A vulnerability in lack of validation of user-supplied parameters pass to XML-RPC calls on SonicWall Global Management System (GMS) virtual appliance's, allow remote user to execute arbitrary code. This vulnerability affected GMS version 8.1 and earlier.

A vulnerability, which was classified as critical, was found in Vaelsys 4.1.0. This affects the function execute_DataObjectProc of the file /grid/vgrid_server.php. The manipulation of the argument xajaxargs leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An unspecified function in the web interface in Proofpoint Messaging Security Gateway 6.2.0.263:6.2.0.237 and earlier in Proofpoint Protection Server 5.5.3, 5.5.4, 5.5.5, 6.0.2, 6.1.1, and 6.2.0 allows remote attackers to execute arbitrary commands via unknown vectors, related to a "command injection" issue.

webdist CGI program (webdist.cgi) in SGI IRIX allows remote attackers to execute arbitrary commands via shell metacharacters in the distloc parameter.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in wangzhixuan spring-shiro-training up to 94812c1fd8f7fe796c931f4984ff1aa0671ab562. It has been declared as critical. This vulnerability affects unknown code of the file /role/add. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available.

Mailcwp remote file upload vulnerability incomplete fix v1.100

The npm module "shell-quote" 1.6.0 and earlier cannot correctly escape ">" and "<" operator used for redirection in shell. Applications that depend on shell-quote may also be vulnerable. A malicious user could perform code injection.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21882.

The STARTTLS implementation in MailMarshal before 7.2 allows plaintext command injection.

A server auth command injection authentication bypass vulnerability in Trend Micro Smart Protection Server (Standalone) versions 3.3 and below could allow remote attackers to escalate privileges on vulnerable installations.

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

Cisco Unified Computing System (UCS) Central Software 1.3(1b) and earlier allows remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuv33856.

The isMail transport in PHPMailer before 5.2.20 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code by leveraging improper interaction between the escapeshellarg function and internal escaping performed in the mail function in PHP. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-10033.

A Command Injection vulnerability exists in the getTopologyHistory service of the Apache Storm 2.x prior to 2.2.1 and Apache Storm 1.x prior to 1.2.4. A specially crafted thrift request to the Nimbus server allows Remote Code Execution (RCE) prior to authentication.

Concatenating unsanitized user input in the `whereis` npm module < 0.4.1 allowed an attacker to execute arbitrary commands. The `whereis` module is deprecated and it is recommended to use the `which` npm module instead.

In Schneider Electric U.motion Builder software versions prior to v1.3.4, a remote command injection allows authentication bypass.

An issue was discovered in Leptonica through 1.75.3. The gplotMakeOutput function allows command injection via a $(command) approach in the gplot rootname argument. This issue exists because of an incomplete fix for CVE-2018-3836.

The setFrom function in the Sendmail adapter in the zend-mail component before 2.4.11, 2.5.x, 2.6.x, and 2.7.x before 2.7.2, and Zend Framework before 2.4.11 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted e-mail address.

An unauthenticated remote attacker can perform a command injection in the OCPP Service with limited privileges due to improper input validation.

Haraka version 2.8.8 and earlier comes with a plugin for processing attachments for zip files. Versions 2.8.8 and earlier can be vulnerable to command injection.

statuswml.cgi in Nagios before 3.1.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) ping or (2) Traceroute parameters.

The mail transport (aka Swift_Transport_MailTransport) in Swift Mailer before 5.4.5 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted e-mail address in the (1) From, (2) ReturnPath, or (3) Sender header.

compass-compile through 0.0.1 is vulnerable to Command Injection.It allows execution of arbitrary commands via tha options argument.

The festivaltts4r gem for Ruby allows remote attackers to execute arbitrary commands via shell metacharacters in a string to the (1) to_speech or (2) to_mp3 method in lib/festivaltts4r/festival4r.rb.

A vulnerability was found in Ruijie RG-NBS2009G-P up to 20240305. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /EXCU_SHELL. The manipulation of the argument Command1 leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257281 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability in login.php in Synology Photo Station before 6.5.3-3226 allows remote attackers to execute arbitrary code via shell metacharacters in the crafted 'X-Forwarded-For' header.

pixl-class prior to 1.0.3 allows execution of arbitrary commands. The members argument of the create function can be controlled by users without any sanitization.

An issue was discovered on SendQuick Entera and Avera devices before 2HF16. Multiple Command Injection vulnerabilities allow attackers to execute arbitrary system commands.

A command injection vulnerability has been reported to affect QNAP device, VioStor. If exploited, this vulnerability allows remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR FW 5.1.6 build 20211109 and later

IBM Rational Collaborative Lifecycle Management 3.0.1.6 before iFix8, 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Quality Manager 3.0.1.6 before iFix8, 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Team Concert 3.0.1.6 before iFix8, 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational DOORS Next Generation 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Engineering Lifecycle Manager 4.x before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Rhapsody Design Manager 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; and Rational Software Architect Design Manager 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5 allow remote authenticated users to execute arbitrary OS commands via a crafted request.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.56, R7800 before 1.0.2.68, R8900 before 1.0.4.26, and R9000 before 1.0.4.26.

A vulnerability, which was classified as critical, has been found in Zend.To up to 6.10-6 Beta. This issue affects the function exec of the file NSSDropoff.php. The manipulation of the argument file_1 leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 6.10-7 is able to address this issue. It is recommended to upgrade the affected component. This affects a rather old version of the software. The vendor recommends updating to the latest release. Additional countermeasures have been added in 6.15-8.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 1.10CNB05. Affected is the function setipsec_config of the file /goform/setipsec_config. The manipulation of the argument localIP/remoteIP leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in the lettre crate before 0.9.6 for Rust. In an e-mail message body, an attacker can place a . character after two <CR><LF> sequences and then inject arbitrary SMTP commands.

Versions of the package network before 0.7.0 are vulnerable to Arbitrary Command Injection due to use of the child_process exec function without input sanitization. If (attacker-controlled) user input is given to the mac_address_for function of the package, it is possible for the attacker to execute arbitrary commands on the operating system that this package is being run on.

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

A vulnerability was found in openBI up to 1.0.8 and classified as critical. This issue affects the function dlfile of the file /application/websocket/controller/Setting.php. The manipulation of the argument phpPath leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252473 was assigned to this vulnerability.

In ProLink PRC2402M V1.0.18 and older, the set_ledonoff function in the adm.cgi binary, accessible with a page parameter value of ledonoff contains a trivial command injection where the value of the led_cmd parameter is passed directly to do_system.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

Eval injection vulnerability in the fm_saveHelperGatherItems function in ajax.php in the Form Manager plugin before 1.7.3 for WordPress allows remote attackers to execute arbitrary code via unspecified vectors.

# Vulnerability in `rand-quote` and `hitokoto` plugins **Description**: the `rand-quote` and `hitokoto` fetch quotes from quotationspage.com and hitokoto.cn respectively, do some process on them and then use `print -P` to print them. If these quotes contained the proper symbols, they could trigger command injection. Given that they're an external API, it's not possible to know if the quotes are safe to use. **Fixed in**: [72928432](https://github.com/ohmyzsh/ohmyzsh/commit/72928432). **Impacted areas**: - `rand-quote` plugin (`quote` function). - `hitokoto` plugin (`hitokoto` function).

viewrq.php in nweb2fax 0.2.7 and earlier allows remote attackers to execute arbitrary code via shell metacharacters in the var_filename parameter in a (1) tif or (2) pdf format action.

SolarWinds Log and Event Manager (LEM) allows remote attackers to execute arbitrary commands on managed computers via a request to services/messagebroker/nonsecurestreamingamf involving the traceroute functionality.

In ProLink PRC2402M V1.0.18 and older, the set_sys_cmd function in the adm.cgi binary, accessible with a page parameter value of sysCMD contains a trivial command injection where the value of the command parameter is passed directly to system.

In ProLink PRC2402M V1.0.18 and older, the set_TR069 function in the adm.cgi binary, accessible with a page parameter value of TR069 contains a trivial command injection where the value of the TR069_local_port parameter is passed directly to system.

Nagios XI WatchGuard Wizard before version 1.4.8 is vulnerable to remote code execution through Improper neutralisation of special elements used in an OS Command (OS Command injection).

Symantec Endpoint Protection Manager (SEPM) 12.1 before 12.1-RU6-MP3 allows remote attackers to execute arbitrary OS commands via crafted data.