https://www.hillstonenet.com.cn/ Hillstone Firewall SG-6000 <= 5.0.4.0 is vulnerable to Incorrect Access Control. There is a permission bypass vulnerability in the Hillstone WEB application firewall. An attacker can enter the background of the firewall with super administrator privileges through a configuration error in report.m.

Input passed to the Pdf() function is shell escaped and passed to child_process.exec() during PDF rendering. However, the shell escape does not properly encode all special characters, namely, semicolon and curly braces. This can be abused to achieve command execution. This problem affects nodepdf 1.3.0.

A vulnerability in lack of validation of user-supplied parameters pass to XML-RPC calls on SonicWall Global Management System (GMS) virtual appliance's, allow remote user to execute arbitrary code. This vulnerability affected GMS version 8.1 and earlier.

syscp 1.4.2.1 allows attackers to add arbitrary paths via the documentroot of a domain by appending a colon to it and setting the open basedir path to use that domain documentroot.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in yanyutao0402 ChanCMS up to 3.1.2. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /collect/getArticle. The manipulation of the argument taskUrl leads to deserialization. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.1.3 is able to address this issue. The patch is named 33d9bb464353015aaaba84e27638ac9a3912795d. It is recommended to upgrade the affected component.

D-Link DIR810LA1_FW102B22 was discovered to contain a command injection vulnerability via the Ping_addr function.

A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A remote code execution vulnerability exists in Microsoft SharePoint when the software fails to check the source markup of an application package, aka 'Microsoft SharePoint Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0594.

gdk-pixbuf through 2.31.1 has GIF loader buffer overflow when initializing decompression tables due to an input validation flaw

Aria Operations for Networks contains a command injection vulnerability. A malicious actor with network access to VMware Aria Operations for Networks may be able to perform a command injection attack resulting in remote code execution.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Apache OFBiz 12.04.x before 12.04.06 and 13.07.x before 13.07.03 allow remote attackers to execute arbitrary commands via a crafted serialized Java object, related to the Apache Commons Collections library.

A pre-auth command injection vulnerability in the warn-proceed handler of Sophos Web Appliance older than version 4.3.10.4 allows execution of arbitrary code.

Improper Input Validation in GitHub repository firefly-iii/firefly-iii prior to 6.0.0.

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow execution of commands due to lack of validation of the shell meta characters with the value of 'model_name' or 'mac_address'.

Drupal before 7.58, 8.x before 8.3.9, 8.4.x before 8.4.6, and 8.5.x before 8.5.1 allows remote attackers to execute arbitrary code because of an issue affecting multiple subsystems with default or common module configurations.

The $smarty.template variable in Smarty3 allows attackers to possibly execute arbitrary PHP code via the sysplugins/smarty_internal_compile_private_special_variable.php file.

D-Link DSL-2750B devices before 1.05 allow remote unauthenticated command injection via the login.cgi cli parameter, as exploited in the wild in 2016 through 2022.

(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands.

org.springframework.core.serializer.DefaultDeserializer in Spring AMQP before 1.5.5 allows remote attackers to execute arbitrary code.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow execution of commands due to lack of validation of the shell meta characters with the value of 'network.ieee8021x.delete_certs'.

Varnish 2.0.6 writes data to a log file without sanitizing non-printable characters, which might allow remote attackers to modify a window's title, or possibly execute arbitrary commands or overwrite files, via an HTTP request containing an escape sequence for a terminal emulator. NOTE: the vendor disputes the significance of this report, stating that "This is not a security problem in Varnish or any other piece of software which writes a logfile. The real problem is the mistaken belief that you can cat(1) a random logfile to your terminal safely.

On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.

A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. Affected is an unknown function of the component Static Routing Configuration Handler. The manipulation of the argument next-hop-interface leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. VDB-223302 is the identifier assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

The plural form formula in ngettext family of calls in php-gettext before 1.0.12 allows remote attackers to execute arbitrary code.

Rbot Reaction plugin allows command execution

Unspecified vulnerability in statusnet through 2010 due to the way addslashes are used in SQL string escapes..

Multipart-file uploads call variables to be improperly registered in the global scope. In cases where variables are not declared explicitly before being used this can lead to unexpected behavior. This affects all supported versions of HHVM prior to the patch (3.25.1, 3.24.5, and 3.21.9 and below).

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

A vulnerability, which was classified as critical, has been found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. This issue affects some unknown processing of the component NAT Configuration Handler. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier VDB-223301 was assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

The hhvm-attach deep link handler in Nuclide did not properly sanitize the provided hostname parameter when rendering. As a result, a malicious URL could be used to render HTML and other content inside of the editor's context, which could potentially be chained to lead to code execution. This issue affected Nuclide prior to v0.290.0.

Command Injection in GitHub repository microweber/microweber prior to 1.3.3.

An issue was identified in GitLab CE/EE affecting all versions from 1.0 prior to 15.8.5, 15.9 prior to 15.9.4, and 15.10 prior to 15.10.1 where non-printable characters gets copied from clipboard, allowing unexpected commands to be executed on victim machine.

Action Pack is a framework for handling and responding to web requests. Since 6.1.0, the application configurable Permissions-Policy is only served on responses with an HTML related Content-Type. This vulnerability is fixed in 6.1.7.8, 7.0.8.2, and 7.1.3.3.

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow execution of commands due to lack of validation of the shell meta characters with the value of 'system.opkg.remove'.

pretix before 2024.1.1 mishandles file validation.

The isMail transport in PHPMailer before 5.2.20 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code by leveraging improper interaction between the escapeshellarg function and internal escaping performed in the mail function in PHP. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-10033.

A command-injection vulnerability in the Image Upload function of the NASCENT RemKon Device Manager 4.0.0.0 allows attackers to execute arbitrary commands, as root, via shell metacharacters in the filename parameter to assets/index.php.

Baicells EG7035-M11 devices with firmware through BCE-ODU-1.0.8 are vulnerable to improper code exploitation via HTTP GET command injections. Commands are executed using pre-login execution and executed with root permissions. The following methods have been tested and validated by a 3rd party analyst and have been confirmed exploitable special thanks to Lionel Musonza for the discovery.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

A remote code execution vulnerability is present in network-listening components in some versions of ArubaOS. An attacker with the ability to transmit specially-crafted IP traffic to a mobility controller could exploit this vulnerability and cause a process crash or to execute arbitrary code within the underlying operating system with full system privileges. Such an attack could lead to complete system compromise. The ability to transmit traffic to an IP interface on the mobility controller is required to carry out an attack. The attack leverages the PAPI protocol (UDP port 8211). If the mobility controller is only bridging L2 traffic to an uplink and does not have an IP address that is accessible to the attacker, it cannot be attacked.

A command injection vulnerability in egg-scripts <v2.8.1 allows arbitrary shell command execution through a maliciously crafted command line argument.

A vulnerability was found in TRENDnet TEW-652BRP 3.04b01. It has been classified as critical. Affected is an unknown function of the file ping.ccp of the component Web Interface. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-220020.

Insufficient URI encoding in restforce before 3.0.0 allows attacker to inject arbitrary parameters into Salesforce API requests.

Transmission before 1.92 allows an attacker to cause a denial of service (crash) or possibly have other unspecified impact via a large number of tr arguments in a magnet link.

An unauthenticated remote attacker can modify configurations to perform a remote code execution, gain root rights or perform an DoS due to improper input validation.

Command Injection in GitHub repository thorsten/phpmyfaq prior to 3.1.11.

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the wps_ap_ssid5g parameter