In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix use of completion ctx after free On admin queue completion handling, if the admin command completed with error we print data from the completion context. The issue is that we already freed the completion context in polling/interrupts handler which means we print data from context in an unknown state (it might be already used again). Change the admin submission flow so alloc/dealloc of the context will be symmetric and dealloc will be called after any potential use of the context.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix use-after-free in timeout object destroy nft_ct_timeout_obj_destroy() frees the timeout object with kfree() immediately after nf_ct_untimeout(), without waiting for an RCU grace period. Concurrent packet processing on other CPUs may still hold RCU-protected references to the timeout object obtained via rcu_dereference() in nf_ct_timeout_data(). Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer freeing until after an RCU grace period, matching the approach already used in nfnetlink_cttimeout.c. KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns

In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix tx.buf use-after-free in isotp_sendmsg() isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix use-after-free in migration restore When an error is returned from xe_sriov_pf_migration_restore_produce(), the data pointer is not set to NULL, which can trigger use-after-free in subsequent .write() calls. Set the pointer to NULL upon error to fix the problem. (cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence from amdgpu_ib_schedule(). This fence is used to wait for job completion. Currently, the code drops the fence reference using dma_fence_put() before calling dma_fence_wait(). If dma_fence_put() releases the last reference, the fence may be freed before dma_fence_wait() is called. This can lead to a use-after-free. Fix this by waiting on the fence first and releasing the reference only after dma_fence_wait() completes. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696) (cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482)

In the Linux kernel, the following vulnerability has been resolved: futex: Require sys_futex_requeue() to have identical flags Nicholas reported that his LLM found it was possible to create a UaF when sys_futex_requeue() is used with different flags. The initial motivation for allowing different flags was the variable sized futex, but since that hasn't been merged (yet), simply mandate the flags are identical, as is the case for the old style sys_futex() requeue operations.

In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable.

In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix NTMP DMA use-after-free issue The AI-generated review reported a potential DMA use-after-free issue [1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending command is not explicitly aborted, while ntmp_free_data_mem() unconditionally frees the DMA buffer. If the buffer has already been reallocated elsewhere, this may lead to silent memory corruption. Because the hardware eventually processes the pending command and perform a DMA write of the response to the physical address of the freed buffer. To resolve this issue, this patch does the following modifications: 1. Convert cbdr->ring_lock from a spinlock to a mutex The lock was originally a spinlock in case NTMP operations might be invoked from atomic context. After downstream support for all NTMP tables, no such usage has materialized. A mutex lock is now required because the driver now needs to reclaim used BDs and release associated DMA memory within the lock's context, while dma_free_coherent() might sleep. 2. Introduce software command BD (struct netc_swcbd) The hardware write-back overwrites the addr and len fields of the BD, so the driver cannot rely on the hardware BD to free the associated DMA memory. The driver now maintains a software shadow BD storing the DMA buffer pointer, DMA address, and size. And netc_xmit_ntmp_cmd() only reclaims older BDs when the number of used BDs reaches NETC_CBDR_CLEAN_WORK (16). The software BD enables correct DMA memory release. With this, struct ntmp_dma_buf and ntmp_free_data_mem() are no longer needed and are removed. 3. Require callers to hold ring_lock across netc_xmit_ntmp_cmd() netc_xmit_ntmp_cmd() releases the ring_lock before the caller finishes consuming the response. At this point, if a concurrent thread submits a new command, it may trigger ntmp_clean_cbdr() and free the DMA buffer while it is still in use. Move ring_lock ownership to the caller to ensure the response buffer cannot be reclaimed prematurely. So the helpers ntmp_select_and_lock_cbdr() and ntmp_unlock_cbdr() are added. These changes eliminate the DMA use-after-free condition and ensure safe and consistent BD reclamation and DMA buffer lifecycle management.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not skip unrelated mode changes in DSC validation Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs with DSC-independent mode changes. In turn, amdgpu_dm_commit_streams() will never release the old stream, resulting in a memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to the new stream either, which manifests as a use-after-free when the stream gets disabled later on: BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu] Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977 Workqueue: events drm_mode_rmfb_work_fn Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980 Since there is no reliable way of figuring out whether a CRTC has unrelated mode changes pending at the time of DSC validation, remember the value of the mode_changed flag from before the point where a CRTC was marked as potentially affected by a change in DSC configuration. Reset the mode_changed flag to this earlier value instead in pre_validate_dsc(). (cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)

In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix use-after-free on disconnect In usb6fire_chip_abort(), the chip struct is allocated as the card's private data (via snd_card_new with sizeof(struct sfire_chip)). When snd_card_free_when_closed() is called and no file handles are open, the card and embedded chip are freed synchronously. The subsequent chip->card = NULL write then hits freed slab memory. Call trace: usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline] usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182 usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458 ... hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953 Fix by moving the card lifecycle out of usb6fire_chip_abort() and into usb6fire_chip_disconnect(). The card pointer is saved in a local before any teardown, snd_card_disconnect() is called first to prevent new opens, URBs are aborted while chip is still valid, and snd_card_free_when_closed() is called last so chip is never accessed after the card may be freed.

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free in bond_xmit_broadcast() bond_xmit_broadcast() reuses the original skb for the last slave (determined by bond_is_last_slave()) and clones it for others. Concurrent slave enslave/release can mutate the slave list during RCU-protected iteration, changing which slave is "last" mid-loop. This causes the original skb to be double-consumed (double-freed). Replace the racy bond_is_last_slave() check with a simple index comparison (i + 1 == slaves_count) against the pre-snapshot slave count taken via READ_ONCE() before the loop. This preserves the zero-copy optimization for the last slave while making the "last" determination stable against concurrent list mutations. The UAF can trigger the following crash: ================================================================== BUG: KASAN: slab-use-after-free in skb_clone Read of size 8 at addr ffff888100ef8d40 by task exploit/147 CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334) bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593) dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887) __dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838) ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136) ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219) ip6_output (net/ipv6/ip6_output.c:250) ip6_send_skb (net/ipv6/ip6_output.c:1985) udp_v6_send_skb (net/ipv6/udp.c:1442) udpv6_sendmsg (net/ipv6/udp.c:1733) __sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Allocated by task 147: Freed by task 147: The buggy address belongs to the object at ffff888100ef8c80 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 192 bytes inside of freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60) Memory state around the buggy address: ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ==================================================================

In the Linux kernel, the following vulnerability has been resolved: writeback: Fix use after free in inode_switch_wbs_work_fn() inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... } Now adding of items to the list looks like: wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work); Because inode_switch_wbs_work_fn() loops when processing isw items, it can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is empty. This is a problem because in that case wb can get freed (no isw items -> no wb reference) while the work is still pending causing use-after-free issues. We cannot just fix this by cancelling work when freeing wb because that could still trigger problematic 0 -> 1 transitions on wb refcount due to wb_get() in inode_switch_wbs_work_fn(). It could be all handled with more careful code but that seems unnecessarily complex so let's avoid that until it is proven that the looping actually brings practical benefit. Just remove the loop from inode_switch_wbs_work_fn() instead. That way when wb_queue_isw() queues work, we are guaranteed we have added the first item to wb->switch_wbs_ctxs and nobody is going to remove it (and drop the wb reference it holds) until the queued work runs.

In the Linux kernel, the following vulnerability has been resolved: driver core: platform: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove().

In the Linux kernel, the following vulnerability has been resolved: can: raw: fix ro->uniq use-after-free in raw_rcv() raw_release() unregisters raw CAN receive filters via can_rx_unregister(), but receiver deletion is deferred with call_rcu(). This leaves a window where raw_rcv() may still be running in an RCU read-side critical section after raw_release() frees ro->uniq, leading to a use-after-free of the percpu uniq storage. Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific socket destructor. can_rx_unregister() takes an extra reference to the socket and only drops it from the RCU callback, so freeing uniq from sk_destruct ensures the percpu area is not released until the relevant callbacks have drained. [mkl: applied manually]

In the Linux kernel, the following vulnerability has been resolved: media: as102: fix to not free memory after the device is registered in as102_usb_probe() In as102_usb driver, the following race condition occurs: ``` CPU0 CPU1 as102_usb_probe() kzalloc(); // alloc as102_dev_t .... usb_register_dev(); fd = sys_open("/path/to/dev"); // open as102 fd .... usb_deregister_dev(); .... kfree(); // free as102_dev_t .... sys_close(fd); as102_release() // UAF!! as102_usb_release() kfree(); // DFB!! ``` When a USB character device registered with usb_register_dev() is later unregistered (via usb_deregister_dev() or disconnect), the device node is removed so new open() calls fail. However, file descriptors that are already open do not go away immediately: they remain valid until the last reference is dropped and the driver's .release() is invoked. In as102, as102_usb_probe() calls usb_register_dev() and then, on an error path, does usb_deregister_dev() and frees as102_dev_t right away. If userspace raced a successful open() before the deregistration, that open FD will later hit as102_release() --> as102_usb_release() and access or free as102_dev_t again, occur a race to use-after-free and double-free vuln. The fix is to never kfree(as102_dev_t) directly once usb_register_dev() has succeeded. After deregistration, defer freeing memory to .release(). In other words, let release() perform the last kfree when the final open FD is closed.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/stat: deallocate damon_call() failure leaking damon_ctx damon_stat_start() always allocates the module's damon_ctx object (damon_stat_context). Meanwhile, if damon_call() in the function fails, the damon_ctx object is not deallocated. Hence, if the damon_call() is failed, and the user writes Y to “enabled” again, the previously allocated damon_ctx object is leaked. This cannot simply be fixed by deallocating the damon_ctx object when damon_call() fails. That's because damon_call() failure doesn't guarantee the kdamond main function, which accesses the damon_ctx object, is completely finished. In other words, if damon_stat_start() deallocates the damon_ctx object after damon_call() failure, the not-yet-terminated kdamond could access the freed memory (use-after-free). Fix the leak while avoiding the use-after-free by keeping returning damon_stat_start() without deallocating the damon_ctx object after damon_call() failure, but deallocating it when the function is invoked again and the kdamond is completely terminated. If the kdamond is not yet terminated, simply return -EAGAIN, as the kdamond will soon be terminated. The issue was discovered [1] by sashiko.

In the Linux kernel, the following vulnerability has been resolved: xfs: save ailp before dropping the AIL lock in push callbacks In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock is dropped to perform buffer IO. Once the cluster buffer no longer protects the log item from reclaim, the log item may be freed by background reclaim or the dquot shrinker. The subsequent spin_lock() call dereferences lip->li_ailp, which is a use-after-free. Fix this by saving the ailp pointer in a local variable while the AIL lock is held and the log item is guaranteed to be valid.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: add flush_workqueue to prevent uaf Our detector found a concurrent use-after-free bug when detaching an NCI device. The main reason for this bug is the unexpected scheduling between the used delayed mechanism (timer and workqueue). The race can be demonstrated below: Thread-1 Thread-2 | nci_dev_up() | nci_open_device() | __nci_request(nci_reset_req) | nci_send_cmd | queue_work(cmd_work) nci_unregister_device() | nci_close_device() | ... del_timer_sync(cmd_timer)[1] | ... | Worker nci_free_device() | nci_cmd_work() kfree(ndev)[3] | mod_timer(cmd_timer)[2] In short, the cleanup routine thought that the cmd_timer has already been detached by [1] but the mod_timer can re-attach the timer [2], even it is already released [3], resulting in UAF. This UAF is easy to trigger, crash trace by POC is like below [ 66.703713] ================================================================== [ 66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490 [ 66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33 [ 66.703974] [ 66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5 [ 66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work [ 66.703974] Call Trace: [ 66.703974] <TASK> [ 66.703974] dump_stack_lvl+0x57/0x7d [ 66.703974] print_report.cold+0x5e/0x5db [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] kasan_report+0xbe/0x1c0 [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] enqueue_timer+0x448/0x490 [ 66.703974] __mod_timer+0x5e6/0xb80 [ 66.703974] ? mark_held_locks+0x9e/0xe0 [ 66.703974] ? try_to_del_timer_sync+0xf0/0xf0 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [ 66.703974] ? queue_work_on+0x61/0x80 [ 66.703974] ? lockdep_hardirqs_on+0xbf/0x130 [ 66.703974] process_one_work+0x8bb/0x1510 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 66.703974] ? pwq_dec_nr_in_flight+0x230/0x230 [ 66.703974] ? rwlock_bug.part.0+0x90/0x90 [ 66.703974] ? _raw_spin_lock_irq+0x41/0x50 [ 66.703974] worker_thread+0x575/0x1190 [ 66.703974] ? process_one_work+0x1510/0x1510 [ 66.703974] kthread+0x2a0/0x340 [ 66.703974] ? kthread_complete_and_exit+0x20/0x20 [ 66.703974] ret_from_fork+0x22/0x30 [ 66.703974] </TASK> [ 66.703974] [ 66.703974] Allocated by task 267: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] __kasan_kmalloc+0x81/0xa0 [ 66.703974] nci_allocate_device+0xd3/0x390 [ 66.703974] nfcmrvl_nci_register_dev+0x183/0x2c0 [ 66.703974] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 66.703974] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 66.703974] tty_ioctl+0x764/0x1310 [ 66.703974] __x64_sys_ioctl+0x122/0x190 [ 66.703974] do_syscall_64+0x3b/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 66.703974] [ 66.703974] Freed by task 406: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] kasan_set_track+0x21/0x30 [ 66.703974] kasan_set_free_info+0x20/0x30 [ 66.703974] __kasan_slab_free+0x108/0x170 [ 66.703974] kfree+0xb0/0x330 [ 66.703974] nfcmrvl_nci_unregister_dev+0x90/0xd0 [ 66.703974] nci_uart_tty_close+0xdf/0x180 [ 66.703974] tty_ldisc_kill+0x73/0x110 [ 66.703974] tty_ldisc_hangup+0x281/0x5b0 [ 66.703974] __tty_hangup.part.0+0x431/0x890 [ 66.703974] tty_release+0x3a8/0xc80 [ 66.703974] __fput+0x1f0/0x8c0 [ 66.703974] task_work_run+0xc9/0x170 [ 66.703974] exit_to_user_mode_prepare+0x194/0x1a0 [ 66.703974] syscall_exit_to_user_mode+0x19/0x50 [ 66.703974] do_syscall_64+0x48/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix stale file descriptors on failed usercopy A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded.

In the Linux kernel, the following vulnerability has been resolved: mm: blk-cgroup: fix use-after-free in cgwb_release_workfn() cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last reference, the blkcg can be freed asynchronously (css_free_rwork_fn -> blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the pointer to access blkcg->online_pin, resulting in a use-after-free: BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) Write of size 4 at addr ff11000117aa6160 by task kworker/71:1/531 Workqueue: cgwb_release cgwb_release_workfn Call Trace: <TASK> blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) cgwb_release_workfn (mm/backing-dev.c:629) process_scheduled_works (kernel/workqueue.c:3278 kernel/workqueue.c:3385) Freed by task 1016: kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6246 mm/slub.c:6561) css_free_rwork_fn (kernel/cgroup/cgroup.c:5542) process_scheduled_works (kernel/workqueue.c:3302 kernel/workqueue.c:3385) ** Stack based on commit 66672af7a095 ("Add linux-next specific files for 20260410") I am seeing this crash sporadically in Meta fleet across multiple kernel versions. A full reproducer is available at: https://github.com/leitao/debug/blob/main/reproducers/repro_blkcg_uaf.sh (The race window is narrow. To make it easily reproducible, inject a msleep(100) between css_put() and blkcg_unpin_online() in cgwb_release_workfn(). With that delay and a KASAN-enabled kernel, the reproducer triggers the splat reliably in less than a second.) Fix this by moving blkcg_unpin_online() before css_put(), so the cgwb's CSS reference keeps the blkcg alive while blkcg_unpin_online() accesses it.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete This fixes the condition checking so mgmt_pending_valid is executed whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd) would kfree(cmd) without unlinking it from the list first, leaving a dangling pointer. Any subsequent list traversal (e.g., mgmt_pending_foreach during __mgmt_power_off, or another mgmt_pending_valid call) would dereference freed memory.

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix potential use-after-free during probe Kasan has reported the following use after free on dev->iommu. when a device probe fails and it is in process of freeing dev->iommu in dev_iommu_free function, a deferred_probe_work_func runs in parallel and tries to access dev->iommu->fwspec in of_iommu_configure path thus causing use after free. BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4 Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x33c show_stack+0x18/0x24 dump_stack_lvl+0x16c/0x1e0 print_address_description+0x84/0x39c __kasan_report+0x184/0x308 kasan_report+0x50/0x78 __asan_load8+0xc0/0xc4 of_iommu_configure+0xb4/0x4a4 of_dma_configure_id+0x2fc/0x4d4 platform_dma_configure+0x40/0x5c really_probe+0x1b4/0xb74 driver_probe_device+0x11c/0x228 __device_attach_driver+0x14c/0x304 bus_for_each_drv+0x124/0x1b0 __device_attach+0x25c/0x334 device_initial_probe+0x24/0x34 bus_probe_device+0x78/0x134 deferred_probe_work_func+0x130/0x1a8 process_one_work+0x4c8/0x970 worker_thread+0x5c8/0xaec kthread+0x1f8/0x220 ret_from_fork+0x10/0x18 Allocated by task 1: ____kasan_kmalloc+0xd4/0x114 __kasan_kmalloc+0x10/0x1c kmem_cache_alloc_trace+0xe4/0x3d4 __iommu_probe_device+0x90/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Freed by task 1: kasan_set_track+0x4c/0x84 kasan_set_free_info+0x28/0x4c ____kasan_slab_free+0x120/0x15c __kasan_slab_free+0x18/0x28 slab_free_freelist_hook+0x204/0x2fc kfree+0xfc/0x3a4 __iommu_probe_device+0x284/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Fix this by setting dev->iommu to NULL first and then freeing dev_iommu structure in dev_iommu_free function.

In the Linux kernel, the following vulnerability has been resolved: iwlwifi: fix use-after-free If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix trace_marker copy link list updates When the "copy_trace_marker" option is enabled for an instance, anything written into /sys/kernel/tracing/trace_marker is also copied into that instances buffer. When the option is set, that instance's trace_array descriptor is added to the marker_copies link list. This list is protected by RCU, as all iterations uses an RCU protected list traversal. When the instance is deleted, all the flags that were enabled are cleared. This also clears the copy_trace_marker flag and removes the trace_array descriptor from the list. The issue is after the flags are called, a direct call to update_marker_trace() is performed to clear the flag. This function returns true if the state of the flag changed and false otherwise. If it returns true here, synchronize_rcu() is called to make sure all readers see that its removed from the list. But since the flag was already cleared, the state does not change and the synchronization is never called, leaving a possible UAF bug. Move the clearing of all flags below the updating of the copy_trace_marker option which then makes sure the synchronization is performed. Also use the flag for checking the state in update_marker_trace() instead of looking at if the list is empty.

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free in em28xx_v4l2_open() em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock, creating a race with em28xx_v4l2_init()'s error path and em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct and set dev->v4l2 to NULL under dev->lock. This race leads to two issues: - use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler, since the video_device is embedded in the freed em28xx_v4l2 struct. - NULL pointer dereference in em28xx_resolution_set() when accessing v4l2->norm, since dev->v4l2 has been set to NULL. Fix this by moving the mutex_lock() before the dev->v4l2 read and adding a NULL check for dev->v4l2 under the lock.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix use-after-free and race in fastrpc_map_find Currently, there is a race window between the point when the mutex is unlocked in fastrpc_map_lookup and the reference count increasing (fastrpc_map_get) in fastrpc_map_find, which can also lead to use-after-free. So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us to both protect the maps list by also taking the &fl->lock spinlock and the reference count, since the spinlock will be released only after. Add take_ref argument to make this suitable for all callers.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io() The xfstests case "generic/107" and syzbot have both reported a NULL pointer dereference. The concurrent scenario that triggers the panic is as follows: F2FS_WB_CP_DATA write callback umount - f2fs_write_checkpoint - f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA) - blk_mq_end_request - bio_endio - f2fs_write_end_io : dec_page_count(sbi, F2FS_WB_CP_DATA) : wake_up(&sbi->cp_wait) - kill_f2fs_super - kill_block_super - f2fs_put_super : iput(sbi->node_inode) : sbi->node_inode = NULL : f2fs_in_warm_node_list - is_node_folio // sbi->node_inode is NULL and panic The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is decremented to zero. As a result, f2fs_in_warm_node_list() may dereference a NULL node_inode when checking whether a folio belongs to the node inode, leading to a panic. This patch fixes the issue by calling f2fs_in_warm_node_list() before decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the use-after-free condition.

In the Linux kernel, the following vulnerability has been resolved: nvdimm/bus: Fix potential use after free in asynchronous initialization Dingisoul with KASAN reports a use after free if device_add() fails in nd_async_device_register(). Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while scheduling async init") correctly added a reference on the parent device to be held until asynchronous initialization was complete. However, if device_add() results in an allocation failure the ref count of the device drops to 0 prior to the parent pointer being accessed. Thus resulting in use after free. The bug bot AI correctly identified the fix. Save a reference to the parent pointer to be used to drop the parent reference regardless of the outcome of device_add().

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Flush anchored URBs in usbtmc_release When calling usbtmc_release, pending anchored URBs must be flushed or killed to prevent use-after-free errors (e.g. in the HCD giveback path). Call usbtmc_draw_down() to allow anchored URBs to be completed.

In the Linux kernel, the following vulnerability has been resolved: net: fix fanout UAF in packet_release() via NETDEV_UP race `packet_release()` has a race window where `NETDEV_UP` can re-register a socket into a fanout group's `arr[]` array. The re-registration is not cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout array. `packet_release()` does NOT zero `po->num` in its `bind_lock` section. After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex` still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)` that already found the socket in `sklist` can re-register the hook. For fanout sockets, this re-registration calls `__fanout_link(sk, po)` which adds the socket back into `f->arr[]` and increments `f->num_members`, but does NOT increment `f->sk_ref`. The fix sets `po->num` to zero in `packet_release` while `bind_lock` is held to prevent NETDEV_UP from linking, preventing the race window. This bug was found following an additional audit with Claude Code based on CVE-2025-38617.

In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices.

In the Linux kernel, the following vulnerability has been resolved: bcache: fix cached_dev.sb_bio use-after-free and crash In our production environment, we have received multiple crash reports regarding libceph, which have caught our attention: ``` [6888366.280350] Call Trace: [6888366.280452] blk_update_request+0x14e/0x370 [6888366.280561] blk_mq_end_request+0x1a/0x130 [6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd] [6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd] [6888366.280903] __complete_request+0x22/0x70 [libceph] [6888366.281032] osd_dispatch+0x15e/0xb40 [libceph] [6888366.281164] ? inet_recvmsg+0x5b/0xd0 [6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph] [6888366.281405] ceph_con_process_message+0x79/0x140 [libceph] [6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph] [6888366.281661] ceph_con_workfn+0x329/0x680 [libceph] ``` After analyzing the coredump file, we found that the address of dc->sb_bio has been freed. We know that cached_dev is only freed when it is stopped. Since sb_bio is a part of struct cached_dev, rather than an alloc every time. If the device is stopped while writing to the superblock, the released address will be accessed at endio. This patch hopes to wait for sb_write to complete in cached_dev_free. It should be noted that we analyzed the cause of the problem, then tell all details to the QWEN and adopted the modifications it made.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY, as documented in mm/filemap.c: "If our return value has VM_FAULT_RETRY set, it's because the mmap_lock may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()." When this happens, a concurrent munmap() can call remove_vma() and free the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call dereferences it -- a use-after-free. Fix this by saving ip_blkno as a plain integer before calling filemap_fault(), and removing vma from the trace event. Since ip_blkno is copied by value before the lock can be dropped, it remains valid regardless of what happens to the vma or inode afterward.

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on disconnect The vub300 driver maintains an explicit reference count for the controller and its driver data and the last reference can in theory be dropped after the driver has been unbound. This specifically means that the controller allocation must not be device managed as that can lead to use-after-free. Note that the lifetime is currently also incorrectly tied the parent USB device rather than interface, which can lead to memory leaks if the driver is unbound without its device being physically disconnected (e.g. on probe deferral). Fix both issues by reverting to non-managed allocation of the controller.

An issue was discovered in the Linux kernel before 5.0.19. The XFRM subsystem has a use-after-free, related to an xfrm_state_fini panic, aka CID-dbb2483b2a46.

The block subsystem in the Linux kernel before 5.2 has a use-after-free that can lead to arbitrary code execution in the kernel context and privilege escalation, aka CID-c3e2219216c9. This is related to blk_mq_free_rqs and blk_cleanup_queue.

In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free if write is called after disconnect If a user writes to the chardev after disconnect has been called, the kernel panics with the following trace (with CONFIG_INIT_ON_FREE_DEFAULT_ON=y): BUG: kernel NULL pointer dereference, address: 0000000000000218 ... Call Trace: <TASK> gb_operation_create_common+0x61/0x180 gb_operation_create_flags+0x28/0xa0 gb_operation_sync_timeout+0x6f/0x100 raw_write+0x7b/0xc7 [gb_raw] vfs_write+0xcf/0x420 ? task_mm_cid_work+0x136/0x220 ksys_write+0x63/0xe0 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f Disconnect calls gb_connection_destroy, which ends up freeing the connection object. When gb_operation_sync is called in the write file operations, its gets a freed connection as parameter and the kernel panics. The gb_connection_destroy cannot be moved out of the disconnect function, as the Greybus subsystem expect all connections belonging to a bundle to be destroyed when disconnect returns. To prevent this bug, use a rw lock to synchronize access between write and disconnect. This guarantees that the write function doesn't try to use a disconnected connection.

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put().

In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free on cdev close This addresses a use-after-free bug when a raw bundle is disconnected but its chardev is still opened by an application. When the application releases the cdev, it causes the following panic when init on free is enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y): refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130 ... Call Trace: <TASK> cdev_put+0x18/0x30 __fput+0x255/0x2a0 __x64_sys_close+0x3d/0x80 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f The cdev is contained in the "gb_raw" structure, which is freed in the disconnect operation. When the cdev is released at a later time, cdev_put gets an address that points to freed memory. To fix this use-after-free, convert the struct device from a pointer to being embedded, that makes the lifetime of the cdev and of this device the same. Then, use cdev_device_add, which guarantees that the device won't be released until all references to the cdev have been released. Finally, delegate the freeing of the structure to the device release function, instead of freeing immediately in the disconnect callback.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair) sock_hold(sk_pair) // UaF More practically, this fix guarantees that the iterator program is consistently provided with a unix socket that remains stable during iterator execution. [1]: BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490 Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231 Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx() Fix the race by pruning the bin while still holding xfrm_policy_lock, before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since the lock is already held. The wrapper xfrm_policy_inexact_prune_bin() becomes unused and is removed. Race: CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO) ========================== ========================== xfrm_policy_bysel_ctx(): spin_lock_bh(xfrm_policy_lock) bin = xfrm_policy_inexact_lookup() __xfrm_policy_unlink(pol) spin_unlock_bh(xfrm_policy_lock) xfrm_policy_kill(ret) // wide window, lock not held xfrm_hash_rebuild(): spin_lock_bh(xfrm_policy_lock) __xfrm_policy_inexact_flush(): kfree_rcu(bin) // bin freed spin_unlock_bh(xfrm_policy_lock) xfrm_policy_inexact_prune_bin(bin) // UAF: bin is freed

In the Linux kernel, the following vulnerability has been resolved: i2c: Fix a potential use after free Free the adap structure only after we are done using it. This patch just moves the put_device() down a bit to avoid the use after free. [wsa: added comment to the code, added Fixes tag]

In the Linux kernel, the following vulnerability has been resolved: vdpa: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: bpf: fix mm lifecycle in open-coded task_vma iterator The open-coded task_vma iterator reads task->mm locklessly and acquires mmap_read_trylock() but never calls mmget(). If the task exits concurrently, the mm_struct can be freed as it is not SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free. Safely read task->mm with a trylock on alloc_lock and acquire an mm reference. Drop the reference via bpf_iter_mmput_async() in _destroy() and error paths. bpf_iter_mmput_async() is a local wrapper around mmput_async() with a fallback to mmput() on !CONFIG_MMU. Reject irqs-disabled contexts (including NMI) up front. Operations used by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async) take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from NMI or from a tracepoint that fires with those locks held could deadlock. A trylock on alloc_lock is used instead of the blocking task_lock() (get_task_mm) to avoid a deadlock when a softirq BPF program iterates a task that already holds its alloc_lock on the same CPU.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8)

In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Fix potential use-after-free in get_timestamp Move the phc->active check and resp pointer assignment to after acquiring the spinlock. Previously, phc->active was checked without holding the lock, and resp was cached from ena_dev->phc.virt_addr before the lock was acquired. If ena_com_phc_destroy() runs between the lockless active check and the lock acquisition, it sets active=false, releases the lock, frees the DMA memory, and sets virt_addr=NULL. The get_timestamp path would then read a NULL virt_addr and dereference it. With both the active check and the pointer read under the lock, destroy cannot free the memory while get_timestamp is using it.

In the Linux kernel, the following vulnerability has been resolved: net: ibm: emac: Fix use-after-free during device removal The driver was using devm_register_netdev() which causes unregister_netdev() to be deferred until the devres cleanup phase, which runs after emac_remove() returns. This creates a use-after-free window where: 1. emac_remove() is called, which tears down hardware (cancels work, detaches modules, unregisters from MAL) 2. emac_remove() returns 3. devres cleanup runs and finally calls unregister_netdev() During step 3, the network stack might still process packets, triggering emac_irq(), emac_poll(), or other handlers that access now-freed hardware resources (dev->emacp, dev->mal, etc.). Fix this by replacing devm_register_netdev() with manual register_netdev() and calling unregister_netdev() at the beginning of emac_remove(), before any hardware teardown. This ensures the network device is fully stopped and unregistered before hardware resources are released. The change is safe because: - dev->ndev is assigned very early in probe (before any error paths that could bypass emac_remove) - platform_set_drvdata() is only called after successful registration, so emac_remove() only runs for fully registered devices - unregister_netdev() is idempotent and safe to call on any registered device

In the Linux kernel, the following vulnerability has been resolved: drm/xe/eustall: Fix drm_dev_put called before stream disable in close In xe_eu_stall_stream_close(), drm_dev_put() is called before the stream is disabled and its resources are freed. If this drops the last reference, the device structures could be freed while the subsequent cleanup code still accesses them, leading to a use-after-free. Fix this by moving drm_dev_put() after all device accesses are complete. This matches the ordering in xe_oa_release(). (cherry picked from commit 35aff528f7297e949e5e19c9cd7fd748cf1cf21c)