In the Linux kernel, the following vulnerability has been resolved: mtd: lpddr2_nvm: Fix possible null-ptr-deref It will cause null-ptr-deref when resource_size(add_range) invoked, if platform_get_resource() returns NULL.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix a null-ptr-deref in tipc_topsrv_accept syzbot found a crash in tipc_topsrv_accept: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] Workqueue: tipc_rcv tipc_topsrv_accept RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487 Call Trace: <TASK> tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 It was caused by srv->listener that might be set to null by tipc_topsrv_stop() in net .exit whereas it's still used in tipc_topsrv_accept() worker. srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to avoid the null-ptr-deref. To ensure the lsock is not released during the tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop() where it's waiting until the tipc_topsrv_accept worker to be done. Note that sk_callback_lock is used to protect sk->sk_user_data instead of srv->listener, and it should check srv in tipc_topsrv_listener_data_ready() instead. This also ensures that no more tipc_topsrv_accept worker will be started after tipc_conn_close() is called in tipc_topsrv_stop() where it sets sk->sk_user_data to null.

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: megachips: Fix a null pointer dereference bug When removing the module we will get the following warning: [ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered [ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI [ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130 [ 31.921825] Call Trace: [ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw] [ 31.923139] i2c_device_remove+0x181/0x1f0 The two bridges (stdp2690, stdp4028) do not probe at the same time, so the driver does not call ge_b850v3_resgiter() when probing, causing the driver to try to remove the object that has not been initialized. Fix this by checking whether both the bridges are probed.

In the Linux kernel, the following vulnerability has been resolved: net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory Fixes the below NULL pointer dereference: [...] [ 14.471200] Call Trace: [ 14.471562] <TASK> [ 14.471882] lock_acquire+0x245/0x2e0 [ 14.472416] ? remove_wait_queue+0x12/0x50 [ 14.473014] ? _raw_spin_lock_irqsave+0x17/0x50 [ 14.473681] _raw_spin_lock_irqsave+0x3d/0x50 [ 14.474318] ? remove_wait_queue+0x12/0x50 [ 14.474907] remove_wait_queue+0x12/0x50 [ 14.475480] sk_stream_wait_memory+0x20d/0x340 [ 14.476127] ? do_wait_intr_irq+0x80/0x80 [ 14.476704] do_tcp_sendpages+0x287/0x600 [ 14.477283] tcp_bpf_push+0xab/0x260 [ 14.477817] tcp_bpf_sendmsg_redir+0x297/0x500 [ 14.478461] ? __local_bh_enable_ip+0x77/0xe0 [ 14.479096] tcp_bpf_send_verdict+0x105/0x470 [ 14.479729] tcp_bpf_sendmsg+0x318/0x4f0 [ 14.480311] sock_sendmsg+0x2d/0x40 [ 14.480822] ____sys_sendmsg+0x1b4/0x1c0 [ 14.481390] ? copy_msghdr_from_user+0x62/0x80 [ 14.482048] ___sys_sendmsg+0x78/0xb0 [ 14.482580] ? vmf_insert_pfn_prot+0x91/0x150 [ 14.483215] ? __do_fault+0x2a/0x1a0 [ 14.483738] ? do_fault+0x15e/0x5d0 [ 14.484246] ? __handle_mm_fault+0x56b/0x1040 [ 14.484874] ? lock_is_held_type+0xdf/0x130 [ 14.485474] ? find_held_lock+0x2d/0x90 [ 14.486046] ? __sys_sendmsg+0x41/0x70 [ 14.486587] __sys_sendmsg+0x41/0x70 [ 14.487105] ? intel_pmu_drain_pebs_core+0x350/0x350 [ 14.487822] do_syscall_64+0x34/0x80 [ 14.488345] entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] The test scenario has the following flow: thread1 thread2 ----------- --------------- tcp_bpf_sendmsg tcp_bpf_send_verdict tcp_bpf_sendmsg_redir sock_close tcp_bpf_push_locked __sock_release tcp_bpf_push //inet_release do_tcp_sendpages sock->ops->release sk_stream_wait_memory // tcp_close sk_wait_event sk->sk_prot->close release_sock(__sk); *** lock_sock(sk); __tcp_close sock_orphan(sk) sk->sk_wq = NULL release_sock **** lock_sock(__sk); remove_wait_queue(sk_sleep(sk), &wait); sk_sleep(sk) //NULL pointer dereference &rcu_dereference_raw(sk->sk_wq)->wait While waiting for memory in thread1, the socket is released with its wait queue because thread2 has closed it. This caused by tcp_bpf_send_verdict didn't increase the f_count of psock->sk_redir->sk_socket->file in thread1. We should check if SOCK_DEAD flag is set on wakeup in sk_stream_wait_memory before accessing the wait queue.

In the Linux kernel, the following vulnerability has been resolved: soundwire: revisit driver bind/unbind and callbacks In the SoundWire probe, we store a pointer from the driver ops into the 'slave' structure. This can lead to kernel oopses when unbinding codec drivers, e.g. with the following sequence to remove machine driver and codec driver. /sbin/modprobe -r snd_soc_sof_sdw /sbin/modprobe -r snd_soc_rt711 The full details can be found in the BugLink below, for reference the two following examples show different cases of driver ops/callbacks being invoked after the driver .remove(). kernel: BUG: kernel NULL pointer dereference, address: 0000000000000150 kernel: Workqueue: events cdns_update_slave_status_work [soundwire_cadence] kernel: RIP: 0010:mutex_lock+0x19/0x30 kernel: Call Trace: kernel: ? sdw_handle_slave_status+0x426/0xe00 [soundwire_bus 94ff184bf398570c3f8ff7efe9e32529f532e4ae] kernel: ? newidle_balance+0x26a/0x400 kernel: ? cdns_update_slave_status_work+0x1e9/0x200 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82] kernel: BUG: unable to handle page fault for address: ffffffffc07654c8 kernel: Workqueue: pm pm_runtime_work kernel: RIP: 0010:sdw_bus_prep_clk_stop+0x6f/0x160 [soundwire_bus] kernel: Call Trace: kernel: <TASK> kernel: sdw_cdns_clock_stop+0xb5/0x1b0 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82] kernel: intel_suspend_runtime+0x5f/0x120 [soundwire_intel aca858f7c87048d3152a4a41bb68abb9b663a1dd] kernel: ? dpm_sysfs_remove+0x60/0x60 This was not detected earlier in Intel tests since the tests first remove the parent PCI device and shut down the bus. The sequence above is a corner case which keeps the bus operational but without a driver bound. While trying to solve this kernel oopses, it became clear that the existing SoundWire bus does not deal well with the unbind case. Commit 528be501b7d4a ("soundwire: sdw_slave: add probe_complete structure and new fields") added a 'probed' status variable and a 'probe_complete' struct completion. This status is however not reset on remove and likewise the 'probe complete' is not re-initialized, so the bind/unbind/bind test cases would fail. The timeout used before the 'update_status' callback was also a bad idea in hindsight, there should really be no timing assumption as to if and when a driver is bound to a device. An initial draft was based on device_lock() and device_unlock() was tested. This proved too complicated, with deadlocks created during the suspend-resume sequences, which also use the same device_lock/unlock() as the bind/unbind sequences. On a CometLake device, a bad DSDT/BIOS caused spurious resumes and the use of device_lock() caused hangs during suspend. After multiple weeks or testing and painful reverse-engineering of deadlocks on different devices, we looked for alternatives that did not interfere with the device core. A bus notifier was used successfully to keep track of DRIVER_BOUND and DRIVER_UNBIND events. This solved the bind-unbind-bind case in tests, but it can still be defeated with a theoretical corner case where the memory is freed by a .remove while the callback is in use. The notifier only helps make sure the driver callbacks are valid, but not that the memory allocated in probe remains valid while the callbacks are invoked. This patch suggests the introduction of a new 'sdw_dev_lock' mutex protecting probe/remove and all driver callbacks. Since this mutex is 'local' to SoundWire only, it does not interfere with existing locks and does not create deadlocks. In addition, this patch removes the 'probe_complete' completion, instead we directly invoke the 'update_status' from the probe routine. That removes any sort of timing dependency and a much better support for the device/driver model, the driver could be bound before the bus started, or eons after the bus started and the hardware would be properly initialized in all cases. BugLink: https://github.com/thesofproject/linux/is ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ALSA: jack: Access input_dev under mutex It is possible when using ASoC that input_dev is unregistered while calling snd_jack_report, which causes NULL pointer dereference. In order to prevent this serialize access to input_dev using mutex lock.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: use the correct logic to get mma8452_data The original logic to get mma8452_data is wrong, the *dev point to the device belong to iio_dev. we can't use this dev to find the correct i2c_client. The original logic happen to work because it finally use dev->driver_data to get iio_dev. Here use the API to_i2c_client() is wrong and make reader confuse. To correct the logic, it should be like this struct mma8452_data *data = iio_priv(dev_get_drvdata(dev)); But after commit 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata"), the upper logic also can't work. When try to show the avialable scale in userspace, will meet kernel dump, kernel handle NULL pointer dereference. So use dev_to_iio_dev() to correct the logic. Dual fixes tags as the second reflects when the bug was exposed, whilst the first reflects when the original bug was introduced.

In the Linux kernel, the following vulnerability has been resolved: bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE When using bpftool to pin {PROG, MAP, LINK} without FILE, segmentation fault will occur. The reson is that the lack of FILE will cause strlen to trigger NULL pointer dereference. The corresponding stacktrace is shown below: do_pin do_pin_any do_pin_fd mount_bpffs_for_pin strlen(name) <- NULL pointer dereference Fix it by adding validation to the common process.

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix metadata dst->dev xmit null pointer dereference When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0

In the Linux kernel, the following vulnerability has been resolved: media: ti-vpe: cal: Fix a NULL pointer dereference in cal_ctx_v4l2_init_formats() In cal_ctx_v4l2_init_formats(), devm_kzalloc() is assigned to ctx->active_fmt and there is a dereference of it after that, which could lead to NULL pointer dereference on failure of devm_kzalloc(). Fix this bug by adding a NULL check of ctx->active_fmt. This bug was found by a static analyzer. Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup The function rxe_create_qp calls rxe_qp_from_init. If some error occurs, the error handler of function rxe_qp_from_init will set both scq and rcq to NULL. Then rxe_create_qp calls rxe_put to handle qp. In the end, rxe_qp_do_cleanup is called by rxe_put. rxe_qp_do_cleanup directly accesses scq and rcq before checking them. This will cause null-ptr-deref error. The call graph is as below: rxe_create_qp { ... rxe_qp_from_init { ... err1: ... qp->rcq = NULL; <---rcq is set to NULL qp->scq = NULL; <---scq is set to NULL ... } qp_init: rxe_put{ ... rxe_qp_do_cleanup { ... atomic_dec(&qp->scq->num_wq); <--- scq is accessed ... atomic_dec(&qp->rcq->num_wq); <--- rcq is accessed } }

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing xas_retry() calls in xarray iteration netfslib has a number of places in which it performs iteration of an xarray whilst being under the RCU read lock. It *should* call xas_retry() as the first thing inside of the loop and do "continue" if it returns true in case the xarray walker passed out a special value indicating that the walk needs to be redone from the root[*]. Fix this by adding the missing retry checks. [*] I wonder if this should be done inside xas_find(), xas_next_node() and suchlike, but I'm told that's not an simple change to effect. This can cause an oops like that below. Note the faulting address - this is an internal value (|0x2) returned from xarray. BUG: kernel NULL pointer dereference, address: 0000000000000402 ... RIP: 0010:netfs_rreq_unlock+0xef/0x380 [netfs] ... Call Trace: netfs_rreq_assess+0xa6/0x240 [netfs] netfs_readpage+0x173/0x3b0 [netfs] ? init_wait_var_entry+0x50/0x50 filemap_read_page+0x33/0xf0 filemap_get_pages+0x2f2/0x3f0 filemap_read+0xaa/0x320 ? do_filp_open+0xb2/0x150 ? rmqueue+0x3be/0xe10 ceph_read_iter+0x1fe/0x680 [ceph] ? new_sync_read+0x115/0x1a0 new_sync_read+0x115/0x1a0 vfs_read+0xf3/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Changes: ======== ver #2) - Changed an unsigned int to a size_t to reduce the likelihood of an overflow as per Willy's suggestion. - Added an additional patch to fix the maths.

In the Linux kernel, the following vulnerability has been resolved: ice: fix vsi->txq_map sizing The approach of having XDP queue per CPU regardless of user's setting exposed a hidden bug that could occur in case when Rx queue count differ from Tx queue count. Currently vsi->txq_map's size is equal to the doubled vsi->alloc_txq, which is not correct due to the fact that XDP rings were previously based on the Rx queue count. Below splat can be seen when ethtool -L is used and XDP rings are configured: [ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f [ 682.883403] #PF: supervisor read access in kernel mode [ 682.889345] #PF: error_code(0x0000) - not-present page [ 682.895289] PGD 0 P4D 0 [ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI [ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1 [ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 682.923380] RIP: 0010:devres_remove+0x44/0x130 [ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8 [ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002 [ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370 [ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000 [ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000 [ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60 [ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c [ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000 [ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0 [ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 683.038336] Call Trace: [ 683.041167] devm_kfree+0x33/0x50 [ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice] [ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice] [ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice] [ 683.060697] ice_set_channels+0x14f/0x290 [ice] [ 683.065962] ethnl_set_channels+0x333/0x3f0 [ 683.070807] genl_family_rcv_msg_doit+0xea/0x150 [ 683.076152] genl_rcv_msg+0xde/0x1d0 [ 683.080289] ? channels_prepare_data+0x60/0x60 [ 683.085432] ? genl_get_cmd+0xd0/0xd0 [ 683.089667] netlink_rcv_skb+0x50/0xf0 [ 683.094006] genl_rcv+0x24/0x40 [ 683.097638] netlink_unicast+0x239/0x340 [ 683.102177] netlink_sendmsg+0x22e/0x470 [ 683.106717] sock_sendmsg+0x5e/0x60 [ 683.110756] __sys_sendto+0xee/0x150 [ 683.114894] ? handle_mm_fault+0xd0/0x2a0 [ 683.119535] ? do_user_addr_fault+0x1f3/0x690 [ 683.134173] __x64_sys_sendto+0x25/0x30 [ 683.148231] do_syscall_64+0x3b/0xc0 [ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by taking into account the value that num_possible_cpus() yields in addition to vsi->alloc_txq instead of doubling the latter.

In the Linux kernel, the following vulnerability has been resolved: mptcp: never allow the PM to close a listener subflow Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status.

In the Linux kernel, the following vulnerability has been resolved: filemap: Handle sibling entries in filemap_get_read_batch() If a read races with an invalidation followed by another read, it is possible for a folio to be replaced with a higher-order folio. If that happens, we'll see a sibling entry for the new folio in the next iteration of the loop. This manifests as a NULL pointer dereference while holding the RCU read lock. Handle this by simply returning. The next call will find the new folio and handle it correctly. The other ways of handling this rare race are more complex and it's just not worth it.

In the Linux kernel, the following vulnerability has been resolved: net: sparx5: switchdev: fix possible NULL pointer dereference As the possible failure of the allocation, devm_kzalloc() may return NULL pointer. Therefore, it should be better to check the 'db' in order to prevent the dereference of NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: populate connector of struct dp_panel DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose and expect DP source return correct checksum. During drm edid read, correct edid checksum is calculated and stored at connector::real_edid_checksum. The problem is struct dp_panel::connector never be assigned, instead the connector is stored in struct msm_dp::connector. When we run compliance testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid edid set in struct dp_panel::edid so we'll try to use the connectors real_edid_checksum and hit a NULL pointer dereference error because the connector pointer is never assigned. Changes in V2: -- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps() Changes in V3: -- remove unhelpful kernel crash trace commit text -- remove renaming dp_display parameter to dp Changes in V4: -- add more details to commit text Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix null pointer dereference when IPv6 is not enabled When we try to add an IPv6 nexthop and IPv6 is not enabled (!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug has been present since the beginning of IPv6 nexthop gateway support. Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells us that only fib6_nh_init has a dummy stub because fib6_nh_release should not be called if fib6_nh_init returns an error, but the commit below added a call to ipv6_stub->fib6_nh_release in its error path. To fix it return the dummy stub's -EAFNOSUPPORT error directly without calling ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path. [1] Output is a bit truncated, but it clearly shows the error. BUG: kernel NULL pointer dereference, address: 000000000000000000 #PF: supervisor instruction fetch in kernel modede #PF: error_code(0x0010) - not-present pagege PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860 RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840 FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0 Call Trace: <TASK> nh_create_ipv6+0xed/0x10c rtm_new_nexthop+0x6d7/0x13f3 ? check_preemption_disabled+0x3d/0xf2 ? lock_is_held_type+0xbe/0xfd rtnetlink_rcv_msg+0x23f/0x26a ? check_preemption_disabled+0x3d/0xf2 ? rtnl_calcit.isra.0+0x147/0x147 netlink_rcv_skb+0x61/0xb2 netlink_unicast+0x100/0x187 netlink_sendmsg+0x37f/0x3a0 ? netlink_unicast+0x187/0x187 sock_sendmsg_nosec+0x67/0x9b ____sys_sendmsg+0x19d/0x1f9 ? copy_msghdr_from_user+0x4c/0x5e ? rcu_read_lock_any_held+0x2a/0x78 ___sys_sendmsg+0x6c/0x8c ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? lockdep_hardirqs_on+0xd9/0x102 ? sockfd_lookup_light+0x69/0x99 __sys_sendmsg+0x50/0x6e do_syscall_64+0xcb/0xf2 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f98dea28914 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53 RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914 RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008 R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001 R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0 </TASK> Modules linked in: bridge stp llc bonding virtio_net

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6060: prevent crash on an unused port If the port isn't a CPU port nor a user port, 'cpu_dp' is a null pointer and a crash happened on dereferencing it in mv88e6060_setup_port(): [ 9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014 ... [ 9.942216] mv88e6060_setup from dsa_register_switch+0x814/0xe84 [ 9.948616] dsa_register_switch from mdio_probe+0x2c/0x54 [ 9.954433] mdio_probe from really_probe.part.0+0x98/0x2a0 [ 9.960375] really_probe.part.0 from driver_probe_device+0x30/0x10c [ 9.967029] driver_probe_device from __device_attach_driver+0xb8/0x13c [ 9.973946] __device_attach_driver from bus_for_each_drv+0x90/0xe0 [ 9.980509] bus_for_each_drv from __device_attach+0x110/0x184 [ 9.986632] __device_attach from bus_probe_device+0x8c/0x94 [ 9.992577] bus_probe_device from deferred_probe_work_func+0x78/0xa8 [ 9.999311] deferred_probe_work_func from process_one_work+0x290/0x73c [ 10.006292] process_one_work from worker_thread+0x30/0x4b8 [ 10.012155] worker_thread from kthread+0xd4/0x10c [ 10.017238] kthread from ret_from_fork+0x14/0x3c

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: seg6: fix the iif in the IPv6 socket control block When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving interface index into the IPv4 socket control block (v5.16-rc4, net/ipv4/ip_input.c line 510): IPCB(skb)->iif = skb->skb_iif; If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH header, the seg6_do_srh_encap(...) performs the required encapsulation. In this case, the seg6_do_srh_encap function clears the IPv6 socket control block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163): memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29). Since the IPv6 socket control block and the IPv4 socket control block share the same memory area (skb->cb), the receiving interface index info is lost (IP6CB(skb)->iif is set to zero). As a side effect, that condition triggers a NULL pointer dereference if commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") is applied. To fix that issue, we set the IP6CB(skb)->iif with the index of the receiving interface once again.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode Fix the following NULL pointer dereference in mt7915_get_phy_mode routine adding an ibss interface to the mt7915 driver. [ 101.137097] wlan0: Trigger new scan to find an IBSS to join [ 102.827039] wlan0: Creating new IBSS network, BSSID 26:a4:50:1a:6e:69 [ 103.064756] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 103.073670] Mem abort info: [ 103.076520] ESR = 0x96000005 [ 103.079614] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.084934] SET = 0, FnV = 0 [ 103.088042] EA = 0, S1PTW = 0 [ 103.091215] Data abort info: [ 103.094104] ISV = 0, ISS = 0x00000005 [ 103.098041] CM = 0, WnR = 0 [ 103.101044] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000460b1000 [ 103.107565] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 103.116590] Internal error: Oops: 96000005 [#1] SMP [ 103.189066] CPU: 1 PID: 333 Comm: kworker/u4:3 Not tainted 5.10.75 #0 [ 103.195498] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 103.201124] Workqueue: phy0 ieee80211_iface_work [mac80211] [ 103.206695] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--) [ 103.212705] pc : mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.218103] lr : mt7915_mcu_add_bss_info+0x11c/0x760 [mt7915e] [ 103.223927] sp : ffffffc011cdb9e0 [ 103.227235] x29: ffffffc011cdb9e0 x28: ffffff8006563098 [ 103.232545] x27: ffffff8005f4da22 x26: ffffff800685ac40 [ 103.237855] x25: 0000000000000001 x24: 000000000000011f [ 103.243165] x23: ffffff8005f4e260 x22: ffffff8006567918 [ 103.248475] x21: ffffff8005f4df80 x20: ffffff800685ac58 [ 103.253785] x19: ffffff8006744400 x18: 0000000000000000 [ 103.259094] x17: 0000000000000000 x16: 0000000000000001 [ 103.264403] x15: 000899c3a2d9d2e4 x14: 000899bdc3c3a1c8 [ 103.269713] x13: 0000000000000000 x12: 0000000000000000 [ 103.275024] x11: ffffffc010e30c20 x10: 0000000000000000 [ 103.280333] x9 : 0000000000000050 x8 : ffffff8006567d88 [ 103.285642] x7 : ffffff8006563b5c x6 : ffffff8006563b44 [ 103.290952] x5 : 0000000000000002 x4 : 0000000000000001 [ 103.296262] x3 : 0000000000000001 x2 : 0000000000000001 [ 103.301572] x1 : 0000000000000000 x0 : 0000000000000011 [ 103.306882] Call trace: [ 103.309328] mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.314378] mt7915_bss_info_changed+0x198/0x200 [mt7915e] [ 103.319941] ieee80211_bss_info_change_notify+0x128/0x290 [mac80211] [ 103.326360] __ieee80211_sta_join_ibss+0x308/0x6c4 [mac80211] [ 103.332171] ieee80211_sta_create_ibss+0x8c/0x10c [mac80211] [ 103.337895] ieee80211_ibss_work+0x3dc/0x614 [mac80211] [ 103.343185] ieee80211_iface_work+0x388/0x3f0 [mac80211] [ 103.348495] process_one_work+0x288/0x690 [ 103.352499] worker_thread+0x70/0x464 [ 103.356157] kthread+0x144/0x150 [ 103.359380] ret_from_fork+0x10/0x18 [ 103.362952] Code: 394008c3 52800220 394000e4 7100007f (39400023)

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-combo: fix NULL-deref on runtime resume Commit fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") started treating the PCS_USB registers as potentially separate from the PCS registers but used the wrong base when no PCS_USB offset has been provided. Fix the PCS_USB base used at runtime resume to prevent dereferencing a NULL pointer on platforms that do not provide a PCS_USB offset (e.g. SC7180).

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: ipq8074: fix PCI-E clock oops Fix PCI-E clock related kernel oops that are caused by a missing clock parent. pcie0_rchng_clk_src has num_parents set to 2 but only one parent is actually set via parent_hws, it should also have "XO" defined. This will cause the kernel to panic on a NULL pointer in clk_core_get_parent_by_index(). So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent data. Since there is already an existing static const char * const gcc_xo_gpll0[] used to provide the same parents via parent_names convert those users to clk_parent_data as well. Without this earlycon is needed to even catch the OOPS as it will reset the board before serial is initialized with the following: [ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000 [ 0.232322] Mem abort info: [ 0.239094] ESR = 0x96000004 [ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.244908] SET = 0, FnV = 0 [ 0.250377] EA = 0, S1PTW = 0 [ 0.253236] FSC = 0x04: level 0 translation fault [ 0.256277] Data abort info: [ 0.261141] ISV = 0, ISS = 0x00000004 [ 0.264262] CM = 0, WnR = 0 [ 0.267820] [0000a00000000000] address between user and kernel address ranges [ 0.270954] Internal error: Oops: 96000004 [#1] SMP [ 0.278067] Modules linked in: [ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0 [ 0.285882] Hardware name: Xiaomi AX3600 (DT) [ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec [ 0.303067] lr : __clk_register+0x1d8/0x820 [ 0.308273] sp : ffffffc01111b7d0 [ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040 [ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800 [ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828 [ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020 [ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a [ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006 [ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000 [ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06 [ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001 [ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700 [ 0.379982] Call trace: [ 0.387091] clk_core_get_parent_by_index+0x68/0xec [ 0.389351] __clk_register+0x1d8/0x820 [ 0.394210] devm_clk_hw_register+0x5c/0xe0 [ 0.398030] devm_clk_register_regmap+0x44/0x8c [ 0.402198] qcom_cc_really_probe+0x17c/0x1d0 [ 0.406711] qcom_cc_probe+0x34/0x44 [ 0.411224] gcc_ipq8074_probe+0x18/0x30 [ 0.414869] platform_probe+0x68/0xe0 [ 0.418776] really_probe.part.0+0x9c/0x30c [ 0.422336] __driver_probe_device+0x98/0x144 [ 0.426329] driver_probe_device+0x44/0x11c [ 0.430842] __device_attach_driver+0xb4/0x120 [ 0.434836] bus_for_each_drv+0x68/0xb0 [ 0.439349] __device_attach+0xb0/0x170 [ 0.443081] device_initial_probe+0x14/0x20 [ 0.446901] bus_probe_device+0x9c/0xa4 [ 0.451067] device_add+0x35c/0x834 [ 0.454886] of_device_add+0x54/0x64 [ 0.458360] of_platform_device_create_pdata+0xc0/0x100 [ 0.462181] of_platform_bus_create+0x114/0x370 [ 0.467128] of_platform_bus_create+0x15c/0x370 [ 0.471641] of_platform_populate+0x50/0xcc [ 0.476155] of_platform_default_populate_init+0xa8/0xc8 [ 0.480324] do_one_initcall+0x50/0x1b0 [ 0.485877] kernel_init_freeable+0x234/0x29c [ 0.489436] kernel_init+0x24/0x120 [ 0.493948] ret_from_fork+0x10/0x20 [ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042) [ 0.501079] ---[ end trace 4ca7e1129da2abce ]---

A flaw was found in the Linux kernel. A null pointer dereference in bond_ipsec_add_sa() may lead to local denial of service.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-compress: prevent the potentially use of null pointer There is one call trace that snd_soc_register_card() ->snd_soc_bind_card()->soc_init_pcm_runtime() ->snd_soc_dai_compress_new()->snd_soc_new_compress(). In the trace the 'codec_dai' transfers from card->dai_link, and we can see from the snd_soc_add_pcm_runtime() in snd_soc_bind_card() that, if value of card->dai_link->num_codecs is 0, then 'codec_dai' could be null pointer caused by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'. And snd_soc_register_card() is called by various platforms. Therefore, it is better to add the check in the case of misusing. And because 'cpu_dai' has already checked in soc_init_pcm_runtime(), there is no need to check again. Adding the check as follow, then if 'codec_dai' is null, snd_soc_new_compress() will not pass through the check 'if (playback + capture != 1)', avoiding the leftover use of 'codec_dai'.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix possible null pointer dereference. This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c"

In the Linux kernel, the following vulnerability has been resolved: mptcp: remove tcp ulp setsockopt support TCP_ULP setsockopt cannot be used for mptcp because its already used internally to plumb subflow (tcp) sockets to the mptcp layer. syzbot managed to trigger a crash for mptcp connections that are in fallback mode: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0 RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline] [..] __tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline] tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160 do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391 mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638 Remove support for TCP_ULP setsockopt.

In the Linux kernel, the following vulnerability has been resolved: skmsg: Fix wrong last sg check in sk_msg_recvmsg() Fix one kernel NULL pointer dereference as below: [ 224.462334] Call Trace: [ 224.462394] __tcp_bpf_recvmsg+0xd3/0x380 [ 224.462441] ? sock_has_perm+0x78/0xa0 [ 224.462463] tcp_bpf_recvmsg+0x12e/0x220 [ 224.462494] inet_recvmsg+0x5b/0xd0 [ 224.462534] __sys_recvfrom+0xc8/0x130 [ 224.462574] ? syscall_trace_enter+0x1df/0x2e0 [ 224.462606] ? __do_page_fault+0x2de/0x500 [ 224.462635] __x64_sys_recvfrom+0x24/0x30 [ 224.462660] do_syscall_64+0x5d/0x1d0 [ 224.462709] entry_SYSCALL_64_after_hwframe+0x65/0xca In commit 9974d37ea75f ("skmsg: Fix invalid last sg check in sk_msg_recvmsg()"), we change last sg check to sg_is_last(), but in sockmap redirection case (without stream_parser/stream_verdict/ skb_verdict), we did not mark the end of the scatterlist. Check the sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all do not mark the end of sg. They are expected to use sg.end for end judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here.

In the Linux kernel, the following vulnerability has been resolved: soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc The allocation funciton devm_kcalloc may fail and return a null pointer, which would cause a null-pointer dereference later. It might be better to check it and directly return -ENOMEM just like the usage of devm_kcalloc in previous code.

In the Linux kernel, the following vulnerability has been resolved: crypto: octeontx2 - remove CONFIG_DM_CRYPT check No issues were found while using the driver with dm-crypt enabled. So CONFIG_DM_CRYPT check in the driver can be removed. This also fixes the NULL pointer dereference in driver release if CONFIG_DM_CRYPT is enabled. ... Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... Call trace: crypto_unregister_alg+0x68/0xfc crypto_unregister_skciphers+0x44/0x60 otx2_cpt_crypto_exit+0x100/0x1a0 otx2_cptvf_remove+0xf8/0x200 pci_device_remove+0x3c/0xd4 __device_release_driver+0x188/0x234 device_release_driver+0x2c/0x4c ...

A NULL pointer dereference flaw was found in the Linux kernel's BPF subsystem in the way a user triggers the map_get_next_key function of the BPF bloom filter. This flaw allows a local user to crash the system. This flaw affects Linux kernel versions prior to 5.17-rc1.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix null pointer dereference Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel. The root cause is null pointer defeference of bi_next in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c. BUG: kernel NULL pointer dereference, address: 000000000000002e PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Tainted: G U 5.17.0-rc1 Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021 RIP: 0010:tgl_get_bw_info+0x2de/0x510 ... [ 2.554467] Call Trace: [ 2.554467] <TASK> [ 2.554467] intel_bw_init_hw+0x14a/0x434 [ 2.554467] ? _printk+0x59/0x73 [ 2.554467] ? _dev_err+0x77/0x91 [ 2.554467] i915_driver_hw_probe+0x329/0x33e [ 2.554467] i915_driver_probe+0x4c8/0x638 [ 2.554467] i915_pci_probe+0xf8/0x14e [ 2.554467] ? _raw_spin_unlock_irqrestore+0x12/0x2c [ 2.554467] pci_device_probe+0xaa/0x142 [ 2.554467] really_probe+0x13f/0x2f4 [ 2.554467] __driver_probe_device+0x9e/0xd3 [ 2.554467] driver_probe_device+0x24/0x7c [ 2.554467] __driver_attach+0xba/0xcf [ 2.554467] ? driver_attach+0x1f/0x1f [ 2.554467] bus_for_each_dev+0x8c/0xc0 [ 2.554467] bus_add_driver+0x11b/0x1f7 [ 2.554467] driver_register+0x60/0xea [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] i915_init+0x2c/0xb9 [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] do_one_initcall+0x12e/0x2b3 [ 2.554467] do_initcall_level+0xd6/0xf3 [ 2.554467] do_initcalls+0x4e/0x79 [ 2.554467] kernel_init_freeable+0xed/0x14d [ 2.554467] ? rest_init+0xc1/0xc1 [ 2.554467] kernel_init+0x1a/0x120 [ 2.554467] ret_from_fork+0x1f/0x30 [ 2.554467] </TASK> ... Kernel panic - not syncing: Fatal exception (cherry picked from commit c247cd03898c4c43c3bce6d4014730403bc13032)

In the Linux kernel, the following vulnerability has been resolved: igc: Reinstate IGC_REMOVED logic and implement it properly The initially merged version of the igc driver code (via commit 146740f9abc4, "igc: Add support for PF") contained the following IGC_REMOVED checks in the igc_rd32/wr32() MMIO accessors: u32 igc_rd32(struct igc_hw *hw, u32 reg) { u8 __iomem *hw_addr = READ_ONCE(hw->hw_addr); u32 value = 0; if (IGC_REMOVED(hw_addr)) return ~value; value = readl(&hw_addr[reg]); /* reads should not return all F's */ if (!(~value) && (!reg || !(~readl(hw_addr)))) hw->hw_addr = NULL; return value; } And: #define wr32(reg, val) \ do { \ u8 __iomem *hw_addr = READ_ONCE((hw)->hw_addr); \ if (!IGC_REMOVED(hw_addr)) \ writel((val), &hw_addr[(reg)]); \ } while (0) E.g. igb has similar checks in its MMIO accessors, and has a similar macro E1000_REMOVED, which is implemented as follows: #define E1000_REMOVED(h) unlikely(!(h)) These checks serve to detect and take note of an 0xffffffff MMIO read return from the device, which can be caused by a PCIe link flap or some other kind of PCI bus error, and to avoid performing MMIO reads and writes from that point onwards. However, the IGC_REMOVED macro was not originally implemented: #ifndef IGC_REMOVED #define IGC_REMOVED(a) (0) #endif /* IGC_REMOVED */ This led to the IGC_REMOVED logic to be removed entirely in a subsequent commit (commit 3c215fb18e70, "igc: remove IGC_REMOVED function"), with the rationale that such checks matter only for virtualization and that igc does not support virtualization -- but a PCIe device can become detached even without virtualization being in use, and without proper checks, a PCIe bus error affecting an igc adapter will lead to various NULL pointer dereferences, as the first access after the error will set hw->hw_addr to NULL, and subsequent accesses will blindly dereference this now-NULL pointer. This patch reinstates the IGC_REMOVED checks in igc_rd32/wr32(), and implements IGC_REMOVED the way it is done for igb, by checking for the unlikely() case of hw_addr being NULL. This change prevents the oopses seen when a PCIe link flap occurs on an igc adapter.

In the Linux kernel, the following vulnerability has been resolved: USB: host: isp116x: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Check for null pointer of pointer substream before dereferencing it Pointer substream is being dereferenced on the assignment of pointer card before substream is being null checked with the macro PCM_RUNTIME_CHECK. Although PCM_RUNTIME_CHECK calls BUG_ON, it still is useful to perform the the pointer check before card is assigned.

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: Fix NULL pointer dereference in ->remove() drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove().

In the Linux kernel, the following vulnerability has been resolved: net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start() sparx_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: sparx_stats_init() create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL. So as sparx5_start().

In the Linux kernel, the following vulnerability has been resolved: phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe() sp_usb_phy_probe() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: fix possible null-ptr-deref in arm_smmu_device_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: locking/csd_lock: Change csdlock_debug from early_param to __setup The csdlock_debug kernel-boot parameter is parsed by the early_param() function csdlock_debug(). If set, csdlock_debug() invokes static_branch_enable() to enable csd_lock_wait feature, which triggers a panic on arm64 for kernels built with CONFIG_SPARSEMEM=y and CONFIG_SPARSEMEM_VMEMMAP=n. With CONFIG_SPARSEMEM_VMEMMAP=n, __nr_to_section is called in static_key_enable() and returns NULL, resulting in a NULL dereference because mem_section is initialized only later in sparse_init(). This is also a problem for powerpc because early_param() functions are invoked earlier than jump_label_init(), also resulting in static_key_enable() failures. These failures cause the warning "static key 'xxx' used before call to jump_label_init()". Thus, early_param is too early for csd_lock_wait to run static_branch_enable(), so changes it to __setup to fix these.

In the Linux kernel, the following vulnerability has been resolved: nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done The done() netlink callback nfc_genl_dump_ses_done() should check if received argument is non-NULL, because its allocation could fail earlier in dumpit() (nfc_genl_dump_ses()).

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: vop: fix possible null-ptr-deref in vop_bind() It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: ralink: Check for null return of devm_kcalloc Because of the possible failure of the allocation, data->domains might be NULL pointer and will cause the dereference of the NULL pointer later. Therefore, it might be better to check it and directly return -ENOMEM without releasing data manually if fails, because the comment of the devm_kmalloc() says "Memory allocated with this function is automatically freed on driver detach.".

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: avoid null dereference in deinit If venus_probe fails at pm_runtime_put_sync the error handling first calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets core->ops to NULL, hfi_core_deinit cannot call the core_deinit function anymore. Avoid this null pointer derefence by skipping the call when necessary.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails: register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list. When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ... If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer: is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL! Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list.

In the Linux kernel, the following vulnerability has been resolved: binder: fix alloc->vma_vm_mm null-ptr dereference Syzbot reported a couple issues introduced by commit 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA"), in which we attempt to acquire the mmap_lock when alloc->vma_vm_mm has not been initialized yet. This can happen if a binder_proc receives a transaction without having previously called mmap() to setup the binder_proc->alloc space in [1]. Also, a similar issue occurs via binder_alloc_print_pages() when we try to dump the debugfs binder stats file in [2]. Sample of syzbot's crash report: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] CPU: 0 PID: 3755 Comm: syz-executor229 Not tainted 6.0.0-rc1-next-20220819-syzkaller #0 syz-executor229[3755] cmdline: ./syz-executor2294415195 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022 RIP: 0010:__lock_acquire+0xd83/0x56d0 kernel/locking/lockdep.c:4923 [...] Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5666 [inline] lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631 down_read+0x98/0x450 kernel/locking/rwsem.c:1499 mmap_read_lock include/linux/mmap_lock.h:117 [inline] binder_alloc_new_buf_locked drivers/android/binder_alloc.c:405 [inline] binder_alloc_new_buf+0xa5/0x19e0 drivers/android/binder_alloc.c:593 binder_transaction+0x242e/0x9a80 drivers/android/binder.c:3199 binder_thread_write+0x664/0x3220 drivers/android/binder.c:3986 binder_ioctl_write_read drivers/android/binder.c:5036 [inline] binder_ioctl+0x3470/0x6d00 drivers/android/binder.c:5323 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] ================================================================== Fix these issues by setting up alloc->vma_vm_mm pointer during open() and caching directly from current->mm. This guarantees we have a valid reference to take the mmap_lock during scenarios described above. [1] https://syzkaller.appspot.com/bug?extid=f7dc54e5be28950ac459 [2] https://syzkaller.appspot.com/bug?extid=a75ebe0452711c9e56d9

In the Linux kernel, the following vulnerability has been resolved: blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? set_kthread_struct+0x40/0x40 [12622.970884] ret_from_fork+0x22/0x30 [12622.974875] </TASK> [12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_w ---truncated---

In the Linux kernel, the following vulnerability has been resolved: pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference.