In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix listen() setting the bar too high for the prealloc rings AF_RXRPC's listen() handler lets you set the backlog up to 32 (if you bump up the sysctl), but whilst the preallocation circular buffers have 32 slots in them, one of them has to be a dead slot because we're using CIRC_CNT(). This means that listen(rxrpc_sock, 32) will cause an oops when the socket is closed because rxrpc_service_prealloc_one() allocated one too many calls and rxrpc_discard_prealloc() won't then be able to get rid of them because it'll think the ring is empty. rxrpc_release_calls_on_socket() then tries to abort them, but oopses because call->peer isn't yet set. Fix this by setting the maximum backlog to RXRPC_BACKLOG_MAX - 1 to match the ring capacity. BUG: kernel NULL pointer dereference, address: 0000000000000086 ... RIP: 0010:rxrpc_send_abort_packet+0x73/0x240 [rxrpc] Call Trace: <TASK> ? __wake_up_common_lock+0x7a/0x90 ? rxrpc_notify_socket+0x8e/0x140 [rxrpc] ? rxrpc_abort_call+0x4c/0x60 [rxrpc] rxrpc_release_calls_on_socket+0x107/0x1a0 [rxrpc] rxrpc_release+0xc9/0x1c0 [rxrpc] __sock_release+0x37/0xa0 sock_close+0x11/0x20 __fput+0x89/0x240 task_work_run+0x59/0x90 do_exit+0x319/0xaa0

In the Linux kernel, the following vulnerability has been resolved: drbd: only clone bio if we have a backing device Commit c347a787e34cb (drbd: set ->bi_bdev in drbd_req_new) moved a bio_set_dev call (which has since been removed) to "earlier", from drbd_request_prepare to drbd_req_new. The problem is that this accesses device->ldev->backing_bdev, which is not NULL-checked at this point. When we don't have an ldev (i.e. when the DRBD device is diskless), this leads to a null pointer deref. So, only allocate the private_bio if we actually have a disk. This is also a small optimization, since we don't clone the bio to only to immediately free it again in the diskless case.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check bo_va->bo is non-NULL before using it The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it.

A vulnerability has been found in GNU Binutils 2.44 and classified as problematic. This vulnerability affects the function bfd_elf_get_str_section of the file bfd/elf.c of the component BFD Library. The manipulation leads to null pointer dereference. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The name of the patch is db856d41004301b3a56438efd957ef5cabb91530. It is recommended to apply a patch to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: ensure the fw_info is not null before using it This resolves the dereference null return value warning reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly When an extended state component is not present in fpstate, but in init state, the function copies from init_fpstate via copy_feature(). But, dynamic states are not present in init_fpstate because of all-zeros init states. Then retrieving them from init_fpstate will explode like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:memcpy_erms+0x6/0x10 ? __copy_xstate_to_uabi_buf+0x381/0x870 fpu_copy_guest_fpstate_to_uabi+0x28/0x80 kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm] ? __this_cpu_preempt_check+0x13/0x20 ? vmx_vcpu_put+0x2e/0x260 [kvm_intel] kvm_vcpu_ioctl+0xea/0x6b0 [kvm] ? kvm_vcpu_ioctl+0xea/0x6b0 [kvm] ? __fget_light+0xd4/0x130 __x64_sys_ioctl+0xe3/0x910 ? debug_smp_processor_id+0x17/0x20 ? fpregs_assert_state_consistent+0x27/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Adjust the 'mask' to zero out the userspace buffer for the features that are not available both from fpstate and from init_fpstate. The dynamic features depend on the compacted XSAVE format. Ensure it is enabled before reading XCOMP_BV in init_fpstate.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix size validation for non-exclusive domains (v4) Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the requested memory exists, else we get a kernel oops when dereferencing "man". v2: Make the patch standalone, i.e. not dependent on local patches. v3: Preserve old behaviour and just check that the manager pointer is not NULL. v4: Complain if GTT domain requested and it is uninitialized--most likely a bug.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Validate the box size for the snooped cursor Invalid userspace dma surface copies could potentially overflow the memcpy from the surface to the snooped image leading to crashes. To fix it the dimensions of the copybox have to be validated against the expected size of the snooped cursor.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix null-ptr-deref in ext4_write_info I caught a null-ptr-deref bug as follows: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339 RIP: 0010:ext4_write_info+0x53/0x1b0 [...] Call Trace: dquot_writeback_dquots+0x341/0x9a0 ext4_sync_fs+0x19e/0x800 __sync_filesystem+0x83/0x100 sync_filesystem+0x89/0xf0 generic_shutdown_super+0x79/0x3e0 kill_block_super+0xa1/0x110 deactivate_locked_super+0xac/0x130 deactivate_super+0xb6/0xd0 cleanup_mnt+0x289/0x400 __cleanup_mnt+0x16/0x20 task_work_run+0x11c/0x1c0 exit_to_user_mode_prepare+0x203/0x210 syscall_exit_to_user_mode+0x5b/0x3a0 do_syscall_64+0x59/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ================================================================== Above issue may happen as follows: ------------------------------------- exit_to_user_mode_prepare task_work_run __cleanup_mnt cleanup_mnt deactivate_super deactivate_locked_super kill_block_super generic_shutdown_super shrink_dcache_for_umount dentry = sb->s_root sb->s_root = NULL <--- Here set NULL sync_filesystem __sync_filesystem sb->s_op->sync_fs > ext4_sync_fs dquot_writeback_dquots sb->dq_op->write_info > ext4_write_info ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2) d_inode(sb->s_root) s_root->d_inode <--- Null pointer dereference To solve this problem, we use ext4_journal_start_sb directly to avoid s_root being used.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping() Our syzkaller report a null pointer dereference, root cause is following: __blk_mq_alloc_map_and_rqs set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs blk_mq_alloc_map_and_rqs blk_mq_alloc_rqs // failed due to oom alloc_pages_node // set->tags[hctx_idx] is still NULL blk_mq_free_rqs drv_tags = set->tags[hctx_idx]; // null pointer dereference is triggered blk_mq_clear_rq_mapping(drv_tags, ...) This is because commit 63064be150e4 ("blk-mq: Add blk_mq_alloc_map_and_rqs()") merged the two steps: 1) set->tags[hctx_idx] = blk_mq_alloc_rq_map() 2) blk_mq_alloc_rqs(..., set->tags[hctx_idx]) into one step: set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs() Since tags is not initialized yet in this case, fix the problem by checking if tags is NULL pointer in blk_mq_clear_rq_mapping().

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: fix NULL-pointer dereferences There are several places where we can crash the kernel by requesting lines, unbinding the GPIO device, then calling any of the system calls relevant to the GPIO character device's annonymous file descriptors: ioctl(), read(), poll(). While I observed it with the GPIO simulator, it will also happen for any of the GPIO devices that can be hot-unplugged - for instance any HID GPIO expander (e.g. CP2112). This affects both v1 and v2 uAPI. This fixes it partially by checking if gdev->chip is not NULL but it doesn't entirely remedy the situation as we still have a race condition in which another thread can remove the device after the check.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix null ndlp ptr dereference in abnormal exit path for GFT_ID An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to lpfc_nlp_put() with a null pointer to a nodelist structure. Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon entry.

In the Linux kernel, the following vulnerability has been resolved: net: sched: sfb: fix null pointer access issue when sfb_init() fails When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK>

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tsens: Fix null pointer dereference compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c) as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null pointer dereference (if DEBUG or DYNAMIC_DEBUG set). Fix this bug by adding null pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: ssh_css: Fix a null-pointer dereference in load_video_binaries The allocation failure of mycs->yuv_scaler_binary in load_video_binaries() is followed with a dereference of mycs->yuv_scaler_binary after the following call chain: sh_css_pipe_load_binaries() |-> load_video_binaries(mycs->yuv_scaler_binary == NULL) | |-> sh_css_pipe_unload_binaries() |-> unload_video_binaries() In unload_video_binaries(), it calls to ia_css_binary_unload with argument &pipe->pipe_settings.video.yuv_scaler_binary[i], which refers to the same memory slot as mycs->yuv_scaler_binary. Thus, a null-pointer dereference is triggered.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Can't set dst buffer to done when lat decode error Core thread will call v4l2_m2m_buf_done to set dst buffer done for lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to free dst buffer when lat decode error, core thread will access kernel NULL pointer dereference, then crash.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kfd_process_device_init_vm error handling Should only destroy the ib_mem and let process cleanup worker to free the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid NULL pointer access in process destroy worker. BUG: kernel NULL pointer dereference, address: 0000000000000010 Call Trace: amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu] kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu] kfd_process_destroy_pdds+0x71/0x190 [amdgpu] kfd_process_wq_release+0x2a2/0x3b0 [amdgpu] process_one_work+0x2a1/0x600 worker_thread+0x39/0x3d0

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Assign dummy when codec not specified for a DAI link MediaTek sound card drivers are checking whether a DAI link is present and used on a board to assign the correct parameters and this is done by checking the codec DAI names at probe time. If no real codec is present, assign the dummy codec to the DAI link to avoid NULL pointer during string comparison.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null-deref in dm_resume [Why] Fixing smatch error: dm_resume() error: we previously assumed 'aconnector->dc_link' could be null [How] Check if dc_link null at the beginning of the loop, so further checks can be dropped.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix crash on hci_create_cis_sync When attempting to connect multiple ISO sockets without using DEFER_SETUP may result in the following crash: BUG: KASAN: null-ptr-deref in hci_create_cis_sync+0x18b/0x2b0 Read of size 2 at addr 0000000000000036 by task kworker/u3:1/50 CPU: 0 PID: 50 Comm: kworker/u3:1 Not tainted 6.0.0-rc7-02243-gb84a13ff4eda #4373 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x19/0x27 kasan_report+0xbc/0xf0 ? hci_create_cis_sync+0x18b/0x2b0 hci_create_cis_sync+0x18b/0x2b0 ? get_link_mode+0xd0/0xd0 ? __ww_mutex_lock_slowpath+0x10/0x10 ? mutex_lock+0xe0/0xe0 ? get_link_mode+0xd0/0xd0 hci_cmd_sync_work+0x111/0x190 process_one_work+0x427/0x650 worker_thread+0x87/0x750 ? process_one_work+0x650/0x650 kthread+0x14e/0x180 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ext4: don't allow journal inode to have encrypt flag Mounting a filesystem whose journal inode has the encrypt flag causes a NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt' mount option is used. The problem is that when jbd2_journal_init_inode() calls bmap(), it eventually finds its way into ext4_iomap_begin(), which calls fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if the inode is encrypted, then its encryption key must already be set up. That's not the case here, since the journal inode is never "opened" like a normal file would be. Hence the crash. A reproducer is: mkfs.ext4 -F /dev/vdb debugfs -w /dev/vdb -R "set_inode_field <8> flags 0x80808" mount /dev/vdb /mnt -o inlinecrypt To fix this, make ext4 consider journal inodes with the encrypt flag to be invalid. (Note, maybe other flags should be rejected on the journal inode too. For now, this is just the minimal fix for the above issue.) I've marked this as fixing the commit that introduced the call to fscrypt_limit_io_blocks(), since that's what made an actual crash start being possible. But this fix could be applied to any version of ext4 that supports the encrypt feature.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: bpftool: Fix undefined behavior in qsort(NULL, 0, ...) When netfilter has no entry to display, qsort is called with qsort(NULL, 0, ...). This results in undefined behavior, as UBSan reports: net.c:827:2: runtime error: null pointer passed as argument 1, which is declared to never be null Although the C standard does not explicitly state whether calling qsort with a NULL pointer when the size is 0 constitutes undefined behavior, Section 7.1.4 of the C standard (Use of library functions) mentions: "Each of the following statements applies unless explicitly stated otherwise in the detailed descriptions that follow: If an argument to a function has an invalid value (such as a value outside the domain of the function, or a pointer outside the address space of the program, or a null pointer, or a pointer to non-modifiable storage when the corresponding parameter is not const-qualified) or a type (after promotion) not expected by a function with variable number of arguments, the behavior is undefined." To avoid this, add an early return when nf_link_info is NULL to prevent calling qsort with a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Lag, fix failure to cancel delayed bond work Commit 0d4e8ed139d8 ("net/mlx5: Lag, avoid lockdep warnings") accidentally removed a call to cancel delayed bond work thus it may cause queued delay to expire and fall on an already destroyed work queue. Fix by restoring the call cancel_delayed_work_sync() before destroying the workqueue. This prevents call trace such as this: [ 329.230417] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 329.231444] #PF: supervisor write access in kernel mode [ 329.232233] #PF: error_code(0x0002) - not-present page [ 329.233007] PGD 0 P4D 0 [ 329.233476] Oops: 0002 [#1] SMP [ 329.234012] CPU: 5 PID: 145 Comm: kworker/u20:4 Tainted: G OE 6.0.0-rc5_mlnx #1 [ 329.235282] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 329.236868] Workqueue: mlx5_cmd_0000:08:00.1 cmd_work_handler [mlx5_core] [ 329.237886] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 329.238585] Code: f0 0f b1 17 75 02 f3 c3 89 c6 e9 6f 3c 5f ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 02 f3 c3 89 c6 e9 45 3c 5f ff 0f 1f 44 00 00 0f 1f [ 329.241156] RSP: 0018:ffffc900001b0e98 EFLAGS: 00010046 [ 329.241940] RAX: 0000000000000000 RBX: ffffffff82374ae0 RCX: 0000000000000000 [ 329.242954] RDX: 0000000000000001 RSI: 0000000000000014 RDI: 0000000000000000 [ 329.243974] RBP: ffff888106ccf000 R08: ffff8881004000c8 R09: ffff888100400000 [ 329.244990] R10: 0000000000000000 R11: ffffffff826669f8 R12: 0000000000002000 [ 329.246009] R13: 0000000000000005 R14: ffff888100aa7ce0 R15: ffff88852ca80000 [ 329.247030] FS: 0000000000000000(0000) GS:ffff88852ca80000(0000) knlGS:0000000000000000 [ 329.248260] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 329.249111] CR2: 0000000000000000 CR3: 000000016d675001 CR4: 0000000000770ee0 [ 329.250133] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 329.251152] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 329.252176] PKRU: 55555554

In the Linux kernel, the following vulnerability has been resolved: media: coda: Add check for dcoda_iram_alloc As the coda_iram_alloc may return NULL pointer, it should be better to check the return value in order to avoid NULL poineter dereference, same as the others.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix a null-ptr-deref in tipc_topsrv_accept syzbot found a crash in tipc_topsrv_accept: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] Workqueue: tipc_rcv tipc_topsrv_accept RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487 Call Trace: <TASK> tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 It was caused by srv->listener that might be set to null by tipc_topsrv_stop() in net .exit whereas it's still used in tipc_topsrv_accept() worker. srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to avoid the null-ptr-deref. To ensure the lsock is not released during the tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop() where it's waiting until the tipc_topsrv_accept worker to be done. Note that sk_callback_lock is used to protect sk->sk_user_data instead of srv->listener, and it should check srv in tipc_topsrv_listener_data_ready() instead. This also ensures that no more tipc_topsrv_accept worker will be started after tipc_conn_close() is called in tipc_topsrv_stop() where it sets sk->sk_user_data to null.

In the Linux kernel, the following vulnerability has been resolved: mtd: lpddr2_nvm: Fix possible null-ptr-deref It will cause null-ptr-deref when resource_size(add_range) invoked, if platform_get_resource() returns NULL.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/qcom/lmh: Check for SCM availability at probe Up until now, the necessary scm availability check has not been performed, leading to possible null pointer dereferences (which did happen for me on RB1). Fix that.

In the Linux kernel, the following vulnerability has been resolved: net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt7*-sdw: harden jack_detect_handler Realtek headset codec drivers typically check if the card is instantiated before proceeding with the jack detection. The rt700, rt711 and rt711-sdca are however missing a check on the card pointer, which can lead to NULL dereferences encountered in driver bind/unbind tests.

In the Linux kernel, the following vulnerability has been resolved: tracing/eprobes: Have event probes be consistent with kprobes and uprobes Currently, if a symbol "@" is attempted to be used with an event probe (eprobes), it will cause a NULL pointer dereference crash. Both kprobes and uprobes can reference data other than the main registers. Such as immediate address, symbols and the current task name. Have eprobes do the same thing. For "comm", if "comm" is used and the event being attached to does not have the "comm" field, then make it the "$comm" that kprobes has. This is consistent to the way histograms and filters work.

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error The initial settings will be written before the codec probe function. But, the rt711->component doesn't be assigned yet. If IO error happened during initial settings operations, it will cause the kernel panic. This patch changed component->dev to slave->dev to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: md/bitmap: don't set sb values if can't pass sanity check If bitmap area contains invalid data, kernel will crash then mdadm triggers "Segmentation fault". This is cluster-md speical bug. In non-clustered env, mdadm will handle broken metadata case. In clustered array, only kernel space handles bitmap slot info. But even this bug only happened in clustered env, current sanity check is wrong, the code should be changed. How to trigger: (faulty injection) dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb mdadm -Ss echo aaa > magic.txt == below modifying slot 2 bitmap data == dd if=magic.txt of=/dev/sda seek=16384 bs=1 count=3 <== destroy magic dd if=/dev/zero of=/dev/sda seek=16436 bs=1 count=4 <== ZERO chunksize mdadm -A /dev/md0 /dev/sda /dev/sdb == kernel crashes. mdadm outputs "Segmentation fault" == Reason of kernel crash: In md_bitmap_read_sb (called by md_bitmap_create), bad bitmap magic didn't block chunksize assignment, and zero value made DIV_ROUND_UP_SECTOR_T() trigger "divide error". Crash log: kernel: md: md0 stopped. kernel: md/raid1:md0: not clean -- starting background reconstruction kernel: md/raid1:md0: active with 2 out of 2 mirrors kernel: dlm: ... ... kernel: md-cluster: Joined cluster 44810aba-38bb-e6b8-daca-bc97a0b254aa slot 1 kernel: md0: invalid bitmap file superblock: bad magic kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2 kernel: md-cluster: Could not gather bitmaps from slot 2 kernel: divide error: 0000 [#1] SMP NOPTI kernel: CPU: 0 PID: 1603 Comm: mdadm Not tainted 5.14.6-1-default kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod] kernel: RSP: 0018:ffffc22ac0843ba0 EFLAGS: 00010246 kernel: ... ... kernel: Call Trace: kernel: ? dlm_lock_sync+0xd0/0xd0 [md_cluster 77fe..7a0] kernel: md_bitmap_copy_from_slot+0x2c/0x290 [md_mod 24ea..d3a] kernel: load_bitmaps+0xec/0x210 [md_cluster 77fe..7a0] kernel: md_bitmap_load+0x81/0x1e0 [md_mod 24ea..d3a] kernel: do_md_run+0x30/0x100 [md_mod 24ea..d3a] kernel: md_ioctl+0x1290/0x15a0 [md_mod 24ea....d3a] kernel: ? mddev_unlock+0xaa/0x130 [md_mod 24ea..d3a] kernel: ? blkdev_ioctl+0xb1/0x2b0 kernel: block_ioctl+0x3b/0x40 kernel: __x64_sys_ioctl+0x7f/0xb0 kernel: do_syscall_64+0x59/0x80 kernel: ? exit_to_user_mode_prepare+0x1ab/0x230 kernel: ? syscall_exit_to_user_mode+0x18/0x40 kernel: ? do_syscall_64+0x69/0x80 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xae kernel: RIP: 0033:0x7f4a15fa722b kernel: ... ... kernel: ---[ end trace 8afa7612f559c868 ]--- kernel: RIP: 0010:md_bitmap_create+0x1d1/0x850 [md_mod]

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel crash at mt7921_pci_remove The crash log shown it is possible that mt7921_irq_handler is called while devm_free_irq is being handled so mt76_free_device need to be postponed until devm_free_irq is completed to solve the crash we free the mt76 device too early. [ 9299.339655] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9299.339705] #PF: supervisor read access in kernel mode [ 9299.339735] #PF: error_code(0x0000) - not-present page [ 9299.339768] PGD 0 P4D 0 [ 9299.339786] Oops: 0000 [#1] SMP PTI [ 9299.339812] CPU: 1 PID: 1624 Comm: prepare-suspend Not tainted 5.15.14-1.fc32.qubes.x86_64 #1 [ 9299.339863] Hardware name: Xen HVM domU, BIOS 4.14.3 01/20/2022 [ 9299.339901] RIP: 0010:mt7921_irq_handler+0x1e/0x70 [mt7921e] [ 9299.340048] RSP: 0018:ffffa81b80c27cb0 EFLAGS: 00010082 [ 9299.340081] RAX: 0000000000000000 RBX: ffff98a4cb752020 RCX: ffffffffa96211c5 [ 9299.340123] RDX: 0000000000000000 RSI: 00000000000d4204 RDI: ffff98a4cb752020 [ 9299.340165] RBP: ffff98a4c28a62a4 R08: ffff98a4c37a96c0 R09: 0000000080150011 [ 9299.340207] R10: 0000000040000000 R11: 0000000000000000 R12: ffff98a4c4eaa080 [ 9299.340249] R13: ffff98a4c28a6360 R14: ffff98a4cb752020 R15: ffff98a4c28a6228 [ 9299.340297] FS: 00007260840d3740(0000) GS:ffff98a4ef700000(0000) knlGS:0000000000000000 [ 9299.340345] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9299.340383] CR2: 0000000000000008 CR3: 0000000004c56001 CR4: 0000000000770ee0 [ 9299.340432] PKRU: 55555554 [ 9299.340449] Call Trace: [ 9299.340467] <TASK> [ 9299.340485] __free_irq+0x221/0x350 [ 9299.340527] free_irq+0x30/0x70 [ 9299.340553] devm_free_irq+0x55/0x80 [ 9299.340579] mt7921_pci_remove+0x2f/0x40 [mt7921e] [ 9299.340616] pci_device_remove+0x3b/0xa0 [ 9299.340651] __device_release_driver+0x17a/0x240 [ 9299.340686] device_driver_detach+0x3c/0xa0 [ 9299.340714] unbind_store+0x113/0x130 [ 9299.340740] kernfs_fop_write_iter+0x124/0x1b0 [ 9299.340775] new_sync_write+0x15c/0x1f0 [ 9299.340806] vfs_write+0x1d2/0x270 [ 9299.340831] ksys_write+0x67/0xe0 [ 9299.340857] do_syscall_64+0x3b/0x90 [ 9299.340887] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: net: phy: at803x: fix NULL pointer dereference on AR9331 PHY Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: validate mandatory meta and payload Check for mandatory netlink attributes in payload and meta expression when used embedded from the inner expression, otherwise NULL pointer dereference is possible from userspace.

In the Linux kernel, the following vulnerability has been resolved: drm/komeda: check for error-valued pointer komeda_pipeline_get_state() may return an error-valued pointer, thus check the pointer for negative or null value before dereferencing.

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix metadata dst->dev xmit null pointer dereference When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: cnl: Do not process IPC reply before firmware boot It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3.

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix NULL pointer dereference in iavf_get_link_ksettings Fix possible NULL pointer dereference, due to freeing of adapter->vf_res in iavf_init_get_resources. Previous commit introduced a regression, where receiving IAVF_ERR_ADMIN_QUEUE_NO_WORK from iavf_get_vf_config would free adapter->vf_res. However, netdev is still registered, so ethtool_ops can be called. Calling iavf_get_link_ksettings with no vf_res, will result with: [ 9385.242676] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9385.242683] #PF: supervisor read access in kernel mode [ 9385.242686] #PF: error_code(0x0000) - not-present page [ 9385.242690] PGD 0 P4D 0 [ 9385.242696] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 9385.242701] CPU: 6 PID: 3217 Comm: pmdalinux Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 9385.242708] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 9385.242710] RIP: 0010:iavf_get_link_ksettings+0x29/0xd0 [iavf] [ 9385.242745] Code: 00 0f 1f 44 00 00 b8 01 ef ff ff 48 c7 46 30 00 00 00 00 48 c7 46 38 00 00 00 00 c6 46 0b 00 66 89 46 08 48 8b 87 68 0e 00 00 <f6> 40 08 80 75 50 8b 87 5c 0e 00 00 83 f8 08 74 7a 76 1d 83 f8 20 [ 9385.242749] RSP: 0018:ffffc0560ec7fbd0 EFLAGS: 00010246 [ 9385.242755] RAX: 0000000000000000 RBX: ffffc0560ec7fc08 RCX: 0000000000000000 [ 9385.242759] RDX: ffffffffc0ad4550 RSI: ffffc0560ec7fc08 RDI: ffffa0fc66674000 [ 9385.242762] RBP: 00007ffd1fb2bf50 R08: b6a2d54b892363ee R09: ffffa101dc14fb00 [ 9385.242765] R10: 0000000000000000 R11: 0000000000000004 R12: ffffa0fc66674000 [ 9385.242768] R13: 0000000000000000 R14: ffffa0fc66674000 R15: 00000000ffffffa1 [ 9385.242771] FS: 00007f93711a2980(0000) GS:ffffa0fad72c0000(0000) knlGS:0000000000000000 [ 9385.242775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9385.242778] CR2: 0000000000000008 CR3: 0000000a8e61c003 CR4: 00000000003706e0 [ 9385.242781] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9385.242784] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9385.242787] Call Trace: [ 9385.242791] <TASK> [ 9385.242793] ethtool_get_settings+0x71/0x1a0 [ 9385.242814] __dev_ethtool+0x426/0x2f40 [ 9385.242823] ? slab_post_alloc_hook+0x4f/0x280 [ 9385.242836] ? kmem_cache_alloc_trace+0x15d/0x2f0 [ 9385.242841] ? dev_ethtool+0x59/0x170 [ 9385.242848] dev_ethtool+0xa7/0x170 [ 9385.242856] dev_ioctl+0xc3/0x520 [ 9385.242866] sock_do_ioctl+0xa0/0xe0 [ 9385.242877] sock_ioctl+0x22f/0x320 [ 9385.242885] __x64_sys_ioctl+0x84/0xc0 [ 9385.242896] do_syscall_64+0x3a/0x80 [ 9385.242904] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 9385.242918] RIP: 0033:0x7f93702396db [ 9385.242923] Code: 73 01 c3 48 8b 0d ad 57 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 57 38 00 f7 d8 64 89 01 48 [ 9385.242927] RSP: 002b:00007ffd1fb2bf18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 9385.242932] RAX: ffffffffffffffda RBX: 000055671b1d2fe0 RCX: 00007f93702396db [ 9385.242935] RDX: 00007ffd1fb2bf20 RSI: 0000000000008946 RDI: 0000000000000007 [ 9385.242937] RBP: 00007ffd1fb2bf20 R08: 0000000000000003 R09: 0030763066307330 [ 9385.242940] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd1fb2bf80 [ 9385.242942] R13: 0000000000000007 R14: 0000556719f6de90 R15: 00007ffd1fb2c1b0 [ 9385.242948] </TASK> [ 9385.242949] Modules linked in: iavf(E) xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_compat nf_nat_tftp nft_objref nf_conntrack_tftp bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink vfat fat irdma ib_uverbs ib_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretem ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sfc: fix kernel panic when creating VF When creating VFs a kernel panic can happen when calling to efx_ef10_try_update_nic_stats_vf. When releasing a DMA coherent buffer, sometimes, I don't know in what specific circumstances, it has to unmap memory with vunmap. It is disallowed to do that in IRQ context or with BH disabled. Otherwise, we hit this line in vunmap, causing the crash: BUG_ON(in_interrupt()); This patch reenables BH to release the buffer. Log messages when the bug is hit: kernel BUG at mm/vmalloc.c:2727! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:vunmap+0x2e/0x30 ...skip... Call Trace: __iommu_dma_free+0x96/0x100 efx_nic_free_buffer+0x2b/0x40 [sfc] efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc] efx_ef10_update_stats_vf+0x18/0x40 [sfc] efx_start_all+0x15e/0x1d0 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xe7/0x1a0 __dev_change_flags+0x1d7/0x240 dev_change_flags+0x21/0x60 ...skip...

In the Linux kernel, the following vulnerability has been resolved: pnode: terminate at peers of source The propagate_mnt() function handles mount propagation when creating mounts and propagates the source mount tree @source_mnt to all applicable nodes of the destination propagation mount tree headed by @dest_mnt. Unfortunately it contains a bug where it fails to terminate at peers of @source_mnt when looking up copies of the source mount that become masters for copies of the source mount tree mounted on top of slaves in the destination propagation tree causing a NULL dereference. Once the mechanics of the bug are understood it's easy to trigger. Because of unprivileged user namespaces it is available to unprivileged users. While fixing this bug we've gotten confused multiple times due to unclear terminology or missing concepts. So let's start this with some clarifications: * The terms "master" or "peer" denote a shared mount. A shared mount belongs to a peer group. * A peer group is a set of shared mounts that propagate to each other. They are identified by a peer group id. The peer group id is available in @shared_mnt->mnt_group_id. Shared mounts within the same peer group have the same peer group id. The peers in a peer group can be reached via @shared_mnt->mnt_share. * The terms "slave mount" or "dependent mount" denote a mount that receives propagation from a peer in a peer group. IOW, shared mounts may have slave mounts and slave mounts have shared mounts as their master. Slave mounts of a given peer in a peer group are listed on that peers slave list available at @shared_mnt->mnt_slave_list. * The term "master mount" denotes a mount in a peer group. IOW, it denotes a shared mount or a peer mount in a peer group. The term "master mount" - or "master" for short - is mostly used when talking in the context of slave mounts that receive propagation from a master mount. A master mount of a slave identifies the closest peer group a slave mount receives propagation from. The master mount of a slave can be identified via @slave_mount->mnt_master. Different slaves may point to different masters in the same peer group. * Multiple peers in a peer group can have non-empty ->mnt_slave_lists. Non-empty ->mnt_slave_lists of peers don't intersect. Consequently, to ensure all slave mounts of a peer group are visited the ->mnt_slave_lists of all peers in a peer group have to be walked. * Slave mounts point to a peer in the closest peer group they receive propagation from via @slave_mnt->mnt_master (see above). Together with these peers they form a propagation group (see below). The closest peer group can thus be identified through the peer group id @slave_mnt->mnt_master->mnt_group_id of the peer/master that a slave mount receives propagation from. * A shared-slave mount is a slave mount to a peer group pg1 while also a peer in another peer group pg2. IOW, a peer group may receive propagation from another peer group. If a peer group pg1 is a slave to another peer group pg2 then all peers in peer group pg1 point to the same peer in peer group pg2 via ->mnt_master. IOW, all peers in peer group pg1 appear on the same ->mnt_slave_list. IOW, they cannot be slaves to different peer groups. * A pure slave mount is a slave mount that is a slave to a peer group but is not a peer in another peer group. * A propagation group denotes the set of mounts consisting of a single peer group pg1 and all slave mounts and shared-slave mounts that point to a peer in that peer group via ->mnt_master. IOW, all slave mounts such that @slave_mnt->mnt_master->mnt_group_id is equal to @shared_mnt->mnt_group_id. The concept of a propagation group makes it easier to talk about a single propagation level in a propagation tree. For example, in propagate_mnt() the immediate peers of @dest_mnt and all slaves of @dest_mnt's peer group form a propagation group pr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data There is issue as follows when test f2fs atomic write: F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock F2FS-fs (loop0): invalid crc_offset: 0 F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=1, run fsck to fix. F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=2, run fsck to fix. ================================================================== BUG: KASAN: null-ptr-deref in f2fs_get_dnode_of_data+0xac/0x16d0 Read of size 8 at addr 0000000000000028 by task rep/1990 CPU: 4 PID: 1990 Comm: rep Not tainted 5.19.0-rc6-next-20220715 #266 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report.cold+0x49a/0x6bb kasan_report+0xa8/0x130 f2fs_get_dnode_of_data+0xac/0x16d0 f2fs_do_write_data_page+0x2a5/0x1030 move_data_page+0x3c5/0xdf0 do_garbage_collect+0x2015/0x36c0 f2fs_gc+0x554/0x1d30 f2fs_balance_fs+0x7f5/0xda0 f2fs_write_single_data_page+0xb66/0xdc0 f2fs_write_cache_pages+0x716/0x1420 f2fs_write_data_pages+0x84f/0x9a0 do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x87/0xa0 file_write_and_wait_range+0x157/0x1c0 f2fs_do_sync_file+0x206/0x12d0 f2fs_sync_file+0x99/0xc0 vfs_fsync_range+0x75/0x140 f2fs_file_write_iter+0xd7b/0x1850 vfs_write+0x645/0x780 ksys_write+0xf1/0x1e0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd As 3db1de0e582c commit changed atomic write way which new a cow_inode for atomic write file, and also mark cow_inode as FI_ATOMIC_FILE. When f2fs_do_write_data_page write cow_inode will use cow_inode's cow_inode which is NULL. Then will trigger null-ptr-deref. To solve above issue, introduce FI_COW_FILE flag for COW inode. Fiexes: 3db1de0e582c("f2fs: change the current atomic write way")

In the Linux kernel, the following vulnerability has been resolved: usb: xhci_plat_remove: avoid NULL dereference Since commit 4736ebd7fcaff1eb8481c140ba494962847d6e0a ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports") xhci->shared_hcd can be NULL, which causes the following Oops on reboot: [ 710.124450] systemd-shutdown[1]: Rebooting. [ 710.298861] xhci-hcd xhci-hcd.2.auto: remove, state 4 [ 710.304217] usb usb3: USB disconnect, device number 1 [ 710.317441] xhci-hcd xhci-hcd.2.auto: USB bus 3 deregistered [ 710.323280] xhci-hcd xhci-hcd.2.auto: remove, state 1 [ 710.328401] usb usb2: USB disconnect, device number 1 [ 710.333515] usb 2-3: USB disconnect, device number 2 [ 710.467649] xhci-hcd xhci-hcd.2.auto: USB bus 2 deregistered [ 710.475450] Unable to handle kernel NULL pointer dereference at virtual address 00000000000003b8 [ 710.484425] Mem abort info: [ 710.487265] ESR = 0x0000000096000004 [ 710.491060] EC = 0x25: DABT (current EL), IL = 32 bits [ 710.496427] SET = 0, FnV = 0 [ 710.499525] EA = 0, S1PTW = 0 [ 710.502716] FSC = 0x04: level 0 translation fault [ 710.507648] Data abort info: [ 710.510577] ISV = 0, ISS = 0x00000004 [ 710.514462] CM = 0, WnR = 0 [ 710.517480] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b0050000 [ 710.523976] [00000000000003b8] pgd=0000000000000000, p4d=0000000000000000 [ 710.530961] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 710.536551] Modules linked in: rfkill input_leds snd_soc_simple_card snd_soc_simple_card_utils snd_soc_nau8822 designware_i2s snd_soc_core dw_hdmi_ahb_audio snd_pcm_dmaengine arm_ccn panfrost ac97_bus gpu_sched snd_pcm at24 fuse configfs sdhci_of_dwcmshc sdhci_pltfm sdhci nvme led_class mmc_core nvme_core bt1_pvt polynomial tp_serio snd_seq_midi snd_seq_midi_event snd_seq snd_timer snd_rawmidi snd_seq_device snd soundcore efivarfs ipv6 [ 710.575286] CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 5.19.0-rc7-00043-gfd8619f4fd54 #1 [ 710.583822] Hardware name: T-Platforms TF307-MB/BM1BM1-A, BIOS 5.6 07/06/2022 [ 710.590972] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 710.597949] pc : usb_remove_hcd+0x34/0x1e4 [ 710.602067] lr : xhci_plat_remove+0x74/0x140 [ 710.606351] sp : ffff800009f3b7c0 [ 710.609674] x29: ffff800009f3b7c0 x28: ffff000800960040 x27: 0000000000000000 [ 710.616833] x26: ffff800008dc22a0 x25: 0000000000000000 x24: 0000000000000000 [ 710.623992] x23: 0000000000000000 x22: ffff000805465810 x21: ffff000805465800 [ 710.631149] x20: ffff000800f80000 x19: 0000000000000000 x18: ffffffffffffffff [ 710.638307] x17: ffff000805096000 x16: ffff00080633b800 x15: ffff000806537a1c [ 710.645465] x14: 0000000000000001 x13: 0000000000000000 x12: ffff00080378d6f0 [ 710.652621] x11: ffff00080041a900 x10: ffff800009b204e8 x9 : ffff8000088abaa4 [ 710.659779] x8 : ffff000800960040 x7 : ffff800009409000 x6 : 0000000000000001 [ 710.666936] x5 : ffff800009241000 x4 : ffff800009241440 x3 : 0000000000000000 [ 710.674094] x2 : ffff000800960040 x1 : ffff000800960040 x0 : 0000000000000000 [ 710.681251] Call trace: [ 710.683704] usb_remove_hcd+0x34/0x1e4 [ 710.687467] xhci_plat_remove+0x74/0x140 [ 710.691400] platform_remove+0x34/0x70 [ 710.695165] device_remove+0x54/0x90 [ 710.698753] device_release_driver_internal+0x200/0x270 [ 710.703992] device_release_driver+0x24/0x30 [ 710.708273] bus_remove_device+0xe0/0x16c [ 710.712293] device_del+0x178/0x390 [ 710.715797] platform_device_del.part.0+0x24/0x90 [ 710.720514] platform_device_unregister+0x30/0x50 [ 710.725232] dwc3_host_exit+0x20/0x30 [ 710.728907] dwc3_remove+0x174/0x1b0 [ 710.732494] platform_remove+0x34/0x70 [ 710.736254] device_remove+0x54/0x90 [ 710.739840] device_release_driver_internal+0x200/0x270 [ 710.745078] device_release_driver+0x24/0x30 [ 710.749359] bus_remove_device+0xe0/0x16c [ 710.753380] device_del+0x178/0x390 [ 710.756881] platform_device_del.part ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes drm_cvt_mode may return NULL and we should check it. This bug is found by syzkaller: FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218 KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rx_register() It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable() If 'ep' is NULL, result of ep_to_cdns3_ep(ep) is invalid pointer and its dereference with priv_ep->cdns3_dev may cause panic. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix null pointer dereference in remove if xHC has only one roothub The remove path in xhci platform driver tries to remove and put both main and shared hcds even if only a main hcd exists (one roothub) This causes a null pointer dereference in reboot for those controllers. Check that the shared_hcd exists before trying to remove it.

In the Linux kernel, the following vulnerability has been resolved: afs: Fix dynamic root getattr The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:afs_getattr+0x8b/0x14b ... Call Trace: <TASK> vfs_statx+0x79/0xf5 vfs_fstatat+0x49/0x62

In the Linux kernel, the following vulnerability has been resolved: mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.