D-Link Nuclias Connect firmware versions <= 1.3.1.4 contain an observable response discrepancy vulnerability. The application's 'Login' endpoint returns distinct JSON responses depending on whether the supplied username is associated with an existing account. Because the responses differ in the `error.message`string value, an unauthenticated remote attacker can enumerate valid usernames/accounts on the server. NOTE: D-Link states that a fix is under development.

An information disclosure in web interface in D-Link DIR-X1860 before 1.03 RevA1 allows a remote unauthenticated attacker to send a specially crafted HTTP request and gain knowledge of different absolute paths that are being used by the web application.

A vulnerability has been found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. This vulnerability affects the function sub_41F0FC of the file /H5/webgl.data. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /install_base.data. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, has been found in D-Link DI-7003GV2 24.04.18D1 R(68125). This issue affects some unknown processing of the file /H5/get_version.data of the component Configuration Handler. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, was found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected is an unknown function of the file /index.data. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as problematic has been found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. This affects an unknown part of the file /xml/info.xml of the component HTTP GET Request Handler. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DAP-1360, DIR-300, DIR-615, DIR-615GF, DIR-615S, DIR-615T, DIR-620, DIR-620S, DIR-806A, DIR-815, DIR-815AC, DIR-815S, DIR-816, DIR-820, DIR-822, DIR-825, DIR-825AC, DIR-825ACF, DIR-825ACG1, DIR-841, DIR-842, DIR-842S, DIR-843, DIR-853, DIR-878, DIR-882, DIR-1210, DIR-1260, DIR-2150, DIR-X1530, DIR-X1860, DSL-224, DSL-245GR, DSL-2640U, DSL-2750U, DSL-G2452GR, DVG-5402G, DVG-5402G, DVG-5402GFRU, DVG-N5402G, DVG-N5402G-IL, DWM-312W, DWM-321, DWR-921, DWR-953 and Good Line Router v2 up to 20240112. This vulnerability affects unknown code of the file /devinfo of the component HTTP GET Request Handler. The manipulation of the argument area with the input notice|net|version leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251542 is the identifier assigned to this vulnerability.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DIR-859 1.06B01. It has been rated as critical. Affected by this issue is some unknown functionality of the file /hedwig.cgi of the component HTTP POST Request Handler. The manipulation of the argument service with the input ../../../../htdocs/webinc/getcfg/DHCPS6.BRIDGE-1.xml leads to path traversal. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-251666 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A security flaw has been discovered in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected is the function Webdav_Access_List of the file /cgi-bin/file_center.cgi. Performing a manipulation of the argument cmd results in improper access controls. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK An Information Disclosure vulnerability exists due to a failure to restrict access on the lums.cgi script when processing a live video stream in D-LINK WCS-1100 1.02, TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-7510 1.00, DCS-7410 1.00, DCS-6410 1.00, DCS-5635 1.01, DCS-5605 1.01, DCS-5230L 1.02, DCS-5230 1.02, DCS-3430 1.02, DCS-3411 1.02, DCS-3410 1.02, DCS-2121 1.06_FR, DCS-2121 1.06, DCS-2121 1.05_RU, DCS-2102 1.06_FR, DCS-2102 1.06, DCS-2102 1.05_RU, DCS-1130L 1.04, DCS-1130 1.04_US, DCS-1130 1.03, DCS-1100L 1.04, DCS-1100 1.04_US, and DCS-1100 1.03, which could let a malicious user obtain sensitive information. which could let a malicious user obtain sensitive information.

An Authentication vulnerability exists in D-LINK WCS-1100 1.02, TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-7510 1.00, DCS-7410 1.00, DCS-6410 1.00, DCS-5635 1.01, DCS-5605 1.01, DCS-5230L 1.02, DCS-5230 1.02, DCS-3430 1.02, DCS-3411 1.02, DCS-3410 1.02, DCS-2121 1.06_FR, DCS-2121 1.06, DCS-2121 1.05_RU, DCS-2102 1.06_FR, DCS-2102 1.06, DCS-2102 1.05_RU, DCS-1130L 1.04, DCS-1130 1.04_US, DCS-1130 1.03, DCS-1100L 1.04, DCS-1100 1.04_US, and DCS-1100 1.03 due to hard-coded credentials that serve as a backdoor, which allows remote attackers to access the RTSP video stream.

An Authentication Bypass vulnerability exists in upnp/asf-mp4.asf when streaming live video in D-Link TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-2121 1.06_FR, 1.06, and 1.05_RU, DCS-2102 1.06_FR. 1.06, and 1.05_RU, which could let a malicious user obtain sensitive information.

Insecure default credentials for the Adminsitrator account of D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 allows attackers to escalate privileges via a bruteforce attack.

Incorrect access control in the Maintenance module of D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 allows authenticated attackers with low-level privileges to arbitrarily change the high-privileged account passwords and escalate privileges.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DNS-320L, DNS-320LW and DNS-327L up to 20240403 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/info.cgi of the component HTTP GET Request Handler. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-259285 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A vulnerability was identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The impacted element is the function cgi_get_ipv6 of the file /cgi-bin/network_mgr.cgi. Such manipulation leads to improper access controls. The exploit is publicly available and might be used.

A vulnerability was detected in D-Link DIR-803 up to 1.04. Impacted is an unknown function of the file /getcfg.php of the component Configuration Handler. The manipulation of the argument AUTHORIZED_GROUP results in information disclosure. The attack may be performed from remote. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in D-Link DIR-852 up to 1.00CN B09. Affected by this vulnerability is the function phpcgi_main of the file /getcfg.php of the component Device Configuration Handler. Such manipulation leads to information disclosure. The attack may be performed from remote. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as problematic has been found in D-Link DIR-878 1.03. Affected is an unknown function of the file /dllog.cgi of the component HTTP POST Request Handler. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, was found in D-Link DNS-320 2.02b01. This affects an unknown part of the file /cgi-bin/discovery.cgi of the component Web Management Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

An access control issue in the component form2PortriggerRule.cgi of D-Link 816A2_FWv1.10CNB05_R1B011D88210 allows unauthenticated attackers to set the port trigger of the device via a crafted POST request.

An access control issue in the component form2alg.cgi of D-Link 816A2_FWv1.10CNB05_R1B011D88210 allows unauthenticated attackers to set the agl service of the device via a crafted POST request.

Several web interfaces in D-Link DIR-868LW 1.12b have no authentication requirements for access, allowing for attackers to obtain users' DNS query history.

D-Link R15 before v1.08.02 was discovered to contain no firewall restrictions for IPv6 traffic. This allows attackers to arbitrarily access any services running on the device that may be inadvertently listening via IPv6.

A weakness has been identified in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. The affected element is an unknown function of the component DHCP Client Information Handler. Executing a manipulation can lead to information disclosure. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. Impacted is an unknown function of the component Wifi Setting Handler. Performing a manipulation results in information disclosure. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A security vulnerability has been detected in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. The impacted element is an unknown function of the file /wan_connection_status.asp of the component DHCP Connection Status Handler. The manipulation leads to information disclosure. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as problematic, has been found in D-Link DI-7003GV2 24.04.18D1 R(68125). Affected by this issue is the function sub_48F4F0 of the file /H5/versionupdate.data. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-7003GV2 24.04.18D1 R(68125) and classified as problematic. Affected by this issue is some unknown functionality of the file /login.data. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Umbraco is an ASP.NET content management system. Umbraco 10 prior to 10.8.4 with access to the native login screen is vulnerable to a possible user enumeration attack. This issue was fixed in version 10.8.5. As a workaround, one may disable the native login screen by exclusively using external logins.

Raytha CMS is vulnerable to User Enumeration in password reset functionality. Difference in messages could allow an attacker to determine if the login is valid or not, enabling a brute force attack with valid logins. This issue was fixed in version 1.5.0.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

HCL Aftermarket EPC is vulnerable to attack since It was found that a malicious actor can use brute-force techniques to either guess or confirm valid users in the system. Use renumeration is when a malicious actor can use brute-force techniques to either guess or confirm valid users in a system

A Observable Response Discrepancy vulnerability in spacewalk-java of SUSE Manager Server 4.1, SUSE Manager Server 4.2 allows remote attackers to discover valid usernames. This issue affects: SUSE Manager Server 4.1 spacewalk-java versions prior to 4.1.46-1. SUSE Manager Server 4.2 spacewalk-java versions prior to 4.2.37-1.

This admin plugin for Grav is an HTML user interface that provides a convenient way to configure Grav and easily create and modify pages. Prior to 1.11.0-beta.1, a user enumeration and email disclosure vulnerability exists in Grav. The "Forgot Password" functionality at /admin/forgot leaks information about valid usernames and their associated email addresses through distinct server responses. This allows an attacker to enumerate users and disclose sensitive email addresses, which can be leveraged for targeted attacks such as password spraying, phishing, or social engineering. This vulnerability is fixed in 1.11.0-beta.1.

Piwigo is an open source photo gallery application for the web. In version 15.5.0 and likely earlier 15.x releases, the password reset functionality in Piwigo allows an unauthenticated attacker to determine whether a given username or email address exists in the system. The endpoint at password.php?action=lost returns distinct messages for valid vs. invalid accounts, enabling user enumeration. As of time of publication, no known patches are available.

Pega Platform versions 7.1.0 through Infinity 25.1.0 are affected by a User Enumeration. This issue occurs during user authentication process, where a difference in response time could allow a remote unauthenticated user to determine if a username is valid or not. This only applies to deprecated basic-authentication feature and other more secure authentication mechanisms are recommended. A fix is being provided in the 24.1.4, 24.2.4, and 25.1.1 patch releases. Please note: Basic credentials authentication service type is deprecated started in 24.2 version: https://docs.pega.com/bundle/platform/page/platform/release-notes/security/whats-new-security-242.html.

The Frontier Airlines website has a publicly available endpoint that validates if an email addresses is associated with an account. An unauthenticated, remote attacker could determine valid email addresses, possibly aiding in further attacks.

DokuWiki 2018-04-22b contains a username enumeration vulnerability in its password reset functionality that allows attackers to identify valid user accounts. Attackers can submit different usernames to the password reset endpoint and distinguish between existing and non-existing accounts by analyzing the server's error response messages.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to enumerate usernames due to an observable discrepancy between login attempts.

Cloud Native Computing Foundation Harbor before 1.10.3 and 2.x before 2.0.1 allows resource enumeration because unauthenticated API calls reveal (via the HTTP status code) whether a resource exists.

A vulnerability in the web-based management interface of Cisco&nbsp;ECE could allow an unauthenticated, remote attacker to perform a username enumeration attack against an affected device. This vulnerability is due to differences in authentication responses that are sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to an affected device. A successful exploit could allow the attacker to confirm existing user accounts, which could be used in further attacks. Cisco&nbsp;has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Saleor is an e-commerce platform. Starting in version 3.21.0 and prior to version 3.21.16, requesting certain fields in the response of `accountRegister` may result in errors that could unintentionally reveal whether a user with the provided email already exists in Saleor. Version 3.21.16 fixes the issue. As a workaround, rate-limit the mutation to reduce the impact.

Trivision NC-227WF firmware 5.80 (build 20141010) login mechanism reveals whether a username exists or not by returning different error messages ("Unknown user" vs. "Wrong password"), allowing an attacker to enumerate valid usernames.

All CODESYS Visualization versions before V4.2.0.0 generate a login dialog vulnerable to information exposure allowing a remote, unauthenticated attacker to enumerate valid users.

A vulnerability in Qlik Sense Enterprise on Windows could allow an remote attacker to enumerate domain user accounts. An attacker could exploit this vulnerability by sending authentication requests to an affected system. A successful exploit could allow the attacker to compare the response time that are returned by the affected system to determine which accounts are valid user accounts. Affected systems are only vulnerable if they have LDAP configured. The affected URI is /internal_forms_authentication/ the response time of the form is longer if the supplied user does not exists and shorter if the user exists.

OPEXUS FOIAXpress Public Access Link (PAL) version v11.1.0 allows an unauthenticated, remote attacker to query the /App/CreateRequest.aspx endpoint to check for the existence of valid usernames. There are no rate-limiting mechanisms in place.

Tuleap is an Open Source Suite created to facilitate management of software development and collaboration. In Tuleap Community Edition prior to version 16.9.99.1750843170 and Tuleap Enterprise Edition prior to 16.8-4 and 16.9-2, the forgot password form allows for user enumeration. This is fixed in Tuleap Community Edition version 16.9.99.1750843170 and Tuleap Enterprise Edition 16.8-4 and 16.9-2.