The affected products expose an unauthenticated Telnet-based command line interface that could allow an attacker to modify hardware configurations, manipulate data, or factory reset the device.

By default, the Packet Power Monitoring and Control Web Interface do not enforce authentication mechanisms. This vulnerability could allow unauthorized users to access and manipulate monitoring and control functions.

WebITR developed by Uniong has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to log into the system as arbitrary users by exploiting a specific functionality.

A security issue exists due to improper handling of malformed CIP Forward Close packets during fuzzing. The controller enters a solid red Fault LED state and becomes unresponsive. Upon power cycle, the controller will enter recoverable fault where the MS LED and Fault LED become flashing red and reports fault code 0xF015. To recover, clear the fault.

Remote Control Server, maintained by Steppschuh, 3.1.1.12 allows unauthenticated remote code execution when authentication is disabled, which is the default configuration. The server exposes a custom UDP-based control protocol that accepts remote keyboard input events without verification. An attacker on the same network can issue a sequence of keystroke commands to launch a system shell and execute arbitrary commands, resulting in full system compromise.

A remote code execution vulnerability exists within osCommerce Online Merchant version 2.3.4.1 due to insecure default configuration and missing authentication in the installer workflow. By default, the /install/ directory remains accessible after installation. An unauthenticated attacker can invoke install_4.php, submit crafted POST data, and inject arbitrary PHP code into the configure.php file. When the application later includes this file, the injected payload is executed, resulting in full server-side compromise.

The embedded web server on the thermostat listed version ranges contain a vulnerability that allows unauthenticated attackers, either on the local area network or from the Internet via a router with port forwarding set up, to gain direct access to the thermostat's embedded web server and reset user credentials by manipulating specific elements of the embedded web interface.

A missing authentication for critical function vulnerability in the client application of Soar Cloud HRD Human Resource Management System through version 7.3.2025.0408 allows remote attackers to bypass authentication and access application functions.

Dover Fueling Solutions ProGauge MagLink LX Consoles expose an undocumented and unauthenticated target communication framework (TCF) interface on a specific port. Files can be created, deleted, or modified, potentially leading to remote code execution.

A device takeover vulnerability exists in the Rockwell Automation Power Monitor 1000. This vulnerability allows configuration of a new Policyholder user without any authentication via API. Policyholder user is the most privileged user that can perform edit operations, creating admin users and performing factory reset.

CVE-2024-10386 IMPACT An authentication vulnerability exists in the affected product. The vulnerability could allow a threat actor with network access to send crafted messages to the device, potentially resulting in database manipulation.

A Missing Authentication for Critical Function vulnerability in SUSE Manager allows anyone with access to the websocket at /rhn/websocket/minion/remote-commands to execute arbitrary commands as root. This issue affects Container suse/manager/5.0/x86_64/server:5.0.5.7.30.1: from ? before 0.3.7-150600.3.6.2; Container suse/manager/5.0/x86_64/server:5.0.5.7.30.1: from ? before 5.0.14-150600.4.17.1; Container suse/manager/5.0/x86_64/server:5.0.5.7.30.1: from ? before 5.0.14-150600.4.17.1; Image SLES15-SP4-Manager-Server-4-3-BYOS: from ? before 4.3.33-150400.3.55.2; Image SLES15-SP4-Manager-Server-4-3-BYOS: from ? before 4.3.33-150400.3.55.2; Image SLES15-SP4-Manager-Server-4-3-BYOS-Azure: from ? before 4.3.33-150400.3.55.2; Image SLES15-SP4-Manager-Server-4-3-BYOS-Azure: from ? before 4.3.33-150400.3.55.2; Image SLES15-SP4-Manager-Server-4-3-BYOS-EC2: from ? before 4.3.33-150400.3.55.2; Image SLES15-SP4-Manager-Server-4-3-BYOS-EC2: from ? before 4.3.33-150400.3.55.2; Image SLES15-SP4-Manager-Server-4-3-BYOS-GCE: from ? before 4.3.33-150400.3.55.2; Image SLES15-SP4-Manager-Server-4-3-BYOS-GCE: from ? before 4.3.33-150400.3.55.2; SUSE Manager Server Module 4.3: from ? before 0.3.7-150400.3.39.4; SUSE Manager Server Module 4.3: from ? before 4.3.33-150400.3.55.2; SUSE Manager Server Module 4.3: from ? before 4.3.33-150400.3.55.2.

WGS-80HPT-V2 and WGS-4215-8T2S are missing authentication that could allow an attacker to create an administrator account without knowing any existing credentials.

The web management interface of Okcat Parking Management Platform from ZONG YU has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to directly access system functions. These functions include opening gates, viewing license plates and parking records, and restarting the system.

The web management interface of Okcat Parking Management Platform from ZONG YU has an Arbitrary File Upload vulnerability, allowing unauthenticated remote attackers to upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server.

A vulnerability has been identified in SINEC NMS (All versions < V4.0). The affected application exposes an endpoint that allows an unauthorized modification of administrative credentials. This could allow an unauthenticated attacker to reset the superadmin password and gain full control of the application (ZDI-CAN-26569).

Unrestricted file upload in TCMAN's GIM v11. This vulnerability allows an unauthenticated attacker to upload any file within the server, even a malicious file to obtain a Remote Code Execution (RCE).

An unauthenticated arbitrary file upload vulnerability exists in Tiki Wiki CMS Groupware version 15.1 and earlier via the ELFinder component's default connector (connector.minimal.php), which allows remote attackers to upload and execute malicious PHP scripts in the context of the web server. The vulnerable component does not enforce file type validation, allowing attackers to craft a POST request to upload executable PHP payloads through the ELFinder interface exposed at /vendor_extra/elfinder/.

A remote code execution vulnerability exists in CryptoLog (PHP version, discontinued since 2009) due to a chained exploitation of SQL injection and command injection vulnerabilities. An unauthenticated attacker can gain shell access as the web server user by first exploiting a SQL injection flaw in login.php to bypass authentication, followed by command injection in logshares_ajax.php to execute arbitrary operating system commands. The login bypass is achieved by submitting crafted SQL via the user POST parameter. Once authenticated, the attacker can abuse the lsid POST parameter in the logshares_ajax.php endpoint to inject and execute a command using $(...) syntax, resulting in code execution under the web context. This exploitation path does not exist in the ASP.NET version of CryptoLog released since 2009.

An unauthenticated command injection vulnerability exists in Serviio Media Server versions 1.4 through 1.8 on Windows, in the /rest/action API endpoint exposed by the console component (default port 23423). The checkStreamUrl method accepts a VIDEO parameter that is passed unsanitized to a call to cmd.exe, enabling arbitrary command execution under the privileges of the web server. No authentication is required to exploit this issue, as the REST API is exposed by default and lacks access controls.

An unauthenticated command injection vulnerability exists in VICIdial versions 2.9 RC1 through 2.13 RC1, within the vicidial_sales_viewer.php component when password encryption is enabled (a non-default configuration). The application improperly passes the HTTP Basic Authentication password directly to a call to exec() without adequate sanitation. This allows remote attackers to inject and execute arbitrary operating system commands as the web server user. NOTE: This vulnerability was mitigated in 2017.

An unauthenticated arbitrary file upload vulnerability exists in Idera Up.Time Monitoring Station versions up to and including 7.2. The `wizards/post2file.php` script accepts arbitrary POST parameters, allowing attackers to upload crafted PHP files to the webroot. Successful exploitation results in remote code execution as the web server user. NOTE: The bypass for this vulnerability is tracked as CVE-2015-9263.

A remote code execution vulnerability exists in multiple Netcore and Netis routers models with firmware released prior to August 2014 due to the presence of an undocumented backdoor listener on UDP port 53413. Exact version boundaries remain undocumented. An unauthenticated remote attacker can send specially crafted UDP packets to execute arbitrary commands on the affected device. This backdoor uses a hardcoded authentication mechanism and accepts shell commands post-authentication. Some device models include a non-standard implementation of the `echo` command, which may affect exploitability.

An unauthenticated remote command execution vulnerability exists in Samsung WLAN AP WEA453e firmware prior to version 5.2.4.T1 via improper input validation in the “Tech Support” diagnostic functionality. The command1 and command2 POST or GET parameters accept arbitrary shell commands that are executed with root privileges on the underlying operating system. An attacker can exploit this by crafting a request that injects shell commands to create output files in writable directories and then access their contents via the download endpoint. This flaw allows complete compromise of the device without authentication.

A command injection vulnerability exists in LILIN Digital Video Recorder (DVR) devices prior to firmware version 2.0b60_20200207 via the Server field in the NTPUpdate configuration. The web service at /z/zbin/dvr_box fails to properly sanitize input, allowing remote attackers to inject and execute arbitrary commands as root by supplying specially crafted XML data to the DVRPOST interface. 777

An unauthenticated OS command injection vulnerability exists within Xdebug versions 2.5.5 and earlier, a PHP debugging extension developed by Derick Rethans. When remote debugging is enabled, Xdebug listens on port 9000 and accepts debugger protocol commands without authentication. An attacker can send a crafted eval command over this interface to execute arbitrary PHP code, which may invoke system-level functions such as system() or passthru(). This results in full compromise of the host under the privileges of the web server user.

An unauthenticated command injection vulnerability exists in WePresent WiPG-1000 firmware versions prior to 2.2.3.0, due to improper input handling in the undocumented /cgi-bin/rdfs.cgi endpoint. The Client parameter is not sanitized before being passed to a system call, allowing an unauthenticated remote attacker to execute arbitrary commands as the web server user.

An unauthenticated remote code execution vulnerability exists in Remote for Mac, a macOS remote control utility developed by Aexol Studio, in versions up to and including 2025.7. When the application is configured with authentication disabled (i.e., the "Allow unknown devices" option is enabled), the /api/executeScript endpoint is exposed without access control. This allows unauthenticated remote attackers to inject arbitrary AppleScript payloads via the X-Script HTTP header, resulting in code execution using do shell script. Successful exploitation grants attackers the ability to run arbitrary commands on the macOS host with the privileges of the Remote for Mac background process.

Burk Technology ARC Solo's password change mechanism can be utilized without proper authentication procedures, allowing an attacker to take over the device. A password change request can be sent directly to the device's HTTP endpoint without providing valid credentials. The system does not enforce proper authentication or session validation, allowing the password change to proceed without verifying the request's legitimacy.

Volt is an elegantly crafted functional API for Livewire. Malicious, user-crafted request payloads could potentially lead to remote code execution within Volt components. This vulnerability is fixed in 1.7.0.

An attacker could modify or disable settings, disrupt fuel monitoring and supply chain operations, leading to disabling of ATG monitoring. This would result in potential safety hazards in fuel storage and transportation.

An OS command injection vulnerability exists in MiniDVBLinux version 5.4 and earlier. The system’s web-based management interface fails to properly sanitize user-supplied input before passing it to operating system commands. A remote unauthenticated attacker can exploit this vulnerability to execute arbitrary commands as the root user, potentially compromising the entire device.

An unrestricted file upload vulnerability exists in Dell (acquired by Quest) KACE K1000 System Management Appliance version 5.0 - 5.3, 5.4 prior to 5.4.76849, and 5.5 prior to 5.5.90547 in the download_agent.php endpoint. An attacker can upload arbitrary PHP files to a temporary web-accessible directory, which are later executed through inclusion in backend code that loads files under attacker-controlled paths.

A stack-based buffer overflow vulnerability in the my_cgi.cgi component of certain D-Link devices, including the DSP-W215 version 1.02, can be exploited via a specially crafted HTTP POST request to the /common/info.cgi endpoint. This flaw enables an unauthenticated attacker to achieve remote code execution with system-level privileges.

Certain functionality within GMOD Apollo does not require authentication when passed with an administrative username

A remote code execution vulnerability exists in HybridAuth versions 2.0.9 through 2.2.2 due to insecure use of the install.php installation script. The script remains accessible after deployment and fails to sanitize input before writing to the application’s config.php file. An unauthenticated attacker can inject arbitrary PHP code into config.php, which is later executed when the file is loaded. This allows attackers to achieve remote code execution on the server. Exploitation of this issue will overwrite the existing configuration, rendering the application non-functional.

CL4/6NX Plus and CL4/6NX-J Plus (Japan model) with the firmware versions prior to 1.15.5-r1 allow crafted dangerous files to be uploaded. An arbitrary Lua script may be executed on the system with the root privilege.

Instantel Micromate lacks authentication on a configuration port which could allow an attacker to execute commands if connected.

The Dingtian DT-R0 Series is vulnerable to an exploit that allows attackers to bypass login requirements by directly navigating to the main page.

An unauthenticated arbitrary file upload vulnerability exists in LibrettoCMS version 1.1.7 (and possibly earlier) contains an unauthenticated arbitrary file upload vulnerability in its File Manager plugin. The upload handler located at adm/ui/js/ckeditor/plugins/pgrfilemanager/php/upload.php fails to properly validate file extensions, allowing attackers to upload files with misleading extensions and subsequently rename them to executable .php scripts. This enables remote code execution on the server without authentication.

An unrestricted file upload vulnerability exists in MiniWeb HTTP Server <= Build 300 that allows unauthenticated remote attackers to upload arbitrary files to the server’s filesystem. By abusing the upload handler and crafting a traversal path, an attacker can place a malicious .exe in system32, followed by a .mof file in the WMI directory. This triggers execution of the payload with SYSTEM privileges via the Windows Management Instrumentation service. The exploit is only viable on Windows versions prior to Vista.

CWE-20: Improper Input Validation vulnerability exists that could lead to a denial of service and a loss of confidentiality, integrity of the controller when an unauthenticated crafted Modbus packet is sent to the device.

An unauthenticated arbitrary file upload vulnerability exists in Havalite CMS version 1.1.7 (and possibly earlier) in the upload.php script. The application fails to enforce proper file extension validation and authentication checks, allowing remote attackers to upload malicious PHP files via a crafted multipart/form-data POST request. Once uploaded, the attacker can access the file directly under havalite/tmp/files/, resulting in remote code execution.

OMNTEC Proteus Tank Monitoring OEL8000III Series could allow an attacker to perform administrative actions without proper authentication.

Auxilium RateMyPet contains an unauthenticated arbitrary file upload vulnerability in upload_banners.php. The banner upload feature fails to validate file types or enforce authentication, allowing remote attackers to upload malicious PHP files. These files are stored in a web-accessible /banners/ directory and can be executed directly, resulting in remote code execution.

The administrative interface listens by default on all interfaces on a TCP port and does not require authentication when being accessed.

The Tauri shell plugin allows access to the system shell. Prior to 2.2.1, the Tauri shell plugin exposes functionality to execute code and open programs on the system. The open endpoint of this plugin is designed to allow open functionality with the system opener (e.g. xdg-open on Linux). This was meant to be restricted to a reasonable number of protocols like https or mailto by default. This default restriction was not functional due to improper validation of the allowed protocols, allowing for potentially dangerous protocols like file://, smb://, or nfs:// and others to be opened by the system registered protocol handler. By passing untrusted user input to the open endpoint these potentially dangerous protocols can be abused to gain remote code execution on the system. This either requires direct exposure of the endpoint to application users or code execution in the frontend of a Tauri application. This vulnerability is fixed in 2.2.1.

An unauthenticated arbitrary file upload vulnerability exists in FlashChat versions 6.0.2 and 6.0.4 through 6.0.8. The upload.php endpoint fails to properly validate file types and authentication, allowing attackers to upload malicious PHP scripts. Once uploaded, these scripts can be executed remotely, resulting in arbitrary code execution as the web server user.

An unrestricted file upload vulnerability exists in Kaseya KServer versions prior to 6.3.0.2. The uploadImage.asp endpoint allows unauthenticated users to upload files to arbitrary paths via a crafted filename parameter in a multipart/form-data POST request. Due to the lack of authentication and input sanitation, an attacker can upload a file with an .asp extension to a web-accessible directory, which can then be invoked to execute arbitrary code with the privileges of the IUSR account. The vulnerability enables remote code execution without prior authentication and was resolved in version 6.3.0.2 by removing the vulnerable uploadImage.asp endpoint.

CuteFlow version 2.11.2 and earlier contains an arbitrary file upload vulnerability in the restart_circulation_values_write.php script. The application fails to validate or restrict uploaded file types, allowing unauthenticated attackers to upload arbitrary PHP files to the upload/___1/ directory. These files are then accessible via the web server, enabling remote code execution.