I-O DATA DEVICE TS-WRLP firmware version 1.01.02 and earlier and TS-WRLA firmware version 1.01.02 and earlier allows an attacker with administrator rights to execute arbitrary OS commands via unspecified vectors.
Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If an attacker logs in to the affected product with an administrative account and manipulates requests for a certain screen operation, an arbitrary OS command may be executed. This vulnerability was reported on a different screen operation from CVE-2025-20617.
UD-LT1 firmware Ver.2.1.9 and earlier and UD-LT1/EX firmware Ver.2.1.9 and earlier allow a remote authenticated attacker with an administrative account to execute arbitrary OS commands.
WN-G300R3 firmware 1.03 and earlier allows attackers with administrator rights to execute arbitrary OS commands via unspecified vectors.
Buffer overflow in I-O DATA DEVICE TS-WRLP firmware version 1.01.02 and earlier and TS-WRLA firmware version 1.01.02 and earlier allows an attacker with administrator rights to cause a denial-of-service (DoS) or execute arbitrary code via unspecified vectors.
I-O DATA DEVICE WFS-SR01 firmware version 1.10 and earlier allow remote attackers to execute arbitrary OS commands via unspecified vectors.
Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in I-O DATA network attached hard disk 'HDL-T Series' firmware Ver.1.21 and earlier when 'Remote Link3 function' is enabled. If exploited, a remote unauthenticated attacker may execute an arbitrary OS command.
Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If a user logs in to CLI of the affected product, an arbitrary OS command may be executed.
Devices with IP address setting tool "MagicalFinder" provided by I-O DATA DEVICE, INC. allow authenticated attackers to execute arbitrary OS commands via unspecified vectors.
TS-WPTCAM firmware version 1.18 and earlier, TS-WPTCAM2 firmware version 1.00, TS-WLCE firmware version 1.18 and earlier, TS-WLC2 firmware version 1.18 and earlier, TS-WRLC firmware version 1.17 and earlier, TS-PTCAM firmware version 1.18 and earlier, TS-PTCAM/POE firmware version 1.18 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.
WN-AX1167GR firmware version 3.00 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.
Multiple products provided by iND Co.,Ltd contain an OS command injection vulnerability. If exploited, an arbitrary OS command may be executed and sensitive information may be obtained. As for the details of affected product names and versions, refer to the information under [Product Status].
A10 Thunder ADC CsrRequestView Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of A10 Thunder ADC. Authentication is required to exploit this vulnerability. The specific flaw exists within the CsrRequestView class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of a10user. Was ZDI-CAN-22517.
The EyesOfNetwork web interface (aka eonweb) 5.1-0 allows remote command execution via shell metacharacters in a hosts_cacti array parameter to module/admin_device/index.php.
CouchDB administrative users can configure the database server via HTTP(S). Some of the configuration options include paths for operating system-level binaries that are subsequently launched by CouchDB. This allows an admin user in Apache CouchDB before 1.7.0 and 2.x before 2.1.1 to execute arbitrary shell commands as the CouchDB user, including downloading and executing scripts from the public internet.
The web-based GUI in Cisco Cloud Services Platform (CSP) 2100 2.0 allows remote authenticated administrators to execute arbitrary OS commands as root via crafted platform commands, aka Bug ID CSCva00541.
A vulnerability was found in TRENDnet TEW-800MB 1.0.1.0 and classified as critical. Affected by this issue is some unknown functionality of the component POST Request Handler. The manipulation of the argument DeviceURL leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252122 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Tecno 4G Portable WiFi TR118 TR118-M30E-RR-D-EnFrArSwHaPo-OP-V008-20220830. It has been declared as critical. This vulnerability affects unknown code of the file /goform/goform_get_cmd_process of the component Ping Tool. The manipulation of the argument url leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-246130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability in the Intelligent Platform Management Interface (IPMI) of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of user-supplied commands. An attacker who has administrator privileges and access to the network where the IPMI resides could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to gain root privileges on the affected device.
A command injection (missing input validation) issue in the IP address field for the logging server in the configuration web interface on the Akuvox R50P VoIP phone with firmware 50.0.6.156 allows an authenticated remote attacker in the same network to trigger OS commands via shell metacharacters in a POST request.
app/backup/index.php in the Backup Module in FusionPBX 4.4.3 suffers from a command injection vulnerability due to a lack of input validation, which allows authenticated administrative attackers to execute commands on the host.
BEC Technologies Multiple Routers sys ping Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of BEC Technologies Multiple Routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the management interface, which listens on TCP port 22 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-25903.
The setSystemTime function in Foscam Cameras C1 Lite V3, and C1 V3 with firmware 2.82.2.33 and earlier, FI9800P V3, FI9803P V4, FI9851P V3, and FI9853EP V2 2.84.2.33 and earlier, FI9816P V3, FI9821EP V2, FI9821P V3, FI9826P V3, and FI9831P V3 2.81.2.33 and earlier, C1, C1 V2, C1 Lite, and C1 Lite V2 2.52.2.47 and earlier, FI9800P, FI9800P V2, FI9803P V2, FI9803P V3, and FI9851P V2 2.54.2.47 and earlier, FI9815P, FI9815P V2, FI9816P, and FI9816P V2, 2.51.2.47 and earlier, R2 and R4 2.71.1.59 and earlier, C2 and FI9961EP 2.72.1.59 and earlier, FI9900EP, FI9900P, and FI9901EP 2.74.1.59 and earlier, FI9928P 2.74.1.58 and earlier, FI9803EP and FI9853EP 2.22.2.31 and earlier, FI9803P and FI9851P 2.24.2.31 and earlier, FI9821P V2, FI9826P V2, FI9831P V2, and FI9821EP 2.21.2.31 and earlier, FI9821W V2, FI9831W, FI9826W, FI9821P, FI9831P, and FI9826P 2.11.1.120 and earlier, FI9818W V2 2.13.2.120 and earlier, FI9805W, FI9804W, FI9804P, FI9805E, and FI9805P 2.14.1.120 and earlier, FI9828P, and FI9828W 2.13.1.120 and earlier, and FI9828P V2 2.11.1.133 and earlier allows remote authenticated users to execute arbitrary commands via a ';' in the ntpServer argument. NOTE: this issue exists because of an incomplete fix for CVE-2017-2849.
On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, OS command injection is possible as a result of incorrect processing of the res_buf parameter to index.cgi.
IBM Security Guardium 11.2 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 199184.
A vulnerability, which was classified as critical, has been found in Poly Trio 8300, Trio 8500, Trio 8800, Trio C60, CCX 350, CCX 400, CCX 500, CCX 505, CCX 600, CCX 700, EDGE E100, EDGE E220, EDGE E300, EDGE E320, EDGE E350, EDGE E400, EDGE E450, EDGE E500, EDGE E550, VVX 101, VVX 150, VVX 201, VVX 250, VVX 300, VVX 301, VVX 310, VVX 311, VVX 350, VVX 400, VVX 401, VVX 410, VVX 411, VVX 450, VVX 500, VVX 501, VVX 600 and VVX 601. This issue affects some unknown processing of the component Diagnostic Telnet Mode. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. The identifier VDB-249257 was assigned to this vulnerability.
An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_battery_mode` POST parameter.
The Port Forwarding functionality on DASAN H660GW devices allows remote attackers to execute arbitrary code via shell metacharacters in the cgi-bin/adv_nat_virsvr.asp Addr parameter (aka the Local IP Address field).
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS.
A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker who has valid administrative access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the web UI and then submitting that form. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device, which could lead to complete system compromise.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
A vulnerability in the software upgrade process of Cisco TelePresence Collaboration Endpoint Software and Cisco RoomOS Software could allow an authenticated, remote attacker to modify the filesystem to cause a denial of service (DoS) or gain privileged access to the root filesystem. The vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by sending requests with malformed parameters to the system using the console, Secure Shell (SSH), or web API. A successful exploit could allow the attacker to modify the device configuration or cause a DoS.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
In PostgreSQL 9.3 through 11.2, the "COPY TO/FROM PROGRAM" function allows superusers and users in the 'pg_execute_server_program' group to execute arbitrary code in the context of the database's operating system user. This functionality is enabled by default and can be abused to run arbitrary operating system commands on Windows, Linux, and macOS. NOTE: Third parties claim/state this is not an issue because PostgreSQL functionality for ‘COPY TO/FROM PROGRAM’ is acting as intended. References state that in PostgreSQL, a superuser can execute commands as the server user without using the ‘COPY FROM PROGRAM’.
An OS command injection vulnerability exists in the httpd txt/restore.cgi functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network request can lead to arbitrary command execution. An attacker can send an HTTP request to trigger this vulnerability.
Zen Load Balancer 3.10.1 allows remote authenticated admin users to execute arbitrary commands as root via shell metacharacters in the index.cgi?action=View_Cert certname parameter.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4.1, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 and BIG-IQ 7.0.0-7.1.0.2, 6.0.0-6.1.0, and 5.1.0-5.4.0, an undisclosed iControl REST worker is vulnerable to command injection by an admin/resource admin user. This issue impacts both iControl REST and tmsh implementations.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.5, 13.0.0-13.1.1.4, 12.1.0-12.1.4.1, and 11.5.1-11.6.4 and BIG-IQ 6.0.0-6.1.0 and 5.1.0-5.4.0, an undisclosed iControl REST worker vulnerable to command injection for an Administrator user.
Remote command injection vulnerability in Verizon Fios Quantum Gateway (G1100) firmware version 02.01.00.05 allows a remote, authenticated attacker to execute arbitrary commands on the target device by adding an access control rule for a network object with a crafted hostname.
An exploitable command injection vulnerability exists in the hostname functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted entry to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send various authenticated requests to trigger this vulnerability.
Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in +F FS010M versions prior to V2.0.0_1101. If this vulnerability is exploited, an arbitrary OS command may be executed by a remote authenticated attacker with an administrative privilege.
A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.
A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands and obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input in the Certificate Signing Request (CSR) function of the web-based management interface. An attacker could exploit this vulnerability by submitting a crafted CSR in the web-based management interface. A successful exploit could allow an attacker with administrator privileges to execute arbitrary commands on the device with full root privileges.
A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. An attacker would need to have valid administrator credentials on the device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker with elevated privileges could exploit this vulnerability by sending crafted commands to the administrative web management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.
A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.
Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative privileges on the DCNM application to inject arbitrary commands on the underlying operating system (OS). For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.