A vulnerability in the UDP protocol implementation for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to exhaust system resources, resulting in a denial of service (DoS) condition. The vulnerability is due to improper resource management for UDP ingress packets. An attacker could exploit this vulnerability by sending a high rate of UDP packets to an affected system within a short period of time. A successful exploit could allow the attacker to exhaust available system resources, resulting in a DoS condition.
A vulnerability in the email scanning algorithm of Cisco AsyncOS software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to perform a denial of service (DoS) attack against an affected device. This vulnerability is due to insufficient input validation of incoming emails. An attacker could exploit this vulnerability by sending a crafted email through Cisco ESA. A successful exploit could allow the attacker to exhaust all the available CPU resources on an affected device for an extended period of time, preventing other emails from being processed and resulting in a DoS condition.
A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&P users who were authenticated prior to an attack.
A vulnerability in the cryptographic hardware accelerator driver of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the affected devices have a limited amount of Direct Memory Access (DMA) memory and the affected software improperly handles resources in low-memory conditions. An attacker could exploit this vulnerability by sending a sustained, high rate of malicious traffic to an affected device to exhaust memory on the device. A successful exploit could allow the attacker to exhaust DMA memory on the affected device, which could cause the device to reload and result in a temporary DoS condition.
A vulnerability in the connection handling function in Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper traffic handling when platform limits are reached. An attacker could exploit this vulnerability by sending a high rate of UDP traffic through an affected device. A successful exploit could allow the attacker to cause all new, incoming connections to be dropped, resulting in a DoS condition.
A vulnerability in the file descriptor handling of Cisco TelePresence Video Communication Server (VCS) Expressway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to exhaustion of file descriptors while processing a high volume of traffic. An attacker could exploit this vulnerability by establishing a high number of concurrent TCP connections to the vulnerable system. An exploit could allow the attacker to cause a restart in a specific process, resulting in a temporary interruption of service. Cisco Bug IDs: CSCvh77056, CSCvh77058, CSCvh95264.
A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.
A vulnerability in the Snort detection engine integration for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause unlimited memory consumption, which could lead to a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient memory management for certain Snort events. An attacker could exploit this vulnerability by sending a series of crafted IP packets that would generate specific Snort events on an affected device. A sustained attack could cause an out of memory condition on the affected device. A successful exploit could allow the attacker to interrupt all traffic flowing through the affected device. In some circumstances, the attacker may be able to cause the device to reload, resulting in a DoS condition.
A vulnerability in the Snort rule evaluation function of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of the DNS reputation enforcement rule. An attacker could exploit this vulnerability by sending crafted UDP packets through an affected device to force a buildup of UDP connections. A successful exploit could allow the attacker to cause traffic that is going through the affected device to be dropped, resulting in a DoS condition. Note: This vulnerability only affects Cisco FTD devices that are running Snort 3.
A vulnerability in IP ingress packet processing of the Cisco Embedded Wireless Controller with Catalyst Access Points Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, causing a denial of service (DoS) condition. The device may experience a performance degradation in traffic processing or high CPU usage prior to the unexpected reload. This vulnerability is due to improper rate limiting of IP packets to the management interface. An attacker could exploit this vulnerability by sending a steady stream of IP traffic at a high rate to the management interface of the affected device. A successful exploit could allow the attacker to cause the device to reload.
A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.
Multiple Cisco products are affected by a vulnerability in the way the Snort detection engine processes ICMP traffic that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper memory resource management while the Snort detection engine is processing ICMP packets. An attacker could exploit this vulnerability by sending a series of ICMP packets through an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device, causing the device to reload.
Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in dynamic access policies (DAP) functionality of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to improper processing of HostScan data received from the Posture (HostScan) module. An attacker could exploit this vulnerability by sending crafted HostScan data to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.
A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.
A vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a memory handling error that occurs when GRE traffic is processed. An attacker could exploit this vulnerability by sending a crafted GRE payload through an affected device. A successful exploit could allow the attacker to cause the device to restart, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-gre-dos-hmedHQPM"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.
A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506.
A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.
A denial-of-service in Cisco Unified IP Conference Station 7937G 1-4-4-0 through 1-4-5-7 allows attackers restart the device remotely through sending specially crafted packets. Note: We cannot prove this vulnerability exists. Out of an abundance of caution, this CVE is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. For more information on this, and how to upgrade, refer to the CVE’s reference information
A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179.
A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Multiple Cisco products are affected by a vulnerability in Snort rules that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.The vulnerability is due to improper handling of the Block with Reset or Interactive Block with Reset actions if a rule is configured without proper constraints. An attacker could exploit this vulnerability by sending a crafted IP packet to the affected device. A successful exploit could allow the attacker to cause through traffic to be dropped. Note: Only products with Snort3 configured and either a rule with Block with Reset or Interactive Block with Reset actions configured are vulnerable. Products configured with Snort2 are not vulnerable.
Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709.
The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.
A vulnerability in the proxy service of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper memory management in the proxy service of an affected device. An attacker could exploit this vulnerability by establishing a large number of HTTPS connections to the affected device. A successful exploit could allow the attacker to cause the system to stop processing new connections, which could result in a DoS condition. Note: Manual intervention may be required to recover from this situation.
A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.
A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.
A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
The IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) by sending IKE UDP packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCts38429.
Cisco Unified Presence before 8.5(4) does not properly detect recursion during entity expansion, which allows remote attackers to cause a denial of service (memory and CPU consumption, and process crash) via a crafted XML document containing a large number of nested entity references, aka Bug IDs CSCtq89842 and CSCtq88547, a similar issue to CVE-2003-1564.
The ethernet-lldp component in Cisco IOS 12.2 before 12.2(33)SXJ1 does not properly support a large number of LLDP Management Address (MA) TLVs, which allows remote attackers to cause a denial of service (device crash) via crafted LLDPDUs, aka Bug ID CSCtj22354.
The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle an external loop between a pair of dot1x enabled ports, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many unicast EAPoL Protocol Data Units (PDUs), aka Bug ID CSCtq36336.
The do_change_cipher_spec function in OpenSSL 0.9.6c to 0.9.6k, and 0.9.7a to 0.9.7c, allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that triggers a null dereference.
Cisco Unified Personal Communicator 7.0 (1.13056) does not free allocated memory for received data and does not perform validation if memory allocation is successful, causing a remote denial of service condition.
Cisco IOS XR 3.4.0 through 3.9.1, when BGP is enabled, does not properly handle unrecognized transitive attributes, which allows remote attackers to cause a denial of service (peering reset) via a crafted prefix announcement, as demonstrated in the wild in August 2010 with attribute type code 99, aka Bug ID CSCti62211.
A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS 15.0 through 15.6 and Cisco IOS XE 3.5 through 16.5 could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to how an affected device processes certain IKEv2 packets. An attacker could exploit this vulnerability by sending specific IKEv2 packets to an affected device to be processed. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. This vulnerability affects Cisco devices that have the Internet Security Association and Key Management Protocol (ISAKMP) enabled. Although only IKEv2 packets can be used to trigger this vulnerability, devices that are running Cisco IOS Software or Cisco IOS XE Software are vulnerable when ISAKMP is enabled. A device does not need to be configured with any IKEv2-specific features to be vulnerable. Many features use IKEv2, including different types of VPNs such as the following: LAN-to-LAN VPN; Remote-access VPN, excluding SSL VPN; Dynamic Multipoint VPN (DMVPN); and FlexVPN. Cisco Bug IDs: CSCvc41277.
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the HTTP Server feature of Cisco IOS XE Software when the Telephony Service feature is enabled could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a null pointer dereference when accessing specific URLs. An attacker could exploit this vulnerability by sending crafted HTTP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, causing a DoS condition on the affected device.
Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to insufficient resource management while establishing SSL VPN sessions. An attacker could exploit this vulnerability by sending a series of crafted HTTPS requests to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the multicast traceroute version 2 (Mtrace2) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust the UDP packet memory of an affected device. This vulnerability exists because the Mtrace2 code does not properly handle packet memory. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to exhaust the incoming UDP packet memory. The affected device would not be able to process higher-level UDP-based protocols packets, possibly causing a denial of service (DoS) condition. Note: This vulnerability can be exploited using IPv4 or IPv6.
A vulnerability in the SIP call processing function of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper parsing of SIP messages. An attacker could exploit this vulnerability by sending a crafted SIP message to an affected Cisco Unified CM or Cisco Unified CM SME device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition that interrupts the communications of reliant voice and video devices.
A vulnerability in the Resource Reservation Protocol (RSVP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a buffer overflow when processing crafted RSVP packets. An attacker could exploit this vulnerability by sending RSVP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business SPA300 Series IP Phones and Cisco Small Business SPA500 Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly. These vulnerabilities exist because HTTP packets are not properly checked for errors. An attacker could exploit this vulnerability by sending a crafted HTTP packet to the remote interface of an affected device. A successful exploit could allow the attacker to cause a DoS condition on the device.
A vulnerability in the Locator ID Separation Protocol (LISP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to the incorrect handling of LISP packets. An attacker could exploit this vulnerability by sending a crafted LISP packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Note: This vulnerability could be exploited over either IPv4 or IPv6 transport.
A vulnerability in the TCP/IP traffic handling function of the Snort Detection Engine of Cisco Firepower Threat Defense (FTD) Software and Cisco FirePOWER Services could allow an unauthenticated, remote attacker to cause legitimate network traffic to be dropped, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of TCP/IP network traffic. An attacker could exploit this vulnerability by sending a large amount of TCP/IP network traffic through the affected device. A successful exploit could allow the attacker to cause the Cisco FTD device to drop network traffic, resulting in a DoS condition. The affected device must be rebooted to resolve the DoS condition.
Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334.
A vulnerability in the implementation of Network Address Translation (NAT) functionality in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper translation of H.323 messages that use the Registration, Admission, and Status (RAS) protocol and are sent to an affected device via IPv4 packets. An attacker could exploit this vulnerability by sending a crafted H.323 RAS packet through an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to use an application layer gateway with NAT (NAT ALG) for H.323 RAS messages. By default, a NAT ALG is enabled for H.323 RAS messages. Cisco Bug IDs: CSCvc57217.
Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability with the Border Gateway Protocol (BGP) for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to cause a routing process to crash, which could lead to a denial of service (DoS) condition. This vulnerability is due to an issue with the installation of routes upon receipt of a BGP update. An attacker could exploit this vulnerability by sending a crafted BGP update to an affected device. A successful exploit could allow the attacker to cause the routing process to crash, which could cause the device to reload. This vulnerability applies to both Internal BGP (IBGP) and External BGP (EBGP). Note: The Cisco implementation of BGP accepts incoming BGP traffic from explicitly configured peers only. To exploit this vulnerability, an attacker would need to send a specific BGP update message over an established TCP connection that appears to come from a trusted BGP peer.