The MapPress Maps for WordPress plugin before 2.93 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).

The MapPress Maps for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Map block in all versions up to, and including, 2.94.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The MapPress Maps for WordPress plugin before 2.88.15 does not sanitize and escape the map title when outputting it back in the admin dashboard, allowing Contributors and above roles to perform Stored Cross-Site Scripting attacks

The MapPress Maps for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the width and height parameters in all versions up to, and including, 2.88.16 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The MapPress Maps for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the map title parameter in all versions up to and including 2.88.13 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers with contributor access or higher to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The MapPress Maps for WordPress plugin before 2.94.9 does not sanitise and escape some parameters when outputing them in the page, which could allow users with a role as low as contributor to perform Cross-Site Scripting attacks.

The MapPress Maps for WordPress plugin before 2.73.4 does not sanitise and escape the mapid parameter before outputting it back in the "Bad mapid" error message, leading to a Reflected Cross-Site Scripting

A vulnerability in the web-based management interface of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected device. The vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious data into a specific data field in an affected interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface.

Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface of an affected system. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.

A vulnerability was found in Portabilis i-Educar 2.10. It has been declared as problematic. This vulnerability affects unknown code of the file /intranet/public_uf_cad.php. The manipulation of the argument nome leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Fullworks Quick Event Manager plugin <= 9.6.4 versions.

A vulnerability has been found in Portabilis i-Educar 2.10 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /usuarios/tipos/novo. The manipulation of the argument name/description leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the web-based management interface of Cisco IOS XE Wireless Controller software for the Catalyst 9000 Family of switches could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against another user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by authenticating to the device as a high-privileged user, adding certain configurations with malicious code in one of its fields, and persuading another user to click on it. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or to access sensitive, browser-based information.

Multiple vulnerabilities in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit these vulnerabilities by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Flyzoo Flyzoo Chat plugin <= 2.3.3 versions.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in WP Table Builder plugin <= 1.4.6 versions.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in GalleryPlugins Video Contest plugin <= 3.2 versions.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Gopi Ramasamy Continuous announcement scroller plugin <= 13.0 versions.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Zia Imtiaz Custom Login Page Styler for WordPress plugin <= 6.2 versions.

Auth. Stored Cross-Site Scripting (XSS) vulnerability in GD bbPress Attachments plugin <= 4.3.1 on WordPress.

A vulnerability, which was classified as problematic, has been found in Portabilis i-Educar 2.10. Affected by this issue is some unknown functionality of the file /intranet/educar_motivo_afastamento_cad.php. The manipulation of the argument nm_motivo leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A cross-site scripting (XSS) vulnerability in the Search Settings module of WBCE CMS v1.5.4 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Footer field.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Chameleon plugin <= 1.4.3 on WordPress.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Apptivo Apptivo Business Site CRM plugin <= 3.0.12 versions.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Artica PFMS Pandora FMS v765 on all allows Cross-Site Scripting (XSS). A user with edition privileges can create a Payload in the reporting dashboard module. An admin user can observe the Payload without interaction and attacker can get information.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. The vulnerabilities are due to insufficient input validation by the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Boris Kuzmanov 0mk Shortener plugin <= 0.2 versions.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Anthologize plugin <= 0.8.0 on WordPress.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Gus Sevilla WP Clictracker plugin <= 1.0.5 versions.

A cross-site scripting (XSS) vulnerability in the Overview Page settings module of WBCE CMS v1.5.4 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Post Loop field.

A cross-site scripting (XSS) vulnerability in the Modify Page module of WBCE CMS v1.5.4 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Source field.

A cross-site scripting (XSS) vulnerability in the Search Settings module of WBCE CMS v1.5.4 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Results Header field.

A cross-site scripting (XSS) vulnerability in the Show Advanced Option module of WBCE CMS v1.5.4 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Section Header field.

A cross-site scripting (XSS) vulnerability in the Search Settings module of WBCE CMS v1.5.4 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Results Footer field.

There is a stored cross-site scripting (XSS) vulnerability in Webmin 2.002 and below via the Cluster Cron Job tab Input field, which allows attackers to run malicious scripts by injecting a specially crafted payload.

Web-Based Student Clearance System v1.0 was discovered to contain a cross-site scripting (XSS) vulnerability in /Admin/add-student.php. This vulnerability allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the txtfullname parameter.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Denis Buka Content Repeater – Custom Posts Simplified plugin <= 1.1.13 versions.

Multiple Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerabilities in Accordions plugin <= 2.0.3 on WordPress via &addons-style-name and &accordions_or_faqs_license_key.

Auth. (admin+) Stored Cross-Site Scripting vulnerability in Yannick Lefebvre Community Events plugin <= 1.4.8 versions.

Web-Based Student Clearance System v1.0 was discovered to contain a cross-site scripting (XSS) vulnerability in Admin/add-admin.php. This vulnerability allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the txtfullname parameter.

Auth. (author+) Stored Cross-Site Scripting (XSS) vulnerability in 1app Technologies, Inc 1app Business Forms plugin <= 1.0.0 versions.

A vulnerability was found in Portabilis i-Educar 2.10. It has been classified as problematic. This affects an unknown part of the file /intranet/public_municipio_cad.php. The manipulation of the argument nome leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in YITH YITH WooCommerce Tab Manager allows Stored XSS.This issue affects YITH WooCommerce Tab Manager: from n/a through 1.35.0.

Stored cross-site scripting vulnerability in Zenphoto versions prior to 1.6 allows remote a remote authenticated attacker with an administrative privilege to inject an arbitrary script.

Emlog Pro v1.7.1 was discovered to contain a reflected cross-site scripting (XSS) vulnerability at /admin/store.php.

A vulnerability classified as problematic was found in Portabilis i-Educar 2.10. Affected by this vulnerability is an unknown functionality of the file /module/RegraAvaliacao/edit. The manipulation of the argument nome leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The WP Attachments WordPress plugin before 5.0.6 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).

In Splunk Enterprise versions below 8.1.12, 8.2.9, and 9.0.2, a remote user that holds the “power” Splunk role can store arbitrary scripts that can lead to persistent cross-site scripting (XSS). The vulnerability affects instances with Splunk Web enabled.

Auth. (admin+) Stored Cross-Site Scripting (XSS) vulnerability in Custom Product Tabs for WooCommerce plugin <= 1.7.9 on WordPress.

A vulnerability was found in Portabilis i-Educar 2.10 and classified as problematic. Affected by this issue is some unknown functionality of the file /intranet/public_distrito_cad.php. The manipulation of the argument nome leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.