A vulnerability in the logging component of Cisco Duo Authentication Proxy could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. This vulnerability exists because certain unencrypted credentials are stored. An attacker could exploit this vulnerability by accessing the logs on an affected system and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to view sensitive information in clear text.

Insertion of Sensitive Information into Log File vulnerability in the Apache Solr Operator. This issue affects all versions of the Apache Solr Operator from 0.3.0 through 0.8.0. When asked to bootstrap Solr security, the operator will enable basic authentication and create several accounts for accessing Solr: including the "solr" and "admin" accounts for use by end-users, and a "k8s-oper" account which the operator uses for its own requests to Solr. One common source of these operator requests is healthchecks: liveness, readiness, and startup probes are all used to determine Solr's health and ability to receive traffic. By default, the operator configures the Solr APIs used for these probes to be exempt from authentication, but users may specifically request that authentication be required on probe endpoints as well. Whenever one of these probes would fail, if authentication was in use, the Solr Operator would create a Kubernetes "event" containing the username and password of the "k8s-oper" account. Within the affected version range, this vulnerability affects any solrcloud resource which (1) bootstrapped security through use of the `.solrOptions.security.authenticationType=basic` option, and (2) required authentication be used on probes by setting `.solrOptions.security.probesRequireAuth=true`. Users are recommended to upgrade to Solr Operator version 0.8.1, which fixes this issue by ensuring that probes no longer print the credentials used for Solr requests.  Users may also mitigate the vulnerability by disabling authentication on their healthcheck probes using the setting `.solrOptions.security.probesRequireAuth=false`.

Potential Insertion of Sensitive Information into Jetty Log Files in multiple versions of OpenNMS Meridian and Horizon could allow disclosure of usernames and passwords if the logging level is set to debug. Users should upgrade to Meridian 2023.1.0 or newer, or Horizon 31.0.4. Meridian and Horizon installation instructions state that they are intended for installation within an organization's private networks and should not be directly accessible from the Internet.

Insertion of sensitive information into log file vulnerability in proxy settings component in Synology Drive Client before 3.3.0-15082 allows remote authenticated users to obtain sensitive information via unspecified vectors.

Brocade Fabric OS versions before Brocade Fabric OS v7.4.2g could allow an authenticated, remote attacker to view a user password in cleartext. The vulnerability is due to incorrectly logging the user password in log files.

In Octopus Deploy 2018.8.0 through 2019.x before 2019.12.2, an authenticated user with could trigger a deployment that leaks the Helm Chart repository password.

In JetBrains TeamCity version before 2022.10, Password parameters could be exposed in the build log if they contained special characters

An insertion of sensitive information into log file vulnerability exists in PcVue versions 15 through 15.2.2. This could allow a user with access to the log files to discover connection strings of data sources configured for the DbConnect, which could include credentials. Successful exploitation of this vulnerability could allow other users unauthorized access to the underlying data sources.

Multiple Exposure of sensitive information to an unauthorized actor vulnerabilities [CWE-200] in FortiAIOps version 2.0.0 may allow an authenticated, remote attacker to retrieve sensitive information from the API endpoint or log files.

IBM Spectrum Virtualize 8.3, 8.4, and 8.5 could disclose SNMPv3 server credentials to an authenticated user in log files. IBM X-Force ID: 239540.

Jenkins MQ Notifier Plugin 1.4.0 and earlier logs potentially sensitive build parameters as part of debug information in build logs by default.

An insertion of sensitive information into log file vulnerability [CWE-532] in the FortiPortal management interface 7.0.0 through 7.0.2 may allow a remote authenticated attacker to read other devices' passwords in the audit log page.

Hitachi Vantara Pentaho Business Analytics Server versions before 9.4.0.0 and 9.3.0.1, including 8.3.x with the Big Data Plugin expose the username and password of clusters in clear text into system logs. 

IBM InfoSphere Information Server 11.7 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 280361.

In JetBrains TeamCity before 2022.04.2 the private SSH key could be written to the build log in some cases

An authenticated attacker could utilize the identical agent and cluster node linking keys to potentially allow for a scenario where unauthorized disclosure of agent logs and data is present.

In affected versions of the Octopus Kubernetes worker or agent, sensitive variables could be written to the Kubernetes script pod log in clear-text. This was identified in Version 2 however it was determined that this could also be achieved in Version 1 and the fix was applied to both versions accordingly.

TYPO3 is an open source web content management system. Prior to versions 7.6.57 ELTS, 8.7.47 ELTS, 9.5.34 ELTS, 10.4.29, and 11.5.11, system internal credentials or keys (e.g. database credentials) can be logged as plaintext in exception handlers, when logging the complete exception stack trace. TYPO3 versions 7.6.57 ELTS, 8.7.47 ELTS, 9.5.34 ELTS, 10.4.29, 11.5.11 contain a fix for the problem.

An information disclosure vulnerability exists in Yugabyte Anywhere, where the LDAP bind password is logged in plaintext within application logs. This flaw results in the unintentional exposure of sensitive information in Yugabyte Anywhere logs, potentially allowing unauthorized users with access to these logs to view the LDAP bind password. An attacker with log access could exploit this vulnerability to gain unauthorized access to the LDAP server, leading to potential exposure or compromise of LDAP-managed resources This issue affects YugabyteDB Anywhere: from 2.20.0.0 before 2.20.7.0, from 2.23.0.0 before 2.23.1.0, from 2024.1.0.0 before 2024.1.3.0.

Vault and Vault Enterprise (“Vault”) may expose sensitive information when enabling an audit device which specifies the `log_raw` option, which may log sensitive information to other audit devices, regardless of whether they are configured to use `log_raw`.

An insertion of sensitive information into the log file in the audit log in GitHub Enterprise Server was identified that could allow an attacker to gain access to the management console. To exploit this, an attacker would need access to the log files for the GitHub Enterprise Server appliance, a backup archive created with GitHub Enterprise Server Backup Utilities, or a service which received streamed logs. This vulnerability affected all versions of GitHub Enterprise Server since 3.8 and was fixed in version 3.8.12, 3.9.7, 3.10.4, and 3.11.1. 

Since version 5.2.0, when using deferrable mode with the path of a Kubernetes configuration file for authentication, the Airflow worker serializes this configuration file as a dictionary and sends it to the triggerer by storing it in metadata without any encryption. Additionally, if used with an Airflow version between 2.3.0 and 2.6.0, the configuration dictionary will be logged as plain text in the triggerer service without masking. This allows anyone with access to the metadata or triggerer log to obtain the configuration file and use it to access the Kubernetes cluster. This behavior was changed in version 7.0.0, which stopped serializing the file contents and started providing the file path instead to read the contents into the trigger. Users are recommended to upgrade to version 7.0.0, which fixes this issue.

A vulnerability has been identified in Climatix POL909 (AWB module) (All versions < V11.44), Climatix POL909 (AWM module) (All versions < V11.36). The handling of log files in the web application of affected devices contains an information disclosure vulnerability which could allow logged in users to access sensitive files.

TYPO3 is an open source PHP based web content management system. In versions 9.0.0 through 9.5.27, 10.0.0 through 10.4.17, and 11.0.0 through 11.3.0, user credentials may been logged as plain-text. This occurs when explicitly using log level debug, which is not the default configuration. TYPO3 versions 9.5.28, 10.4.18, 11.3.1 contain a patch for this vulnerability.

Laf is a cloud development platform. In the Laf version design, the log uses communication with k8s to quickly retrieve logs from the container without the need for additional storage. However, in version 1.0.0-beta.13 and prior, this interface does not verify the permissions of the pod, which allows authenticated users to obtain any pod logs under the same namespace through this method, thereby obtaining sensitive information printed in the logs. As of time of publication, no known patched versions exist.

CodeIgniter Shield is an authentication and authorization provider for CodeIgniter 4. In affected versions successful login attempts are recorded with the raw tokens stored in the log table. If a malicious person somehow views the data in the log table they can obtain a raw token which can then be used to send a request with that user's authority. This issue has been addressed in version 1.0.0-beta.8. Users are advised to upgrade. Users unable to upgrade should disable logging for successful login attempts by the configuration files.

On F5 BIG-IP 15.1.x versions prior to 15.1.5.1 and 14.1.x versions prior to 14.1.4.6, when installing Net HSM, the scripts (nethsm-safenet-install.sh and nethsm-thales-install.sh) expose the Net HSM partition password. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

An information disclosure vulnerability in B&R GateManager 4260 and 9250 versions <9.0.20262 and GateManager 8250 versions <9.2.620236042 allows authenticated users to view information of devices belonging to foreign domains.

CubeFS is an open-source cloud-native file storage system. CubeFS prior to version 3.3.1 was found to leak users secret keys and access keys in the logs in multiple components. When CubeCS creates new users, it leaks the users secret key. This could allow a lower-privileged user with access to the logs to retrieve sensitive information and impersonate other users with higher privileges than themselves. The issue has been patched in v3.3.1. There is no other mitigation than upgrading CubeFS.

Cloud Foundry UAA Release, versions prior to v74.10.0, when set to logging level DEBUG, logs client_secret credentials when sent as a query parameter. A remote authenticated malicious user could gain access to user credentials via the uaa.log file if authentication is provided via query parameters.

In versions of Greenplum database prior to 5.28.14 and 6.17.0, certain statements execution led to the storage of sensitive(credential) information in the logs of the database. A malicious user with access to logs can read sensitive(credentials) information about users

All versions of Apache Santuario - XML Security for Java prior to 2.2.6, 2.3.4, and 3.0.3, when using the JSR 105 API, are vulnerable to an issue where a private key may be disclosed in log files when generating an XML Signature and logging with debug level is enabled. Users are recommended to upgrade to version 2.2.6, 2.3.4, or 3.0.3, which fixes this issue.

CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.864 allows an attacker to get a victim's session file name from /home/[USERNAME]/tmp/session/sess_xxxxxx, and the victim's token value from /usr/local/cwpsrv/logs/access_log, then use them to gain access to the victim's password (for the OS and phpMyAdmin) via an attacker account. This is different from CVE-2019-14782.

Azure SDK for .NET Information Disclosure Vulnerability

Cloud Foundry Cloud Controller (CAPI), versions prior to 1.91.0, logs properties of background jobs when they are run, which may include sensitive information such as credentials if provided to the job. A malicious user with access to those logs may gain unauthorized access to resources protected by such credentials.

Dell EMC OpenManage Integration for Microsoft System Center (OMIMSSC) for SCCM and SCVMM versions prior to 7.2.1 contain an information disclosure vulnerability. Authenticated low privileged OMIMSCC users may be able to retrieve sensitive information from the logs.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 discloses highly sensitive information in plain text in the virgo log file which could be used in further attacks against the system. IBM X-Force ID: 181779.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.2 and 5.2.0.0 through 5.2.6.5 stores potentially sensitive information in log files that could be read by an authenticatedl user. IBM X-Force ID: 186284.

A vulnerability in the CLI of Cisco AsyncOS for Cisco Email Security Appliance (ESA) and Cisco AsyncOS for Cisco Content Security Management Appliance (SMA) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to excessive verbosity in certain log subscriptions. An attacker could exploit this vulnerability by accessing specific log files on an affected device. A successful exploit could allow the attacker to obtain sensitive log data, which may include user credentials. To exploit this vulnerability, the attacker would need to have valid credentials at the operator level or higher on the affected device.

Dell OpenManage Enterprise, versions 3.10, 4.0, 4.1, and 4.2, contains an Insertion of Sensitive Information into Log File vulnerability in the Backup and Restore. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information exposure.

Plaintext Password vulnerability in AddAdmin.py in cms-dev/cms v1.4.rc1, allows attackers to gain sensitive information via audit logs.

Apache Pulsar contains multiple connectors for integrating with Apache Kafka. The Pulsar IO Apache Kafka Source Connector, Sink Connector, and Kafka Connect Adaptor Sink Connector log sensitive configuration properties in plain text in application logs. This vulnerability can lead to unintended exposure of credentials in log files, potentially allowing attackers with access to these logs to obtain Apache Kafka credentials. The vulnerability's impact is limited by the fact that an attacker would need access to the application logs to exploit this issue. This issue affects Apache Pulsar IO's Apache Kafka connectors in all versions before 3.0.11, 3.3.6, and 4.0.4. 3.0.x version users should upgrade to at least 3.0.11. 3.3.x version users should upgrade to at least 3.3.6. 4.0.x version users should upgrade to at least 4.0.4. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

On BIG-IP 13.1.0-13.1.1.4, sensitive information is logged into the local log files and/or remote logging targets when restjavad processes an invalid request. Users with access to the log files would be able to view that data.

IBM Cloud Pak System 2.3.3.0, 2.3.3.3, 2.3.3.3 iFix1, 2.3.3.4, 2.3.3.5, 2.3.3.6, 2.3.3.6 iFix1, 2.3.3.6 iFix2, 2.3.3.7, and 2.3.3.7 iFix1 could allow an authenticated user to obtain sensitive information from log files.

Insertion of Sensitive Information into Log File vulnerability in Apache ActiveMQ Artemis. All the values of the broker properties are logged when the org.apache.activemq.artemis.core.config.impl.ConfigurationImpl logger has the debug level enabled. This issue affects Apache ActiveMQ Artemis: from 1.5.1 before 2.40.0. It can be mitigated by restricting log access to only trusted users. Users are recommended to upgrade to version 2.40.0, which fixes the issue.

Information Disclosure vulnerability in McAfee Advanced Threat Defense (ATD) prior to 4.8 allows remote authenticated attackers to gain access to hashed credentials via carefully constructed POST request extracting incorrectly recorded data from log files.

Couchbase Server 6.6.x through 7.x before 7.0.4 exposes Sensitive Information to an Unauthorized Actor.

In JetBrains TeamCity before 2023.05.1 build parameters of the "password" type could be written to the agent log

In JetBrains TeamCity before 2023.05.1 build chain parameters of the "password" type could be written to the agent log

A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to view a password in clear text. The vulnerability is due to incorrectly logging the admin password when a user is forced to modify the default password when logging in to the web portal for the first time. Subsequent password changes are not logged and other accounts are not affected. An attacker could exploit this vulnerability by viewing the admin clear text password and using it to access the affected system. The attacker would need a valid user account to exploit this vulnerability.