Out-of-bounds read vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file.

Out-of-bounds read vulnerability/issue exists in CX-Programmer Included in CX-One CXONE-AL[][]D-V4 V9.80 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur.

Out-of-bounds read vulnerability exists in CX-Programmer included in CX-One CXONE-AL[][]D-V4 Ver. 9.81 or lower. Opening a specially crafted project file may lead to information disclosure and/or the product being crashed.

Use after free vulnerability exists in CX-Programmer Included in CX-One CXONE-AL[][]D-V4 V9.80 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur.

Heap-based buffer overflow vulnerability exists in CX-Programmer Included in CX-One CXONE-AL[][]D-V4 V9.80 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur.

Use after free vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file. This vulnerability is different from CVE-2022-25325.

Use after free vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file. This vulnerability is different from CVE-2022-25230.

Out-of-bounds write vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file. This vulnerability is different from CVE-2022-25234.

Heap-based buffer overflow vulnerability exists in CX-Drive All models all versions. By having a user open a specially crafted SDD file, arbitrary code may be executed and/or information may be disclosed.

CX-Motion-MCH v2.32 and earlier contains an access of uninitialized pointer vulnerability. Having a user to open a specially crafted project file may lead to information disclosure and/or arbitrary code execution.

Out-of-bounds write vulnerability in CX-Programmer v9.76.1 and earlier which is a part of CX-One (v4.60) suite allows an attacker to cause information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file. This vulnerability is different from CVE-2022-21124.

Use after free vulnerability exists in CX-Programmer Ver.9.79 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur. This vulnerability is different from CVE-2023-22317 and CVE-2023-22314.

Use after free vulnerability exists in CX-Programmer Ver.9.79 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur. This vulnerability is different from CVE-2023-22277 and CVE-2023-22314.

Use after free vulnerability exists in CX-Programmer Ver.9.79 and earlier. By having a user open a specially crafted CXP file, information disclosure and/or arbitrary code execution may occur. This vulnerability is different from CVE-2023-22277 and CVE-2023-22317.

Use after free vulnerability in CX-Drive V3.00 and earlier allows a local attacker to execute arbitrary code by having a user to open a specially crafted file,

Out-of-bounds write vulnerability exists in CX-Programmer v.9.77 and earlier, which may lead to information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file.

Stack-based buffer overflow vulnerability exists in CX-Programmer v.9.77 and earlier, which may lead to information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file.

Use-after free vulnerability exists in CX-Programmer v.9.77 and earlier, which may lead to information disclosure and/or arbitrary code execution by having a user to open a specially crafted CXP file.

Out-of-bounds read vulnerability in CX-Supervisor v4.0.0.13 and v4.0.0.16 allows an attacker with administrative privileges to cause information disclosure and/or arbitrary code execution by opening a specially crafted SCS project files.

The affected product is vulnerable to an out-of-bounds read via uninitialized pointer, which may allow an attacker to execute arbitrary code.

PDF-XChange Editor J2K File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDF-XChange Editor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of J2K files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20906.

The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted PDF files. This could allow an attacker to execute code in the context of the current process.

The compile_branch function in PCRE before 8.37 allows context-dependent attackers to compile incorrect code, cause a denial of service (out-of-bounds heap read and crash), or possibly have other unspecified impact via a regular expression with a group containing a forward reference repeated a large number of times within a repeated outer group that has a zero minimum quantifier.

PDF-XChange Editor U3D File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDF-XChange Editor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of U3D files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20931.

PDF-XChange Editor U3D File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDF-XChange Editor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of U3D files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24207.

This vulnerability allows remote attackers to disclose sensitive information on affected installations of Foxit Studio Photo 3.6.6.922. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of PNG files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated structure. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the current process. Was ZDI-CAN-10977.

A vulnerability has been identified in Parasolid V34.1 (All versions < V34.1.258), Parasolid V35.0 (All versions < V35.0.254), Teamcenter Visualization V14.1 (All versions), Teamcenter Visualization V14.2 (All versions < V14.2.0.12), Teamcenter Visualization V14.3 (All versions < V14.3.0.9), Teamcenter Visualization V2312 (All versions < V2312.0004). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted X_T files. This could allow an attacker to execute code in the context of the current process.

Out-of-bounds read vulnerability exist in the simulator module contained in the graphic editor 'V-SFT' v6.1.3.0 and earlier, which may allow an attacker to obtain information and/or execute arbitrary code by having a user to open a specially crafted image file.

In MediaInfoLib in MediaArea MediaInfo 20.03, there is a stack-based buffer over-read in Streams_Fill_PerStream in Multiple/File_MpegPs.cpp (aka an off-by-one during MpegPs parsing).

In the Linux kernel, the following vulnerability has been resolved: ext4: validate p_idx bounds in ext4_ext_correct_indexes ext4_ext_correct_indexes() walks up the extent tree correcting index entries when the first extent in a leaf is modified. Before accessing path[k].p_idx->ei_block, there is no validation that p_idx falls within the valid range of index entries for that level. If the on-disk extent header contains a corrupted or crafted eh_entries value, p_idx can point past the end of the allocated buffer, causing a slab-out-of-bounds read. Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at both access sites: before the while loop and inside it. Return -EFSCORRUPTED if the index pointer is out of range, consistent with how other bounds violations are handled in the ext4 extent tree code.

There is a memory corruption vulnerability due to an out of bounds read in GetSymbolBorderRectSize() when using the SymbolEditor in NI Circuit Design Suite.  This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted .sym file. This vulnerability affects NI Circuit Design Suite 14.3.0 and prior versions.

A CWE-125: Out-of-bounds read vulnerability exists inIGSS Definition (Def.exe) V15.0.0.21140 and prior that could result in disclosure of information or remote code execution due to lack of sanity checks on user-supplied input data, when a malicious CGF file is imported to IGSS Definition.

Out-of-bouds read vulnerability in FPWin Pro version 7.7.0.0 and all previous versions may allow attackers to execute arbitrary code via a specially crafted project file.

PDF-XChange Editor U3D File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of PDF-XChange Editor. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of U3D files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-20930.

Santesoft Sante FFT Imaging lacks proper validation of user-supplied data when parsing DICOM files. This could lead to an out-of-bounds read. An attacker could leverage this vulnerability to execute arbitrary code in the context of the current process.

Heap-based buffer overflow in Windows Hyper-V allows an unauthorized attacker to execute code locally.

Adobe Framemaker versions 2022.8 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Photoshop Desktop versions 27.4 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Premiere Pro versions 25.5 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

InDesign Desktop versions 20.5.2, 21.2 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

InCopy versions 20.5.2, 21.2 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code locally.

There is a memory corruption vulnerability due to an out of bounds read in Bitmap::InternalDraw() when using the SymbolEditor in NI Circuit Design Suite.  This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted .sym file. This vulnerability affects NI Circuit Design Suite 14.3.0 and prior versions.

An issue was discovered in Open Design Alliance Drawings SDK before 2023.3. An Out-of-Bounds Read vulnerability exists when reading DWG files in a recovery mode. An attacker can leverage this vulnerability to execute code in the context of the current process.

iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.3, there is a vulnerability IccCmm.cpp:5793 when reading through index during ICC profile processing. The malformed ICC profile triggers improper array bounds validation in the color management module, resulting in an out-of-bounds read that can lead to memory disclosure or segmentation fault from accessing memory beyond the array boundary. This issue has been patched in version 2.3.1.3.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.2.034. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of IFC files. Crafted data in an IFC file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-16573.

Acrobat Reader DC version 22.001.2011x (and earlier), 20.005.3033x (and earlier) and 17.012.3022x (and earlier) are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

A vulnerability has been identified in Simcenter Femap (All versions < V2512), Simcenter Nastran (All versions < V2512). The affected applications contains an out of bounds read vulnerability while parsing specially crafted XDB files. This could allow an attacker to execute code in the context of the current process.

Tungsten Automation Power PDF PNG File Parsing Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tungsten Automation Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PNG files. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24466.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.02.034. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of DXF files. Crafted data in a DXF file can trigger a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-16341.