Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability via the PinCode parameter at /API/info form endpoint.

Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via wizard_status.

An issue was discovered in Linksys Router E1700 version 1.0.04 (build 3), allows authenticated attackers to execute arbitrary code via the setDateTime function.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the iface parameter in the vif_disable function.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the iface parameter in the vif_enable function.

A Command Injection vulnerability exists in the do_upgrade_post function of the httpd binary in Linksys E1500 v1.0.06.001. As a result, an authenticated attacker can execute OS commands with root privileges.

A vulnerability was discovered in Linksys Router E2500 with firmware 2.0.00, allows authenticated attackers to execute arbitrary code via the hnd_parentalctrl_unblock function.

Linksys E8450 v1.2.00.360516 was discovered to contain a command injection vulnerability via userEmail.

On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability via the ipurl parameter at /API/info form endpoint.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.

Unsanitized user input in the web interface for Linksys WiFi extender products (RE6400 and RE6300 through 1.2.04.022) allows for remote command execution. An attacker can access system OS configurations and commands that are not intended for use beyond the web UI.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the devname parameter in the reset_wifi function.

There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters WL_atten_bb, WL_atten_radio, and WL_atten_ctl in the apply.cgi interface, thereby gaining shell privileges.

There is a command injection vulnerability in the Linksys WRT54GL router with firmware version 4.30.18.006. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.

There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ssid, wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pin_wps function.

A vulnerability has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this vulnerability is the function RP_UpgradeFWByBBS of the file /goform/RP_UpgradeFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function NTP of the file /goform/NTP. The manipulation of the argument manual_year_select/manual_month_select/manual_day_select/manual_hour_select/manual_min_select/manual_sec_select leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001 and classified as critical. Affected by this issue is the function RP_checkFWByBBS of the file /goform/RP_checkFWByBBS. The manipulation of the argument type/ch/ssidhex/security/extch/pwd/mode/ip/nm/gw leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected is the function wirelessAdvancedHidden of the file /goform/wirelessAdvancedHidden. The manipulation of the argument ExtChSelector/24GSelector/5GSelector leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. This vulnerability affects the function ssid1MACFilter of the file /goform/ssid1MACFilter. The manipulation of the argument apselect_%d/newap_text_%d leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been declared as critical. Affected by this vulnerability is the function WPS of the file /goform/WPS. The manipulation of the argument PIN leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. It has been rated as critical. Affected by this issue is the function verifyFacebookLike of the file /goform/verifyFacebookLike. The manipulation of the argument uid/accessToken leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys FGW3000-AH and FGW3000-HK up to 1.0.17.000000 and classified as critical. Affected by this issue is the function sub_4153FC of the file /cgi-bin/sysconf.cgi of the component HTTP POST Request Handler. The manipulation of the argument supplicant_rnd_id_en leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys FGW3000-AH and FGW3000-HK up to 1.0.17.000000. It has been classified as critical. This affects the function control_panel_sw of the file /cgi-bin/sysconf.cgi of the component HTTP POST Request Handler. The manipulation of the argument filename leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.ddnsStatus DynDNS function via the password parameter.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.ddnsStatus DynDNS function via the mailex parameter.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.InternetConnection function.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.ddnsStatus DynDNS function via the hostname parameter.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.ddnsStatus DynDNS function via the username parameter.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.emailReg function. The vulnerability can be triggered via the `pt["email"]` parameter.

In Linksys E5600 V1.1.0.26, the \usr\share\lua\runtime.lua file contains a command injection vulnerability in the runtime.pingTest function via the pt["count"] parameter.

In Linksys E5600 V1.1.0.26, the \usr\share\lua\runtime.lua file contains a command injection vulnerability in the runtime.pingTest function via the pt["pkgsize"] parameter.

Linksys E7350 1.1.00.032 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

Linksys E3000 1.0.06.002_US is vulnerable to command injection via the diag_ping_start function.

TP-Link TL-IPC42C V4.0_20211227_1.0.16 is vulnerable to command injection due to the lack of malicious code verification on both the frontend and backend.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.

A vulnerability was discovered in DI_8400-16.07.26A1, which has been classified as critical. This issue affects the upgrade_filter_asp function in the upgrade_filter.asp file. Manipulation of the path parameter can lead to command injection.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.

AX3000 Dual-Band Gigabit Wi-Fi 6 Router AX9 V22.03.01.46 and AX3000 Dual-Band Gigabit Wi-Fi 6 Router AX12 V1.0 V22.03.01.46 were discovered to contain an authenticated remote command execution (RCE) vulnerability via the macFilterType parameter at /goform/setMacFilterCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain a command injection vulnerability via the 'password' parameter in the setSSServer function.

TOTOLINK EX200 V4.0.3c.7646_B20201211 was discovered to contain a remote code execution (RCE) vulnerability via the langType parameter in the setLanguageCfg function.

Netgear R6850 1.1.0.88 was discovered to contain a command injection vulnerability via the ntp_server parameter.

A command injection vulnerability exists in local RACADM. A malicious authenticated user could gain control of the underlying operating system.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function sub_2EF50. This vulnerability allows attackers to execute arbitrary commands via the manual-time-string parameter.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function web_cert_download_handler. This vulnerability allows attackers to execute arbitrary commands via the certDownload parameter.

The 7520V3V1.0.0B09P27 version, and all earlier versions of ZTE product ZX297520V3 are impacted by a Command Injection vulnerability. Unauthorized users can exploit this vulnerability to control the user terminal system.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function pcap_download_handler. This vulnerability allows attackers to execute arbitrary commands via the update.device.packet-capture.tftp-file-name parameter.

D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a command injection vulnerability in the function config_upload_handler. This vulnerability allows attackers to execute arbitrary commands via the configRestore parameter.