In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix repeated calls to sock_put() when msg has more_data In tcp_bpf_send_verdict() redirection, the eval variable is assigned to __SK_REDIRECT after the apply_bytes data is sent, if msg has more_data, sock_put() will be called multiple times. We should reset the eval variable to __SK_NONE every time more_data starts. This causes: IPv4: Attempt to release TCP socket in state 1 00000000b4c925d7 ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0x110 Modules linked in: CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded Not tainted 6.0.0 #1 Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014 Call Trace: <TASK> __tcp_transmit_skb+0xa1b/0xb90 ? __alloc_skb+0x8c/0x1a0 ? __kmalloc_node_track_caller+0x184/0x320 tcp_write_xmit+0x22a/0x1110 __tcp_push_pending_frames+0x32/0xf0 do_tcp_sendpages+0x62d/0x640 tcp_bpf_push+0xae/0x2c0 tcp_bpf_sendmsg_redir+0x260/0x410 ? preempt_count_add+0x70/0xa0 tcp_bpf_send_verdict+0x386/0x4b0 tcp_bpf_sendmsg+0x21b/0x3b0 sock_sendmsg+0x58/0x70 __sys_sendto+0xfa/0x170 ? xfd_validate_state+0x1d/0x80 ? switch_fpu_return+0x59/0xe0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not allow CHAIN_ID to refer to another table When doing lookups for chains on the same batch by using its ID, a chain from a different table can be used. If a rule is added to a table but refers to a chain in a different table, it will be linked to the chain in table2, but would have expressions referring to objects in table1. Then, when table1 is removed, the rule will not be removed as its linked to a chain in table2. When expressions in the rule are processed or removed, that will lead to a use-after-free. When looking for chains by ID, use the table that was used for the lookup by name, and only return chains belonging to that same table.

In the Linux kernel, the following vulnerability has been resolved: ASoC: sof_es8336: fix possible use-after-free in sof_es8336_remove() sof_es8336_remove() calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix use-after-free on probe deferral The bridge counter was never reset when tearing down the DRM device so that stale pointers to deallocated structures would be accessed on the next tear down (e.g. after a second late bind deferral). Given enough bridges and a few probe deferrals this could currently also lead to data beyond the bridge array being corrupted. Patchwork: https://patchwork.freedesktop.org/patch/502665/

A use-after-free flaw was found in the Linux kernel’s nouveau driver in how a user triggers a memory overflow that causes the nvkm_vma_tail function to fail. This flaw allows a local user to crash or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'") will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq() can free bfqq first, and then call bic_set_bfqq(), which will cause uaf. Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq().

In the Linux kernel, the following vulnerability has been resolved: android: binder: stop saving a pointer to the VMA Do not record a pointer to a VMA outside of the mmap_lock for later use. This is unsafe and there are a number of failure paths *after* the recorded VMA pointer may be freed during setup. There is no callback to the driver to clear the saved pointer from generic mm code. Furthermore, the VMA pointer may become stale if any number of VMA operations end up freeing the VMA so saving it was fragile to being with. Instead, change the binder_alloc struct to record the start address of the VMA and use vma_lookup() to get the vma when needed. Add lockdep mmap_lock checks on updates to the vma pointer to ensure the lock is held and depend on that lock for synchronization of readers and writers - which was already the case anyways, so the smp_wmb()/smp_rmb() was not necessary. [akpm@linux-foundation.org: fix drivers/android/binder_alloc_selftest.c]

In the Linux kernel, the following vulnerability has been resolved: drm/msm/hdmi: fix memory corruption with too many bridges Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Patchwork: https://patchwork.freedesktop.org/patch/502670/

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map use-after-free when handling missing device in read_one_chunk Store the error code before freeing the extent_map. Though it's reference counted structure, in that function it's the first and last allocation so this would lead to a potential use-after-free. The error can happen eg. when chunk is stored on a missing device and the degraded mount option is missing. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216721

In the Linux kernel, the following vulnerability has been resolved: blk-mq: use quiesced elevator switch when reinitializing queues The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below). Use the quiesced elevator switch instead, and make the previous one static since it is now only used locally. nvme nvme0: resetting controller nvme nvme0: 32/0/0 default/read/poll queues BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0 Oops: 0000 [#1] SMP PTI Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:kyber_has_work+0x29/0x70 ... Call Trace: __blk_mq_do_dispatch_sched+0x83/0x2b0 __blk_mq_sched_dispatch_requests+0x12e/0x170 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x2b/0x50 process_one_work+0x1ef/0x380 worker_thread+0x2d/0x3e0

In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: Fix possible UAF in tsi148_dma_list_add Smatch report warning as follows: drivers/staging/vme_user/vme_tsi148.c:1757 tsi148_dma_list_add() warn: '&entry->list' not removed from list In tsi148_dma_list_add(), the error path "goto err_dma" will not remove entry->list from list->entries, but entry will be freed, then list traversal may cause UAF. Fix by removeing it from list->entries before free().

In the Linux kernel, the following vulnerability has been resolved: parisc: Fix locking in pdc_iodc_print() firmware call Utilize pdc_lock spinlock to protect parallel modifications of the iodc_dbuf[] buffer, check length to prevent buffer overflow of iodc_dbuf[], drop the iodc_retbuf[] buffer and fix some wrong indentings.

In the Linux kernel, the following vulnerability has been resolved: io_uring/af_unix: defer registered files gc to io_uring release Instead of putting io_uring's registered files in unix_gc() we want it to be done by io_uring itself. The trick here is to consider io_uring registered files for cycle detection but not actually putting them down. Because io_uring can't register other ring instances, this will remove all refs to the ring file triggering the ->release path and clean up with io_ring_ctx_free(). [axboe: add kerneldoc comment to skb, fold in skb leak fix]

In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: adopts refcnt to avoid UAF dvb_unregister_device() is known that prone to use-after-free. That is, the cleanup from dvb_unregister_device() releases the dvb_device even if there are pointers stored in file->private_data still refer to it. This patch adds a reference counter into struct dvb_device and delays its deallocation until no pointer refers to the object.

In the Linux kernel, the following vulnerability has been resolved: igb: Do not free q_vector unless new one was allocated Avoid potential use-after-free condition under memory pressure. If the kzalloc() fails, q_vector will be freed but left in the original adapter->q_vector[v_idx] array position.

In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Avoid double destroy of default endpoint The rpmsg_dev_remove() in rpmsg_core is the place for releasing this default endpoint. So need to avoid destroying the default endpoint in rpmsg_chrdev_eptdev_destroy(), this should be the same as rpmsg_eptdev_release(). Otherwise there will be double destroy issue that ept->refcount report warning: refcount_t: underflow; use-after-free. Call trace: refcount_warn_saturate+0xf8/0x150 virtio_rpmsg_destroy_ept+0xd4/0xec rpmsg_dev_remove+0x60/0x70 The issue can be reproduced by stopping remoteproc before closing the /dev/rpmsgX.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() There is an use-after-free reported by KASAN: BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82 Read of size 1 at addr ffff888112afc460 by task modprobe/2111 CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), Call Trace: <TASK> kasan_report+0xae/0xe0 acpi_ut_remove_reference+0x3b/0x82 acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5 acpi_ds_store_object_to_local+0x15d/0x3a0 acpi_ex_store+0x78d/0x7fd acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b acpi_ps_parse_aml+0x217/0x8d5 ... </TASK> The root cause of the problem is that the acpi_operand_object is freed when acpi_ut_walk_package_tree() fails in acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in acpi_ut_copy_iobject_to_iobject(). The problem was introduced by "8aa5e56eeb61" commit, this commit is to fix memory leak in acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove operation, lead to "acpi_operand_object" used after free. Fix it by removing acpi_ut_remove_reference() in acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage() is called to copy an internal package object into another internal package object, when it fails, the memory of acpi_operand_object should be freed by the caller.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in bpf_uprobe_multi_link_attach() If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the error_free label and frees the array of bpf_uprobe's without calling bpf_uprobe_unregister(). This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer without removing it from the uprobe->consumers list.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: fix memory corruption with too many bridges Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Patchwork: https://patchwork.freedesktop.org/patch/502668/

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix error code path in acpi_ds_call_control_method() A use-after-free in acpi_ps_parse_aml() after a failing invocaion of acpi_ds_call_control_method() is reported by KASAN [1] and code inspection reveals that next_walk_state pushed to the thread by acpi_ds_create_walk_state() is freed on errors, but it is not popped from the thread beforehand. Thus acpi_ds_get_current_walk_state() called by acpi_ps_parse_aml() subsequently returns it as the new walk state which is incorrect. To address this, make acpi_ds_call_control_method() call acpi_ds_pop_walk_state() to pop next_walk_state from the thread before returning an error.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9381/1: kasan: clear stale stack poison We found below OOB crash: [ 33.452494] ================================================================== [ 33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0 [ 33.455515] [ 33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.1.25-mainline #1 [ 33.456880] Hardware name: Generic DT based system [ 33.457555] unwind_backtrace from show_stack+0x18/0x1c [ 33.458326] show_stack from dump_stack_lvl+0x40/0x4c [ 33.459072] dump_stack_lvl from print_report+0x158/0x4a4 [ 33.459863] print_report from kasan_report+0x9c/0x148 [ 33.460616] kasan_report from kasan_check_range+0x94/0x1a0 [ 33.461424] kasan_check_range from memset+0x20/0x3c [ 33.462157] memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.463064] refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c [ 33.464181] tick_nohz_idle_stop_tick from do_idle+0x264/0x354 [ 33.465029] do_idle from cpu_startup_entry+0x20/0x24 [ 33.465769] cpu_startup_entry from rest_init+0xf0/0xf4 [ 33.466528] rest_init from arch_post_acpi_subsys_init+0x0/0x18 [ 33.467397] [ 33.467644] The buggy address belongs to stack of task swapper/0/0 [ 33.468493] and is located at offset 112 in frame: [ 33.469172] refresh_cpu_vm_stats.constprop.0+0x0/0x2ec [ 33.469917] [ 33.470165] This frame has 2 objects: [ 33.470696] [32, 76) 'global_zone_diff' [ 33.470729] [112, 276) 'global_node_diff' [ 33.471294] [ 33.472095] The buggy address belongs to the physical page: [ 33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03 [ 33.473944] flags: 0x1000(reserved|zone=0) [ 33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001 [ 33.475656] raw: 00000000 [ 33.476050] page dumped because: kasan: bad access detected [ 33.476816] [ 33.477061] Memory state around the buggy address: [ 33.477732] c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.478630] c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 [ 33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1 [ 33.480415] ^ [ 33.481195] c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3 [ 33.482088] c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.482978] ================================================================== We find the root cause of this OOB is that arm does not clear stale stack poison in the case of cpuidle. This patch refer to arch/arm64/kernel/sleep.S to resolve this issue. From cited commit [1] that explain the problem Functions which the compiler has instrumented for KASAN place poison on the stack shadow upon entry and remove this poison prior to returning. In the case of cpuidle, CPUs exit the kernel a number of levels deep in C code. Any instrumented functions on this critical path will leave portions of the stack shadow poisoned. If CPUs lose context and return to the kernel via a cold path, we restore a prior context saved in __cpu_suspend_enter are forgotten, and we never remove the poison they placed in the stack shadow area by functions calls between this and the actual exit of the kernel. Thus, (depending on stackframe layout) subsequent calls to instrumented functions may hit this stale poison, resulting in (spurious) KASAN splats to the console. To avoid this, clear any stale poison from the idle thread for a CPU prior to bringing a CPU online. From cited commit [2] Extend to check for CONFIG_KASAN_STACK [1] commit 0d97e6d8024c ("arm64: kasan: clear stale stack poison") [2] commit d56a9ef84bd0 ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK")

In the Linux kernel, the following vulnerability has been resolved: sched: sch_cake: fix bulk flow accounting logic for host fairness In sch_cake, we keep track of the count of active bulk flows per host, when running in dst/src host fairness mode, which is used as the round-robin weight when iterating through flows. The count of active bulk flows is updated whenever a flow changes state. This has a peculiar interaction with the hash collision handling: when a hash collision occurs (after the set-associative hashing), the state of the hash bucket is simply updated to match the new packet that collided, and if host fairness is enabled, that also means assigning new per-host state to the flow. For this reason, the bulk flow counters of the host(s) assigned to the flow are decremented, before new state is assigned (and the counters, which may not belong to the same host anymore, are incremented again). Back when this code was introduced, the host fairness mode was always enabled, so the decrement was unconditional. When the configuration flags were introduced the *increment* was made conditional, but the *decrement* was not. Which of course can lead to a spurious decrement (and associated wrap-around to U16_MAX). AFAICT, when host fairness is disabled, the decrement and wrap-around happens as soon as a hash collision occurs (which is not that common in itself, due to the set-associative hashing). However, in most cases this is harmless, as the value is only used when host fairness mode is enabled. So in order to trigger an array overflow, sch_cake has to first be configured with host fairness disabled, and while running in this mode, a hash collision has to occur to cause the overflow. Then, the qdisc has to be reconfigured to enable host fairness, which leads to the array out-of-bounds because the wrapped-around value is retained and used as an array index. It seems that syzbot managed to trigger this, which is quite impressive in its own right. This patch fixes the issue by introducing the same conditional check on decrement as is used on increment. The original bug predates the upstreaming of cake, but the commit listed in the Fixes tag touched that code, meaning that this patch won't apply before that.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix oops when HEVC init fails The stateless HEVC decoder saves the instance pointer in the context regardless if the initialization worked or not. This caused a use after free, when the pointer is freed in case of a failure in the deinit function. Only store the instance pointer when the initialization was successful, to solve this issue. Hardware name: Acer Tomato (rev3 - 4) board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] lr : vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] sp : ffff80008750bc20 x29: ffff80008750bc20 x28: ffff1299f6d70000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff80008750bc98 x22: 000000000000a003 x21: ffffd45c4cfae000 x20: 0000000000000010 x19: ffff1299fd668310 x18: 000000000000001a x17: 000000040044ffff x16: ffffd45cb15dc648 x15: 0000000000000000 x14: ffff1299c08da1c0 x13: ffffd45cb1f87a10 x12: ffffd45cb2f5fe80 x11: 0000000000000001 x10: 0000000000001b30 x9 : ffffd45c4d12b488 x8 : 1fffe25339380d81 x7 : 0000000000000001 x6 : ffff1299c9c06c00 x5 : 0000000000000132 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000010 x1 : ffff80008750bc98 x0 : 0000000000000000 Call trace: vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] vpu_dec_deinit+0x1c/0x30 [mtk_vcodec_dec] vdec_hevc_slice_deinit+0x30/0x98 [mtk_vcodec_dec] vdec_if_deinit+0x38/0x68 [mtk_vcodec_dec] mtk_vcodec_dec_release+0x20/0x40 [mtk_vcodec_dec] fops_vcodec_release+0x64/0x118 [mtk_vcodec_dec] v4l2_release+0x7c/0x100 __fput+0x80/0x2d8 __fput_sync+0x58/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xd8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 Code: d503201f f9401660 b900127f b900227f (f9400400)

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: fix memory corruption with too many bridges Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Patchwork: https://patchwork.freedesktop.org/patch/502664/

In the Linux kernel, the following vulnerability has been resolved: xhci: Remove device endpoints from bandwidth list when freeing the device Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge)

In the Linux kernel, the following vulnerability has been resolved: bpf, x86: fix freeing of not-finalized bpf_prog_pack syzbot reported a few issues with bpf_prog_pack [1], [2]. This only happens with multiple subprogs. In jit_subprogs(), we first call bpf_int_jit_compile() on each sub program. And then, we call it on each sub program again. jit_data is not freed in the first call of bpf_int_jit_compile(). Similarly we don't call bpf_jit_binary_pack_finalize() in the first call of bpf_int_jit_compile(). If bpf_int_jit_compile() failed for one sub program, we will call bpf_jit_binary_pack_finalize() for this sub program. However, we don't have a chance to call it for other sub programs. Then we will hit "goto out_free" in jit_subprogs(), and call bpf_jit_free on some subprograms that haven't got bpf_jit_binary_pack_finalize() yet. At this point, bpf_jit_binary_pack_free() is called and the whole 2MB page is freed erroneously. Fix this with a custom bpf_jit_free() for x86_64, which calls bpf_jit_binary_pack_finalize() if necessary. Also, with custom bpf_jit_free(), bpf_prog_aux->use_bpf_prog_pack is not needed any more, remove it. [1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f [2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix KASAN use-after-free Read in compute_effective_progs Syzbot found a Use After Free bug in compute_effective_progs(). The reproducer creates a number of BPF links, and causes a fault injected alloc to fail, while calling bpf_link_detach on them. Link detach triggers the link to be freed by bpf_link_free(), which calls __cgroup_bpf_detach() and update_effective_progs(). If the memory allocation in this function fails, the function restores the pointer to the bpf_cgroup_link on the cgroup list, but the memory gets freed just after it returns. After this, every subsequent call to update_effective_progs() causes this already deallocated pointer to be dereferenced in prog_list_length(), and triggers KASAN UAF error. To fix this issue don't preserve the pointer to the prog or link in the list, but remove it and replace it with a dummy prog without shrinking the table. The subsequent call to __cgroup_bpf_detach() or __cgroup_bpf_detach() will correct it.

In the Linux kernel, the following vulnerability has been resolved: spi: Fix simplification of devm_spi_register_controller This reverts commit 59ebbe40fb51 ("spi: simplify devm_spi_register_controller"). If devm_add_action() fails in devm_add_action_or_reset(), devm_spi_unregister() will be called, it decreases the refcount of 'ctlr->dev' to 0, then it will cause uaf in the drivers that calling spi_put_controller() in error path.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit() > ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb); may be schedule, and then complete before the line > ndev->stats.tx_bytes += skb->len; [ 46.912801] ================================================================== [ 46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328 [ 46.935991] [ 46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G O 5.4.199-[REDACTED] #1 [ 46.947255] Hardware name: [REDACTED] [ 46.954568] Call trace: [ 46.957037] dump_backtrace+0x0/0x2b8 [ 46.960719] show_stack+0x24/0x30 [ 46.964052] dump_stack+0x128/0x194 [ 46.967557] print_address_description.isra.0+0x64/0x380 [ 46.972877] __kasan_report+0x1d4/0x240 [ 46.976723] kasan_report+0xc/0x18 [ 46.980138] __asan_report_load4_noabort+0x18/0x20 [ 46.985027] brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.990613] dev_hard_start_xmit+0x1bc/0xda0 [ 46.994894] sch_direct_xmit+0x198/0xd08 [ 46.998827] __qdisc_run+0x37c/0x1dc0 [ 47.002500] __dev_queue_xmit+0x1528/0x21f8 [ 47.006692] dev_queue_xmit+0x24/0x30 [ 47.010366] neigh_resolve_output+0x37c/0x678 [ 47.014734] ip_finish_output2+0x598/0x2458 [ 47.018927] __ip_finish_output+0x300/0x730 [ 47.023118] ip_output+0x2e0/0x430 [ 47.026530] ip_local_out+0x90/0x140 [ 47.030117] igmpv3_sendpack+0x14c/0x228 [ 47.034049] igmpv3_send_cr+0x384/0x6b8 [ 47.037895] igmp_ifc_timer_expire+0x4c/0x118 [ 47.042262] call_timer_fn+0x1cc/0xbe8 [ 47.046021] __run_timers+0x4d8/0xb28 [ 47.049693] run_timer_softirq+0x24/0x40 [ 47.053626] __do_softirq+0x2c0/0x117c [ 47.057387] irq_exit+0x2dc/0x388 [ 47.060715] __handle_domain_irq+0xb4/0x158 [ 47.064908] gic_handle_irq+0x58/0xb0 [ 47.068581] el0_irq_naked+0x50/0x5c [ 47.072162] [ 47.073665] Allocated by task 328: [ 47.077083] save_stack+0x24/0xb0 [ 47.080410] __kasan_kmalloc.isra.0+0xc0/0xe0 [ 47.084776] kasan_slab_alloc+0x14/0x20 [ 47.088622] kmem_cache_alloc+0x15c/0x468 [ 47.092643] __alloc_skb+0xa4/0x498 [ 47.096142] igmpv3_newpack+0x158/0xd78 [ 47.099987] add_grhead+0x210/0x288 [ 47.103485] add_grec+0x6b0/0xb70 [ 47.106811] igmpv3_send_cr+0x2e0/0x6b8 [ 47.110657] igmp_ifc_timer_expire+0x4c/0x118 [ 47.115027] call_timer_fn+0x1cc/0xbe8 [ 47.118785] __run_timers+0x4d8/0xb28 [ 47.122457] run_timer_softirq+0x24/0x40 [ 47.126389] __do_softirq+0x2c0/0x117c [ 47.130142] [ 47.131643] Freed by task 180: [ 47.134712] save_stack+0x24/0xb0 [ 47.138041] __kasan_slab_free+0x108/0x180 [ 47.142146] kasan_slab_free+0x10/0x18 [ 47.145904] slab_free_freelist_hook+0xa4/0x1b0 [ 47.150444] kmem_cache_free+0x8c/0x528 [ 47.154292] kfree_skbmem+0x94/0x108 [ 47.157880] consume_skb+0x10c/0x5a8 [ 47.161466] __dev_kfree_skb_any+0x88/0xa0 [ 47.165598] brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil] [ 47.171023] brcmf_txfinalize+0xec/0x190 [brcmfmac] [ 47.176016] brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac] [ 47.182056] brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac] [ 47.187568] brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac] [ 47.192529] brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac] [ 47.197859] process_one_work+0x7fc/0x1a80 [ 47.201965] worker_thread+0x31c/0xc40 [ 47.205726] kthread+0x2d8/0x370 [ 47.208967] ret_from_fork+0x10/0x18 [ 47.212546] [ 47.214051] The buggy address belongs to the object at ffffff803f588280 [ 47.214051] which belongs to the cache skbuff_head_cache of size 208 [ 47.227086] The buggy address is located 104 bytes inside of [ 47.227086] 208-byte region [ffffff803f588280, ffffff803f588350) [ 47.238814] The buggy address belongs to the page: [ 47.243618] page:ffffffff00dd6200 refcount:1 mapcou ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sctp: handle the error returned from sctp_auth_asoc_init_active_key When it returns an error from sctp_auth_asoc_init_active_key(), the active_key is actually not updated. The old sh_key will be freeed while it's still used as active key in asoc. Then an use-after-free will be triggered when sending patckets, as found by syzbot: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:132 [inline] sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863 sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 This patch is to fix it by not replacing the sh_key when it returns errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key(). For sctp_auth_set_active_key(), old active_key_id will be set back to asoc->active_key_id when the same thing happens.

In the Linux kernel, the following vulnerability has been resolved: ath9k: fix use-after-free in ath9k_hif_usb_rx_cb Syzbot reported use-after-free Read in ath9k_hif_usb_rx_cb() [0]. The problem was in incorrect htc_handle->drv_priv initialization. Probable call trace which can trigger use-after-free: ath9k_htc_probe_device() /* htc_handle->drv_priv = priv; */ ath9k_htc_wait_for_target() <--- Failed ieee80211_free_hw() <--- priv pointer is freed <IRQ> ... ath9k_hif_usb_rx_cb() ath9k_hif_usb_rx_stream() RX_STAT_INC() <--- htc_handle->drv_priv access In order to not add fancy protection for drv_priv we can move htc_handle->drv_priv initialization at the end of the ath9k_htc_probe_device() and add helper macro to make all *_STAT_* macros NULL safe, since syzbot has reported related NULL deref in that macros [1]

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_network_name_deleted() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe() When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function gp_auxiliary_device_release() calls ida_free() and kfree(aux_device_wrapper) to free memory. We should't call them again in the error handling path. Fix this by skipping the redundant cleanup functions.

A buffer overflow vulnerability was found in the Netfilter subsystem in the Linux Kernel. This issue could allow the leakage of both stack and heap addresses, and potentially allow Local Privilege Escalation to the root user via arbitrary code execution.

In the Linux kernel, the following vulnerability has been resolved: tpm_tis_spi: Account for SPI header when allocating TPM SPI xfer buffer The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the maximum transfer length and the size of the transfer buffer. As such, it does not account for the 4 bytes of header that prepends the SPI data frame. This can result in out-of-bounds accesses and was confirmed with KASAN. Introduce SPI_HDRSIZE to account for the header and use to allocate the transfer buffer.

In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix use-after-free bug in smp_execute_task_sg() When executing SMP task failed, the smp_execute_task_sg() calls del_timer() to delete "slow_task->timer". However, if the timer handler sas_task_internal_timedout() is running, the del_timer() in smp_execute_task_sg() will not stop it and a UAF will happen. The process is shown below: (thread 1) | (thread 2) smp_execute_task_sg() | sas_task_internal_timedout() ... | del_timer() | ... | ... sas_free_task(task) | kfree(task->slow_task) //FREE| | task->slow_task->... //USE Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure the timer handler have finished before the "task->slow_task" is deallocated.

In the Linux kernel, the following vulnerability has been resolved: fs: fix UAF/GPF bug in nilfs_mdt_destroy In alloc_inode, inode_init_always() could return -ENOMEM if security_inode_alloc() fails, which causes inode->i_private uninitialized. Then nilfs_is_metadata_file_inode() returns true and nilfs_free_inode() wrongly calls nilfs_mdt_destroy(), which frees the uninitialized inode->i_private and leads to crashes(e.g., UAF/GPF). Fix this by moving security_inode_alloc just prior to this_cpu_inc(nr_inodes)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check gpio_id before used as array index [WHY & HOW] GPIO_ID_UNKNOWN (-1) is not a valid value for array index and therefore should be checked in advance. This fixes 5 OVERRUN issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Fix GEM handle creation ref-counting panfrost_gem_create_with_handle() previously returned a BO but with the only reference being from the handle, which user space could in theory guess and release, causing a use-after-free. Additionally if the call to panfrost_gem_mapping_get() in panfrost_ioctl_create_bo() failed then a(nother) reference on the BO was dropped. The _create_with_handle() is a problematic pattern, so ditch it and instead create the handle in panfrost_ioctl_create_bo(). If the call to panfrost_gem_mapping_get() fails then this means that user space has indeed gone behind our back and freed the handle. In which case just return an error code.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: remove irq disabling in vcn 5 suspend We do not directly enable/disable VCN IRQ in vcn 5.0.0. And we do not handle the IRQ state as well. So the calls to disable IRQ and set state are removed. This effectively gets rid of the warining of "WARN_ON(!amdgpu_irq_enabled(adev, src, type))" in amdgpu_irq_put().

In the Linux kernel, the following vulnerability has been resolved: HID: cp2112: prevent a buffer overflow in cp2112_xfer() Smatch warnings: drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy() 'data->block[1]' too small (33 vs 255) drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy() 'buf' too small (64 vs 255) The 'read_length' variable is provided by 'data->block[0]' which comes from user and it(read_length) can take a value between 0-255. Add an upper bound to 'read_length' variable to prevent a buffer overflow in memcpy().

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate data run offset This adds sanity checks for data run offset. We should make sure data run offset is legit before trying to unpack them, otherwise we may encounter use-after-free or some unexpected memory access behaviors. [ 82.940342] BUG: KASAN: use-after-free in run_unpack+0x2e3/0x570 [ 82.941180] Read of size 1 at addr ffff888008a8487f by task mount/240 [ 82.941670] [ 82.942069] CPU: 0 PID: 240 Comm: mount Not tainted 5.19.0+ #15 [ 82.942482] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 82.943720] Call Trace: [ 82.944204] <TASK> [ 82.944471] dump_stack_lvl+0x49/0x63 [ 82.944908] print_report.cold+0xf5/0x67b [ 82.945141] ? __wait_on_bit+0x106/0x120 [ 82.945750] ? run_unpack+0x2e3/0x570 [ 82.946626] kasan_report+0xa7/0x120 [ 82.947046] ? run_unpack+0x2e3/0x570 [ 82.947280] __asan_load1+0x51/0x60 [ 82.947483] run_unpack+0x2e3/0x570 [ 82.947709] ? memcpy+0x4e/0x70 [ 82.947927] ? run_pack+0x7a0/0x7a0 [ 82.948158] run_unpack_ex+0xad/0x3f0 [ 82.948399] ? mi_enum_attr+0x14a/0x200 [ 82.948717] ? run_unpack+0x570/0x570 [ 82.949072] ? ni_enum_attr_ex+0x1b2/0x1c0 [ 82.949332] ? ni_fname_type.part.0+0xd0/0xd0 [ 82.949611] ? mi_read+0x262/0x2c0 [ 82.949970] ? ntfs_cmp_names_cpu+0x125/0x180 [ 82.950249] ntfs_iget5+0x632/0x1870 [ 82.950621] ? ntfs_get_block_bmap+0x70/0x70 [ 82.951192] ? evict+0x223/0x280 [ 82.951525] ? iput.part.0+0x286/0x320 [ 82.951969] ntfs_fill_super+0x1321/0x1e20 [ 82.952436] ? put_ntfs+0x1d0/0x1d0 [ 82.952822] ? vsprintf+0x20/0x20 [ 82.953188] ? mutex_unlock+0x81/0xd0 [ 82.953379] ? set_blocksize+0x95/0x150 [ 82.954001] get_tree_bdev+0x232/0x370 [ 82.954438] ? put_ntfs+0x1d0/0x1d0 [ 82.954700] ntfs_fs_get_tree+0x15/0x20 [ 82.955049] vfs_get_tree+0x4c/0x130 [ 82.955292] path_mount+0x645/0xfd0 [ 82.955615] ? putname+0x80/0xa0 [ 82.955955] ? finish_automount+0x2e0/0x2e0 [ 82.956310] ? kmem_cache_free+0x110/0x390 [ 82.956723] ? putname+0x80/0xa0 [ 82.957023] do_mount+0xd6/0xf0 [ 82.957411] ? path_mount+0xfd0/0xfd0 [ 82.957638] ? __kasan_check_write+0x14/0x20 [ 82.957948] __x64_sys_mount+0xca/0x110 [ 82.958310] do_syscall_64+0x3b/0x90 [ 82.958719] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 82.959341] RIP: 0033:0x7fd0d1ce948a [ 82.960193] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 82.961532] RSP: 002b:00007ffe59ff69a8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 82.962527] RAX: ffffffffffffffda RBX: 0000564dcc107060 RCX: 00007fd0d1ce948a [ 82.963266] RDX: 0000564dcc107260 RSI: 0000564dcc1072e0 RDI: 0000564dcc10fce0 [ 82.963686] RBP: 0000000000000000 R08: 0000564dcc107280 R09: 0000000000000020 [ 82.964272] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564dcc10fce0 [ 82.964785] R13: 0000564dcc107260 R14: 0000000000000000 R15: 00000000ffffffff

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check msg_id before processing transcation [WHY & HOW] HDCP_MESSAGE_ID_INVALID (-1) is not a valid msg_id nor is it a valid array index, and it needs checking before used. This fixes 4 OVERRUN issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: mtd: core: add missing of_node_get() in dynamic partitions code This fixes unbalanced of_node_put(): [ 1.078910] 6 cmdlinepart partitions found on MTD device gpmi-nand [ 1.085116] Creating 6 MTD partitions on "gpmi-nand": [ 1.090181] 0x000000000000-0x000008000000 : "nandboot" [ 1.096952] 0x000008000000-0x000009000000 : "nandfit" [ 1.103547] 0x000009000000-0x00000b000000 : "nandkernel" [ 1.110317] 0x00000b000000-0x00000c000000 : "nanddtb" [ 1.115525] ------------[ cut here ]------------ [ 1.120141] refcount_t: addition on 0; use-after-free. [ 1.125328] WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0xdc/0x148 [ 1.133528] Modules linked in: [ 1.136589] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc7-next-20220930-04543-g8cf3f7 [ 1.146342] Hardware name: Freescale i.MX8DXL DDR3L EVK (DT) [ 1.151999] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.158965] pc : refcount_warn_saturate+0xdc/0x148 [ 1.163760] lr : refcount_warn_saturate+0xdc/0x148 [ 1.168556] sp : ffff800009ddb080 [ 1.171866] x29: ffff800009ddb080 x28: ffff800009ddb35a x27: 0000000000000002 [ 1.179015] x26: ffff8000098b06ad x25: ffffffffffffffff x24: ffff0a00ffffff05 [ 1.186165] x23: ffff00001fdf6470 x22: ffff800009ddb367 x21: 0000000000000000 [ 1.193314] x20: ffff00001fdfebe8 x19: ffff00001fdfec50 x18: ffffffffffffffff [ 1.200464] x17: 0000000000000000 x16: 0000000000000118 x15: 0000000000000004 [ 1.207614] x14: 0000000000000fff x13: ffff800009bca248 x12: 0000000000000003 [ 1.214764] x11: 00000000ffffefff x10: c0000000ffffefff x9 : 4762cb2ccb52de00 [ 1.221914] x8 : 4762cb2ccb52de00 x7 : 205d313431303231 x6 : 312e31202020205b [ 1.229063] x5 : ffff800009d55c1f x4 : 0000000000000001 x3 : 0000000000000000 [ 1.236213] x2 : 0000000000000000 x1 : ffff800009954be6 x0 : 000000000000002a [ 1.243365] Call trace: [ 1.245806] refcount_warn_saturate+0xdc/0x148 [ 1.250253] kobject_get+0x98/0x9c [ 1.253658] of_node_get+0x20/0x34 [ 1.257072] of_fwnode_get+0x3c/0x54 [ 1.260652] fwnode_get_nth_parent+0xd8/0xf4 [ 1.264926] fwnode_full_name_string+0x3c/0xb4 [ 1.269373] device_node_string+0x498/0x5b4 [ 1.273561] pointer+0x41c/0x5d0 [ 1.276793] vsnprintf+0x4d8/0x694 [ 1.280198] vprintk_store+0x164/0x528 [ 1.283951] vprintk_emit+0x98/0x164 [ 1.287530] vprintk_default+0x44/0x6c [ 1.291284] vprintk+0xf0/0x134 [ 1.294428] _printk+0x54/0x7c [ 1.297486] of_node_release+0xe8/0x128 [ 1.301326] kobject_put+0x98/0xfc [ 1.304732] of_node_put+0x1c/0x28 [ 1.308137] add_mtd_device+0x484/0x6d4 [ 1.311977] add_mtd_partitions+0xf0/0x1d0 [ 1.316078] parse_mtd_partitions+0x45c/0x518 [ 1.320439] mtd_device_parse_register+0xb0/0x274 [ 1.325147] gpmi_nand_probe+0x51c/0x650 [ 1.329074] platform_probe+0xa8/0xd0 [ 1.332740] really_probe+0x130/0x334 [ 1.336406] __driver_probe_device+0xb4/0xe0 [ 1.340681] driver_probe_device+0x3c/0x1f8 [ 1.344869] __driver_attach+0xdc/0x1a4 [ 1.348708] bus_for_each_dev+0x80/0xcc [ 1.352548] driver_attach+0x24/0x30 [ 1.356127] bus_add_driver+0x108/0x1f4 [ 1.359967] driver_register+0x78/0x114 [ 1.363807] __platform_driver_register+0x24/0x30 [ 1.368515] gpmi_nand_driver_init+0x1c/0x28 [ 1.372798] do_one_initcall+0xbc/0x238 [ 1.376638] do_initcall_level+0x94/0xb4 [ 1.380565] do_initcalls+0x54/0x94 [ 1.384058] do_basic_setup+0x1c/0x28 [ 1.387724] kernel_init_freeable+0x110/0x188 [ 1.392084] kernel_init+0x20/0x1a0 [ 1.395578] ret_from_fork+0x10/0x20 [ 1.399157] ---[ end trace 0000000000000000 ]--- [ 1.403782] ------------[ cut here ]------------

In the Linux kernel, the following vulnerability has been resolved: ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address On a Packard Bell Dot SC (Intel Atom N2600 model) there is a FPDT table which contains invalid physical addresses, with high bits set which fall outside the range of the CPU-s supported physical address range. Calling acpi_os_map_memory() on such an invalid phys address leads to the below WARN_ON in ioremap triggering resulting in an oops/stacktrace. Add code to verify the physical address before calling acpi_os_map_memory() to fix / avoid the oops. [ 1.226900] ioremap: invalid physical address 3001000000000000 [ 1.226949] ------------[ cut here ]------------ [ 1.226962] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:200 __ioremap_caller.cold+0x43/0x5f [ 1.226996] Modules linked in: [ 1.227016] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc3+ #490 [ 1.227029] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013 [ 1.227038] RIP: 0010:__ioremap_caller.cold+0x43/0x5f [ 1.227054] Code: 96 00 00 e9 f8 af 24 ff 89 c6 48 c7 c7 d8 0c 84 99 e8 6a 96 00 00 e9 76 af 24 ff 48 89 fe 48 c7 c7 a8 0c 84 99 e8 56 96 00 00 <0f> 0b e9 60 af 24 ff 48 8b 34 24 48 c7 c7 40 0d 84 99 e8 3f 96 00 [ 1.227067] RSP: 0000:ffffb18c40033d60 EFLAGS: 00010286 [ 1.227084] RAX: 0000000000000032 RBX: 3001000000000000 RCX: 0000000000000000 [ 1.227095] RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00000000ffffffff [ 1.227105] RBP: 3001000000000000 R08: 0000000000000000 R09: ffffb18c40033c18 [ 1.227115] R10: 0000000000000003 R11: ffffffff99d62fe8 R12: 0000000000000008 [ 1.227124] R13: 0003001000000000 R14: 0000000000001000 R15: 3001000000000000 [ 1.227135] FS: 0000000000000000(0000) GS:ffff913a3c080000(0000) knlGS:0000000000000000 [ 1.227146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.227156] CR2: 0000000000000000 CR3: 0000000018c26000 CR4: 00000000000006e0 [ 1.227167] Call Trace: [ 1.227176] <TASK> [ 1.227185] ? acpi_os_map_iomem+0x1c9/0x1e0 [ 1.227215] ? kmem_cache_alloc_trace+0x187/0x370 [ 1.227254] acpi_os_map_iomem+0x1c9/0x1e0 [ 1.227288] acpi_init_fpdt+0xa8/0x253 [ 1.227308] ? acpi_debugfs_init+0x1f/0x1f [ 1.227339] do_one_initcall+0x5a/0x300 [ 1.227406] ? rcu_read_lock_sched_held+0x3f/0x80 [ 1.227442] kernel_init_freeable+0x28b/0x2cc [ 1.227512] ? rest_init+0x170/0x170 [ 1.227538] kernel_init+0x16/0x140 [ 1.227552] ret_from_fork+0x1f/0x30 [ 1.227639] </TASK> [ 1.227647] irq event stamp: 186819 [ 1.227656] hardirqs last enabled at (186825): [<ffffffff98184a6e>] __up_console_sem+0x5e/0x70 [ 1.227672] hardirqs last disabled at (186830): [<ffffffff98184a53>] __up_console_sem+0x43/0x70 [ 1.227686] softirqs last enabled at (186576): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160 [ 1.227701] softirqs last disabled at (186569): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160 [ 1.227715] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure On error situation `clp->cl_cb_conn.cb_xprt` should not be given a reference to the xprt otherwise both client cleanup and the error handling path of the caller call to put it. Better to delay handing over the reference to a later branch. [ 72.530665] refcount_t: underflow; use-after-free. [ 72.531933] WARNING: CPU: 0 PID: 173 at lib/refcount.c:28 refcount_warn_saturate+0xcf/0x120 [ 72.533075] Modules linked in: nfsd(OE) nfsv4(OE) nfsv3(OE) nfs(OE) lockd(OE) compat_nfs_ssc(OE) nfs_acl(OE) rpcsec_gss_krb5(OE) auth_rpcgss(OE) rpcrdma(OE) dns_resolver fscache netfs grace rdma_cm iw_cm ib_cm sunrpc(OE) mlx5_ib mlx5_core mlxfw pci_hyperv_intf ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nft_counter xt_addrtype nft_compat br_netfilter bridge stp llc nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set overlay nf_tables nfnetlink crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xfs serio_raw virtio_net virtio_blk net_failover failover fuse [last unloaded: sunrpc] [ 72.540389] CPU: 0 PID: 173 Comm: kworker/u16:5 Tainted: G OE 5.15.82-dan #1 [ 72.541511] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+1084+97b81f61 04/01/2014 [ 72.542717] Workqueue: nfsd4_callbacks nfsd4_run_cb_work [nfsd] [ 72.543575] RIP: 0010:refcount_warn_saturate+0xcf/0x120 [ 72.544299] Code: 55 00 0f 0b 5d e9 01 50 98 00 80 3d 75 9e 39 08 00 0f 85 74 ff ff ff 48 c7 c7 e8 d1 60 8e c6 05 61 9e 39 08 01 e8 f6 51 55 00 <0f> 0b 5d e9 d9 4f 98 00 80 3d 4b 9e 39 08 00 0f 85 4c ff ff ff 48 [ 72.546666] RSP: 0018:ffffb3f841157cf0 EFLAGS: 00010286 [ 72.547393] RAX: 0000000000000026 RBX: ffff89ac6231d478 RCX: 0000000000000000 [ 72.548324] RDX: ffff89adb7c2c2c0 RSI: ffff89adb7c205c0 RDI: ffff89adb7c205c0 [ 72.549271] RBP: ffffb3f841157cf0 R08: 0000000000000000 R09: c0000000ffefffff [ 72.550209] R10: 0000000000000001 R11: ffffb3f841157ad0 R12: ffff89ac6231d180 [ 72.551142] R13: ffff89ac6231d478 R14: ffff89ac40c06180 R15: ffff89ac6231d4b0 [ 72.552089] FS: 0000000000000000(0000) GS:ffff89adb7c00000(0000) knlGS:0000000000000000 [ 72.553175] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 72.553934] CR2: 0000563a310506a8 CR3: 0000000109a66000 CR4: 0000000000350ef0 [ 72.554874] Call Trace: [ 72.555278] <TASK> [ 72.555614] svc_xprt_put+0xaf/0xe0 [sunrpc] [ 72.556276] nfsd4_process_cb_update.isra.11+0xb7/0x410 [nfsd] [ 72.557087] ? update_load_avg+0x82/0x610 [ 72.557652] ? cpuacct_charge+0x60/0x70 [ 72.558212] ? dequeue_entity+0xdb/0x3e0 [ 72.558765] ? queued_spin_unlock+0x9/0x20 [ 72.559358] nfsd4_run_cb_work+0xfc/0x270 [nfsd] [ 72.560031] process_one_work+0x1df/0x390 [ 72.560600] worker_thread+0x37/0x3b0 [ 72.561644] ? process_one_work+0x390/0x390 [ 72.562247] kthread+0x12f/0x150 [ 72.562710] ? set_kthread_struct+0x50/0x50 [ 72.563309] ret_from_fork+0x22/0x30 [ 72.563818] </TASK> [ 72.564189] ---[ end trace 031117b1c72ec616 ]--- [ 72.566019] list_add corruption. next->prev should be prev (ffff89ac4977e538), but was ffff89ac4763e018. (next=ffff89ac4763e018). [ 72.567647] ------------[ cut here ]------------

In the Linux kernel, the following vulnerability has been resolved: bfq: Avoid merging queues with different parents It can happen that the parent of a bfqq changes between the moment we decide two queues are worth to merge (and set bic->stable_merge_bfqq) and the moment bfq_setup_merge() is called. This can happen e.g. because the process submitted IO for a different cgroup and thus bfqq got reparented. It can even happen that the bfqq we are merging with has parent cgroup that is already offline and going to be destroyed in which case the merge can lead to use-after-free issues such as: BUG: KASAN: use-after-free in __bfq_deactivate_entity+0x9cb/0xa50 Read of size 8 at addr ffff88800693c0c0 by task runc:[2:INIT]/10544 CPU: 0 PID: 10544 Comm: runc:[2:INIT] Tainted: G E 5.15.2-0.g5fb85fd-default #1 openSUSE Tumbleweed (unreleased) f1f3b891c72369aebecd2e43e4641a6358867c70 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x46/0x5a print_address_description.constprop.0+0x1f/0x140 ? __bfq_deactivate_entity+0x9cb/0xa50 kasan_report.cold+0x7f/0x11b ? __bfq_deactivate_entity+0x9cb/0xa50 __bfq_deactivate_entity+0x9cb/0xa50 ? update_curr+0x32f/0x5d0 bfq_deactivate_entity+0xa0/0x1d0 bfq_del_bfqq_busy+0x28a/0x420 ? resched_curr+0x116/0x1d0 ? bfq_requeue_bfqq+0x70/0x70 ? check_preempt_wakeup+0x52b/0xbc0 __bfq_bfqq_expire+0x1a2/0x270 bfq_bfqq_expire+0xd16/0x2160 ? try_to_wake_up+0x4ee/0x1260 ? bfq_end_wr_async_queues+0xe0/0xe0 ? _raw_write_unlock_bh+0x60/0x60 ? _raw_spin_lock_irq+0x81/0xe0 bfq_idle_slice_timer+0x109/0x280 ? bfq_dispatch_request+0x4870/0x4870 __hrtimer_run_queues+0x37d/0x700 ? enqueue_hrtimer+0x1b0/0x1b0 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_update_offsets_now+0x6f/0x280 hrtimer_interrupt+0x2c8/0x740 Fix the problem by checking that the parent of the two bfqqs we are merging in bfq_setup_merge() is the same.

In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix memory corruption in VF driver Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled, when it requests a reset. If PF driver assumes that VF is disabled, while VF still has queues configured, VF may unmap DMA resources. In such scenario device still can map packets to memory, which ends up silently corrupting it. Previously, VF driver could experience memory corruption, which lead to crash: [ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237 [ 5119.170166] PGD 0 P4D 0 [ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI [ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G W I --------- - - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1 [ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019 [ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf] [ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30 [ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74 [ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282 [ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002 [ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203 [ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009 [ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000 [ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000 [ 5119.170269] FS: 0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000 [ 5119.170274] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0 [ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5119.170290] PKRU: 55555554 [ 5119.170292] Call Trace: [ 5119.170298] iavf_clean_rx_ring+0xad/0x110 [iavf] [ 5119.170324] iavf_free_rx_resources+0xe/0x50 [iavf] [ 5119.170342] iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf] [ 5119.170358] iavf_virtchnl_completion+0xd8a/0x15b0 [iavf] [ 5119.170377] ? iavf_clean_arq_element+0x210/0x280 [iavf] [ 5119.170397] iavf_adminq_task+0x126/0x2e0 [iavf] [ 5119.170416] process_one_work+0x18f/0x420 [ 5119.170429] worker_thread+0x30/0x370 [ 5119.170437] ? process_one_work+0x420/0x420 [ 5119.170445] kthread+0x151/0x170 [ 5119.170452] ? set_kthread_struct+0x40/0x40 [ 5119.170460] ret_from_fork+0x35/0x40 [ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas [ 5119.170613] i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf] [ 5119.170627] CR2: 00001b9780003237

In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Avoid use-after-free on suspend/resume hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is freed on suspend and reallocated on resume. So, hctx->user_data is invalid after resume, and it will cause use-after-free accessing which will result in the kernel crash something like below: [ 22.428391] Call Trace: [ 22.428899] <TASK> [ 22.429339] virtqueue_add_split+0x3eb/0x620 [ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0 [ 22.430789] ? kvm_clock_get_cycles+0x14/0x30 [ 22.431496] virtqueue_add_sgs+0xad/0xd0 [ 22.432108] virtblk_add_req+0xe8/0x150 [ 22.432692] virtio_queue_rqs+0xeb/0x210 [ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280 [ 22.434059] __blk_flush_plug+0xe1/0x140 [ 22.434853] blk_finish_plug+0x20/0x40 [ 22.435512] read_pages+0x20a/0x2e0 [ 22.436063] ? folio_add_lru+0x62/0xa0 [ 22.436652] page_cache_ra_unbounded+0x112/0x160 [ 22.437365] filemap_get_pages+0xe1/0x5b0 [ 22.437964] ? context_to_sid+0x70/0x100 [ 22.438580] ? sidtab_context_to_sid+0x32/0x400 [ 22.439979] filemap_read+0xcd/0x3d0 [ 22.440917] xfs_file_buffered_read+0x4a/0xc0 [ 22.441984] xfs_file_read_iter+0x65/0xd0 [ 22.442970] __kernel_read+0x160/0x2e0 [ 22.443921] bprm_execve+0x21b/0x640 [ 22.444809] do_execveat_common.isra.0+0x1a8/0x220 [ 22.446008] __x64_sys_execve+0x2d/0x40 [ 22.446920] do_syscall_64+0x37/0x90 [ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes this issue by getting vq from vblk, and removes virtblk_init_hctx().