An Improper Handling of Exceptional Conditions vulnerability in the command-line processing of Juniper Networks Junos OS on SRX1500, SRX4100, and SRX4200 devices allows a local, low-privileged authenticated attacker executing the 'show chassis environment pem' command to cause the chassis daemon (chassisd) to crash and restart, resulting in a temporary Denial of Service (DoS). However, repeated execution of this command will eventually cause the chassisd process to fail to restart, impacting packet processing on the system. This issue affects Junos OS on SRX1500, SRX4100, SRX4200:  * All versions before 21.4R3-S9,  * from 22.2 before 22.2R3-S5,  * from 22.3 before 22.3R3-S4,  * from 22.4 before 22.4R3-S4,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2-S1.

Execution of the "show ospf interface extensive" or "show ospf interface detail" CLI commands on a Juniper Networks device running Junos OS may cause the routing protocols process (RPD) to crash and restart if OSPF interface authentication is configured, leading to a Denial of Service (DoS). By continuously executing the same CLI commands, a local attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Note: Only systems utilizing ARM processors, found on the EX2300 and EX3400, are vulnerable to this issue. Systems shipped with other processor architectures are not vulnerable to this issue. The processor architecture can be displayed via the 'uname -a' command. For example: ARM (vulnerable): % uname -a | awk '{print $NF}' arm PowerPC (not vulnerable): % uname -a | awk '{print $NF}' powerpc AMD (not vulnerable): % uname -a | awk '{print $NF}' amd64 Intel (not vulnerable): % uname -a | awk '{print $NF}' i386 This issue affects Juniper Networks Junos OS: 12.3X48 versions prior to 12.3X48-D100; 14.1X53 versions prior to 14.1X53-D140, 14.1X53-D54; 15.1 versions prior to 15.1R7-S7; 15.1X49 versions prior to 15.1X49-D210; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S2, 17.4R3; 18.1 versions prior to 18.1R3-S2; 18.2 versions prior to 18.2R2, 18.2R3; 18.2X75 versions prior to 18.2X75-D40; 18.3 versions prior to 18.3R1-S2, 18.3R2.

On EX2300 and EX3400 series, high disk I/O operations may disrupt the communication between the routing engine (RE) and the packet forwarding engine (PFE). In a virtual chassis (VC) deployment, this issue disrupts communication between the VC members. This issue does not affect other Junos platforms. Affected releases are Junos OS on EX2300 and EX3400 series: 15.1X53 versions prior to 15.1X53-D590; 18.1 versions prior to 18.1R2-S2, 18.1R3; 18.2 versions prior to 18.2R2.

A Heap-based Buffer Overflow vulnerability in the Network Services Daemon (NSD) of Juniper Networks Junos OS allows authenticated, low privileged, local attacker to cause a Denial of Service (DoS). On an SRX 5000 Series device, when executing a specific command repeatedly, memory is corrupted, which leads to a Flow Processing Daemon (flowd) crash. The NSD process has to be restarted to restore services. If this issue occurs, it can be checked with the following command: user@host> request security policies check The following log message can also be observed: Error: policies are out of sync for PFE node<number>.fpc<number>.pic<number>. This issue affects: Juniper Networks Junos OS on SRX 5000 Series * All versions earlier than 20.4R3-S6; * 21.1 versions earlier than 21.1R3-S5; * 21.2 versions earlier than 21.2R3-S4; * 21.3 versions earlier than 21.3R3-S3; * 21.4 versions earlier than 21.4R3-S3; * 22.1 versions earlier than 22.1R3-S1; * 22.2 versions earlier than 22.2R3; * 22.3 versions earlier than 22.3R2.

An Improper Access Control vulnerability in the User Interface (UI) of Juniper Networks Junos OS allows a local, low-privileged attacker to bring down an interface, leading to a Denial-of-Service. Users with "view" permissions can run a specific request interface command which allows the user to shut down the interface. This issue affects Junos OS:  * All versions before 21.2R3-S9, * from 21.4 before 21.4R3-S11, * from 22.2 before 22.2R3-S7, * from 22.4 before 22.4R3-S7, * from 23.2 before 23.2R2-S4, * from 23.4 before 23.4R2-S5,   * from 24.2 before 24.2R2-S1, * from 24.4 before 24.4R1-S3, 24.4R2.

A Missing Release of Memory after Effective Lifetime vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low privileged user to cause an impact to the availability of the device. When RIB sharding is enabled and a user executes one of several routing related 'show' commands, a certain amount of memory is leaked. When all available memory has been consumed rpd will crash and restart. The leak can be monitored with the CLI command: show task memory detail | match task_shard_mgmt_cookie where the allocated memory in bytes can be seen to continuously increase with each exploitation. This issue affects: Junos OS: * all versions before 21.2R3-S9, * 21.4 versions before 21.4R3-S11, * 22.2 versions before 22.2R3-S7, * 22.4 versions before 22.4R3-S7, * 23.2 versions before 23.2R2-S4,  * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R2, * 24.4 versions before 24.4R1-S2, 24.4R2; Junos OS Evolved: * all versions before 22.2R3-S7-EVO * 22.4-EVO versions before 22.4R3-S7-EVO, * 23.2-EVO versions before 23.2R2-S4-EVO, * 23.4-EVO versions before 23.4R2-S4-EVO, * 24.2-EVO versions before 24.2R2-EVO,  * 24.4-EVO versions before 24.4R2-EVO.

An Incorrect Permission Assignment for Critical Resource vulnerability of a certain file in the filesystem of Junos OS allows a local authenticated attacker to cause routing process daemon (RPD) to crash and restart, causing a Denial of Service (DoS). Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S8, 18.4R3-S7; 19.1 versions prior to 19.1R2-S3, 19.1R3-S5; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R1-S1, 20.4R2.

A Stack-based Buffer Overflow vulnerability in the CLI command of Juniper Networks Junos OS allows a low privileged attacker to execute a specific CLI commands leading to Denial of Service. Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks: Junos OS: * All versions prior to 20.4R3-S8; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 22.1 versions prior to 22.1R3-S3; * 22.3 versions prior to 22.3R3; * 22.4 versions prior to 22.4R3.

A Stack-based Buffer Overflow vulnerability in the CLI command of Juniper Networks Junos OS allows a low privileged attacker to execute a specific CLI commands leading to Denial of Service. Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks: Junos OS * All versions prior to 19.1R3-S10; * 19.2 versions prior to 19.2R3-S7; * 19.3 versions prior to 19.3R3-S8; * 19.4 versions prior to 19.4R3-S12; * 20.2 versions prior to 20.2R3-S8; * 20.4 versions prior to 20.4R3-S8; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R3-S1; * 22.4 versions prior to 22.4R2-S1; * 23.2 versions prior to 23.2R2.

A Stack-based Buffer Overflow vulnerability in the CLI command of Juniper Networks Junos and Junos EVO allows a low privileged attacker to execute a specific CLI commands leading to Denial of Service. Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks: Junos OS: * All versions prior to 19.1R3-S10; * 19.2 versions prior to 19.2R3-S7; * 19.3 versions prior to 19.3R3-S8; * 19.4 versions prior to 19.4R3-S12; * 20.2 versions prior to 20.2R3-S8; * 20.4 versions prior to 20.4R3-S8; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S1; * 22.3 versions prior to 22.3R3; * 22.4 versions prior to 22.4R2. Junos OS Evolved: * All versions prior to 20.4R3-S8-EVO; * 21.2 versions prior to 21.2R3-S6-EVO; * 21.3 versions prior to 21.3R3-S5-EVO; * 21.4 versions prior to 21.4R3-S4-EVO; * 22.1 versions prior to 22.1R3-S3-EVO; * 22.2 versions prior to 22.2R3-S1-EVO; * 22.3 versions prior to 22.3R3-EVO; * 22.4 versions prior to 22.4R2-EVO.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged attacker to cause a Denial-of-Service (DoS). When a specific "show bgp neighbor" CLI command is run, the rpd cpu utilization rises and eventually causes a crash and restart. Repeated use of this command will cause a sustained DoS condition.  The device is only affected if BGP RIB sharding and update-threading is enabled. This issue affects Junos OS:  * All versions before 21.2R3-S9,  * from 21.4 before 21.4R3-S8, * from 22.2 before 22.2R3-S6,  * from 22.4 before 22.4R3-S2,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2. and Junos OS Evolved:  * All versions before 21.2R3-S9-EVO,  * from 21.4-EVO before 21.4R3-S8-EVO,  * from 22.2-EVO before 22.2R3-S6-EVO,  * from 22.4-EVO before 22.4R3-S2-EVO,  * from 23.2-EVO before 23.2R2-S3-EVO,  * from 23.4-EVO before 23.4R2-EVO.

When a MX Series is configured as a Broadband Network Gateway (BNG) based on Layer 2 Tunneling Protocol (L2TP), executing certain CLI command may cause the system to run out of disk space, excessive disk usage may cause other complications. An administrator can use the following CLI command to monitor the available disk space: user@device> show system storage Filesystem Size Used Avail Capacity Mounted on /dev/gpt/junos 19G 18G 147M 99% /.mount <<<<< running out of space tmpfs 21G 16K 21G 0% /.mount/tmp tmpfs 5.3G 1.7M 5.3G 0% /.mount/mfs This issue affects Juniper Networks Junos OS on MX Series: 17.3R1 and later versions prior to 17.4R3-S5, 18.1 versions prior to 18.1R3-S13, 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R1-S1, 20.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 17.3R1.

A Reachable Assertion vulnerability in Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a locally-based, low-privileged attacker to cause a Denial of Service (DoS). On all Junos OS and Junos OS Evolved, when a specific L2VPN command is run, RPD will crash and restart. Continued execution of this specific command will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS All versions prior to 19.3R3-S10; 20.1 versions prior to 20.1R3-S4; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S2; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R3; 22.2 versions prior to 22.2R2; 22.3 versions prior to 22.3R2; Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S7-EVO; 21.1 versions prior to 21.1R3-S3-EVO; 21.2 versions prior to 21.2R3-S5-EVO; 21.3 versions prior to 21.3R3-S4-EVO; 21.4 versions prior to 21.4R3-EVO; 22.1 versions prior to 22.1R3-EVO; 22.2 versions prior to 22.2R2-EVO; 22.3 versions prior to 22.3R2-EVO;

A vulnerability in Juniper Networks Junos OS caused by Missing Release of Memory after Effective Lifetime leads to a memory leak each time the CLI command 'show system connections extensive' is executed. The amount of memory leaked on each execution depends on the number of TCP connections from and to the system. Repeated execution will cause more memory to leak and eventually daemons that need to allocate additionally memory and ultimately the kernel to crash, which will result in traffic loss. Continued execution of this command will cause a sustained Denial of Service (DoS) condition. An administrator can use the following CLI command to monitor for increase in memory consumption of the netstat process, if it exists: user@junos> show system processes extensive | match "username|netstat" PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND 21181 root 100 0 5458M 4913M CPU3 2 0:59 97.27% netstat The following log message might be observed if this issue happens: kernel: %KERN-3: pid 21181 (netstat), uid 0, was killed: out of swap space This issue affects Juniper Networks Junos OS 18.2 versions prior to 18.2R2-S8, 18.2R3-S7. 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2; This issue does not affect Juniper Networks Junos OS versions prior to 18.2R1.

A NULL Pointer Dereference vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX304, MX with MPC10/11/LC9600, and EX9200 with EX9200-15C allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). In a VPLS or Junos Fusion scenario, the execution of specific show commands will cause all FPCs hosting VPLS sessions or connecting to satellites to crash and restart. This issue affects Junos on MX304, MX with MPC10/11/LC9600 and EX9200 with EX9200-15C:  * All version before 21.2R3-S1, * 21.3 versions before 21.3R3,  * 21.4 versions before 21.4R2.

A NULL Pointer Dereference vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS allows a local, low-privileged attacker to cause a Denial-of-Service (DoS). When a specific command is executed, the pfe crashes. This will cause traffic forwarding to be interrupted until the system self-recovers. Repeated execution will create a sustained DoS condition. This issue only affects MX Series devices with Line cards MPC1-MPC9. This issue affects: Junos OS on MX Series: * All versions before 21.4R3-S9, * from 22.2 before 22.2R3-S5,  * from 22.3 before 22.3R3-S4, * from 22.4 before 22.4R3-S2, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R2.

A Use After Free vulnerability in the routing protocol daemon of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause Denial of Service (DoS). In a rib sharding scenario the rpd process will crash shortly after specific CLI command is issued. This issue is more likely to occur in a scenario with high route scale (>1M routes). This issue affects: Juniper Networks Junos OS * 20.2 version 20.2R3-S5 and later versions prior to 20.2R3-S6; * 20.3 version 20.3R3-S2 and later versions prior to 20.3R3-S5; * 20.4 version 20.4R3-S1 and later versions prior to 20.4R3-S4 * 21.1 version 21.1R3 and later versions prior to 21.1R3-S3; * 21.2 version 21.2R1-S2, 21.2R2-S1 and later versions prior to 21.2R3-S2; * 21.3 version 21.3R2 and later versions prior to 21.3R3; * 21.4 versions prior to 21.4R2-S1, 21.4R3; * 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved * 20.4-EVO version 20.4R3-S1-EVO and later versions prior to 20.4R3-S6-EVO; * 21.2-EVO version 21.2R1-S2-EVO and later versions prior to 21.2R3-S4-EVO; * 21.3-EVO version 21.3R2-EVO and later versions prior to 21.3R3-S1-EVO; * 21.4-EVO versions prior to 21.4R2-S1-EVO, 21.4R3-EVO; * 22.1-EVO versions prior to 22.1R2-EVO.

An Allocation of Resources Without Limits or Throttling and a Missing Release of Memory after Effective Lifetime vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated low privileged attacker to cause a Denial of Sevice (DoS). In a high-scaled BGP routing environment with rib-sharding enabled, two issues may occur when executing a specific CLI command. One is a memory leak issue with rpd where the leak rate is not constant, and the other is a temporary spike in rpd memory usage during command execution. This issue affects: Juniper Networks Junos OS 19.4 versions prior to 19.4R3-S9; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R1-S2, 21.2R2-S1, 21.2R3; 21.3 versions prior to 21.3R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S1-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO versions prior to 21.2R1-S2-EVO, 21.2R3-EVO; 21.3-EVO versions prior to 21.3R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.2R1.

An Unchecked Return Value to NULL Pointer Dereference vulnerability in Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). In Segment Routing (SR) to Label Distribution Protocol (LDP) interworking scenario, configured with Segment Routing Mapping Server (SRMS) at any node, when an Area Border Router (ABR) leaks the SRMS entries having "S" flag set from IS-IS Level 2 to Level 1, an rpd core might be observed when a specific low privileged CLI command is issued. This issue affects: Juniper Networks Junos OS 21.4 versions prior to 21.4R1-S2, 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved 21.4-EVO versions prior to 21.4R1-S2-EVO, 21.4R2-S1-EVO, 21.4R3-EVO; 22.1-EVO versions prior to 22.1R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 21.4R1. Juniper Networks Junos OS Evolved versions prior to 21.4R1-EVO.

An Improper Preservation of Consistency Between Independent Representations of Shared State vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). If the device is very busy for example while executing a series of show commands on the CLI one or more SFPs might not be detected anymore. The system then changes its state to "unplugged" which is leading to traffic impact and at least a partial DoS. Once the system is less busy the port states return to their actual value. Indicators of compromise are log messages about unplugged SFPs and corresponding syspld messages without any physical or environmental cause. These can be checked by issuing the following commands: user@device# show log messages | match unplugged %PFE-6: fpc0 sfp-0/1/2 SFP unplugged %PFE-6: fpc0 sfp-0/1/3 SFP unplugged The following log messages will also be seen when this issue happens: fpc0 Error tvp_drv_syspld_read: syspld read failed for address <address> fpc0 Error[-1]:tvp_optics_presence_get - Syspld read failed for port <pic/port> fpc0 optics pres failed(-1) for pic <pic> port <port> fpc0 tvp_drv_syspld_read: i2c access retry count 200 This issue affects Juniper Networks Junos OS on EX2300 Series, EX3400 Series: All versions prior to 18.4R3-S11; 19.1 versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R1-S9, 19.2R3-S5; 19.3 versions prior to 19.3R3-S6; 19.4 versions prior to 19.4R2-S7, 19.4R3-S8; 20.1 versions prior to 20.1R3-S4; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3-S3; 21.1 versions prior to 21.1R3-S1; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2; 21.4 versions prior to 21.4R2.

An Improper Release of Memory Before Removing Last Reference vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a local, low privileged attacker to cause an FPC crash, leading to Denial of Service (DoS). On all Junos MX Series with MPC1 - MPC9, LC480, LC2101, MX10003, and MX80, when Connectivity-Fault-Management (CFM) is enabled in a VPLS scenario, and a specific LDP related command is run, an FPC will crash and reboot. Continued execution of this specific LDP command can lead to sustained Denial of Service condition. This issue affects: Juniper Networks Junos OS on MX Series: * All versions prior to 20.4R3-S7; * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S4; * 21.3 versions prior to 21.3R3-S4; * 21.4 versions prior to 21.4R3-S3; * 22.1 versions prior to 22.1R3-S1; * 22.2 versions prior to 22.2R2-S1, 22.2R3; * 22.3 versions prior to 22.3R1-S2, 22.3R2.

An Access of Uninitialized Pointer vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). When an MPLS ping is performed on BGP LSPs, the RPD might crash. Repeated execution of this operation will lead to a sustained DoS. This issue affects: Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S12; 19.1 versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R1-S9, 19.2R3-S5; 19.3 versions prior to 19.3R3-S6; 19.4 versions prior to 19.4R2-S7, 19.4R3-S8; 20.1 versions prior to 20.1R3-S4; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R1-S1, 21.1R2; Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R2-EVO.

An Unchecked Input for Loop Condition vulnerability in a NAT library of Juniper Networks Junos OS allows a local authenticated attacker with low privileges to cause a Denial of Service (DoS). When an inconsistent "deterministic NAT" configuration is present on an SRX, or MX with SPC3 and then a specific CLI command is issued the SPC will crash and restart. Repeated execution of this command will lead to a sustained DoS. Such a configuration is characterized by the total number of port blocks being greater than the total number of hosts. An example for such configuration is: [ services nat source pool TEST-POOL address x.x.x.0/32 to x.x.x.15/32 ] [ services nat source pool TEST-POOL port deterministic block-size 1008 ] [ services nat source pool TEST-POOL port deterministic host address y.y.y.0/24] [ services nat source pool TEST-POOL port deterministic include-boundary-addresses] where according to the following calculation: 65536-1024=64512 (number of usable ports per IP address, implicit) 64512/1008=64 (number of port blocks per Nat IP) x.x.x.0/32 to x.x.x.15/32 = 16 (NAT IP addresses available in NAT pool) total port blocks in NAT Pool = 64 blocks per IP * 16 IPs = 1024 Port blocks host address y.y.y.0/24 = 256 hosts (with include-boundary-addresses) If the port block size is configured to be 4032, then the total port blocks are (64512/4032) * 16 = 256 which is equivalent to the total host addresses of 256, and the issue will not be seen. This issue affects Juniper Networks Junos OS on SRX Series, and MX Series with SPC3: All versions prior to 19.4R3-S10; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S1; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2.

An Out-of-bounds Read vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series allows a local, authenticated attacker with low privileges, to cause a Denial of Service (DoS). If a low privileged user executes a specific CLI command, flowd which is responsible for traffic forwarding in SRX crashes and generates a core dump. This will cause temporary traffic interruption until the flowd process is restarted automatically. Continued execution of this command will lead to a sustained DoS. This issue affects Juniper Networks Junos OS on SRX Series: All versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S4; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R3; 22.3 versions prior to 22.3R2; 22.4 versions prior to 22.4R1-S1, 22.4R2.

An input validation vulnerability exists in Juniper Networks Junos OS, allowing an attacker to crash the srxpfe process, causing a Denial of Service (DoS) through the use of specific maintenance commands. The srxpfe process restarts automatically, but continuous execution of the commands could lead to an extended Denial of Service condition. This issue only affects the SRX1500, SRX4100, SRX4200, NFX150, NFX250, and vSRX-based platforms. No other products or platforms are affected by this vulnerability. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D220 on SRX1500, SRX4100, SRX4200, vSRX; 17.4 versions prior to 17.4R3-S3 on SRX1500, SRX4100, SRX4200, vSRX; 18.1 versions prior to 18.1R3-S11 on SRX1500, SRX4100, SRX4200, vSRX, NFX150; 18.2 versions prior to 18.2R3-S5 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250; 19.1 versions prior to 19.1R3-S2 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250; 19.2 versions prior to 19.2R1-S5, 19.2R3 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250. This issue does not affect Junos OS 19.3 or any subsequent version.

A Missing Release of File Descriptor or Handle after Effective Lifetime vulnerability in plugable authentication module (PAM) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). It is possible that after the termination of a gRPC connection the respective/var/run/<pid>.env file is not getting deleted which if occurring repeatedly can cause inode exhaustion. Inode exhaustion can present itself in two different ways: 1. The following log message can be observed: host kernel: pid <pid> (<process>), uid <uid> inumber <number> on /.mount/var: out of inodes which by itself is a clear indication. 2. The following log message can be observed: host <process>[<pid>]: ... : No space left on device which is not deterministic and just a representation of a write error which could have several reasons. So the following check needs to be done: user@host> show system storage no-forwarding Filesystem Size Used Avail Capacity Mounted on /dev/ada1p1 475M 300M 137M 69% /.mount/var which indicates that the write error is not actually due to a lack of disk space. If either 1. or 2. has been confirmed, then the output of: user@host> file list /var/run/*.env | count need to be checked and if it indicates a high (>10000) number of files the system has been affected by this issue. This issue affects: Juniper Networks Junos OS All versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-EVO; 21.1 versions prior to 21.1R3-S1-EVO; 21.2 versions prior to 21.2R1-S1-EVO, 21.2R2-EVO.

An Improper Handling of Unexpected Data Type vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). Continued execution of this command might cause a sustained Denial of Service condition. If BGP rib sharding is configured and a certain CLI command is executed the rpd process can crash. During the rpd crash and restart, the routing protocols might be impacted and traffic disruption might be seen due to the loss of routing information. This issue affects: Juniper Networks Junos OS 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. Juniper Networks Junos OS Evolved 20.4 versions prior to 20.4R3-EVO; 21.1 versions prior to 21.1R3-EVO; 21.2 versions prior to 21.2R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 20.3R1. Juniper Networks Junos OS Evolved versions prior to 20.3R1-EVO.

A Use After Free vulnerability in command processing of Juniper Networks Junos OS on MX Series allows a local, authenticated attacker to cause the broadband edge service manager daemon (bbe-smgd) to crash upon execution of specific CLI commands, creating a Denial of Service (DoS) condition.  The process crashes and restarts automatically. When specific CLI commands are executed, the bbe-smgd daemon attempts to write into an area of memory (mgd socket) that was already closed, causing the process to crash.  This process manages and controls the configuration of broadband subscriber sessions and services.  While the process is unavailable, additional subscribers will not be able to connect to the device, causing a temporary Denial of Service condition. This issue only occurs if Graceful Routing Engine Switchover (GRES) and Subscriber Management are enabled. This issue affects Junos OS: * All versions before 20.4R3-S5, * from 21.1 before 21.1R3-S4, * from 21.2 before 21.2R3-S3, * from 21.3 before 21.3R3-S5, * from 21.4 before 21.4R3-S5, * from 22.1 before 22.1R3, * from 22.2 before 22.2R3, * from 22.3 before 22.3R2;

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on EX4300 Series allows a locally authenticated attacker with low privileges to cause a Denial-of-Service (Dos). If a specific CLI command is issued, a PFE crash will occur. This will cause traffic forwarding to be interrupted until the system self-recovers.  This issue affects Junos OS:  All versions before 20.4R3-S10, 21.2 versions before 21.2R3-S7, 21.4 versions before 21.4R3-S6.

An Improper Input Validation vulnerability in the 802.1X Authentication (dot1x) Daemon of Juniper Networks Junos OS allows a local, low-privileged attacker with access to the CLI to cause a Denial of Service (DoS). On running a specific operational dot1x command, the dot1x daemon crashes. An attacker can cause a sustained DoS condition by running this command repeatedly. When the crash occurs, the authentication status of any 802.1x clients is cleared, and any authorized dot1x port becomes unauthorized. The client cannot re-authenticate until the dot1x daemon restarts. This issue affects Junos OS: * All versions before 20.4R3-S10; * 21.2 versions before 21.2R3-S7; * 21.4 versions before 21.4R3-S6; * 22.1 versions before 22.1R3-S5; * 22.2 versions before 22.2R3-S3; * 22.3 versions before 22.3R3-S2; * 22.4 versions before 22.4R3-S1; * 23.2 versions before 23.2R2.

An Improper Input Validation vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved allows a local, low-privileged attacker to cause a Denial of Service (DoS). When a specific "clear" command is run, the Advanced Forwarding Toolkit manager (evo-aftmand-bt or evo-aftmand-zx) crashes and restarts. The crash impacts all traffic going through the FPCs, causing a DoS. Running the command repeatedly leads to a sustained DoS condition. This issue affects Junos OS Evolved:  * All versions before 20.4R3-S9-EVO,  * from 21.2-EVO before 21.2R3-S7-EVO,  * from 21.3-EVO before 21.3R3-S5-EVO,  * from 21.4-EVO before 21.4R3-S6-EVO,  * from 22.1-EVO before 22.1R3-S4-EVO,  * from 22.2-EVO before 22.2R3-S3-EVO,  * from 22.3-EVO before 22.3R3-S3-EVO,  * from 22.4-EVO before 22.4R3-EVO, * from 23.2-EVO before 23.2R2-EVO.

SSL-Proxy feature on SRX devices fails to handle a hardware resource limitation which can be exploited by remote SSL/TLS servers to crash the flowd daemon. Repeated crashes of the flowd daemon can result in an extended denial of service condition. For this issue to occur, clients protected by the SRX device must initiate a connection to the malicious server. This issue affects: Juniper Networks Junos OS on SRX5000 Series: 12.3X48 versions prior to 12.3X48-D85; 15.1X49 versions prior to 15.1X49-D180; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S6, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.

The flowd process, responsible for forwarding traffic in SRX Series services gateways, may crash and restart when processing specific transit IP packets through an IPSec tunnel. Continued processing of these packets may result in an extended Denial of Service (DoS) condition. This issue only occurs when IPSec tunnels are configured. Systems without IPSec tunnel configurations are not vulnerable to this issue. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D171, 15.1X49-D180 on SRX Series; 18.2 versions 18.2R2-S1 and later, prior to 18.2R3 on SRX Series; 18.4 versions prior to 18.4R2 on SRX Series.

An Improper Handling of Exceptional Conditions vulnerability in the broadband edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an attacker directly connected to the vulnerable system who repeatedly flaps DHCP subscriber sessions to cause a slow memory leak, ultimately leading to a Denial of Service (DoS). Memory can only be recovered by manually restarting bbe-smgd. This issue only occurs if BFD liveness detection for DHCP subscribers is enabled. Systems without BFD liveness detection enabled are not vulnerable to this issue. Indication of the issue can be observed by periodically executing the 'show system processes extensive' command, which will indicate an increase in memory allocation for bbe-smgd. A small amount of memory is leaked every time a DHCP subscriber logs in, which will become visible over time, ultimately leading to memory starvation. user@junos> show system processes extensive | match bbe-smgd 13071 root 24 0 415M 201M select 0 0:41 7.28% bbe-smgd{bbe-smgd} 13071 root 20 0 415M 201M select 1 0:04 0.00% bbe-smgd{bbe-smgd} ... user@junos> show system processes extensive | match bbe-smgd 13071 root 20 0 420M 208M select 0 4:33 0.10% bbe-smgd{bbe-smgd} 13071 root 20 0 420M 208M select 0 0:12 0.00% bbe-smgd{bbe-smgd} ... This issue affects Juniper Networks Junos OS on MX Series: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.2 versions earlier than 23.2R1-S1, 23.2R2.

An Improper Handling of Exceptional Conditions vulnerability in BGP session processing of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker, using specific timing outside the attacker's control, to flap BGP sessions and cause the routing protocol daemon (rpd) process to crash and restart, leading to a Denial of Service (DoS) condition. Continued BGP session flapping will create a sustained Denial of Service (DoS) condition. This issue only affects routers configured with non-stop routing (NSR) enabled. Graceful Restart (GR) helper mode, enabled by default, is also required for this issue to be exploitable. Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. When the BGP session flaps on the NSR-enabled router, the device enters GR-helper/LLGR-helper mode due to the peer having negotiated GR/LLGR-restarter capability and the backup BGP requests for replication of the GR/LLGR-helper session, master BGP schedules, and initiates replication of GR/LLGR stale routes to the backup BGP. In this state, if the BGP session with the BGP peer comes up again, unsolicited replication is initiated for the peer without cleaning up the ongoing GR/LLGR-helper mode replication. This parallel two instances of replication for the same peer leads to the assert if the BGP session flaps again. This issue affects: Juniper Networks Junos OS * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S1; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.2 versions earlier than 23.2R1-S1, 23.2R2. Juniper Networks Junos OS Evolved * All versions earlier than 21.3R3-S5-EVO; * 21.4 versions earlier than 21.4R3-S5-EVO; * 22.1 versions earlier than 22.1R3-S4-EVO; * 22.2 versions earlier than 22.2R3-S3-EVO; * 22.3 versions earlier than 22.3R3-S1-EVO; * 22.4 versions earlier than 22.4R2-S2-EVO, 22.4R3-EVO; * 23.2 versions earlier than 23.2R1-S1-EVO, 23.2R2-EVO.

An Improper Handling of Exceptional Conditions vulnerability in Berkeley Packet Filter (BPF) processing of Juniper Networks Junos OS allows an attacker, in rare cases, sending specific, unknown traffic patterns to cause the FPC and system to crash and restart. BPF provides a raw interface to data link layers in a protocol independent fashion. Internally within the Junos kernel, due to a rare timing issue (race condition), when a BPF instance is cloned, the newly created interface causes an internal structure leakage, leading to a system crash. The precise content and timing of the traffic patterns is indeterminate, but has been seen in a lab environment multiple times. This issue is more likely to occur when packet capturing is enabled.  See required configuration below. This issue affects Junos OS:  * all versions before 21.2R3-S9,  * from 21.4 before 21.4R3-S10,  * from 22.2 before 22.2R3-S6,  * from 22.4 before 22.4R3-S7,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2-S3,  * from 24.2 before 24.2R1-S1, 24.2R2.

An Improper Handling of Exceptional Conditions vulnerability in route processing of Juniper Networks Junos OS on specific end-of-life (EOL) ACX Series platforms allows an attacker to crash the Forwarding Engine Board (FEB) by flapping an interface, leading to a Denial of Service (DoS). On ACX1000, ACX1100, ACX2000, ACX2100, ACX2200, ACX4000, ACX5048, and ACX5096 devices, FEB0 will crash when the primary path port of the L2 circuit IGP (Interior Gateway Protocol) on the local device goes down. This issue is seen only when 'hot-standby' mode is configured for the L2 circuit. This issue affects Junos OS on ACX1000, ACX1100, ACX2000, ACX2100, ACX2200, ACX4000, ACX5048, and ACX5096:  * all versions before 21.2R3-S9.

An Improper Check for Unusual or Exceptional Conditions vulnerability combined with Improper Handling of Exceptional Conditions in Juniper Networks Junos OS on QFX Series and PTX Series allows an unauthenticated network based attacker to cause increased FPC CPU utilization by sending specific IP packets which are being VXLAN encapsulated leading to a partial Denial of Service (DoS). Continued receipted of these specific traffic will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on QFX Series: All versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2. Juniper Networks Junos OS on PTX Series: All versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R2-S1, 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.

An Improper Handling of Exceptional Conditions vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an attacker to inject a specific BGP update, causing the routing protocol daemon (RPD) to crash and restart, leading to a Denial of Service (DoS). Continued receipt and processing of the BGP update will create a sustained Denial of Service (DoS) condition. This issue affects very specific versions of Juniper Networks Junos OS: 19.3R3-S2; 19.4R3-S3; 20.2 versions 20.2R2-S3 and later, prior to 20.2R3-S2; 20.3 versions 20.3R2 and later, prior to 20.3R3; 20.4 versions 20.4R2 and later, prior to 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS 20.1 is not affected by this issue. This issue also affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-S3-EVO, 20.4R3-EVO; 21.1-EVO versions prior to 21.1R2-EVO; 21.2-EVO versions prior to 21.2R2-EVO.

An Improper Handling of Exceptional Conditions vulnerability in AS PATH processing of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a BGP update message with an AS PATH containing a large number of 4-byte ASes, leading to a Denial of Service (DoS). Continued receipt and processing of these BGP updates will create a sustained Denial of Service (DoS) condition. This issue is hit when the router has Non-Stop Routing (NSR) enabled, has a non-4-byte-AS capable BGP neighbor, receives a BGP update message with a prefix that includes a long AS PATH containing large number of 4-byte ASes, and has to advertise the prefix towards the non-4-byte-AS capable BGP neighbor. Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. This issue affects: Juniper Networks Junos OS: * All versions prior to 20.4R3-S8; * 21.1 versions 21.1R1 and later; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S4; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R2-S2, 22.3R3-S1; * 22.4 versions prior to 22.4R2-S1, 22.4R3. Juniper Networks Junos OS Evolved * All versions prior to 20.4R3-S8-EVO; * 21.1 versions 21.1R1-EVO and later; * 21.2 versions prior to 21.2R3-S6-EVO; * 21.3 versions prior to 21.3R3-S5-EVO; * 21.4 versions prior to 21.4R3-S5-EVO; * 22.1 versions prior to 22.1R3-S4-EVO; * 22.2 versions prior to 22.2R3-S2-EVO; * 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO; * 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO.

Due to a vulnerability in DDoS protection in Juniper Networks Junos OS and Junos OS Evolved on QFX5K Series switches in a VXLAN configuration, instability might be experienced in the underlay network as a consequence of exceeding the default ddos-protection aggregate threshold. If an attacker on a client device on the overlay network sends a high volume of specific, legitimate traffic in the overlay network, due to an improperly detected DDoS violation, the leaf might not process certain L2 traffic, sent by spines in the underlay network. Continued receipt and processing of the high volume traffic will sustain the Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on QFX5K Series: 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R2-S8, 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. Juniper Networks Junos OS Evolved on QFX5220: All versions prior to 20.3R2-EVO.

An Improper Check for Unusual or Exceptional Conditions vulnerability in Juniper DHCP Daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause the jdhcpd to consume all the CPU cycles resulting in a Denial of Service (DoS). On Junos OS devices with forward-snooped-client configured, if an attacker sends a specific DHCP packet to a non-configured interface, this will cause an infinite loop. The DHCP process will have to be restarted to recover the service. This issue affects: Juniper Networks Junos OS * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.2 versions earlier than 23.2R2.

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker sending a specific BGP update packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continuous receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability. This issue affects Junos OS:  * from 21.4 before 21.4R3-S9,  * from 22.2 before 22.2R3-S5,  * from 22.3 before 22.3R3-S4, * from 22.4 before 22.4R3-S5,  * from 23.2 before 23.2R2-S3,  * from 23.4 before 23.4R2-S3,  * from 24.2 before 24.2R1-S2, 24.2R2;  This issue does not affect versions prior to 21.1R1. Junos OS Evolved:  * from 21.4 before 21.4R3-S9-EVO,  * from 22.2 before 22.2R3-S5-EVO,  * from 22.3 before 22.3R3-S4-EVO, * from 22.4 before 22.4R3-S5-EVO,  * from 23.2 before 23.2R2-S3-EVO,  * from 23.4 before 23.4R2-S3-EVO,  * from 24.2 before 24.2R1-S2-EVO, 24.2R2-EVO. This issue does not affect versions prior to 21.1R1-EVO

An Improper Handling of Exceptional Conditions vulnerability in the processing of a transit or directly received malformed IPv6 packet in Juniper Networks Junos OS results in a kernel crash, causing the device to restart, leading to a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue only affects systems with IPv6 configured. Devices with only IPv4 configured are not vulnerable to this issue. This issue affects Juniper Networks Junos OS: 19.4 versions prior to 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2. This issue does not affect Juniper Networks Junos OS versions prior to 19.4R1.

Improper Handling of Exceptional Conditions in Ethernet interface frame processing of Juniper Networks Junos OS allows an attacker to send specially crafted frames over the local Ethernet segment, causing the interface to go into a down state, resulting in a Denial of Service (DoS) condition. The interface does not recover on its own and the FPC must be reset manually. Continued receipt and processing of these frames will create a sustained Denial of Service (DoS) condition. This issue is platform-specific and affects the following platforms and line cards: * MPC7E/8E/9E and MPC10E on MX240, MX480, MX960, MX2008, MX2010, and MX2020 * MX204, MX10003, MX10008, MX10016 * EX9200, EX9251 * SRX4600 No other products or platforms are affected by this vulnerability. An indication of this issue occurring can be seen in the system log messages, as shown below: user@host> show log messages | match "Failed to complete DFE tuning" fpc4 smic_phy_dfe_tuning_state: et-4/1/6 - Failed to complete DFE tuning (count 3) and interface will be in a permanently down state: user@host> show interfaces et-4/1/6 terse Interface Admin Link Proto Local Remote et-4/1/6 up down et-4/1/6.0 up down aenet --> ae101.0 This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S7 on MX Series; 17.1R1 and later versions prior to 17.2R3-S3 on MX Series; 17.3 versions prior to 17.3R3-S8 on MX Series; 17.4 versions prior to 17.4R2-S11, 17.4R3-S1 on MX Series, SRX4600; 18.1 versions prior to 18.1R3-S10 on MX Series, EX9200 Series, SRX4600; 18.2 versions prior to 18.2R3-S3 on MX Series, EX9200 Series, SRX4600; 18.3 versions prior to 18.3R3-S1 on MX Series, EX9200 Series, SRX4600; 18.4 versions prior to 18.4R2-S3, 18.4R3 on MX Series, EX9200 Series, SRX4600; 19.1 versions prior to 19.1R2-S1, 19.1R3 on MX Series, EX9200 Series, SRX4600; 19.2 versions prior to 19.2R1-S3, 19.2R2 on MX Series, EX9200 Series, SRX4600; 19.3 versions prior to 19.3R2 on MX Series, EX9200 Series, SRX4600. This issue does not affect Juniper Networks Junos OS versions prior to 16.1R1.

A vulnerability in the processing of TCP MD5 authentication in Juniper Networks Junos OS Evolved may allow a BGP or LDP session configured with MD5 authentication to succeed, even if the peer does not have TCP MD5 authentication enabled. This could lead to untrusted or unauthorized sessions being established, resulting in an impact on confidentiality or stability of the network. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.3R2-S1-EVO; 20.4 versions prior to 20.4R2-EVO; 21.1 versions prior to 21.1R2-EVO. Juniper Networks Junos OS is not affected by this issue.

A vulnerability in the processing of traffic matching a firewall filter containing a syslog action in Juniper Networks Junos OS on MX Series with MPC10/MPC11 cards installed, PTX10003 and PTX10008 Series devices, will cause the line card to crash and restart, creating a Denial of Service (DoS). Continued receipt and processing of packets matching the firewall filter can create a sustained Denial of Service (DoS) condition. When traffic hits the firewall filter, configured on lo0 or any physical interface on the line card, containing a term with a syslog action (e.g. 'term <name> then syslog'), the affected line card will crash and restart, impacting traffic processing through the ports of the line card. This issue only affects MX Series routers with MPC10 or MPC11 line cards, and PTX10003 or PTX10008 Series packet transport routers. No other platforms or models of line cards are affected by this issue. Note: This issue has also been identified and described in technical service bulletin TSB17931 (login required). This issue affects: Juniper Networks Junos OS on MX Series: 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2. Juniper Networks Junos OS Evolved on PTX10003, PTX10008: All versions prior to 20.4R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.3R1.

On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash with a core dump if a specific DHCPv6 packet is received, resulting in a restart of the daemon. The daemon automatically restarts without intervention, but continued receipt and processing of these specific packets will repeatedly crash the JDHCPD process and sustain the Denial of Service (DoS) condition. This issue only affects DHCPv6. DHCPv4 is not affected by this issue. This issue affects: Juniper Networks Junos OS 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1, 19.3R3-S2; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2.

An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based, unauthenticated attacker to cause Denial of Service (DoS). When a BGP UPDATE with malformed path attribute is received over an established BGP session, rpd crashes and restarts. Continuous receipt of a BGP UPDATE with a specifically malformed path attribute will create a sustained Denial of Service (DoS) condition for impacted devices. While this issue affects systems running 32-bit and 64-bit systems, the probability of impact on 64-bit system is extremely low.  According to KB25803 https://supportportal.juniper.net/s/article/Junos-How-to-check-if-Junos-OS-is-64-or-32-bit-on-a-router , customers can confirm 32-bit or 64-bit system via the ' show version detail ' command:      lab@router> show version detail| match 32      JUNOS 32-bit kernel Software Suite       lab@router> show version detail| match 64      JUNOS 64-bit kernel Software Suite  This issue affects:  Juniper Networks Junos OS:  * All versions before 21.4R3-S8,  * from 22.2 before 22.2R3-S4,  * from 22.4 before 22.4R3-S3,  * from 23.2 before 23.2R2-S1,  * from 23.4 before 23.4R1-S2, 23.4R2.  Juniper Networks Junos OS Evolved:  * All versions before 21.4R3-S8-EVO, * from 22.2 before 22.2R3-S4-EVO, * from 22.4 before 22.4R3-S3-EVO, * from 23.2 before 23.2R2-S1-EVO, * from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO.

An Improper Handling of Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of the Juniper Networks Junos OS Evolved on ACX Series devices allows an unauthenticated, network based attacker sending specific transit protocol traffic to cause a partial Denial of Service (DoS) to downstream devices. Receipt of specific transit protocol packets is incorrectly processed by the Routing Engine (RE), filling up the DDoS protection queue which is shared between routing protocols. This influx of transit protocol packets causes DDoS protection violations, resulting in protocol flaps which can affect connectivity to networking devices. This issue affects both IPv4 and IPv6. This issue does not require any specific routing protocol to be configured or enabled. The following commands can be used to monitor the DDoS protection queue:        labuser@re0> show evo-pfemand host pkt-stats     labuser@re0> show host-path ddos all-policers This issue affects Junos OS Evolved:  * All versions before 21.4R3-S8-EVO,  * from 22.2 before 22.2R3-S4-EVO,  * from 22.3 before 22.3R3-S4-EVO,  * from 22.4 before 22.4R3-S3-EVO,  * from 23.2 before 23.2R2-EVO,  * from 23.4 before 23.4R1-S1-EVO, 23.4R2-EVO,  * from 24.2 before 24.2R2-EVO.