I-O DATA DEVICE TS-WRLP firmware version 1.01.02 and earlier and TS-WRLA firmware version 1.01.02 and earlier allows an attacker with administrator rights to execute arbitrary OS commands via unspecified vectors.

UD-LT1 firmware Ver.2.1.9 and earlier and UD-LT1/EX firmware Ver.2.1.9 and earlier allow a remote authenticated attacker with an administrative account to execute arbitrary OS commands.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If an attacker logs in to the affected product with an administrative account and manipulates requests for a certain screen operation, an arbitrary OS command may be executed. This vulnerability was reported on a different screen operation from CVE-2025-26856.

WN-G300R3 firmware 1.03 and earlier allows attackers with administrator rights to execute arbitrary OS commands via unspecified vectors.

Buffer overflow in I-O DATA DEVICE TS-WRLP firmware version 1.01.02 and earlier and TS-WRLA firmware version 1.01.02 and earlier allows an attacker with administrator rights to cause a denial-of-service (DoS) or execute arbitrary code via unspecified vectors.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If a user logs in to CLI of the affected product, an arbitrary OS command may be executed.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in I-O DATA network attached hard disk 'HDL-T Series' firmware Ver.1.21 and earlier when 'Remote Link3 function' is enabled. If exploited, a remote unauthenticated attacker may execute an arbitrary OS command.

I-O DATA DEVICE WFS-SR01 firmware version 1.10 and earlier allow remote attackers to execute arbitrary OS commands via unspecified vectors.

Devices with IP address setting tool "MagicalFinder" provided by I-O DATA DEVICE, INC. allow authenticated attackers to execute arbitrary OS commands via unspecified vectors.

TS-WPTCAM firmware version 1.18 and earlier, TS-WPTCAM2 firmware version 1.00, TS-WLCE firmware version 1.18 and earlier, TS-WLC2 firmware version 1.18 and earlier, TS-WRLC firmware version 1.17 and earlier, TS-PTCAM firmware version 1.18 and earlier, TS-PTCAM/POE firmware version 1.18 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

WN-AX1167GR firmware version 3.00 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. An attacker would need to have valid administrator credentials on the device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker with elevated privileges could exploit this vulnerability by sending crafted commands to the administrative web management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative privileges on the DCNM application to inject arbitrary commands on the underlying operating system (OS). For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.

A vulnerability in the Intelligent Platform Management Interface (IPMI) of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of user-supplied commands. An attacker who has administrator privileges and access to the network where the IPMI resides could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to gain root privileges on the affected device.

A command injection (missing input validation) issue in the IP address field for the logging server in the configuration web interface on the Akuvox R50P VoIP phone with firmware 50.0.6.156 allows an authenticated remote attacker in the same network to trigger OS commands via shell metacharacters in a POST request.

An OS Command Injection vulnerability in Snare Central before 7.4.5 allows remote authenticated attackers to inject arbitrary OS commands via the ServerConf/DataManagement/DiskManager.php FORMNAS_share parameter.

An issue was discovered in Liferay Portal CE 7.1.2 GA3. An attacker can use Liferay's Groovy script console to execute OS commands. Commands can be executed via a [command].execute() call, as demonstrated by "def cmd =" in the ServerAdminPortlet_script value to group/control_panel/manage. Valid credentials for an application administrator user account are required. NOTE: The developer disputes this as a vulnerability since it is a feature for administrators to run groovy scripts and therefore not a design flaw

A vulnerability was found in TRENDnet TEW-800MB 1.0.1.0 and classified as critical. Affected by this issue is some unknown functionality of the component POST Request Handler. The manipulation of the argument DeviceURL leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-252122 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

app/backup/index.php in the Backup Module in FusionPBX 4.4.3 suffers from a command injection vulnerability due to a lack of input validation, which allows authenticated administrative attackers to execute commands on the host.

ABAP Tests Modules (SAP Basis, versions 7.0, 7.1, 7.3, 7.31, 7.4, 7.5) of SAP NetWeaver Process Integration enables an attacker the execution of OS commands with privileged rights. An attacker could thereby impact the integrity and availability of the system.

IBM Security Guardium 11.2 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 199184.

The ImageMagick plugin that is installed by default in Pydio through 8.2.2 does not perform the appropriate validation and sanitization of user supplied input in the plugin's configuration options, allowing arbitrary shell commands to be entered that result in command execution on the underlying operating system, with the privileges of the local user running the web server. The attacker must be authenticated into the application with an administrator user account in order to be able to edit the affected plugin configuration.

Zen Load Balancer 3.10.1 allows remote authenticated admin users to execute arbitrary commands as root via shell metacharacters in the index.cgi?action=View_Cert certname parameter.

In some Lenovo ThinkServer-branded servers, a command injection vulnerability exists in the BMC firmware download command. This allows a privileged user to download and execute arbitrary code inside the BMC. This can only be exploited by authorized privileged users.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4.1, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 and BIG-IQ 7.0.0-7.1.0.2, 6.0.0-6.1.0, and 5.1.0-5.4.0, an undisclosed iControl REST worker is vulnerable to command injection by an admin/resource admin user. This issue impacts both iControl REST and tmsh implementations.

Multiple products provided by iND Co.,Ltd contain an OS command injection vulnerability. If exploited, an arbitrary OS command may be executed and sensitive information may be obtained. As for the details of affected product names and versions, refer to the information under [Product Status].

The web management console of Opsview Monitor 5.4.x before 5.4.2 provides functionality accessible by an authenticated administrator to test notifications that are triggered under certain configurable events. The value parameter is not properly sanitized, leading to arbitrary command injection with the privileges of the nagios user account.

A vulnerability, which was classified as critical, has been found in Poly Trio 8300, Trio 8500, Trio 8800, Trio C60, CCX 350, CCX 400, CCX 500, CCX 505, CCX 600, CCX 700, EDGE E100, EDGE E220, EDGE E300, EDGE E320, EDGE E350, EDGE E400, EDGE E450, EDGE E500, EDGE E550, VVX 101, VVX 150, VVX 201, VVX 250, VVX 300, VVX 301, VVX 310, VVX 311, VVX 350, VVX 400, VVX 401, VVX 410, VVX 411, VVX 450, VVX 500, VVX 501, VVX 600 and VVX 601. This issue affects some unknown processing of the component Diagnostic Telnet Mode. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. The identifier VDB-249257 was assigned to this vulnerability.

Arista NG Firewall ExecManagerImpl Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Arista NG Firewall. Authentication is required to exploit this vulnerability. The specific flaw exists within the ExecManagerImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24015.

Arbitrary code execution vulnerability in Kentico 9 through 11 allows remote authenticated users to execute arbitrary operating system commands in a dynamic .NET code evaluation context via C# code in a "Pages -> Edit -> Template -> Edit template properties -> Layout" box. NOTE: the vendor has responded that there is intended functionality for authorized users to edit and update ascx code layout

CouchDB administrative users can configure the database server via HTTP(S). Some of the configuration options include paths for operating system-level binaries that are subsequently launched by CouchDB. This allows an admin user in Apache CouchDB before 1.7.0 and 2.x before 2.1.1 to execute arbitrary shell commands as the CouchDB user, including downloading and executing scripts from the public internet.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.

On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, OS command injection is possible as a result of incorrect processing of the res_buf parameter to index.cgi.

BEC Technologies Multiple Routers sys ping Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of BEC Technologies Multiple Routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the management interface, which listens on TCP port 22 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-25903.

The setSystemTime function in Foscam Cameras C1 Lite V3, and C1 V3 with firmware 2.82.2.33 and earlier, FI9800P V3, FI9803P V4, FI9851P V3, and FI9853EP V2 2.84.2.33 and earlier, FI9816P V3, FI9821EP V2, FI9821P V3, FI9826P V3, and FI9831P V3 2.81.2.33 and earlier, C1, C1 V2, C1 Lite, and C1 Lite V2 2.52.2.47 and earlier, FI9800P, FI9800P V2, FI9803P V2, FI9803P V3, and FI9851P V2 2.54.2.47 and earlier, FI9815P, FI9815P V2, FI9816P, and FI9816P V2, 2.51.2.47 and earlier, R2 and R4 2.71.1.59 and earlier, C2 and FI9961EP 2.72.1.59 and earlier, FI9900EP, FI9900P, and FI9901EP 2.74.1.59 and earlier, FI9928P 2.74.1.58 and earlier, FI9803EP and FI9853EP 2.22.2.31 and earlier, FI9803P and FI9851P 2.24.2.31 and earlier, FI9821P V2, FI9826P V2, FI9831P V2, and FI9821EP 2.21.2.31 and earlier, FI9821W V2, FI9831W, FI9826W, FI9821P, FI9831P, and FI9826P 2.11.1.120 and earlier, FI9818W V2 2.13.2.120 and earlier, FI9805W, FI9804W, FI9804P, FI9805E, and FI9805P 2.14.1.120 and earlier, FI9828P, and FI9828W 2.13.1.120 and earlier, and FI9828P V2 2.11.1.133 and earlier allows remote authenticated users to execute arbitrary commands via a ';' in the ntpServer argument. NOTE: this issue exists because of an incomplete fix for CVE-2017-2849.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Ubiquiti EdgeOS 1.9.1 on EdgeRouter Lite devices allows remote attackers to execute arbitrary code with admin credentials, because /opt/vyatta/share/vyatta-cfg/templates/system/static-host-mapping/host-name/node.def does not sanitize the 'alias' or 'ips' parameter for shell metacharacters.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in +F FS010M versions prior to V2.0.0_1101. If this vulnerability is exploited, an arbitrary OS command may be executed by a remote authenticated attacker with an administrative privilege.

A vulnerability was found in Tecno 4G Portable WiFi TR118 TR118-M30E-RR-D-EnFrArSwHaPo-OP-V008-20220830. It has been declared as critical. This vulnerability affects unknown code of the file /goform/goform_get_cmd_process of the component Ping Tool. The manipulation of the argument url leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-246130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Tenda AC8, AC10 and AC18 16.03.10.20. Affected by this issue is some unknown functionality of the file /goform/telnet of the component HTTP Request Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been identified in SCALANCE M875 (All versions). An authenticated remote attacker with access to the web interface (443/tcp), could execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the web interface. The attacker must be authenticated as administrative user to exploit the security vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_normal_mode` parameter.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. They allow remote attackers to execute arbitrary OS commands via shell metacharacters in the usrName parameter of a CGIProxy.fcgi addAccount action.

TRENDnet TEW-673GRU v1.00b40 devices have an OS command injection vulnerability in the start_arpping function of the timer binary, which allows remote attackers to execute arbitrary commands via three parameters (dhcpd_start, dhcpd_end, and lan_ipaddr) passed to the apply.cgi binary through a POST request.

The Port Forwarding functionality on DASAN H660GW devices allows remote attackers to execute arbitrary code via shell metacharacters in the cgi-bin/adv_nat_virsvr.asp Addr parameter (aka the Local IP Address field).