-2LX-B".

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the enable parameter in the setMacFilterRules function.

A command injection vulnerability in WebAdmin of Sophos Firewall versions older than 21.0 MR2 (21.0.2) can lead to adjacent attackers achieving pre-auth code execution on High Availability (HA) auxiliary devices, if OTP authentication for the admin user is enabled.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the tz parameter in the setNtpCfg function.

Multiple TP-LINK products allow a network-adjacent unauthenticated attacker with access to the product to execute arbitrary OS commands. The affected device, with the initial configuration, allows login only from the LAN port or Wi-Fi.

Multiple TP-LINK products allow a network-adjacent unauthenticated attacker with access to the product from the LAN port or Wi-Fi to execute arbitrary OS commands on the product that has pre-specified target devices and blocked URLs in parental control settings.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

An unauthenticated remote code execution vulnerability was reported in some Motorola-branded Binatone Hubble Cameras that could allow an attacker on the same network unauthorized access to the device.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Brivo ACS100, ACS300 allows OS Command Injection, Bypassing Physical Security.This issue affects ACS100 (Network Adjacent Access), ACS300 (Physical Access): from 5.2.4 before 6.2.4.3.

D-Link G416 cfgsave backusb Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21288.

D-Link G416 nodered gz File Handling Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21809.

D-Link G416 awsfile chmod Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21298.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker via the vulnerable /sqfs/lib/libsal.so.0.0 library used by a CGI application, as demonstrated by setup.cgi?token=';$HTTP_USER_AGENT;' with an OS command in the User-Agent field. This affects GC108P before 1.0.7.3, GC108PP before 1.0.7.3, GS108Tv3 before 7.0.6.3, GS110TPPv1 before 7.0.6.3, GS110TPv3 before 7.0.6.3, GS110TUPv1 before 1.0.4.3, GS710TUPv1 before 1.0.4.3, GS716TP before 1.0.2.3, GS716TPP before 1.0.2.3, GS724TPPv1 before 2.0.4.3, GS724TPv2 before 2.0.4.3, GS728TPPv2 before 6.0.6.3, GS728TPv2 before 6.0.6.3, GS752TPPv1 before 6.0.6.3, GS752TPv2 before 6.0.6.3, MS510TXM before 1.0.2.3, and MS510TXUP before 1.0.2.3.

D-Link G416 flupl query_type edit Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21299.

D-Link G416 awsfile tar File Handling Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21810.

D-Link G416 flupl filename Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21300.

D-Link G416 cfgsave Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21286.

D-Link G416 nodered File Handling Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21807.

D-Link G416 nodered chmod Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21296.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

An issue was discovered on D-Link DIR-802 A1 devices through 1.00b05. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the vendor_specific DHCP opcode. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12216.

NETGEAR RAX30 DHCP Server Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DHCP server. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19705.

D-Link DAP-1325 HNAP SetAPLanSettings PrimaryDNS Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18812.

D-Link DAP-1325 HNAP SetHostIPv6Settings IPv6Mode Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18815.

A remote code execution vulnerability affecting a Valmet DNA service listening on TCP port 1517, allows an attacker to execute commands with SYSTEM privileges This issue affects: Valmet DNA versions from Collection 2012 until Collection 2021.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_save.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12355.

D-Link DAP-1325 HNAP SetAPLanSettings DeviceName Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18808.

D-Link DAP-1325 HNAP SetAPLanSettings Gateway Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18809.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticPrefixLength Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18820.

D-Link DAP-1325 HNAP SetAPLanSettings SecondaryDNS Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18813.

D-Link DAP-1325 HNAP SetHostIPv6StaticSettings StaticDNS2 Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18819.

D-Link DAP-1325 HNAP SetAPLanSettings IPAddr Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1325 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of a request parameter provided to the HNAP1 SOAP endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-18810.

TP-Link TL-WR841N ated_tp Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR841N routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the ated_tp service. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21825.

Archer C1200 firmware versions prior to 'Archer C1200(JP)_V2_230508' and Archer C9 firmware versions prior to 'Archer C9(JP)_V3_230508' allow a network-adjacent unauthenticated attacker to execute arbitrary OS commands.

Multiple TP-LINK products allow a network-adjacent unauthenticated attacker to execute arbitrary OS commands. Affected products/versions are as follows: TL-WR802N firmware versions prior to 'TL-WR802N(JP)_V4_221008', TL-WR841N firmware versions prior to 'TL-WR841N(JP)_V14_230506', and TL-WR902AC firmware versions prior to 'TL-WR902AC(JP)_V3_230506'.

D-Link DIR-X3260 prog.cgi SOAPAction Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction request header provided to the prog.cgi endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20983.

A command injection vulnerability in the Free Time WiFi hotspot feature of the Zyxel USG FLEX series firmware versions 4.50 through 5.36 Patch 2 and VPN series firmware versions 4.20 through 5.36 Patch 2, could allow an unauthenticated, LAN-based attacker to execute some OS commands on an affected device.

WSR-1166DHP3 firmware Ver.1.16 and prior and WSR-1166DHP4 firmware Ver.1.02 and prior allow an attacker to execute arbitrary OS commands with root privileges via unspecified vectors.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the YouTube plugin for the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19222.

An unauthenticated command injection vulnerability exists in the parameters of operation 41 in the controller_server service on Gryphon Tower routers. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the controller_server service on port 9999.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-825 1.0.9/EE routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the xupnpd service, which listens on TCP port 4044. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-19464.

An unauthenticated command injection vulnerability exists in the parameters of operation 48 in the controller_server service on Gryphon Tower routers. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the controller_server service on port 9999.

An unauthenticated command injection vulnerability exists in the parameters of operation 10 in the controller_server service on Gryphon Tower routers. An unauthenticated remote attacker on the same network can execute commands as root on the device by sending a specially crafted malicious packet to the controller_server service on port 9999.