In MPLS environments, receipt of a specific SNMP packet may cause the routing protocol daemon (RPD) process to crash and restart. By continuously sending a specially crafted SNMP packet, an attacker can repetitively crash the RPD process causing prolonged denial of service. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS : 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D48 on EX/QFX series; 15.1 versions prior to 15.1R4-S9, 15.1R7-S2; 15.1F6 versions prior to 15.1F6-S11; 15.1X49 versions prior to 15.1X49-D141, 15.1X49-D144, 15.1X49-D150 on SRX Series; 15.1X53 versions prior to 15.1X53-D234 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 15.1X53 versions prior to 15.1X53-D590 on EX2300/EX3400 Series; 15.1X54 on ACX Series; 16.1 versions prior to 16.1R3-S10, 16.1R4-S11, 16.1R6-S5, 16.1R7; 16.1X65 versions prior to 16.1X65-D48; 16.2 versions prior to 16.2R2-S6; 17.1 versions prior to 17.1R2-S8, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D92, 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R3; 17.4 versions prior to 17.4R1-S4, 17.4R2; 18.1 versions prior to 18.1R1-S1, 18.1R2-S1, 18.1R3; 18.2X75 versions prior to 18.2X75-D10.

When BGP tracing is enabled an incoming BGP message may cause the Junos OS routing protocol daemon (rpd) process to crash and restart. While rpd restarts after a crash, repeated crashes can result in an extended DoS condition. Affected releases are Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S4, 16.1R7-S5; 16.2 versions prior to 16.2R2-S9, 16.2R3; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3-S1; 17.3 versions prior to 17.3R3-S3, 17.3R3-S4, 17.3R4; 17.4 versions prior to 17.4R1-S7, 17.4R2-S3, 17.4R2-S4, 17.4R3; 18.1 versions prior to 18.1R2-S4, 18.1R3-S4, 18.1R4; 18.2 versions prior to 18.2R2-S2, 18.2R2-S3, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S3, 18.3R2; 18.4 versions prior to 18.4R1-S2, 18.4R2. This issue does not affect Junos releases prior to 16.1R1.

A vulnerability classified as critical was found in Contemporary Control System BASrouter BACnet BASRT-B 2.7.2. This vulnerability affects unknown code of the component Application Protocol Data Unit. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-263890 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered affecting Enrich 5.1.0 and below. It involves sending a maliciously crafted Snowplow event to the pipeline. Upon receiving this event and trying to validate it, Enrich crashes and attempts to restart indefinitely. As a result, event processing would be halted.

A vulnerability classified as critical has been found in TEM FLEX-1085 1.6.0. Affected is an unknown function of the file /sistema/flash/reboot. The manipulation leads to denial of service. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as problematic has been found in flar2 ElementalX up to 6.x on Nexus 9. Affected is the function xfrm_dump_policy_done of the file net/xfrm/xfrm_user.c of the component ipsec. The manipulation leads to denial of service. Upgrading to version 7.00 is able to address this issue. The name of the patch is 1df72c9f0f61304437f4f1037df03b5fb36d5a79. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-217152.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in blockmason credit-protocol. It has been declared as problematic. Affected by this vulnerability is the function executeUcacTx of the file contracts/CreditProtocol.sol of the component UCAC Handler. The manipulation leads to denial of service. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is named 082e01f18707ef995e80ebe97fcedb229a55efc5. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-252799. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

On BIG-IP versions 16.x before 16.1.0, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.4, and all versions of 13.1.x, 12.1.x, and 11.6.x, when a FastL4 profile and an HTTP profile are configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

The TCP Server module in toxcore before 0.2.8 doesn't free the TCP priority queue under certain conditions, which allows a remote attacker to exhaust the system's memory, causing a denial of service (DoS).

In Eclipse Jetty versions 10.0.0 thru 10.0.9, and 11.0.0 thru 11.0.9 versions, SslConnection does not release ByteBuffers from configured ByteBufferPool in case of error code paths.

A vulnerability has been found in OWASP NodeGoat and classified as problematic. This vulnerability affects unknown code of the file app/routes/research.js of the component Query Parameter Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The name of the patch is 4a4d1db74c63fb4ff8d366551c3af006c25ead12. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-216184.

A vulnerability was found in xml-conduit. It has been classified as problematic. Affected is an unknown function of the file xml-conduit/src/Text/XML/Stream/Parse.hs of the component DOCTYPE Entity Expansion Handler. The manipulation leads to infinite loop. It is possible to launch the attack remotely. Upgrading to version 1.9.1.0 is able to address this issue. The name of the patch is 4be1021791dcdee8b164d239433a2043dc0939ea. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-216204.

A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506.

A vulnerability was found in Solare Solar-Log 2.8.4-56/3.5.2-85. It has been classified as problematic. Affected is an unknown function. The manipulation leads to denial of service. It is possible to launch the attack remotely. Upgrading to version 3.5.3-86 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability was found in ghostlander Phoenixcoin. It has been classified as problematic. Affected is the function CTxMemPool::accept of the file src/main.cpp. The manipulation leads to denial of service. Upgrading to version 0.6.6.1-pxc is able to address this issue. The name of the patch is 987dd68f71a7d8276cef3b6c3d578fd4845b5699. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-217068.

An issue in Open 5GS v.2.7.1 allows a remote attacker to cause a denial of service via the Network Function Virtualizations (NFVs) such as the User Plane Function (UPF) and the Session Management Function (SMF), The Packet Data Unit (PDU) session establishment process.

The 'control' in Parrot ANAFI USA firmware 1.10.4 does not check the MAV_MISSION_TYPE(0, 1, 2, 255), which allows attacker to cut off the connection between a controller and the drone by sending MAVLink MISSION_COUNT command with a wrong MAV_MISSION_TYPE.

Configuration defects in the secure OS module.Successful exploitation of this vulnerability will affect availability.