A vulnerability in the administrative web interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain additional privileges on an affected device. The vulnerability is due to improper controls on certain pages in the web interface. An attacker could exploit this vulnerability by authenticating to the device with an administrator account and sending a crafted HTTP request. A successful exploit could allow the attacker to create additional Admin accounts with different user roles. An attacker could then use these accounts to perform actions within their scope. The attacker would need valid Admin credentials for the device. This vulnerability cannot be exploited to add a Super Admin account.
A vulnerability in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass an access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to errors that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit this vulnerability by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to access resources that are behind the affected device and would typically be protected by the interface ACL.
A vulnerability in the authentication and authorization checking mechanisms of Cisco Wireless LAN Controller (WLC) Software could allow an authenticated, adjacent attacker to gain network access to a Cisco TrustSec domain. Under normal circumstances, this access should be prohibited. The vulnerability is due to the dynamic assignment of Security Group Tags (SGTs) during a wireless roam from one Service Set Identifier (SSID) to another within the Cisco TrustSec domain. An attacker could exploit this vulnerability by attempting to acquire an SGT from other SSIDs within the domain. Successful exploitation could allow the attacker to gain privileged network access that should be prohibited under normal circumstances.
A vulnerability in the Disaster Recovery framework of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), and Cisco Unity Connection could allow an authenticated, remote attacker to perform certain administrative actions they should not be able to. This vulnerability is due to insufficient access control checks on the affected device. An attacker with read-only privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to perform a set of administrative actions they should not be able to.
Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain escalated privileges. This vulnerability is due to improper access control on files within the affected system. A local attacker could exploit this vulnerability by modifying certain files on the vulnerable device. If successful, the attacker could gain escalated privileges and take actions on the system with the privileges of the root user.
A vulnerability in the Graphite web interface of the Policy and Charging Rules Function (PCRF) of Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access the Graphite web interface. The attacker would need to have access to the internal VLAN where CPS is deployed. The vulnerability is due to lack of authentication. An attacker could exploit this vulnerability by directly connecting to the Graphite web interface. An exploit could allow the attacker to access various statistics and Key Performance Indicators (KPIs) regarding the Cisco Policy Suite environment.
A vulnerability in the Stealthwatch Management Console (SMC) of Cisco Stealthwatch Enterprise could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected system. The vulnerability is due to an insecure system configuration. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. An exploit could allow the attacker to gain unauthenticated access, resulting in elevated privileges in the SMC.
A vulnerability in the configuration file protections of Cisco Virtualized Infrastructure Manager (VIM) could allow an authenticated, local attacker to access confidential information and elevate privileges on an affected device. This vulnerability is due to improper access permissions for certain configuration files. An attacker with low-privileged credentials could exploit this vulnerability by accessing an affected device and reading the affected configuration files. A successful exploit could allow the attacker to obtain internal database credentials, which the attacker could use to view and modify the contents of the database. The attacker could use this access to the database to elevate privileges on the affected device.
A vulnerability in the binding configuration of Cisco SD-WAN vManage Software containers could allow an unauthenticated, adjacent attacker who has access to the VPN0 logical network to also access the messaging service ports on an affected system. This vulnerability exists because the messaging server container ports on an affected system lack sufficient protection mechanisms. An attacker could exploit this vulnerability by connecting to the messaging service ports of the affected system. To exploit this vulnerability, the attacker must be able to send network traffic to interfaces within the VPN0 logical network. This network may be restricted to protect logical or physical adjacent networks, depending on device deployment configuration. A successful exploit could allow the attacker to view and inject messages into the messaging service, which can cause configuration changes or cause the system to reload.
A vulnerability in the MACsec Key Agreement (MKA) using Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic through a Layer 3 interface of an affected device. The vulnerability is due to a logic error in the affected software. An attacker could exploit this vulnerability by connecting to and passing traffic through a Layer 3 interface of an affected device, if the interface is configured for MACsec MKA using EAP-TLS and is running in access-session closed mode. A successful exploit could allow the attacker to bypass 802.1x network access controls and gain access to the network.
A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.
A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976.
A vulnerability in the account management subsystem of Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. The vulnerability is due to improper implementation of access controls. An attacker could exploit this vulnerability by authenticating to the device as a specific user to gain the information needed to elevate privileges to root in a separate login shell. A successful exploit could allow the attacker to escape the CLI subshell and execute system-level commands on the underlying operating system as root. Cisco Bug IDs: CSCvj93548.
A vulnerability in the anti-spam protection mechanisms of Cisco AsyncOS Software for the Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass certain content filters on an affected device. The vulnerability is due to incomplete input and validation checking mechanisms for certain Sender Policy Framework (SPF) messages that are sent to an affected device. An attacker could exploit this vulnerability by sending a customized SPF packet to an affected device. If successful, an exploit could allow the attacker to bypass the URL filters that are configured for the affected device, which could allow malicious URLs to pass through the device.
A vulnerability in certain authentication controls in the account services of Cisco Spark could allow an authenticated, remote attacker to interact with and view information on an affected device that would normally be prohibited. The vulnerability is due to the improper display of user-account tokens generated in the system. An attacker could exploit this vulnerability by logging in to the device with a token in use by another account. Successful exploitation could allow the attacker to cause a partial impact to the device's confidentiality, integrity, and availability. Cisco Bug IDs: CSCvg05206.
A vulnerability in the access control logic of the Secure Shell (SSH) server of Cisco IOS and IOS XE Software may allow connections sourced from a virtual routing and forwarding (VRF) instance despite the absence of the vrf-also keyword in the access-class configuration. The vulnerability is due to a missing check in the SSH server. An attacker could use this vulnerability to open an SSH connection to an affected Cisco IOS or IOS XE device with a source address belonging to a VRF instance. Once connected, the attacker would still need to provide valid credentials to access the device.
A vulnerability in Cisco Webex Teams, formerly Cisco Spark, could allow an authenticated, remote attacker to view and modify data for an organization other than their own organization. The vulnerability exists because the affected software performs insufficient checks for associations between user accounts and organization accounts. An attacker who has administrator or compliance officer privileges for one organization account could exploit this vulnerability by using those privileges to view and modify data for another organization account. No customer data was impacted by this vulnerability.
A vulnerability in the web application of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to specify non-log files as sources for syslog reporting. This vulnerability is due to improper restriction of the syslog configuration. An attacker could exploit this vulnerability by configuring non-log files as sources for syslog reporting through the web application. A successful exploit could allow the attacker to read non-log files on the CSPC.
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query.
A vulnerability in the access control list (ACL) programming of Cisco ASR 900 and ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect programming of hardware when an ACL is configured using a method other than the configuration CLI. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device.
A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.
Multiple vulnerabilities in the web UI and API endpoints of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow a remote attacker to perform a command injection or file upload attack on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Zone-Based Policy Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent the Zone-Based Policy Firewall from correctly classifying traffic. This vulnerability exists because ICMP and UDP responder-to-initiator flows are not inspected when the Zone-Based Policy Firewall has either Unified Threat Defense (UTD) or Application Quality of Experience (AppQoE) configured. An attacker could exploit this vulnerability by attempting to send UDP or ICMP flows through the network. A successful exploit could allow the attacker to inject traffic through the Zone-Based Policy Firewall, resulting in traffic being dropped because it is incorrectly classified or in incorrect reporting figures being produced by high-speed logging (HSL).
Multiple vulnerabilities in Cisco Intersight Virtual Appliance could allow an unauthenticated, adjacent attacker to access sensitive internal services from an external interface. These vulnerabilities are due to insufficient restrictions for IPv4 or IPv6 packets that are received on the external management interface. An attacker could exploit these vulnerabilities by sending specific traffic to this interface on an affected device. A successful exploit could allow the attacker to access sensitive internal services and make configuration changes on the affected device.
A vulnerability in the Link Layer Discovery Protocol (LLDP) for Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, adjacent attacker to disable switching on a small form-factor pluggable (SFP) interface. This vulnerability is due to incomplete validation of the source of a received LLDP packet. An attacker could exploit this vulnerability by sending a crafted LLDP packet on an SFP interface to an affected device. A successful exploit could allow the attacker to disable switching on the SFP interface, which could disrupt network traffic.
A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.
An Incorrect Access Control vulnerability was found in /smsa/admin_teacher_register_approval.php and /smsa/admin_teacher_register_approval_submit.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to view and approve Teacher registration.
An Incorrect Access Control vulnerability was found in /smsa/add_class.php and /smsa/add_class_submit.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to add a new class entry.
Infoblox NIOS through 8.6.4 has Improper Access Control for Grids.
A vulnerability on Mitel 6800 Series and 6900 Series SIP Phones through 6.3 SP3 HF4, 6900w Series SIP Phone through 6.3.3, and 6970 Conference Unit through 5.1.1 SP8 allows an unauthenticated attacker to conduct an unauthorized access attack due to improper access control. A successful exploit could allow an attacker to gain unauthorized access to user information or the system configuration.
On EX4300, EX4600, QFX3500, and QFX5100 Series, a vulnerability in the IP firewall filter component may cause the firewall filter evaluation of certain packets to fail. This issue only affects firewall filter evaluation of certain packets destined to the device Routing Engine (RE). This issue does not affect the Layer 2 firewall filter evaluation nor does it affect the Layer 3 firewall filter evaluation destined to connected hosts. This issue may occur when evaluating both IPv4 or IPv6 packets. This issue affects Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D12 on QFX5100 Series and EX4600 Series; 14.1X53 versions prior to 14.1X53-D52 on QFX3500 Series; 14.1X53 versions prior to 14.1X53-D48 on EX4300 Series; 15.1 versions prior to 15.1R7-S3 on EX4300 Series; 16.1 versions prior to 16.1R7 on EX4300 Series; 17.1 versions prior to 17.1R3 on EX4300 Series; 17.2 versions prior to 17.2R3 on EX4300 Series; 17.3 versions prior to 17.3R2-S5, 17.3R3 on EX4300 Series; 17.4 versions prior to 17.4R2 on EX4300 Series; 18.1 versions prior to 18.1R3 on EX4300 Series; 18.2 versions prior to 18.2R2 on EX4300 Series.
A vulnerability classified as critical has been found in Software AG WebMethods 10.11.x/10.15.x. Affected is an unknown function of the file wm.server/connect/. The manipulation leads to improper access controls. It is possible to launch the attack remotely. To access a file like /assets/ a popup may request username and password. By just clicking CANCEL you will be redirected to the directory. If you visited /invoke/wm.server/connect, you'll be able to see details like internal IPs, ports, and versions. In some cases if access to /assets/ is refused, you may enter /assets/x as a wrong value, then come back to /assets/ which we will show the requested data. It appears that insufficient access control is depending on referrer header data. VDB-247158 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
An issue was discovered in Italtel i-MCS NFV 12.1.0-20211215. There is Incorrect Access Control.
An attacker with weak credentials could access the TCP port via an open FTP port, allowing an attacker to read sensitive files and write to remotely executable directories.
Totolink N200RE_V5 V9.3.5u.6255_B20211224 is vulnerable to Incorrect Access Control. The device allows remote attackers to obtain Wi-Fi system information, such as Wi-Fi SSID and Wi-Fi password, without logging into the management page.
LRM does not implement authentication or authorization by default. A malicious actor can inject, replay, modify, and/or intercept sensitive data.
In Bonitasoft runtime Community edition, the lack of dynamic permissions causes IDOR vulnerability. Dynamic permissions existed only in Subscription edition and have now been restored in Community edition, where they are not custmizable.
Alldata V0.4.6 is vulnerable to Incorrect Access Control. A total of many modules interface documents have been leaked.For example, the /api/system/v2/api-docs module.
Lexmark MX6500 LW75.JD.P296 and previous devices have Incorrect Access Control via the access control settings.
Improper Access Control in GitHub repository publify/publify prior to 9.2.8.
Northern.tech Mender Server before 3.7.11 and 4.x before 4.0.1 has Incorrect Access Control.
Improper access control vulnerability in Devklan's Alma Blog that affects versions 2.1.10 and earlier. This vulnerability could allow an unauthenticated user to access the application's functionalities without the need for credentials.
Vulnerability in the Oracle Marketing product of Oracle E-Business Suite (component: Partners). Supported versions that are affected are 12.2.3-12.2.13. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Marketing. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Marketing accessible data as well as unauthorized read access to a subset of Oracle Marketing accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N).
FirstUseAuthenticator is a JupyterHub authenticator that helps new users set their password on their first login to JupyterHub. When JupyterHub is used with FirstUseAuthenticator, a vulnerability in versions prior to 1.0.0 allows unauthorized access to any user's account if `create_users=True` and the username is known or guessed. One may upgrade to version 1.0.0 or apply a patch manually to mitigate the vulnerability. For those who cannot upgrade, there is no complete workaround, but a partial mitigation exists. One can disable user creation with `c.FirstUseAuthenticator.create_users = False`, which will only allow login with fully normalized usernames for already existing users prior to jupyterhub-firstuserauthenticator 1.0.0. If any users have never logged in with their normalized username (i.e. lowercase), they will still be vulnerable until a patch or upgrade occurs.
The vantage6 technology enables to manage and deploy privacy enhancing technologies like Federated Learning (FL) and Multi-Party Computation (MPC). Nodes and servers get a ssh config by default that permits root login with password authentication. In a proper deployment, the SSH service is not exposed so there is no risk, but not all deployments are ideal. The default should therefore be less permissive. The vulnerability can be mitigated by removing the ssh part from the docker file and rebuilding the docker image. Version 4.2.0 patches the vulnerability.
Vulnerability in the Oracle Application Object Library product of Oracle E-Business Suite (component: DB Privileges). Supported versions that are affected are 12.2.3-12.2.13. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Application Object Library. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Application Object Library accessible data as well as unauthorized read access to a subset of Oracle Application Object Library accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N).
A vulnerability classified as critical was found in Totolink N350RT 9.3.5u.6265. This vulnerability affects unknown code of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. The manipulation leads to improper access controls. The attack can be initiated remotely. It is recommended to upgrade the affected component. VDB-250786 is the identifier assigned to this vulnerability.