A vulnerability classified as critical was found in Contemporary Control System BASrouter BACnet BASRT-B 2.7.2. This vulnerability affects unknown code of the component Application Protocol Data Unit. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-263890 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506.
A vulnerability was found in Karjasoft Sami HTTP Server 2.0. It has been classified as problematic. Affected is an unknown function of the component HTTP HEAD Rrequest Handler. The manipulation leads to denial of service. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250836.
When a Beckhoff TwinCAT Runtime receives a malformed UDP packet, the ADS Discovery Service shuts down. Note that the TwinCAT devices are still performing as normal. This issue affects TwinCAT 2 version 2304 (and prior) and TwinCAT 3.1 version 4204.0 (and prior).
In Apache Tomcat 9.0.0.M1 to 9.0.0.M18 and 8.5.0 to 8.5.12, the handling of an HTTP/2 GOAWAY frame for a connection did not close streams associated with that connection that were currently waiting for a WINDOW_UPDATE before allowing the application to write more data. These waiting streams each consumed a thread. A malicious client could therefore construct a series of HTTP/2 requests that would consume all available processing threads.
A vulnerability has been found in Axiomatic Bento4 and classified as problematic. This vulnerability affects the function AP4_AtomFactory::CreateAtomFromStream of the component mp4edit. The manipulation leads to memory leak. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-212008.
Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have an information leakage vulnerability. An attacker can exploit this vulnerability by sending specific request packets to affected devices. Successful exploit may lead to information leakage.
In Couchbase Server 6.0.3 and Couchbase Sync Gateway through 2.7.0, the Cluster management, views, query, and full-text search endpoints are vulnerable to the Slowloris denial-of-service attack because they don't more aggressively terminate slow connections.
The deferred_image_processing (aka Deferred image processing) extension before 1.0.2 for TYPO3 allows Denial of Service via the FAL API because of /var/transient disk consumption.
The Web Sockets implementation in Google Chrome before 7.0.517.41 does not properly handle a shutdown action, which allows remote attackers to cause a denial of service (application crash) via unspecified vectors.
A vulnerability, which was classified as problematic, was found in Shemes GrabIt up to 1.7.2 Beta 4. This affects the component NZB Date Parser. The manipulation of the argument date with the input 1000000000000000 as part of a NZB File leads to a denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in AOL AIM Triton 1.0.4. It has been declared as problematic. This vulnerability affects unknown code of the component Invite Handler. The manipulation of the argument CSeq leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-256318 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.
Belledonne Belle-sip before 5.0.20 can crash applications such as Linphone via " \ " in the display name of a From header.
A vulnerability classified as problematic was found in Poly CCX 400, CCX 600, Trio 8800 and Trio C60. This vulnerability affects unknown code of the component HTTP Header Handler. The manipulation of the argument Cookie leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249256.
Packetbeat versions prior to 5.6.4 are affected by a denial of service flaw in the PostgreSQL protocol handler. If Packetbeat is listening for PostgreSQL traffic and a user is able to send arbitrary network traffic to the monitored port, the attacker could prevent Packetbeat from properly logging other PostgreSQL traffic.
A vulnerability has been found in AMPPS 2.7 and classified as problematic. Affected by this vulnerability is an unknown functionality of the component Encryption Passphrase Handler. The manipulation leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 4.0 is able to address this issue. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-252679. NOTE: The vendor explains that AMPPS 4.0 is a complete overhaul and the code was re-written.
A vulnerability was found in Gabriels FTP Server 1.2. It has been rated as problematic. This issue affects some unknown processing. The manipulation of the argument USERNAME leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-252287.
A vulnerability was found in Solar FTP Server 2.1.1/2.1.2. It has been declared as problematic. This vulnerability affects unknown code of the component PASV Command Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. VDB-252286 is the identifier assigned to this vulnerability.
A vulnerability, which was classified as problematic, has been found in EFS Easy Chat Server 3.1. Affected by this issue is some unknown functionality of the component HTTP GET Request Handler. The manipulation of the argument USERNAME leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251480. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability has been found in PCMan FTP Server 2.0.7 and classified as problematic. This vulnerability affects unknown code of the component PUT Command Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251554 is the identifier assigned to this vulnerability.
A vulnerability has been found in iSharer and upRedSun File Sharing Wizard up to 1.5.0 and classified as problematic. This vulnerability affects unknown code of the component GET Request Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-250438 is the identifier assigned to this vulnerability.
A vulnerability was found in PCMan FTP Server 2.0.7 and classified as problematic. This issue affects some unknown processing of the component STOR Command Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-251555.
A vulnerability classified as problematic was found in EFS Easy File Sharing FTP 2.0. Affected by this vulnerability is an unknown functionality. The manipulation of the argument username leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-251479. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability, which was classified as problematic, has been found in EasyFTP 1.7.0. This issue affects some unknown processing of the component LIST Command Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-250715.
A vulnerability classified as problematic has been found in SpyCamLizard 1.230. Affected is an unknown function of the component HTTP GET Request Handler. The manipulation leads to denial of service. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252036.
A vulnerability was found in Jasper httpdx up to 1.5.4 and classified as problematic. This issue affects some unknown processing of the component HTTP POST Request Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-250439.
A vulnerability classified as problematic has been found in EFS Easy File Sharing FTP 3.6. This affects an unknown part of the component Login. The manipulation of the argument password leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-251559.
A vulnerability was found in ProSSHD 1.2 on Windows. It has been declared as problematic. This vulnerability affects unknown code. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251548.
A vulnerability has been found in Sentex FTPDMIN 0.96 and classified as problematic. Affected by this vulnerability is an unknown functionality of the component RNFR Command Handler. The manipulation leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-249817 was assigned to this vulnerability.
A vulnerability classified as problematic was found in Xlightftpd Xlight FTP Server 1.1. This vulnerability affects unknown code of the component Login. The manipulation of the argument user leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251560.
A vulnerability was found in ACME Ultra Mini HTTPd 1.21. It has been classified as problematic. This affects an unknown part of the component HTTP GET Request Handler. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-249819.
Trustwave ModSecurity 3.0.0 through 3.0.3 allows an attacker to send crafted requests that may, when sent quickly in large volumes, lead to the server becoming slow or unresponsive (Denial of Service) because of a flaw in Transaction::addRequestHeader in transaction.cc.
A flaw was found in Undertow when using Remoting as shipped in Red Hat Jboss EAP before version 7.2.4. A memory leak in HttpOpenListener due to holding remote connections indefinitely may lead to denial of service. Versions before undertow 2.0.25.SP1 and jboss-remoting 5.0.14.SP1 are believed to be vulnerable.
knot-resolver before version 4.3.0 is vulnerable to denial of service through high CPU utilization. DNS replies with very many resource records might be processed very inefficiently, in extreme cases taking even several CPU seconds for each such uncached message. For example, a few thousand A records can be squashed into one DNS message (limit is 64kB).
The tokio-boring library in version 4.0.0 is affected by a memory leak issue that can lead to excessive resource consumption and potential DoS by resource exhaustion. The set_ex_data function used by the library did not deallocate memory used by pre-existing data in memory each time after completing a TLS connection causing the program to consume more resources with each new connection.
A vulnerability in the remote access VPN session manager of Cisco Adaptive Security Appliance (ASA) Software could allow a unauthenticated, remote attacker to cause a denial of service (DoS) condition on the remote access VPN services. The vulnerability is due to an issue with the remote access VPN session manager. An attacker could exploit this vulnerability by requesting an excessive number of remote access VPN sessions. An exploit could allow the attacker to cause a DoS condition.
OpenFlow Plugin and OpenDayLight Controller versions Nitrogen, Carbon, Boron, Robert Varga, Anil Vishnoi contain a flaw when multiple 'expired' flows take up the memory resource of CONFIG DATASTORE which leads to CONTROLLER shutdown. If multiple different flows with 'idle-timeout' and 'hard-timeout' are sent to the Openflow Plugin REST API, the expired flows will eventually crash the controller once its resource allocations set with the JVM size are exceeded. Although the installed flows (with timeout set) are removed from network (and thus also from controller's operations DS), the expired entries are still present in CONFIG DS. The attack can originate both from NORTH or SOUTH. The above description is for a north bound attack. A south bound attack can originate when an attacker attempts a flow flooding attack and since flows come with timeouts, the attack is not successful. However, the attacker will now be successful in CONTROLLER overflow attack (resource consumption). Although, the network (actual flow tables) and operational DS are only (~)1% occupied, the controller requests for resource consumption. This happens because the installed flows get removed from the network upon timeout.
A vulnerability was determined in Open5GS up to 2.7.5. Affected by this issue is the function smf_gsm_state_wait_pfcp_deletion of the file src/smf/gsm-sm.c of the component SMF. The manipulation leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.7.6 is able to address this issue. The patch is identified as c58b8f081986aaf2a312d73a0a17985518b47fe6. It is recommended to upgrade the affected component.
A vulnerability was determined in Open5GS up to 2.7.5. This vulnerability affects the function smf_state_operational of the file src/smf/smf-sm.c of the component SMF. The manipulation of the argument stream leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version v2.7.6 is able to address this issue. The patch is identified as f168f7586a4fa536cee95ae60ac437d997f15b97. It is recommended to upgrade the affected component.
A vulnerability was identified in Open5GS up to 2.7.5. Affected by this vulnerability is the function amf_npcf_am_policy_control_build_create/amf_nsmf_pdusession_build_create_sm_context of the file src/amf/npcf-build.c of the component AMF. The manipulation leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.7.6 is able to address this issue. The patch is named cf63dd63197bf61a4b041aa364ba6a6199ab15e4. It is recommended to upgrade the affected component.
A vulnerability was found in Open5GS up to 2.7.5. This affects the function gmm_state_exception of the file src/amf/gmm-sm.c of the component AMF. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.7.6 is able to address this issue. The identifier of the patch is f47f2bd4f7274295c5fbb19e2f806753d183d09a. It is recommended to upgrade the affected component.
A vulnerability has been found in Open5GS up to 2.7.5. Affected by this issue is the function esm_handle_pdn_connectivity_request of the file src/mme/esm-handler.c of the component AMF Component. The manipulation leads to denial of service. The attack may be launched remotely. Upgrading to version 2.7.6 is able to address this issue. The name of the patch is 701505102f514cbde2856cd2ebc9bedb7efc820d. It is recommended to upgrade the affected component.
A vulnerability has been found in Ability FTP Server 2.34 and classified as problematic. Affected by this vulnerability is an unknown functionality of the component APPE Command Handler. The manipulation leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-250717 was assigned to this vulnerability.
A vulnerability has been found in Open5GS up to 2.7.5. Affected is the function gmm_state_de_registered/gmm_state_exception of the file src/amf/gmm-sm.c of the component AMF. The manipulation leads to denial of service. It is possible to launch the attack remotely. Upgrading to version 2.7.6 is able to address this issue. The name of the patch is 1f30edac27f69f61cff50162e980fe58fdeb30ca. It is recommended to upgrade the affected component.
A vulnerability was found in GPAC up to 2.4. It has been rated as problematic. Affected by this issue is the function gf_dash_download_init_segment of the file src/media_tools/dash_client.c. The manipulation of the argument base_init_url leads to null pointer dereference. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The patch is identified as 153ea314b6b053db17164f8bc3c7e1e460938eaa. It is recommended to apply a patch to fix this issue.
Receipt of a specific packet on the out-of-band management interface fxp0 may cause the system to crash and restart (vmcore). By continuously sending a specially crafted packet to the fxp0 interface, an attacker can repetitively crash the rpd process causing prolonged Denial of Service (DoS). Affected releases are Juniper Networks SRX5000 Series: 12.1X46 versions prior to 12.1X46-D82; 12.3X48 versions prior to 12.3X48-D80; 15.1X49 versions prior to 15.1X49-D160.
A vulnerability was found in Artifex GhostPDL up to 3989415a5b8e99b9d1b87cc9902bde9b7cdea145. It has been classified as problematic. This affects the function pdf_ferror of the file devices/vector/gdevpdf.c of the component New Output File Open Error Handler. The manipulation leads to null pointer dereference. It is possible to initiate the attack remotely. The identifier of the patch is 619a106ba4c4abed95110f84d5efcd7aee38c7cb. It is recommended to apply a patch to fix this issue.
In MPLS environments, receipt of a specific SNMP packet may cause the routing protocol daemon (RPD) process to crash and restart. By continuously sending a specially crafted SNMP packet, an attacker can repetitively crash the RPD process causing prolonged denial of service. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS : 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D48 on EX/QFX series; 15.1 versions prior to 15.1R4-S9, 15.1R7-S2; 15.1F6 versions prior to 15.1F6-S11; 15.1X49 versions prior to 15.1X49-D141, 15.1X49-D144, 15.1X49-D150 on SRX Series; 15.1X53 versions prior to 15.1X53-D234 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 15.1X53 versions prior to 15.1X53-D590 on EX2300/EX3400 Series; 15.1X54 on ACX Series; 16.1 versions prior to 16.1R3-S10, 16.1R4-S11, 16.1R6-S5, 16.1R7; 16.1X65 versions prior to 16.1X65-D48; 16.2 versions prior to 16.2R2-S6; 17.1 versions prior to 17.1R2-S8, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D92, 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R3; 17.4 versions prior to 17.4R1-S4, 17.4R2; 18.1 versions prior to 18.1R1-S1, 18.1R2-S1, 18.1R3; 18.2X75 versions prior to 18.2X75-D10.
When BGP tracing is enabled an incoming BGP message may cause the Junos OS routing protocol daemon (rpd) process to crash and restart. While rpd restarts after a crash, repeated crashes can result in an extended DoS condition. Affected releases are Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S4, 16.1R7-S5; 16.2 versions prior to 16.2R2-S9, 16.2R3; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3-S1; 17.3 versions prior to 17.3R3-S3, 17.3R3-S4, 17.3R4; 17.4 versions prior to 17.4R1-S7, 17.4R2-S3, 17.4R2-S4, 17.4R3; 18.1 versions prior to 18.1R2-S4, 18.1R3-S4, 18.1R4; 18.2 versions prior to 18.2R2-S2, 18.2R2-S3, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S3, 18.3R2; 18.4 versions prior to 18.4R1-S2, 18.4R2. This issue does not affect Junos releases prior to 16.1R1.
On Junos devices with the BGP graceful restart helper mode enabled or the BGP graceful restart mechanism enabled, a BGP session restart on a remote peer that has the graceful restart mechanism enabled may cause the local routing protocol daemon (RPD) process to crash and restart. By simulating a specific BGP session restart, an attacker can repeatedly crash the RPD process causing prolonged denial of service (DoS). Graceful restart helper mode for BGP is enabled by default. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS: 16.1 versions prior to 16.1R7; 16.1X65 versions prior to 16.1X65-D48; 16.2 versions prior to 16.2R2-S8; 17.1 versions prior to 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D92, 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S4, 17.4R2; 18.1 versions prior to 18.1R2. Junos OS releases prior to 16.1R1 are not affected.