A vulnerability in the web-based management interface of Cisco Nexus Dashboard and Cisco Nexus Dashboard hosted services could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. This vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected system. An attacker could exploit this vulnerability by persuading a user to click a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user. If the affected user has administrative privileges, these actions could include modifying the system configuration and creating new privileged accounts. Note: There are internal security mechanisms in place that limit the scope of this exploit, reducing the Security Impact Rating of this vulnerability.

A vulnerability in the SSH server of Cisco Catalyst Center, formerly Cisco DNA Center, could allow an unauthenticated, remote attacker to impersonate a Cisco Catalyst Center appliance. This vulnerability is due to the presence of a static SSH host key. An attacker could exploit this vulnerability by performing a machine-in-the-middle attack on SSH connections, which could allow the attacker to intercept traffic between SSH clients and a Cisco Catalyst Center appliance. A successful exploit could allow the attacker to impersonate the affected appliance, inject commands into the terminal session, and steal valid user credentials.

A vulnerability in the Cisco Adaptive Security Device Manager (ASDM) Launcher could allow an unauthenticated, remote attacker to execute arbitrary code on a user's operating system. This vulnerability is due to a lack of proper signature verification for specific code exchanged between the ASDM and the Launcher. An attacker could exploit this vulnerability by leveraging a man-in-the-middle position on the network to intercept the traffic between the Launcher and the ASDM and then inject arbitrary code. A successful exploit could allow the attacker to execute arbitrary code on the user's operating system with the level of privileges assigned to the ASDM Launcher. A successful exploit may require the attacker to perform a social engineering attack to persuade the user to initiate communication from the Launcher to the ASDM.

A vulnerability in the REST API of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to perform a command injection attack and elevate privileges to root. This vulnerability is due to insufficient input validation for specific API endpoints. An attacker in a man-in-the-middle position could exploit this vulnerability by intercepting and modifying specific internode communications from one ISE persona to another ISE persona. A successful exploit could allow the attacker to run arbitrary commands with root privileges on the underlying operating system. To exploit this vulnerability, the attacker would need to decrypt HTTPS traffic between two ISE personas that are located on separate nodes.

A vulnerability in the key-based SSH authentication mechanism of Cisco Umbrella Virtual Appliance (VA) could allow an unauthenticated, remote attacker to impersonate a VA. This vulnerability is due to the presence of a static SSH host key. An attacker could exploit this vulnerability by performing a man-in-the-middle attack on an SSH connection to the Umbrella VA. A successful exploit could allow the attacker to learn the administrator credentials, change configurations, or reload the VA. Note: SSH is not enabled by default on the Umbrella VA.

A vulnerability in Cisco Webex Meetings Desktop App could allow an unauthenticated, remote attacker to execute programs on an affected end-user system. The vulnerability is due to improper validation of input that is supplied to application URLs. The attacker could exploit this vulnerability by persuading a user to follow a malicious URL. A successful exploit could allow the attacker to cause the application to execute other programs that are already present on the end-user system. If malicious files are planted on the system or on an accessible network file path, the attacker could execute arbitrary code on the affected system.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of requests that are sent to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary code with root privileges on an affected device. To exploit this vulnerability, the attacker must have valid Administrator credentials on the affected device.

A vulnerability in the IPv6 DHCP (DHCPv6) client module of Cisco Adaptive Security Appliance (ASA) Software, Cisco Firepower Threat Defense (FTD) Software, Cisco IOS Software, and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of DHCPv6 messages. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: To successfully exploit this vulnerability, the attacker would need to either control the DHCPv6 server or be in a man-in-the-middle position.

Multiple vulnerabilities in the web-based management interface of certain Cisco IP Phones could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Meraki onboarding feature of Cisco IOS XE Software could allow an authenticated, local attacker to gain root level privileges on an affected device. This vulnerability is due to insufficient memory protection in the Meraki onboarding feature of an affected device. An attacker could exploit this vulnerability by modifying the Meraki registration parameters. A successful exploit could allow the attacker to elevate privileges to root.

Multiple vulnerabilities in the web-based management interface of certain Cisco IP Phones could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

On Feb 15, 2023, the following vulnerability in the ClamAV scanning library was disclosed: A vulnerability in the HFS+ partition file parser of ClamAV versions 1.0.0 and earlier, 0.105.1 and earlier, and 0.103.7 and earlier could allow an unauthenticated, remote attacker to execute arbitrary code. This vulnerability is due to a missing buffer size check that may result in a heap buffer overflow write. An attacker could exploit this vulnerability by submitting a crafted HFS+ partition file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the ClamAV scanning process, or else crash the process, resulting in a denial of service (DoS) condition. For a description of this vulnerability, see the ClamAV blog ["https://blog.clamav.net/"].

A vulnerability in the CDP processing feature of Cisco ISE could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of the CDP process on an affected device. This vulnerability is due to insufficient bounds checking when an affected device processes CDP traffic. An attacker could exploit this vulnerability by sending crafted CDP traffic to the device. A successful exploit could cause the CDP process to crash, impacting neighbor discovery and the ability of Cisco ISE to determine the reachability of remote devices. After a crash, the CDP process must be manually restarted using the cdp enable command in interface configuration mode.

A vulnerability in the Cisco Group Encrypted Transport VPN (GET VPN) feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker who has administrative control of either a group member or a key server to execute arbitrary code on an affected device or cause the device to crash. This vulnerability is due to insufficient validation of attributes in the Group Domain of Interpretation (GDOI) and G-IKEv2 protocols of the GET VPN feature. An attacker could exploit this vulnerability by either compromising an installed key server or modifying the configuration of a group member to point to a key server that is controlled by the attacker. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a denial of service (DoS) condition. For more information, see the Details ["#details"] section of this advisory.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to cause an unexpected reload of an affected device, resulting in a denial of service (DoS) condition. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user input that is in incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to cause an unexpected reload of an affected device, resulting in a denial of service (DoS) condition. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user input that is in incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to execute arbitrary code as the root user. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to cause an unexpected reload of an affected device, resulting in a denial of service (DoS) condition. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user input that is in incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to execute arbitrary code as the root user. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to cause an unexpected reload of an affected device, resulting in a denial of service (DoS) condition. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user input that is in incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to cause an unexpected reload of an affected device, resulting in a denial of service (DoS) condition. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user input that is in incoming HTTP packets. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

Multiple vulnerabilities in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. These vulnerabilities are due to insufficient validation of client-supplied parameters while establishing an SSL VPN session. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to restart, resulting in the failure of the established SSL VPN connections and forcing remote users to initiate a new VPN connection and reauthenticate. A sustained attack could prevent new SSL VPN connections from being established. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to execute arbitrary code as the root user. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user.

A vulnerability in Cisco Unified Threat Defense (UTD) Snort Intrusion Prevention System (IPS) Engine for Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass configured security policies or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of HTTP requests when they are processed by Cisco UTD Snort IPS Engine. An attacker could exploit this vulnerability by sending a crafted HTTP request through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process. If the action in case of Cisco UTD Snort IPS Engine failure is set to the default, fail-open, successful exploitation of this vulnerability could allow the attacker to bypass configured security policies. If the action in case of Cisco UTD Snort IPS Engine failure is set to fail-close, successful exploitation of this vulnerability could cause traffic that is configured to be inspected by Cisco UTD Snort IPS Engine to be dropped.

A vulnerability in the web-based management interface of Cisco Small Business RV042, RV042G, RV320, and RV325 Routers could allow an authenticated, Administrator-level, remote attacker to execute arbitrary code as the root user. To exploit this vulnerability, an attacker would need to have valid Administrator credentials on the affected device.   This vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user.

A vulnerability in the web-based management interface of Cisco IP Phone firmware could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a DoS condition. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to cause the affected device to reload.

A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a crafted IPv4 DHCP request packet being mishandled when endpoint analytics are enabled. An attacker could exploit this vulnerability by sending a crafted DHCP request through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: The attack vector is listed as network because a DHCP relay anywhere on the network could allow exploits from networks other than the adjacent one.

A vulnerability in the SIP call processing function of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper parsing of SIP messages. An attacker could exploit this vulnerability by sending a crafted SIP message to an affected Cisco Unified CM or Cisco Unified CM SME device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition that interrupts the communications of reliant voice and video devices.

A vulnerability in the Resource Reservation Protocol (RSVP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a buffer overflow when processing crafted RSVP packets. An attacker could exploit this vulnerability by sending RSVP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the XML service of Cisco IP Phone firmware could allow an unauthenticated, remote attacker to initiate phone calls on an affected device. This vulnerability exists because bounds-checking does not occur while parsing XML requests. An attacker could exploit this vulnerability by sending a crafted XML request to an affected device. A successful exploit could allow the attacker to initiate calls or play sounds on the device.

A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap underflow, resulting in an affected device reloading. This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic..

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the Universal Plug-and-Play (UPnP) service of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of incoming UPnP traffic. An attacker could exploit this vulnerability by sending a crafted UPnP request to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a DoS condition. Cisco has not released software updates that address this vulnerability.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition.

A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.

A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.

A vulnerability in the Secure/Multipurpose Internet Mail Extensions (S/MIME) Decryption and Verification or S/MIME Public Key Harvesting features of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause an affected device to corrupt system memory. A successful exploit could cause the filtering process to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to improper input validation of S/MIME-signed emails. An attacker could exploit this vulnerability by sending a malicious S/MIME-signed email through a targeted device. If Decryption and Verification or Public Key Harvesting is configured, the filtering process could crash due to memory corruption and restart, resulting in a DoS condition. The software could then resume processing the same S/MIME-signed email, causing the filtering process to crash and restart again. A successful exploit could allow the attacker to cause a permanent DoS condition. This vulnerability may require manual intervention to recover the ESA.

A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.

A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.

A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446.

A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition, or to execute arbitrary code on an affected device. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted Smart Install message to an affected device on TCP port 4786. A successful exploit could allow the attacker to cause a buffer overflow on the affected device, which could have the following impacts: Triggering a reload of the device, Allowing the attacker to execute arbitrary code on the device, Causing an indefinite loop on the affected device that triggers a watchdog crash. Cisco Bug IDs: CSCvg76186.

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow condition on the affected device, which will cause the device to reload and result in a DoS condition. Cisco Bug IDs: CSCvg62730.

Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in Cisco Webex Player for Windows and MacOS could allow an attacker to execute arbitrary code on an affected system. This vulnerability is due to insufficient validation of values in Webex recording files that are in Webex Recording Format (WRF). An attacker could exploit this vulnerability by sending a user a malicious WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.