In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Check the DVFS OPP count returned by the firmware Fix a kernel crash with the below call trace when the SCPI firmware returns OPP count of zero. dvfs_info.opp_count may be zero on some platforms during the reboot test, and the kernel will crash after dereferencing the pointer to kcalloc(info->count, sizeof(*opp), GFP_KERNEL). | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 | Mem abort info: | ESR = 0x96000004 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c | [0000000000000028] pgd=0000000000000000 | Internal error: Oops: 96000004 [#1] SMP | scpi-hwmon: probe of PHYT000D:00 failed with error -110 | Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c) | CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1 | Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | lr : clk_register+0x438/0x720 | Call trace: | scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | devm_clk_hw_register+0x50/0xa0 | scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi] | scpi_clocks_probe+0x528/0x70c [clk_scpi] | platform_drv_probe+0x58/0xa8 | really_probe+0x260/0x3d0 | driver_probe_device+0x12c/0x148 | device_driver_attach+0x74/0x98 | __driver_attach+0xb4/0xe8 | bus_for_each_dev+0x88/0xe0 | driver_attach+0x30/0x40 | bus_add_driver+0x178/0x2b0 | driver_register+0x64/0x118 | __platform_driver_register+0x54/0x60 | scpi_clocks_driver_init+0x24/0x1000 [clk_scpi] | do_one_initcall+0x54/0x220 | do_init_module+0x54/0x1c8 | load_module+0x14a4/0x1668 | __se_sys_finit_module+0xf8/0x110 | __arm64_sys_finit_module+0x24/0x30 | el0_svc_common+0x78/0x170 | el0_svc_handler+0x38/0x78 | el0_svc+0x8/0x340 | Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820) | ---[ end trace 06feb22469d89fa8 ]--- | Kernel panic - not syncing: Fatal exception | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x10,a0002008 | Memory Limit: none

Memory corruption during buffer allocation due to dereferencing session ctx pointer without checking if pointer is valid in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Mobile

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT When loading a EXT program without specifying `attr->attach_prog_fd`, the `prog->aux->dst_prog` will be null. At this time, calling resolve_prog_type() anywhere will result in a null pointer dereference. Example stack trace: [ 8.107863] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 8.108262] Mem abort info: [ 8.108384] ESR = 0x0000000096000004 [ 8.108547] EC = 0x25: DABT (current EL), IL = 32 bits [ 8.108722] SET = 0, FnV = 0 [ 8.108827] EA = 0, S1PTW = 0 [ 8.108939] FSC = 0x04: level 0 translation fault [ 8.109102] Data abort info: [ 8.109203] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 8.109399] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 8.109614] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 8.109836] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101354000 [ 8.110011] [0000000000000004] pgd=0000000000000000, p4d=0000000000000000 [ 8.112624] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 8.112783] Modules linked in: [ 8.113120] CPU: 0 PID: 99 Comm: may_access_dire Not tainted 6.10.0-rc3-next-20240613-dirty #1 [ 8.113230] Hardware name: linux,dummy-virt (DT) [ 8.113390] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.113429] pc : may_access_direct_pkt_data+0x24/0xa0 [ 8.113746] lr : add_subprog_and_kfunc+0x634/0x8e8 [ 8.113798] sp : ffff80008283b9f0 [ 8.113813] x29: ffff80008283b9f0 x28: ffff800082795048 x27: 0000000000000001 [ 8.113881] x26: ffff0000c0bb2600 x25: 0000000000000000 x24: 0000000000000000 [ 8.113897] x23: ffff0000c1134000 x22: 000000000001864f x21: ffff0000c1138000 [ 8.113912] x20: 0000000000000001 x19: ffff0000c12b8000 x18: ffffffffffffffff [ 8.113929] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 8.113944] x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 [ 8.113958] x11: 0720072007200720 x10: 0000000000f9fca4 x9 : ffff80008021f4e4 [ 8.113991] x8 : 0101010101010101 x7 : 746f72705f6d656d x6 : 000000001e0e0f5f [ 8.114006] x5 : 000000000001864f x4 : ffff0000c12b8000 x3 : 000000000000001c [ 8.114020] x2 : 0000000000000002 x1 : 0000000000000000 x0 : 0000000000000000 [ 8.114126] Call trace: [ 8.114159] may_access_direct_pkt_data+0x24/0xa0 [ 8.114202] bpf_check+0x3bc/0x28c0 [ 8.114214] bpf_prog_load+0x658/0xa58 [ 8.114227] __sys_bpf+0xc50/0x2250 [ 8.114240] __arm64_sys_bpf+0x28/0x40 [ 8.114254] invoke_syscall.constprop.0+0x54/0xf0 [ 8.114273] do_el0_svc+0x4c/0xd8 [ 8.114289] el0_svc+0x3c/0x140 [ 8.114305] el0t_64_sync_handler+0x134/0x150 [ 8.114331] el0t_64_sync+0x168/0x170 [ 8.114477] Code: 7100707f 54000081 f9401c00 f9403800 (b9400403) [ 8.118672] ---[ end trace 0000000000000000 ]--- One way to fix it is by forcing `attach_prog_fd` non-empty when bpf_prog_load(). But this will lead to `libbpf_probe_bpf_prog_type` API broken which use verifier log to probe prog type and will log nothing if we reject invalid EXT prog before bpf_check(). Another way is by adding null check in resolve_prog_type(). The issue was introduced by commit 4a9c7bbe2ed4 ("bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT") which wanted to correct type resolution for BPF_PROG_TYPE_TRACING programs. Before that, the type resolution of BPF_PROG_TYPE_EXT prog actually follows the logic below: prog->aux->dst_prog ? prog->aux->dst_prog->type : prog->type; It implies that when EXT program is not yet attached to `dst_prog`, the prog type should be EXT itself. This code worked fine in the past. So just keep using it. Fix this by returning `prog->type` for BPF_PROG_TYPE_EXT if `dst_prog` is not present in resolve_prog_type().

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Revise lpfc_prep_embed_io routine with proper endian macro usages On big endian architectures, it is possible to run into a memory out of bounds pointer dereference when FCP targets are zoned. In lpfc_prep_embed_io, the memcpy(ptr, fcp_cmnd, sgl->sge_len) is referencing a little endian formatted sgl->sge_len value. So, the memcpy can cause big endian systems to crash. Redefine the *sgl ptr as a struct sli4_sge_le to make it clear that we are referring to a little endian formatted data structure. And, update the routine with proper le32_to_cpu macro usages.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: ma35d1: Add a NULL check for of_node The pdev->dev.of_node can be NULL if the "serial" node is absent. Add a NULL check to return an error in such cases.

In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common In order to set the rate range of a hw sunxi_ccu_probe calls hw_to_ccu_common() assuming all entries in desc->ccu_clks are contained in a ccu_common struct. This assumption is incorrect and, in consequence, causes invalid pointer de-references. Remove the faulty call. Instead, add one more loop that iterates over the ccu_clks and sets the rate range, if required.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/xe_devcoredump: Check NULL before assignments Assign 'xe_devcoredump_snapshot *' and 'xe_device *' only if 'coredump' is not NULL. v2 - Fix commit messages. v3 - Define variables before code.(Ashutosh/Jose) v4 - Drop return check for coredump_to_xe. (Jose/Rodrigo) v5 - Modify misleading commit message. (Matt)

In the Linux kernel, the following vulnerability has been resolved: btrfs: make cow_file_range_inline() honor locked_page on error The btrfs buffered write path runs through __extent_writepage() which has some tricky return value handling for writepage_delalloc(). Specifically, when that returns 1, we exit, but for other return values we continue and end up calling btrfs_folio_end_all_writers(). If the folio has been unlocked (note that we check the PageLocked bit at the start of __extent_writepage()), this results in an assert panic like this one from syzbot: BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction. BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:871! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted 6.10.0-syzkaller-05505-gb1bc554e009e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871 Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d 0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8 6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89 RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246 RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001 R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __extent_writepage fs/btrfs/extent_io.c:1597 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline] btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373 do_writepages+0x359/0x870 mm/page-writeback.c:2656 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] __filemap_fdatawrite mm/filemap.c:436 [inline] filemap_flush+0xdf/0x130 mm/filemap.c:463 btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:222 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:877 do_group_exit+0x207/0x2c0 kernel/exit.c:1026 __do_sys_exit_group kernel/exit.c:1037 [inline] __se_sys_exit_group kernel/exit.c:1035 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5f075b70c9 Code: Unable to access opcode bytes at 0x7f5f075b709f. I was hitting the same issue by doing hundreds of accelerated runs of generic/475, which also hits IO errors by design. I instrumented that reproducer with bpftrace and found that the undesirable folio_unlock was coming from the following callstack: folio_unlock+5 __process_pages_contig+475 cow_file_range_inline.constprop.0+230 cow_file_range+803 btrfs_run_delalloc_range+566 writepage_delalloc+332 __extent_writepage # inlined in my stacktrace, but I added it here extent_write_cache_pages+622 Looking at the bisected-to pa ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tpm: Use auth only after NULL check in tpm_buf_check_hmac_response() Dereference auth after NULL check in tpm_buf_check_hmac_response(). Otherwise, unless tpm2_sessions_init() was called, a call can cause NULL dereference, when TCG_TPM2_HMAC is enabled. [jarkko: adjusted the commit message.]

In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path Dan Carpenter reported a Smack static checker warning: fs/smb/client/cifsfs.c:1981 init_cifs() error: we previously assumed 'serverclose_wq' could be null (see line 1895) The patch which introduced the serverclose workqueue used the wrong oredering in error paths in init_cifs() for freeing it on errors.

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix possible double free in error handling path When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function adev_release calls kfree(madev). We shouldn't call kfree(madev) again in the error handling path. Set 'madev' to NULL.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: validate nvme_local_port correctly The driver load failed with error message, qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef and with a kernel crash, BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 Workqueue: events_unbound qla_register_fcport_fn [qla2xxx] RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc] RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000 RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000 RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030 R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4 R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8 FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0 Call Trace: qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx] ? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx] qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx] qla_register_fcport_fn+0x54/0xc0 [qla2xxx] Exit the qla_nvme_register_remote() function when qla_nvme_register_hba() fails and correctly validate nvme_local_port.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix netif state handling mlx5e_suspend cleans resources only if netif_device_present() returns true. However, mlx5e_resume changes the state of netif, via mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED. In the below case, the above leads to NULL-ptr Oops[1] and memory leaks: mlx5e_probe _mlx5e_resume mlx5e_attach_netdev mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach() register_netdev <-- failed for some reason. ERROR_FLOW: _mlx5e_suspend <-- netif_device_present return false, resources aren't freed :( Hence, clean resources in this case as well. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at0xffffffffffffffd6. RSP: 0018:ffff888178aaf758 EFLAGS: 00010246 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core] mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib] mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib] __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe1/0x210 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x637/0x840 __auxiliary_device_add+0x3b/0xa0 add_adev+0xc9/0x140 [mlx5_core] mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core] mlx5_register_device+0x53/0xa0 [mlx5_core] mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x44c/0x730 [mlx5_core] local_pci_probe+0x3e/0x90 pci_device_probe+0xbf/0x210 ? kernfs_create_link+0x5d/0xa0 ? sysfs_do_create_link_sd+0x60/0xc0 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 pci_bus_add_device+0x54/0x80 pci_iov_add_virtfn+0x2e6/0x320 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 kernfs_fop_write_iter+0x10c/0x1a0 vfs_write+0x291/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 CR2: 0000000000000000 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL pointer check for kzalloc [Why & How] Check return pointer of kzalloc before using it.

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: fsl_qmc_audio: Check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value.

The __sys_sendmsg function in net/socket.c in the Linux kernel before 3.1 allows local users to cause a denial of service (system crash) via crafted use of the sendmmsg system call, leading to an incorrect pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/gma500: fix null pointer dereference in psb_intel_lvds_get_modes In psb_intel_lvds_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: fs: don't misleadingly warn during thaw operations The block device may have been frozen before it was claimed by a filesystem. Concurrently another process might try to mount that frozen block device and has temporarily claimed the block device for that purpose causing a concurrent fs_bdev_thaw() to end up here. The mounter is already about to abort mounting because they still saw an elevanted bdev->bd_fsfreeze_count so get_bdev_super() will return NULL in that case. For example, P1 calls dm_suspend() which calls into bdev_freeze() before the block device has been claimed by the filesystem. This brings bdev->bd_fsfreeze_count to 1 and no call into fs_bdev_freeze() is required. Now P2 tries to mount that frozen block device. It claims it and checks bdev->bd_fsfreeze_count. As it's elevated it aborts mounting. In the meantime P3 called dm_resume(). P3 sees that the block device is already claimed by a filesystem and calls into fs_bdev_thaw(). P3 takes a passive reference and realizes that the filesystem isn't ready yet. P3 puts itself to sleep to wait for the filesystem to become ready. P2 now puts the last active reference to the filesystem and marks it as dying. P3 gets woken, sees that the filesystem is dying and get_bdev_super() fails.

In the Linux kernel, the following vulnerability has been resolved: virtio-pci: Check if is_avq is NULL [bug] In the virtio_pci_common.c function vp_del_vqs, vp_dev->is_avq is involved to determine whether it is admin virtqueue, but this function vp_dev->is_avq may be empty. For installations, virtio_pci_legacy does not assign a value to vp_dev->is_avq. [fix] Check whether it is vp_dev->is_avq before use. [test] Test with virsh Attach device Before this patch, the following command would crash the guest system After applying the patch, everything seems to be working fine.

crypto/ghash-generic.c in the Linux kernel before 3.1 allows local users to cause a denial of service (NULL pointer dereference and OOPS) or possibly have unspecified other impact by triggering a failed or missing ghash_setkey function call, followed by a (1) ghash_update function call or (2) ghash_final function call, as demonstrated by a write operation on an AF_ALG socket.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer Fix invalid dereferencing of indirect CCW data pointer in dasd_eckd_dump_sense() that leads to a kernel panic in error cases. When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer does not contain the data address itself but a pointer to the IDAL. This needs to be translated from physical to virtual as well before using it. This dereferencing is also used for dasd_page_cache and also fixed although it is very unlikely that this code path ever gets used.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Check socket flag instead of hcon This fixes the following Smatch static checker warning: net/bluetooth/iso.c:1364 iso_sock_recvmsg() error: we previously assumed 'pi->conn->hcon' could be null (line 1359) net/bluetooth/iso.c 1347 static int iso_sock_recvmsg(struct socket *sock, struct msghdr *msg, 1348 size_t len, int flags) 1349 { 1350 struct sock *sk = sock->sk; 1351 struct iso_pinfo *pi = iso_pi(sk); 1352 1353 BT_DBG("sk %p", sk); 1354 1355 if (test_and_clear_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) { 1356 lock_sock(sk); 1357 switch (sk->sk_state) { 1358 case BT_CONNECT2: 1359 if (pi->conn->hcon && ^^^^^^^^^^^^^^ If ->hcon is NULL 1360 test_bit(HCI_CONN_PA_SYNC, &pi->conn->hcon->flags)) { 1361 iso_conn_big_sync(sk); 1362 sk->sk_state = BT_LISTEN; 1363 } else { --> 1364 iso_conn_defer_accept(pi->conn->hcon); ^^^^^^^^^^^^^^ then we're toast 1365 sk->sk_state = BT_CONFIG; 1366 } 1367 release_sock(sk); 1368 return 0; 1369 case BT_CONNECTED: 1370 if (test_bit(BT_SK_PA_SYNC,

In the Linux kernel, the following vulnerability has been resolved: net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling Move the freeing of the dummy net_device from mtk_free_dev() to mtk_remove(). Previously, if alloc_netdev_dummy() failed in mtk_probe(), eth->dummy_dev would be NULL. The error path would then call mtk_free_dev(), which in turn called free_netdev() assuming dummy_dev was allocated (but it was not), potentially causing a NULL pointer dereference. By moving free_netdev() to mtk_remove(), we ensure it's only called when mtk_probe() has succeeded and dummy_dev is fully allocated. This addresses a potential NULL pointer dereference detected by Smatch[1].

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add NULL pointer check to crst_table_free() base_crst_free() crst_table_free() used to work with NULL pointers before the conversion to ptdescs. Since crst_table_free() can be called with a NULL pointer (error handling in crst_table_upgrade() add an explicit check. Also add the same check to base_crst_free() for consistency reasons. In real life this should not happen, since order two GFP_KERNEL allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data Verify that lvts_data is not NULL before using it.

In the Linux kernel, the following vulnerability has been resolved: media: imx-pxp: Fix ERR_PTR dereference in pxp_probe() devm_regmap_init_mmio() can fail, add a check and bail out in case of error.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes In nouveau_connector_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

The m_stop function in fs/proc/task_mmu.c in the Linux kernel before 2.6.39 allows local users to cause a denial of service (OOPS) via vectors that trigger an m_start error.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix error pbuf checking Syz reports a problem, which boils down to NULL vs IS_ERR inconsistent error handling in io_alloc_pbuf_ring(). KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__io_remove_buffers+0xac/0x700 io_uring/kbuf.c:341 Call Trace: <TASK> io_put_bl io_uring/kbuf.c:378 [inline] io_destroy_buffers+0x14e/0x490 io_uring/kbuf.c:392 io_ring_ctx_free+0xa00/0x1070 io_uring/io_uring.c:2613 io_ring_exit_work+0x80f/0x8a0 io_uring/io_uring.c:2844 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

When the webdriver for the Browser object downloads data from a HTTP server, the data pointer is set to NULL and is allocated only in curl_write_cb when receiving data. If the server's response is an empty document, then wd->data in the code below will remain NULL and an attempt to read from it will result in a crash.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fw: scan offload prohibit all 6 GHz channel if no 6 GHz sband We have some policy via BIOS to block uses of 6 GHz. In this case, 6 GHz sband will be NULL even if it is WiFi 7 chip. So, add NULL handling here to avoid crash.

In the Linux kernel, the following vulnerability has been resolved: netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id], but the function is exposed to user space before the entry is allocated via register_pernet_subsys(). Let's call register_pernet_subsys() before xt_register_template().

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix NULL pointer dereference in gfs2_log_flush In gfs2_jindex_free(), set sdp->sd_jdesc to NULL under the log flush lock to provide exclusion against gfs2_log_flush(). In gfs2_log_flush(), check if sdp->sd_jdesc is non-NULL before dereferencing it. Otherwise, we could run into a NULL pointer dereference when outstanding glock work races with an unmount (glock_work_func -> run_queue -> do_xmote -> inode_go_sync -> gfs2_log_flush).

In the Linux kernel, the following vulnerability has been resolved: null_blk: fix validation of block size Block size should be between 512 and PAGE_SIZE and be a power of 2. The current check does not validate this, so update the check. Without this patch, null_blk would Oops due to a null pointer deref when loaded with bs=1536 [1]. [axboe: remove unnecessary braces and != 0 check]

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix ufshcd_clear_cmd racing issue When ufshcd_clear_cmd is racing with the completion ISR, the completed tag of the request's mq_hctx pointer will be set to NULL by the ISR. And ufshcd_clear_cmd's call to ufshcd_mcq_req_to_hwq will get NULL pointer KE. Return success when the request is completed by ISR because sq does not need cleanup. The racing flow is: Thread A ufshcd_err_handler step 1 ufshcd_try_to_abort_task ufshcd_cmd_inflight(true) step 3 ufshcd_clear_cmd ... ufshcd_mcq_req_to_hwq blk_mq_unique_tag rq->mq_hctx->queue_num step 5 Thread B ufs_mtk_mcq_intr(cq complete ISR) step 2 scsi_done ... __blk_mq_free_request rq->mq_hctx = NULL; step 4 Below is KE back trace: ufshcd_try_to_abort_task: cmd pending in the device. tag = 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194 pc : [0xffffffd589679bf8] blk_mq_unique_tag+0x8/0x14 lr : [0xffffffd5862f95b4] ufshcd_mcq_sq_cleanup+0x6c/0x1cc [ufs_mediatek_mod_ise] Workqueue: ufs_eh_wq_0 ufshcd_err_handler [ufs_mediatek_mod_ise] Call trace: dump_backtrace+0xf8/0x148 show_stack+0x18/0x24 dump_stack_lvl+0x60/0x7c dump_stack+0x18/0x3c mrdump_common_die+0x24c/0x398 [mrdump] ipanic_die+0x20/0x34 [mrdump] notify_die+0x80/0xd8 die+0x94/0x2b8 __do_kernel_fault+0x264/0x298 do_page_fault+0xa4/0x4b8 do_translation_fault+0x38/0x54 do_mem_abort+0x58/0x118 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x54/0x90 el1h_64_sync+0x68/0x6c blk_mq_unique_tag+0x8/0x14 ufshcd_clear_cmd+0x34/0x118 [ufs_mediatek_mod_ise] ufshcd_try_to_abort_task+0x2c8/0x5b4 [ufs_mediatek_mod_ise] ufshcd_err_handler+0xa7c/0xfa8 [ufs_mediatek_mod_ise] process_one_work+0x208/0x4fc worker_thread+0x228/0x438 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: allocate dummy checksums for zoned NODATASUM writes Shin'ichiro reported that when he's running fstests' test-case btrfs/167 on emulated zoned devices, he's seeing the following NULL pointer dereference in 'btrfs_zone_finish_endio()': Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] RSP: 0018:ffff88867f107a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff893e5534 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed1081696028 R10: ffff88840b4b0143 R11: ffff88834dfff600 R12: ffff88840b4b0000 R13: 0000000000020000 R14: 0000000000000000 R15: ffff888530ad5210 FS: 0000000000000000(0000) GS:ffff888e3f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f87223fff38 CR3: 00000007a7c6a002 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die_addr+0x46/0x70 ? exc_general_protection+0x14f/0x250 ? asm_exc_general_protection+0x26/0x30 ? do_raw_read_unlock+0x44/0x70 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] btrfs_finish_one_ordered+0x5d9/0x19a0 [btrfs] ? __pfx_lock_release+0x10/0x10 ? do_raw_write_lock+0x90/0x260 ? __pfx_do_raw_write_lock+0x10/0x10 ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? _raw_write_unlock+0x23/0x40 ? btrfs_finish_ordered_zoned+0x5a9/0x850 [btrfs] ? lock_acquire+0x435/0x500 btrfs_work_helper+0x1b1/0xa70 [btrfs] ? __schedule+0x10a8/0x60b0 ? __pfx___might_resched+0x10/0x10 process_one_work+0x862/0x1410 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0x1010 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? trace_irq_enable.constprop.0+0xce/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Enabling CONFIG_BTRFS_ASSERT revealed the following assertion to trigger: assertion failed: !list_empty(&ordered->list), in fs/btrfs/zoned.c:1815 This indicates, that we're missing the checksums list on the ordered_extent. As btrfs/167 is doing a NOCOW write this is to be expected. Further analysis with drgn confirmed the assumption: >>> inode = prog.crashed_thread().stack_trace()[11]['ordered'].inode >>> btrfs_inode = drgn.container_of(inode, "struct btrfs_inode", \ "vfs_inode") >>> print(btrfs_inode.flags) (u32)1 As zoned emulation mode simulates conventional zones on regular devices, we cannot use zone-append for writing. But we're only attaching dummy checksums if we're doing a zone-append write. So for NOCOW zoned data writes on conventional zones, also attach a dummy checksum.

A null pointer dereference vulnerability was found in dpll_pin_parent_pin_set() in drivers/dpll/dpll_netlink.c in the Digital Phase Locked Loop (DPLL) subsystem in the Linux kernel. This issue could be exploited to trigger a denial of service.

Null pointer dereference in the FPGA kernel driver for Intel(R) Quartus(R) Prime Pro Edition before version 19.3 may allow an authenticated user to potentially enable denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: discard write access to the directory open may_open() does not allow a directory to be opened with the write access. However, some writing flags set by client result in adding write access on server, making ksmbd incompatible with FUSE file system. Simply, let's discard the write access when opening a directory. list_add corruption. next is NULL. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:26! pc : __list_add_valid+0x88/0xbc lr : __list_add_valid+0x88/0xbc Call trace: __list_add_valid+0x88/0xbc fuse_finish_open+0x11c/0x170 fuse_open_common+0x284/0x5e8 fuse_dir_open+0x14/0x24 do_dentry_open+0x2a4/0x4e0 dentry_open+0x50/0x80 smb2_open+0xbe4/0x15a4 handle_ksmbd_work+0x478/0x5ec process_one_work+0x1b4/0x448 worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: fix null deref on system suspend entry When system enters suspend with an active stream, SOF core calls hw_params_upon_resume(). On Intel platforms with HDA DMA used to manage the link DMA, this leads to call chain of hda_dsp_set_hw_params_upon_resume() -> hda_dsp_dais_suspend() -> hda_dai_suspend() -> hda_ipc4_post_trigger() A bug is hit in hda_dai_suspend() as hda_link_dma_cleanup() is run first, which clears hext_stream->link_substream, and then hda_ipc4_post_trigger() is called with a NULL snd_pcm_substream pointer.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Avoid null pointer dereference in region lookup cxl_dpa_to_region() looks up a region based on a memdev and DPA. It wrongly assumes an endpoint found mapping the DPA is also of a fully assembled region. When not true it leads to a null pointer dereference looking up the region name. This appears during testing of region lookup after a failure to assemble a BIOS defined region or if the lookup raced with the assembly of the BIOS defined region. Failure to clean up BIOS defined regions that fail assembly is an issue in itself and a fix to that problem will alleviate some of the impact. It will not alleviate the race condition so let's harden this path. The behavior change is that the kernel oops due to a null pointer dereference is replaced with a dev_dbg() message noting that an endpoint was mapped. Additional comments are added so that future users of this function can more clearly understand what it provides.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger() bdev->bd_super has been removed and commit 8887b94d9322 change the usage from bdev->bd_super to b_assoc_map->host->i_sb. Since ocfs2 hasn't set bh->b_assoc_map, it will trigger NULL pointer dereference when calling into ocfs2_abort_trigger(). Actually this was pointed out in history, see commit 74e364ad1b13. But I've made a mistake when reviewing commit 8887b94d9322 and then re-introduce this regression. Since we cannot revive bdev in buffer head, so fix this issue by initializing all types of ocfs2 triggers when fill super, and then get the specific ocfs2 trigger from ocfs2_caching_info when access journal. [joseph.qi@linux.alibaba.com: v2]

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check bo_va->bo is non-NULL before using it The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it.

A null pointer dereference vulnerability was found in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev() in drivers/net/wireless/ath/ath10k/wmi-tlv.c in the Linux kernel. This issue could be exploited to trigger a denial of service.

NVIDIA vGPU software for Linux contains a vulnerability where the software can dereference a NULL pointer. A successful exploit of this vulnerability might lead to denial of service and undefined behavior in the vGPU plugin.

In the Linux kernel, the following vulnerability has been resolved: ima: Avoid blocking in RCU read-side critical section A panic happens in ima_match_policy: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 42f873067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 5 PID: 1286325 Comm: kubeletmonit.sh Kdump: loaded Tainted: P Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ima_match_policy+0x84/0x450 Code: 49 89 fc 41 89 cf 31 ed 89 44 24 14 eb 1c 44 39 7b 18 74 26 41 83 ff 05 74 20 48 8b 1b 48 3b 1d f2 b9 f4 00 0f 84 9c 01 00 00 <44> 85 73 10 74 ea 44 8b 6b 14 41 f6 c5 01 75 d4 41 f6 c5 02 74 0f RSP: 0018:ff71570009e07a80 EFLAGS: 00010207 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000200 RDX: ffffffffad8dc7c0 RSI: 0000000024924925 RDI: ff3e27850dea2000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffabfce739 R10: ff3e27810cc42400 R11: 0000000000000000 R12: ff3e2781825ef970 R13: 00000000ff3e2785 R14: 000000000000000c R15: 0000000000000001 FS: 00007f5195b51740(0000) GS:ff3e278b12d40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000626d24002 CR4: 0000000000361ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ima_get_action+0x22/0x30 process_measurement+0xb0/0x830 ? page_add_file_rmap+0x15/0x170 ? alloc_set_pte+0x269/0x4c0 ? prep_new_page+0x81/0x140 ? simple_xattr_get+0x75/0xa0 ? selinux_file_open+0x9d/0xf0 ima_file_check+0x64/0x90 path_openat+0x571/0x1720 do_filp_open+0x9b/0x110 ? page_counter_try_charge+0x57/0xc0 ? files_cgroup_alloc_fd+0x38/0x60 ? __alloc_fd+0xd4/0x250 ? do_sys_open+0x1bd/0x250 do_sys_open+0x1bd/0x250 do_syscall_64+0x5d/0x1d0 entry_SYSCALL_64_after_hwframe+0x65/0xca Commit c7423dbdbc9e ("ima: Handle -ESTALE returned by ima_filter_rule_match()") introduced call to ima_lsm_copy_rule within a RCU read-side critical section which contains kmalloc with GFP_KERNEL. This implies a possible sleep and violates limitations of RCU read-side critical sections on non-PREEMPT systems. Sleeping within RCU read-side critical section might cause synchronize_rcu() returning early and break RCU protection, allowing a UAF to happen. The root cause of this issue could be described as follows: | Thread A | Thread B | | |ima_match_policy | | | rcu_read_lock | |ima_lsm_update_rule | | | synchronize_rcu | | | | kmalloc(GFP_KERNEL)| | | sleep | ==> synchronize_rcu returns early | kfree(entry) | | | | entry = entry->next| ==> UAF happens and entry now becomes NULL (or could be anything). | | entry->action | ==> Accessing entry might cause panic. To fix this issue, we are converting all kmalloc that is called within RCU read-side critical section to use GFP_ATOMIC. [PM: fixed missing comment, long lines, !CONFIG_IMA_LSM_RULES case]

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint Patch series "nilfs2: fix null-ptr-deref bugs on block tracepoints". This series fixes null pointer dereference bugs that occur when using nilfs2 and two block-related tracepoints. This patch (of 2): It has been reported that when using "block:block_touch_buffer" tracepoint, touch_buffer() called from __nilfs_get_folio_block() causes a NULL pointer dereference, or a general protection fault when KASAN is enabled. This happens because since the tracepoint was added in touch_buffer(), it references the dev_t member bh->b_bdev->bd_dev regardless of whether the buffer head has a pointer to a block_device structure. In the current implementation, the block_device structure is set after the function returns to the caller. Here, touch_buffer() is used to mark the folio/page that owns the buffer head as accessed, but the common search helper for folio/page used by the caller function was optimized to mark the folio/page as accessed when it was reimplemented a long time ago, eliminating the need to call touch_buffer() here in the first place. So this solves the issue by eliminating the touch_buffer() call itself.

In the Linux kernel, the following vulnerability has been resolved: iommu: Return right value in iommu_sva_bind_device() iommu_sva_bind_device() should return either a sva bond handle or an ERR_PTR value in error cases. Existing drivers (idxd and uacce) only check the return value with IS_ERR(). This could potentially lead to a kernel NULL pointer dereference issue if the function returns NULL instead of an error pointer. In reality, this doesn't cause any problems because iommu_sva_bind_device() only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA. In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will return an error, and the device drivers won't call iommu_sva_bind_device() at all.

In the Linux kernel, the following vulnerability has been resolved: skmsg: Skip zero length skb in sk_msg_recvmsg When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Lock wiphy in cfg80211_get_station Wiphy should be locked before calling rdev_get_station() (see lockdep assert in ieee80211_get_station()). This fixes the following kernel NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000003001000 [0000000000000050] pgd=0800000002dca003, p4d=0800000002dca003, pud=08000000028e9003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: netconsole dwc3_meson_g12a dwc3_of_simple dwc3 ip_gre gre ath10k_pci ath10k_core ath9k ath9k_common ath9k_hw ath CPU: 0 PID: 1091 Comm: kworker/u8:0 Not tainted 6.4.0-02144-g565f9a3a7911-dirty #705 Hardware name: RPT (r1) (DT) Workqueue: bat_events batadv_v_elp_throughput_metric_update pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath10k_sta_statistics+0x10/0x2dc [ath10k_core] lr : sta_set_sinfo+0xcc/0xbd4 sp : ffff000007b43ad0 x29: ffff000007b43ad0 x28: ffff0000071fa900 x27: ffff00000294ca98 x26: ffff000006830880 x25: ffff000006830880 x24: ffff00000294c000 x23: 0000000000000001 x22: ffff000007b43c90 x21: ffff800008898acc x20: ffff00000294c6e8 x19: ffff000007b43c90 x18: 0000000000000000 x17: 445946354d552d78 x16: 62661f7200000000 x15: 57464f445946354d x14: 0000000000000000 x13: 00000000000000e3 x12: d5f0acbcebea978e x11: 00000000000000e3 x10: 000000010048fe41 x9 : 0000000000000000 x8 : ffff000007b43d90 x7 : 000000007a1e2125 x6 : 0000000000000000 x5 : ffff0000024e0900 x4 : ffff800000a0250c x3 : ffff000007b43c90 x2 : ffff00000294ca98 x1 : ffff000006831920 x0 : 0000000000000000 Call trace: ath10k_sta_statistics+0x10/0x2dc [ath10k_core] sta_set_sinfo+0xcc/0xbd4 ieee80211_get_station+0x2c/0x44 cfg80211_get_station+0x80/0x154 batadv_v_elp_get_throughput+0x138/0x1fc batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x1ec/0x414 worker_thread+0x70/0x46c kthread+0xdc/0xe0 ret_from_fork+0x10/0x20 Code: a9bb7bfd 910003fd a90153f3 f9411c40 (f9402814) This happens because STA has time to disconnect and reconnect before batadv_v_elp_throughput_metric_update() delayed work gets scheduled. In this situation, ath10k_sta_state() can be in the middle of resetting arsta data when the work queue get chance to be scheduled and ends up accessing it. Locking wiphy prevents that.