A vulnerability in the web-based UI of Cisco HyperFlex HX Data Platform Software could allow an unauthenticated, remote attacker to access sensitive information on an affected system. The vulnerability is due to a lack of proper input and authorization of HTTP requests. An attacker could exploit this vulnerability by sending a malicious HTTP request to the web-based UI of an affected system. A successful exploit could allow the attacker to access files that may contain sensitive data.

A vulnerability in the user management functions of Cisco Registered Envelope Service could allow an unauthenticated, remote attacker to discover sensitive user information. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to an insecure configuration that allows improper indexing. An attacker could exploit this vulnerability by using a search engine to look for specific data strings. A successful exploit could allow the attacker to discover certain sensitive information about the application, including usernames.

Cisco Adaptive Security Appliance (ASA) Software 8.2 through 9.4.3.3 allows remote attackers to bypass intended ICMP Echo Reply ACLs via vectors related to subtypes.

The Cisco Linksys WVC54GC wireless video camera before firmware 1.25 sends cleartext configuration data in response to a Setup Wizard remote-management command, which allows remote attackers to obtain sensitive information such as passwords by sniffing the network.

A vulnerability in Cisco Smart Licensing Utility could allow an unauthenticated, remote attacker to access sensitive information. This vulnerability is due to excessive verbosity in a debug log file. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain log files that contain sensitive data, including credentials that can be used to access the API.

A vulnerability in the Out-of-Band (OOB) Plug and Play (PnP) feature of Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an unauthenticated, remote attacker to read arbitrary files. This vulnerability is due to an unauthenticated provisioning web server. An attacker could exploit this vulnerability through direct web requests to the provisioning server. A successful exploit could allow the attacker to read sensitive files in the PnP container that could facilitate further attacks on the PnP infrastructure.

A vulnerability in the web-based management interface of Cisco IP Phone firmware could allow an unauthenticated, remote attacker to retrieve sensitive information from an affected device. This vulnerability is due to a lack of authentication for specific endpoints of the web-based management interface on an affected device. An attacker could exploit this vulnerability by connecting to the affected device. A successful exploit could allow the attacker to gain unauthorized access to the device, enabling the recording of user credentials and traffic to and from the affected device, including VoIP calls that could be replayed.

A vulnerability in the password change feature of Cisco Firepower Management Center (FMC) software could allow an unauthenticated, remote attacker to determine valid user names on an affected device. This vulnerability is due to improper authentication of password update responses. An attacker could exploit this vulnerability by forcing a password reset on an affected device. A successful exploit could allow the attacker to determine valid user names in the unauthenticated response to a forced password reset.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to access sensitive information. This vulnerability is due to missing authorization for certain resources in the web-based management interface together with insufficient entropy in these resource names. An attacker could exploit this vulnerability by sending a series of HTTPS requests to an affected device to enumerate resources on the device. A successful exploit could allow the attacker to retrieve sensitive information from the device.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed.

A vulnerability in the TLS handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain access to sensitive information. This vulnerability is due to improper implementation of countermeasures against a Bleichenbacher attack on a device that uses SSL decryption policies. An attacker could exploit this vulnerability by sending crafted TLS messages to an affected device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device.

A vulnerability in the handling of RSA keys on devices running Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to retrieve an RSA private key. This vulnerability is due to a logic error when the RSA key is stored in memory on a hardware platform that performs hardware-based cryptography. An attacker could exploit this vulnerability by using a Lenstra side-channel attack against the targeted device. A successful exploit could allow the attacker to retrieve the RSA private key. The following conditions may be observed on an affected device: This vulnerability will apply to approximately 5 percent of the RSA keys on a device that is running a vulnerable release of Cisco ASA Software or Cisco FTD Software; not all RSA keys are expected to be affected due to mathematical calculations applied to the RSA key. The RSA key could be valid but have specific characteristics that make it vulnerable to the potential leak of the RSA private key. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. See the Indicators of Compromise section for more information on the detection of this type of RSA key. The RSA key could be malformed and invalid. A malformed RSA key is not functional, and a TLS client connection to a device that is running Cisco ASA Software or Cisco FTD Software that uses the malformed RSA key will result in a TLS signature failure, which means a vulnerable software release created an invalid RSA signature that failed verification. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic.

A vulnerability in authentication mechanism of Cisco Software-Defined Application Visibility and Control (SD-AVC) on Cisco vManage could allow an unauthenticated, remote attacker to access the GUI of Cisco SD-AVC without authentication. This vulnerability exists because the GUI is accessible on self-managed cloud installations or local server installations of Cisco vManage. An attacker could exploit this vulnerability by accessing the exposed GUI of Cisco SD-AVC. A successful exploit could allow the attacker to view managed device names, SD-AVC logs, and SD-AVC DNS server IP addresses.

A vulnerability in authentication mechanism of Cisco Software-Defined Application Visibility and Control (SD-AVC) on Cisco vManage could allow an unauthenticated, remote attacker to access the GUI of Cisco SD-AVC using a default static username and password combination. This vulnerability exists because the GUI is accessible on self-managed cloud installations or local server installations of Cisco vManage. An attacker could exploit this vulnerability by accessing the exposed GUI of Cisco SD-AVC. A successful exploit could allow the attacker to view managed device names, SD-AVC logs, and SD-AVC DNS server IP addresses.

A vulnerability in the Web-Based Reputation Score (WBRS) engine of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to bypass established web request policies and access blocked content on an affected device. This vulnerability is due to incorrect handling of certain character combinations inserted into a URL. An attacker could exploit this vulnerability by sending crafted URLs to be processed by an affected device. A successful exploit could allow the attacker to bypass the web proxy and access web content that has been blocked by policy.

A vulnerability in the web-based management interface of Cisco ECE could allow an unauthenticated, remote attacker to perform a username enumeration attack against an affected device. This vulnerability is due to differences in authentication responses that are sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to an affected device. A successful exploit could allow the attacker to confirm existing user accounts, which could be used in further attacks. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Cisco IP Phone (VoIP) 7920 1.0(8) contains certain hard-coded ("fixed") public and private SNMP community strings that cannot be changed, which allows remote attackers to obtain sensitive information.

A vulnerability in the Day One setup process of Cisco IOS XE Software for Catalyst 9800 Series Wireless Controllers for Cloud (9800-CL) could allow an unauthenticated, remote attacker to access the public-key infrastructure (PKI) server that is running on an affected device. This vulnerability is due to incomplete cleanup upon completion of the Day One setup process. An attacker could exploit this vulnerability by sending Simple Certificate Enrollment Protocol (SCEP) requests to an affected device. A successful exploit could allow the attacker to request a certificate from the virtual wireless controller and then use the acquired certificate to join an attacker-controlled device to the virtual wireless controller.

A vulnerability in the Multiprotocol Label Switching (MPLS) packet handling function of Cisco SD-WAN Software could allow an unauthenticated, remote attacker to gain access to information stored in MPLS buffer memory. This vulnerability is due to insufficient handling of malformed MPLS packets that are processed by a device that is running Cisco SD-WAN Software. An attacker could exploit this vulnerability by sending a crafted MPLS packet to an affected device that is running Cisco SD-WAN Software or Cisco SD-WAN vManage Software. A successful exploit could allow the attacker to gain unauthorized access to sensitive information.

A vulnerability in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to enumerate user accounts. This vulnerability is due to the improper handling of HTTP headers. An attacker could exploit this vulnerability by sending authenticated requests to an affected system. A successful exploit could allow the attacker to compare the HTTP responses that are returned by the affected system to determine which accounts are valid user accounts.

A vulnerability in the Local Packet Transport Services (LPTS) programming of the SNMP with the management plane protection feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to allow connections despite the management plane protection that is configured to deny access to the SNMP server of an affected device. This vulnerability is due to incorrect LPTS programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by connecting to an affected device using SNMP. A successful exploit could allow the attacker to connect to the device on the configured SNMP ports. Valid credentials are required to execute any of the SNMP requests.

A vulnerability in the cluster management interface of Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system. To be affected by this vulnerability, the Cisco SD-WAN vManage Software must be in cluster mode. This vulnerability is due to the absence of authentication for sensitive information in the cluster management interface. An attacker could exploit this vulnerability by sending a crafted request to the cluster management interface of an affected system. A successful exploit could allow the attacker to allow the attacker to view sensitive information on the affected system.

A vulnerability in the authentication for the general purpose APIs implementation of Cisco Email Security Appliance (ESA), Cisco Content Security Management Appliance (SMA), and Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to access general system information and certain configuration information from an affected device. The vulnerability exists because a secure authentication token is not required when authenticating to the general purpose API. An attacker could exploit this vulnerability by sending a crafted request for information to the general purpose API on an affected device. A successful exploit could allow the attacker to obtain system and configuration information from the affected device, resulting in an unauthorized information disclosure.

A vulnerability in the FlexConnect Upgrade feature of Cisco Aironet Series Access Points Software could allow an unauthenticated, remote attacker to obtain confidential information from an affected device. This vulnerability is due to an unrestricted Trivial File Transfer Protocol (TFTP) configuration. An attacker could exploit this vulnerability by sending a specific TFTP request to an affected device. A successful exploit could allow the attacker to download any file from the filesystem of the affected access point (AP).

A vulnerability in the Tool for Auto-Registered Phones Support (TAPS) of Cisco Unified Communications Manager (UCM) and Cisco Unified Communications Manager Session Management Edition (SME) could allow an unauthenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to insufficient validation of user-supplied input to the TAPS interface of the affected device. An attacker could exploit this vulnerability by sending a crafted request to the TAPS interface. A successful exploit could allow the attacker to read arbitrary files in the system.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to obtain confidential information from an affected device. The vulnerability is due to missing authentication on a specific part of the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the interface. A successful exploit could allow the attacker to read confidential information from an affected device.

A vulnerability in Cisco Webex Meetings Suite sites and Cisco Webex Meetings Online sites could allow an unauthenticated, remote attendee to join a password-protected meeting without providing the meeting password. The connection attempt must initiate from a Webex mobile application for either iOS or Android. The vulnerability is due to unintended meeting information exposure in a specific meeting join flow for mobile applications. An unauthorized attendee could exploit this vulnerability by accessing a known meeting ID or meeting URL from the mobile device’s web browser. The browser will then request to launch the device’s Webex mobile application. A successful exploit could allow the unauthorized attendee to join the password-protected meeting. The unauthorized attendee will be visible in the attendee list of the meeting as a mobile attendee. Cisco has applied updates that address this vulnerability and no user action is required. This vulnerability affects Cisco Webex Meetings Suite sites and Cisco Webex Meetings Online sites releases earlier than 39.11.5 and 40.1.3.

A vulnerability in Cisco Webex Meetings and Cisco Webex Meetings Server could allow an unauthenticated, remote attacker to view sensitive information from the meeting room lobby. This vulnerability is due to insufficient protection of sensitive participant information. An attacker could exploit this vulnerability by browsing the Webex roster. A successful exploit could allow the attacker to gather information about other Webex participants, such as email address and IP address, while waiting in the lobby.

A vulnerability in the API subsystem of Cisco Meetings App could allow an unauthenticated, remote attacker to retain and reuse the Traversal Using Relay NAT (TURN) server credentials that are configured in an affected system. The vulnerability is due to insufficient protection mechanisms for the TURN server credentials. An attacker could exploit this vulnerability by intercepting the legitimate traffic that is generated by an affected system. An exploit could allow the attacker to obtain the TURN server credentials, which the attacker could use to place audio/video calls and forward packets through the configured TURN server. The attacker would not be able to take control of the TURN server unless the same credentials were used in multiple systems.

A vulnerability in the implementation of the Low Power, Wide Area (LPWA) subsystem of Cisco IOS Software for Cisco 800 Series Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data or cause a denial of service (DoS) condition. The vulnerability is due to a lack of input and validation checking mechanisms for virtual-LPWA (VLPWA) protocol modem messages. An attacker could exploit this vulnerability by supplying crafted packets to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data or cause the VLPWA interface of the affected device to shut down, resulting in DoS condition.

A vulnerability in Cisco Integrated Management Controller could allow an unauthenticated, remote attacker to enumerate valid usernames within the vulnerable application. The vulnerability is due to differences in authentication responses sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to the affected application. A successful exploit could allow the attacker to confirm the names of administrative user accounts for use in further attacks.There are no workarounds that address this vulnerability.

Directory traversal vulnerability in the fmserver servlet in Cisco Prime Data Center Network Manager (DCNM) before 7.1(1) allows remote attackers to read arbitrary files via a crafted pathname, aka Bug ID CSCus00241.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to gain access to sensitive files on an affected device. The vulnerability is due to incorrect permissions settings on affected DCNM software. An attacker could exploit this vulnerability by connecting to the web-based management interface of an affected device and requesting specific URLs. A successful exploit could allow the attacker to download arbitrary files from the underlying filesystem of the affected device.

Vulnerability in the Elasticsearch database used in the of Cisco SD-WAN vManage software could allow an unauthenticated, remote attacker to access the Elasticsearch configuration database of an affected device with the privileges of the elasticsearch user. These vulnerability is due to the presence of a static username and password configured on the vManage. An attacker could exploit this vulnerability by sending a crafted HTTP request to a reachable vManage on port 9200. A successful exploit could allow the attacker to view the Elasticsearch database content. There are workarounds that address this vulnerability.

A vulnerability in the deterministic random bit generator (DRBG), also known as pseudorandom number generator (PRNG), in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco ASA 5506-X, ASA 5508-X, and ASA 5516-X Firewalls could allow an unauthenticated, remote attacker to cause a cryptographic collision, enabling the attacker to discover the private key of an affected device. This vulnerability is due to insufficient entropy in the DRBG for the affected hardware platforms when generating cryptographic keys. An attacker could exploit this vulnerability by generating a large number of cryptographic keys on an affected device and looking for collisions with target devices. A successful exploit could allow the attacker to impersonate an affected target device or to decrypt traffic secured by an affected key that is sent to or from an affected target device.

A vulnerability in Cisco Nexus Dashboard could allow an unauthenticated, remote attacker to enumerate LDAP user accounts. This vulnerability is due to the improper handling of LDAP authentication requests. An attacker could exploit this vulnerability by sending authentication requests to an affected system. A successful exploit could allow an attacker to determine which usernames are valid LDAP user accounts.

A vulnerability in the API subsystem and in the web-management interface of Cisco Network Services Orchestrator (NSO) could allow an unauthenticated, remote attacker to access sensitive data. This vulnerability exists because the web-management interface and certain HTTP-based APIs do not properly validate user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains directory traversal character sequences to an affected system. A successful exploit could allow the attacker to access sensitive files on the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the cluster management interface of Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system. To be affected by this vulnerability, the vManage software must be in cluster mode. This vulnerability is due to the absence of authentication for sensitive information in the cluster management interface. An attacker could exploit this vulnerability by sending a crafted request to the cluster management interface of an affected system. A successful exploit could allow the attacker to view sensitive information on the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Cisco IOS 12.0 through 12.2, when IP routing is disabled, accepts false ICMP redirect messages, which allows remote attackers to cause a denial of service (network routing modification).

The administrative web interface in the Access Control Server in Cisco Secure Access Control System (ACS) does not properly restrict the report view page, which allows remote authenticated users to obtain sensitive information via a direct request, aka Bug ID CSCue79279.

The web interface in Cisco Secure Access Control System (ACS) does not properly suppress error-condition details, which allows remote authenticated users to obtain sensitive information via an unspecified request that triggers an error, aka Bug ID CSCue65957.

The web portal in Cisco Unified Communications Manager (Unified CM) allows remote authenticated users to obtain sensitive stack-trace information via unspecified vectors that trigger a stack exception, aka Bug ID CSCug34854.

Cisco Mobility Services Engine does not properly set up the Oracle SSL service, which allows remote attackers to obtain an unauthenticated session to the database-replication port, and consequently obtain sensitive information, via an SSL connection, aka Bug ID CSCue50794.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper access control to files within the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to gain access to sensitive configuration information, including user authentication credentials.