IBM Security Access Manager Container 10.0.0.0 through 10.0.6.1 temporarily stores sensitive information in files that could be accessed by a local user. IBM X-Force ID: 254657.

IBM InfoSphere Information Server 11.7 could allow a local user to obtain sensitive information from a log files. IBM X-Force ID: 246463.

IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite Software 1.10.12.0 through 1.10.22.0 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 281429.

IBM Security Key Lifecycle Manager 3.0 and 3.0.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 166627.

IBM QRadar Suite Software 1.10.12.0 through 1.10.23.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 281430.

IBM InfoSphere Information Server 11.7 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 244373.

IBM Java Security Components in IBM SDK, Java Technology Edition 8 before SR1 FP10, 7 R1 before SR3 FP10, 7 before SR9 FP10, 6 R1 before SR8 FP7, 6 before SR16 FP7, and 5.0 before SR16 FP13 stores plaintext information in memory dumps, which allows local users to obtain sensitive information by reading a file.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix leak of blob encryption key Trusted keys unseal the key blob on load, but keep the sealed payload in the blob field so that every subsequent read (export) will simply convert this field to hex and send it to userspace. With DCP-based trusted keys, we decrypt the blob encryption key (BEK) in the Kernel due hardware limitations and then decrypt the blob payload. BEK decryption is done in-place which means that the trusted key blob field is modified and it consequently holds the BEK in plain text. Every subsequent read of that key thus send the plain text BEK instead of the encrypted BEK to userspace. This issue only occurs when importing a trusted DCP-based key and then exporting it again. This should rarely happen as the common use cases are to either create a new trusted key and export it, or import a key blob and then just use it without exporting it again. Fix this by performing BEK decryption and encryption in a dedicated buffer. Further always wipe the plain text BEK buffer to prevent leaking the key via uninitialized memory.

IBM UrbanCode Deploy (UCD) 6.2.7.15, 7.0.5.10, 7.1.2.6, and 7.2.2.1 could disclose sensitive database information to a local user in plain text. IBM X-Force ID: 221008.

IBM Security Verify Governance 10.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 225232.

IBM Spectrum Protect Operations Center 8.1.12 and 8.1.13 could allow a local attacker to obtain sensitive information, caused by plain text user account passwords potentially being stored in the browser's application command history. By accessing browser history, an attacker could exploit this vulnerability to obtain other user accounts' passwords. IBM X-Force ID: 226322.

IBM Spectrum Protect Client 8.1.0.0 through 8.1.14.0 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 225886.

IBM MQ 7.5, 8.0, 9.0 LTS, 9.1 CD, and 9.1 LTS stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 211403.

IBM Cognos Analytics 11.1.7, 11.2.0, and 11.2.1 stores user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 213554.

IBM Jazz for Service Management 1.1.3.10 and IBM Tivoli Netcool/OMNIbus_GUI displays user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 207610.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 could disclose highly sensitive information to a local user due to inproper storage of a plaintext cryptographic key. IBM X-Force ID: 198187.

IBM UrbanCode Deploy (UCD) 6.2.7.9, 7.0.5.4, and 7.1.1.1 stores user credentials in plain in clear text which can be read by a local user. IBM X-Force ID: 190908.

IBM StoredIQ 7.6.0.17 through 7.6.0.20 could disclose sensitive information to a local user due to data in certain directories not being encrypted when it contained symbolic links. IBM X-Force ID: 175133.

IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 stores highly sensitive information in cleartext that could be obtained by a user. IBM X-Force ID: 179004.

IBM UrbanCode Deploy (UCD) 7.0.3.0, 7.0.4.0, 7.0.5.3, 7.0.5.4, 7.1.0.0, 7.1.1.0, 7.1.1.1, and 7.1.1.2, stores keystore passwords in plain text after a manual edit, which can be read by a local user. IBM X-Force ID: 191944.

Insertion of Sensitive Information into Log File vulnerability in Hitachi Ops Center Administrator on Linux allows local users  to gain sensitive information.This issue affects Hitachi Ops Center Administrator: before 10.9.3-00.

When Akka HTTP before 10.5.2 accepts file uploads via the FileUploadDirectives.fileUploadAll directive, the temporary file it creates has too weak permissions: it is readable by other users on Linux or UNIX, a similar issue to CVE-2022-41946.

IBM Security Verify Access 10.0.0 through 10.0.7.1 could allow a local user to obtain sensitive information from trace logs. IBM X-Force ID: 252183.

IBM Datacap 9.1.7, 9.1.8, and 9.1.9 and IBM Datacap Navigator 9.1.7, 9.1.8, and 9.1.9 allows an attacker to retrieve user passwords and cryptographic keys from memory. Attacker can use the same keys to decrypt password, gain access to the application and access sensitive data in the database.

A known cache speculation vulnerability, known as Branch History Injection (BHI) or Spectre-BHB, becomes actual again for the new hw AmpereOne. Spectre-BHB is similar to Spectre v2, except that malicious code uses the shared branch history (stored in the CPU Branch History Buffer, or BHB) to influence mispredicted branches within the victim's hardware context. Once that occurs, speculation caused by the mispredicted branches can cause cache allocation. This issue leads to obtaining information that should not be accessible.

IBM Security Access Manager Container (IBM Security Verify Access Appliance 10.0.0.0 through 10.0.6.1 and IBM Security Verify Access Docker 10.0.6.1) temporarily stores sensitive information in files that could be accessed by a local user. IBM X-Force ID: 254653.

Exposure of sensitive information to an unauthorized actor in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allow an authenticated user to potentially enable information disclosure via local access.

IBM Sterling Secure Proxy 6.0.3 and 6.1.0 could allow a local user with specific information about the system to obtain privileged information due to inadequate memory clearing during operations. IBM X-Force ID: 252139.

IBM MQ 8.0, 9.0, 9.1, 9.2, and 9.3 could disclose sensitive user information from a trace file if that functionality has been enabled. IBM X-Force ID: 251358.

IBM MQ 8.0, 9.0, and 9.1 could allow a local user to obtain sensitive credential information when a detailed technical error message is returned in a stack trace. IBM X-Force ID: 250398.

IBM Watson CloudPak for Data Data Stores information disclosure 4.6.0 allows web pages to be stored locally which can be read by another user on the system. IBM X-Force ID: 248947.

IBM Db2 for i 7.2, 7.3, 7.4, and 7.5 supplies user defined table function is vulnerable to user enumeration by a local authenticated attacker, without having authority to the related *USRPRF objects. This can be used by a malicious actor to gather information about users that can be targeted in further attacks. IBM X-Force ID: 287174.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.8 and 6.1.0.0 through 6.1.2.1 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 247034.

IBM Security Guardium Key Lifecycle Manager 3.0, 3.0.1, 4.0, 4.1, and 4.1.1 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 247601.

Signal Desktop before 6.2.0 on Windows, Linux, and macOS allows an attacker to obtain potentially sensitive attachments sent in messages from the attachments.noindex directory. Cached attachments are not effectively cleared. In some cases, even after a self-initiated file deletion, an attacker can still recover the file if it was previously replied to in a conversation. (Local filesystem access is needed by the attacker.) NOTE: the vendor disputes the relevance of this finding because the product is not intended to protect against adversaries with this degree of local access.

IBM API Connect 2018.1 through 2018.4.1.7 Developer Portal's user registration page does not disable password autocomplete. An attacker with access to the browser instance and local system credentials can steal the credentials used for registration. IBM X-Force ID: 163453.

IBM TRIRIGA Application Platform 3.5.3 and 3.6.0 may disclose sensitive information only available to a local user that could be used in further attacks against the system. IBM X-Force ID: 159148.

IBM App Connect Enterprise 13.0.1.0 through 13.0.7.0 stores potentially sensitive information in log files that could be read by a local user.

IBM Cloud Orchestrator 2.4 through 2.4.0.5 and 2.5 through 2.5.0.9 could allow a local user to obtain sensitive information from temporary script files. IBM X-Force ID: 162333.

The private key for the IBM Storage Protect Plus Server 10.1.0 through 10.1.16 certificate can be disclosed, undermining the security of the certificate. IBM X-Force ID: 285205.

IBM Watson Studio Local 1.2.3 stores key files in the user's home directory which could be obtained by another local user. IBM X-Force ID: 161413.

In the Linux kernel, the following vulnerability has been resolved: libbpf: Fix accessing BTF.ext core_relo header Update btf_ext_parse_info() to ensure the core_relo header is present before reading its fields. This avoids a potential buffer read overflow reported by the OSS Fuzz project.

IBM Cognos Controller 10.2.0, 10.2.1, 10.3.0, 10.3.1, and 10.4.0 allows web pages to be stored locally which can be read by another user on the system. IBM X-Force ID: 158879.

IBM Robotic Process Automation with Automation Anywhere 11 could allow a local user to obtain highly sensitive information from log files when debugging is enabled. IBM X-Force ID: 160765.

IBM InfoSphere Information Server 11.7.0.0 through 11.7.1.6 product stores user credentials and other sensitive information in plain text which can be read by a local user.

IBM Concert 1.0.0 through 2.2.0 could allow a local user to obtain sensitive information due to missing function level access control.

IBM MQ LTS 9.1.0.0 through 9.1.0.29, 9.2.0.0 through 9.2.0.36, 9.3.0.0 through 9.3.0.30 and 9.4.0.0 through 9.4.0.12 and IBM MQ CD 9.3.0.0 through 9.3.5.1 and 9.4.0.0 through 9.4.3.0  Java and JMS stores a password in client configuration files when trace is enabled which can be read by a local user.

IBM QRadar SIEM 7.5.0 through 7.5.0 Update Package 14 stores potentially sensitive information in configuration files that could be read by a local user.

IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.1 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 281677.

IBM Concert Software 1.0.0 through 2.0.0 could allow a local user to obtain sensitive information from buffers due to improper clearing of heap memory before release.