The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. A vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically due to internal optimizations being frequently bypassed. The query planner includes an optimization that significantly speeds up planning for applicable GraphQL selections. However, queries with deeply nested and reused named fragments can generate many selections where this optimization does not apply, leading to significantly longer planning times. Because the query planner does not enforce a timeout, a small number of such queries can exhaust router's thread pool, rendering it inoperable. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.

The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Prior to 1.61.2 and 2.1.1, a vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically during named fragment expansion. Named fragments were being expanded once per fragment spread during query planning, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.

The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. A vulnerability in Apollo Router's usage of Apollo Compiler allowed queries with deeply nested and reused named fragments to be prohibitively expensive to validate. This could lead to excessive resource consumption and denial of service. Apollo Router's usage of Apollo Compiler has been updated so that validation logic processes each named fragment only once, preventing redundant traversal. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.

Apollo Gateway provides utilities for combining multiple GraphQL microservices into a single GraphQL endpoint. Prior to 2.10.1, a vulnerability in Apollo Gateway allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically due to internal optimizations being frequently bypassed. The query planner includes an optimization that significantly speeds up planning for applicable GraphQL selections. However, queries with deeply nested and reused named fragments can generate many selections where this optimization does not apply, leading to significantly longer planning times. Because the query planner does not enforce a timeout, a small number of such queries can render gateway inoperable. This could lead to excessive resource consumption and denial of service. This has been remediated in @apollo/gateway version 2.10.1.

Apollo Gateway provides utilities for combining multiple GraphQL microservices into a single GraphQL endpoint. Prior to 2.10.1, a vulnerability in Apollo Gateway allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically during named fragment expansion. Named fragments were being expanded once per fragment spread during query planning, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service. This has been remediated in @apollo/gateway version 2.10.1.

The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Instances of the Apollo Router running versions >=1.21.0 and < 1.52.1 are impacted by a denial of service vulnerability if _all_ of the following are true: 1. The Apollo Router has been configured to support [External Coprocessing](https://www.apollographql.com/docs/router/customizations/coprocessor). 2. The Apollo Router has been configured to send request bodies to coprocessors. This is a non-default configuration and must be configured intentionally by administrators. Instances of the Apollo Router running versions >=1.7.0 and <1.52.1 are impacted by a denial-of-service vulnerability if all of the following are true: 1. Router has been configured to use a custom-developed Native Rust Plugin. 2. The plugin accesses Request.router_request in the RouterService layer. 3. You are accumulating the body from Request.router_request into memory. If using an impacted configuration, the Router will load entire HTTP request bodies into memory without respect to other HTTP request size-limiting configurations like limits.http_max_request_bytes. This can cause the Router to be out-of-memory (OOM) terminated if a sufficiently large request is sent to the Router. By default, the Router sets limits.http_max_request_bytes to 2 MB. If you have an impacted configuration as defined above, please upgrade to at least Apollo Router 1.52.1. If you cannot upgrade, you can mitigate the denial-of-service opportunity impacting External Coprocessors by setting the coprocessor.router.request.body configuration option to false. Please note that changing this configuration option will change the information sent to any coprocessors you have configured and may impact functionality implemented by those coprocessors. If you have developed a Native Rust Plugin and cannot upgrade, you can update your plugin to either not accumulate the request body or enforce a maximum body size limit. You can also mitigate this issue by limiting HTTP body payload sizes prior to the Router (e.g., in a proxy or web application firewall appliance).

The Apollo Router is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Affected versions are subject to a Denial-of-Service (DoS) type vulnerability which causes the Router to panic and terminate when GraphQL Subscriptions are enabled. It can be triggered when **all of the following conditions are met**: 1. Running Apollo Router v1.28.0, v1.28.1 or v1.29.0 ("impacted versions"); **and** 2. The Supergraph schema provided to the Router (either via Apollo Uplink or explicitly via other configuration) **has a `subscription` type** with root-fields defined; **and** 3. The YAML configuration provided to the Router **has subscriptions enabled** (they are _disabled_ by default), either by setting `enabled: true` _or_ by setting a valid `mode` within the `subscriptions` object (as seen in [subscriptions' documentation](https://www.apollographql.com/docs/router/executing-operations/subscription-support/#router-setup)); **and** 4. An [anonymous](https://spec.graphql.org/draft/#sec-Anonymous-Operation-Definitions) (i.e., un-named) `subscription` operation (e.g., `subscription { ... }`) is received by the Router If **all four** of these criteria are met, the impacted versions will panic and terminate. There is no data-privacy risk or sensitive-information exposure aspect to this vulnerability. This is fixed in Apollo Router v1.29.1. Users are advised to upgrade. Updating to v1.29.1 should be a clear and simple upgrade path for those running impacted versions. However, if Subscriptions are **not** necessary for your Graph – but are enabled via configuration — then disabling subscriptions is another option to mitigate the risk.

The Apollo Router is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation. Affected versions are subject to a Denial-of-Service (DoS) type vulnerability which causes the Router to panic and terminate when a multi-part response is sent. When users send queries to the router that uses the `@defer` or Subscriptions, the Router will panic. To be vulnerable, users of Router must have a coprocessor with `coprocessor.supergraph.response` configured in their `router.yaml` and also to support either `@defer` or Subscriptions. Apollo Router version 1.33.0 has a fix for this vulnerability which was introduced in PR #4014. Users are advised to upgrade. Users unable to upgrade should avoid using the coprocessor supergraph response or disable defer and subscriptions support and continue to use the coprocessor supergraph response.

The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Prior to 1.61.2 and 2.1.1, the operation limits plugin uses unsigned 32-bit integers to track limit counters (e.g. for a query's height). If a counter exceeded the maximum value for this data type (4,294,967,295), it wrapped around to 0, unintentionally allowing queries to bypass configured thresholds. This could occur for large queries if the payload limit were sufficiently increased, but could also occur for small queries with deeply nested and reused named fragments. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.

The Apollo Router is a graph router written in Rust to run a federated supergraph that uses Apollo Federation. Versions 0.9.5 until 1.40.2 are subject to a Denial-of-Service (DoS) type vulnerability. When receiving compressed HTTP payloads, affected versions of the Router evaluate the `limits.http_max_request_bytes` configuration option after the entirety of the compressed payload is decompressed. If affected versions of the Router receive highly compressed payloads, this could result in significant memory consumption while the compressed payload is expanded. Router version 1.40.2 has a fix for the vulnerability. Those who are unable to upgrade may be able to implement mitigations at proxies or load balancers positioned in front of their Router fleet (e.g. Nginx, HAProxy, or cloud-native WAF services) by creating limits on HTTP body upload size.

Apollo Federation is an architecture for declaratively composing APIs into a unified graph. Each team can own their slice of the graph independently, empowering them to deliver autonomously and incrementally. Instances of @apollo/query-planner >=2.0.0 and <2.8.5 are impacted by a denial-of-service vulnerability. @apollo/gateway versions >=2.0.0 and < 2.8.5 and Apollo Router <1.52.1 are also impacted through their use of @apollo/query-panner. If @apollo/query-planner is asked to plan a sufficiently complex query, it may loop infinitely and never complete. This results in unbounded memory consumption and either a crash or out-of-memory (OOM) termination. This issue can be triggered if you have at least one non-@key field that can be resolved by multiple subgraphs. To identify these shared fields, the schema for each subgraph must be reviewed. The mechanism to identify shared fields varies based on the version of Federation your subgraphs are using. You can check if your subgraphs are using Federation 1 or Federation 2 by reviewing their schemas. Federation 2 subgraph schemas will contain a @link directive referencing the version of Federation being used while Federation 1 subgraphs will not. For example, in a Federation 2 subgraph, you will find a line like @link(url: "https://specs.apollo.dev/federation/v2.0"). If a similar @link directive is not present in your subgraph schema, it is using Federation 1. Note that a supergraph can contain a mix of Federation 1 and Federation 2 subgraphs. This issue results from the Apollo query planner attempting to use a Number exceeding Javascript’s Number.MAX_VALUE in some cases. In Javascript, Number.MAX_VALUE is (2^1024 - 2^971). When the query planner receives an inbound graphql request, it breaks the query into pieces and for each piece, generates a list of potential execution steps to solve the piece. These candidates represent the steps that the query planner will take to satisfy the pieces of the larger query. As part of normal operations, the query planner requires and calculates the number of possible query plans for the total query. That is, it needs the product of the number of query plan candidates for each piece of the query. Under normal circumstances, after generating all query plan candidates and calculating the number of all permutations, the query planner moves on to stack rank candidates and prune less-than-optimal options. In particularly complex queries, especially those where fields can be solved through multiple subgraphs, this can cause the number of all query plan permutations to balloon. In worst-case scenarios, this can end up being a number larger than Number.MAX_VALUE. In Javascript, if Number.MAX_VALUE is exceeded, Javascript represents the value as “infinity”. If the count of candidates is evaluated as infinity, the component of the query planner responsible for pruning less-than-optimal query plans does not actually prune candidates, causing the query planner to evaluate many orders of magnitude more query plan candidates than necessary. This issue has been addressed in @apollo/query-planner v2.8.5, @apollo/gateway v2.8.5, and Apollo Router v1.52.1. Users are advised to upgrade. This issue can be avoided by ensuring there are no fields resolvable from multiple subgraphs. If all subgraphs are using Federation 2, you can confirm that you are not impacted by ensuring that none of your subgraph schemas use the @shareable directive. If you are using Federation 1 subgraphs, you will need to validate that there are no fields resolvable by multiple subgraphs.

There is a resource management error vulnerability in eCNS280_TD V100R005C10SPC650. An attacker needs to perform specific operations to exploit the vulnerability on the affected device. Due to improper resource management of the function, the vulnerability can be exploited to cause service abnormal on affected devices.

Possible NLDAP Denial of Service attack Vulnerability in eDirectory has been discovered in OpenText™ eDirectory before 9.2.4.0000.

An unauthenticated remote attacker can cause a DoS in the controller due to uncontrolled resource consumption.

Resolver caches and authoritative zone databases that hold significant numbers of RRs for the same hostname (of any RTYPE) can suffer from degraded performance as content is being added or updated, and also when handling client queries for this name. This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.4-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1.

In Qt through 5.14.1, the WebSocket implementation accepts up to 2GB for frames and 2GB for messages. Smaller limits cannot be configured. This makes it easier for attackers to cause a denial of service (memory consumption).

An unauthenticated remote attacker may use an uncontrolled resource consumption in the IEC 61131 program of the affected products by creating large amounts of network traffic that needs to be handled by the ILC. This results in a Denial-of-Service of the device.

A vulnerability has been discovered in Citrix ADC (formerly known as NetScaler ADC) and Citrix Gateway (formerly known as NetScaler Gateway), and Citrix SD-WAN WANOP Edition models 4000-WO, 4100-WO, 5000-WO, and 5100-WO. These vulnerabilities, if exploited, could lead to the limited available disk space on the appliances being fully consumed.

Cloudflare Quiche (through version 0.19.1/0.20.0) was affected by an unlimited resource allocation vulnerability causing rapid increase of memory usage of the system running quiche server or client. A remote attacker could take advantage of this vulnerability by repeatedly sending an unlimited number of 1-RTT CRYPTO frames after previously completing the QUIC handshake. Exploitation was possible for the duration of the connection which could be extended by the attacker.  quiche 0.19.2 and 0.20.1 are the earliest versions containing the fix for this issue.

Crash in USB HID dissector in Wireshark 3.4.0 to 3.4.2 allows denial of service via packet injection or crafted capture file

In version 0.3.32 of open-webui/open-webui, the absence of authentication mechanisms allows any unauthenticated attacker to access the `api/v1/utils/code/format` endpoint. If a malicious actor sends a POST request with an excessively high volume of content, the server could become completely unresponsive. This could lead to severe performance issues, causing the server to become unresponsive or experience significant degradation, ultimately resulting in service interruptions for legitimate users.

Clients using DNS-over-HTTPS (DoH) can exhaust a DNS resolver's CPU and/or memory by flooding it with crafted valid or invalid HTTP/2 traffic. This issue affects BIND 9 versions 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, and 9.18.11-S1 through 9.18.32-S1.

VMware Workspace ONE UEM REST API contains a denial of service vulnerability. A malicious actor with access to /API/system/admins/session could cause an API denial of service due to improper rate limiting.

On WAGO PFC200 devices in different firmware versions with special crafted packets an attacker with network access to the device could cause a denial of service for the login service of the runtime.

Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Http4s before versions 0.21.17, 0.22.0-M2, and 1.0.0-M14 have a vulnerability which can lead to a denial-of-service. Blaze-core, a library underlying http4s-blaze-server, accepts connections unboundedly on its selector pool. This has the net effect of amplifying degradation in services that are unable to handle their current request load, since incoming connections are still accepted and added to an unbounded queue. Each connection allocates a socket handle, which drains a scarce OS resource. This can also confound higher level circuit breakers which work based on detecting failed connections. http4s provides a general "MaxActiveRequests" middleware mechanism for limiting open connections, but it is enforced inside the Blaze accept loop, after the connection is accepted and the socket opened. Thus, the limit only prevents the number of connections which can be simultaneously processed, not the number of connections which can be held open. In 0.21.17, 0.22.0-M2, and 1.0.0-M14, a new "maxConnections" property, with a default value of 1024, has been added to the `BlazeServerBuilder`. Setting the value to a negative number restores unbounded behavior, but is strongly disrecommended. The NIO2 backend does not respect `maxConnections`. Its use is now deprecated in http4s-0.21, and the option is removed altogether starting in http4s-0.22. There are several possible workarounds described in the refrenced GitHub Advisory GHSA-xhv5-w9c5-2r2w.

Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines() method would not "pause" writing and signal to the Protocol to drain the buffer to the wire once the write buffer reached the "high-water mark". Because of this, Protocols would not periodically drain the write buffer potentially leading to memory exhaustion. This vulnerability likely impacts a small number of users, you must be using Python 3.12.0 or later, on macOS or Linux, using the asyncio module with protocols, and using .writelines() method which had new zero-copy-on-write behavior in Python 3.12.0 and later. If not all of these factors are true then your usage of Python is unaffected.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

blaze is a Scala library for building asynchronous pipelines, with a focus on network IO. All servers running blaze-core before version 0.14.15 are affected by a vulnerability in which unbounded connection acceptance leads to file handle exhaustion. Blaze, accepts connections unconditionally on a dedicated thread pool. This has the net effect of amplifying degradation in services that are unable to handle their current request load, since incoming connections are still accepted and added to an unbounded queue. Each connection allocates a socket handle, which drains a scarce OS resource. This can also confound higher level circuit breakers which work based on detecting failed connections. The vast majority of affected users are using it as part of http4s-blaze-server <= 0.21.16. http4s provides a mechanism for limiting open connections, but is enforced inside the Blaze accept loop, after the connection is accepted and the socket opened. Thus, the limit only prevents the number of connections which can be simultaneously processed, not the number of connections which can be held open. The issue is fixed in version 0.14.15 for "NIO1SocketServerGroup". A "maxConnections" parameter is added, with a default value of 512. Concurrent connections beyond this limit are rejected. To run unbounded, which is not recommended, set a negative number. The "NIO2SocketServerGroup" has no such setting and is now deprecated. There are several possible workarounds described in the refrenced GitHub Advisory GHSA-xmw9-q7x9-j5qc.

A remote, unauthenticated attacker could cause a denial-of-service of PHOENIX CONTACT FL MGUARD and TC MGUARD devices below version 8.9.0 by sending a larger number of unauthenticated HTTPS connections originating from different source IP’s. Configuring firewall limits for incoming connections cannot prevent the issue.

It was found that the fix for CVE-2018-14648 in 389-ds-base, versions 1.4.0.x before 1.4.0.17, was incorrectly applied in RHEL 7.5. An attacker would still be able to provoke excessive CPU consumption leading to a denial of service.

Dell PowerScale OneFS, versions 8.2.0.x-9.4.0.x contain allocation of Resources Without Limits or Throttling vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to denial of service and performance issue on that node.

A denial of service vulnerability was identified in GitLab CE/EE, affecting all versions from 15.11 prior to 16.6.7, 16.7 prior to 16.7.5 and 16.8 prior to 16.8.2 which allows an attacker to spike the GitLab instance resource usage resulting in service degradation.

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

A possibility of unwanted server memory consumption was detected through the obsolete functionalities in the Rest API methods of the M-Files server before 23.11.13156.0 which allows attackers to execute DoS attacks.

An issue was discovered in GitLab Community and Enterprise Edition before 11.1.7, 11.2.x before 11.2.4, and 11.3.x before 11.3.1. The diff formatter using rouge can block for a long time in Sidekiq jobs without any timeout.

A flaw was found in CRI-O that involves an experimental annotation leading to a container being unconfined. This may allow a pod to specify and get any amount of memory/cpu, circumventing the kubernetes scheduler and potentially resulting in a denial of service in the node.

HashiCorp Vault and Vault Enterprise 1.12.0 and newer are vulnerable to a denial of service through memory exhaustion of the host when handling large unauthenticated and authenticated HTTP requests from a client. Vault will attempt to map the request to memory, resulting in the exhaustion of available memory on the host, which may cause Vault to crash. Fixed in Vault 1.15.4, 1.14.8, 1.13.12.

Allocation of Resources Without Limits or Throttling vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.7, from 10.1.0-M1 through 10.1.41, from 9.0.0.M1 through 9.0.105. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.8, 10.1.42 or 9.0.106, which fix the issue.

To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1.

Mattermost fails to enforce a limit for the size of the cache entry for OpenGraph data allowing an attacker to send a specially crafted request to the /api/v4/opengraph filling the cache and turning the server unavailable.

Allocation of Resources Without Limits or Throttling in GitHub repository ikus060/rdiffweb prior to 2.4.8.

Allocation of Resources Without Limits or Throttling in GitHub repository ikus060/rdiffweb prior to 2.5.0a3.

Discourse is the an open source discussion platform. In affected versions an email activation route can be abused to send mass spam emails. A fix has been included in the latest stable, beta and tests-passed versions of Discourse which rate limits emails. Users are advised to upgrade. Users unable to upgrade should manually rate limit email.

Allocation of Resources Without Limits or Throttling in GitHub repository ikus060/rdiffweb prior to 2.4.8.

Fileszie Check vulnerabilities allow a malicious user to bypass size limits or overload to the product.  Affected products: ABB ASPECT - Enterprise v3.08.02; NEXUS Series v3.08.02; MATRIX Series v3.08.02

If Apache HTTP Server 2.4.53 is configured to do transformations with mod_sed in contexts where the input to mod_sed may be very large, mod_sed may make excessively large memory allocations and trigger an abort.

A malicious client can send many DNS messages over TCP, potentially causing the server to become unstable while the attack is in progress. The server may recover after the attack ceases. Use of ACLs will not mitigate the attack. This issue affects BIND 9 versions 9.18.1 through 9.18.27, 9.19.0 through 9.19.24, and 9.18.11-S1 through 9.18.27-S1.

The AP4_CttsAtom class in Core/Ap4CttsAtom.cpp in Bento4 1.5.1.0 allows remote attackers to cause a denial of service (application crash), related to a memory allocation failure, as demonstrated by mp2aac.

Hyperium Hyper before 0.14.19 does not allow for customization of the max_header_list_size method in the H2 third-party software, allowing attackers to perform HTTP2 attacks.

Reader.Read does not set a limit on the maximum size of file headers. A maliciously crafted archive could cause Read to allocate unbounded amounts of memory, potentially causing resource exhaustion or panics. After fix, Reader.Read limits the maximum size of header blocks to 1 MiB.