Microsoft SharePoint Server Remote Code Execution Vulnerability

Microsoft SharePoint Server Remote Code Execution Vulnerability

An os command injection vulnerability exists in the adm.cgi set_ledonoff() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Firmware in KAON AR2140 routers prior to version 4.2.16 is vulnerable to a shell command injection via sending a crafted request to one of the endpoints. In order to exploit this vulnerability, one has to have access to the administrative portal of the router.

A command execution vulnerability exists in the qos.cgi qos_sta() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Netwrix CoSoSys Endpoint Protector through 5.9.3 and CoSoSys Unify through 7.0.6 contain a remote code execution vulnerability in the shadowing component of the Endpoint Protector and Unify agent which allows an attacker with administrative access to the Endpoint Protector or Unify server to overwrite sensitive configuration and subsequently execute system commands with SYSTEM/root privileges on a chosen client endpoint.

Netgear XR1000 v1.0.0.64 is vulnerable to command injection in usb_remote_smb_conf.cgi via the share_name parameter.

Tenda O3V2 with firmware versions V1.0.0.10 and V1.0.0.12 was discovered to contain a Blind Command Injection via dest parameter in /goform/getTraceroute. This vulnerability allows attackers to execute arbitrary commands with root privileges. Authentication is required to exploit this vulnerability.

If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. Roon Labs has already fixed this vulnerability in the following versions: Roon Server 2021-05-18 and later

Cisco Video Communications Server (VCS) before X7.0.3 contains a command injection vulnerability which allows remote, authenticated attackers to execute arbitrary commands.

There is a command injection vulnerability in some Hikvision NVRs. This could allow an authenticated user with administrative rights to execute arbitrary commands.

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

An issue in Koha ILS 23.05 and before allows a remote attacker to execute arbitrary code via a crafted script to the format parameter.

In the AMD SEV/SEV-ES feature, memory can be rearranged in the guest address space that is not detected by the attestation mechanism which could be used by a malicious hypervisor to potentially lead to arbitrary code execution within the guest VM if a malicious administrator has access to compromise the server hypervisor.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Dell vApp Manager, versions prior to 9.2.4.9 contain a Command Injection Vulnerability. An authorized attacker could potentially exploit this vulnerability leading to an execution of an inserted command. Dell recommends customers to upgrade at the earliest opportunity.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

A vulnerability in Pulse Connect Secure before 9.1R12 could allow an authenticated administrator to perform command injection via an unsanitized web parameter in the administrator web console.

A vulnerability in Pulse Connect Secure before 9.1R12 could allow an authenticated administrator to perform command injection via an unsanitized web parameter.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability via the url parameter of an authenticated enpoint in Enphase IQ Gateway (formerly known as Enphase) allows OS Command Injection.This issue affects Envoy: 4.x <= 7.x

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later

Microsoft Defender for IoT Remote Code Execution Vulnerability

A vulnerability in the Redfish API of Cisco UCS B-Series, Cisco UCS Managed C-Series, and Cisco UCS X-Series Servers could allow an authenticated, remote attacker with administrative privileges to perform command injection attacks on an affected system and elevate privileges to root. This vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by sending crafted commands through the Redfish API on an affected device. A successful exploit could allow the attacker to elevate privileges to root.

A vulnerability in the web-based management interface of the Cisco WAP371 Wireless-AC/N Dual Radio Access Point (AP) with Single Point Setup could allow an authenticated, remote attacker to perform command injection attacks against an affected device. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit this vulnerability, the attacker must have valid administrative credentials for the device.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

An improper input insertion vulnerability in AiCloud on certain router models may lead to arbitrary command execution. Refer to the '01/02/2025 ASUS Router AiCloud vulnerability' section on the ASUS Security Advisory for more information.

A vulnerability was found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /admin/sn_package/sn_https. The manipulation of the argument https_enable leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118. This affects an unknown part of the file /admin/network/diag_traceroute6. The manipulation of the argument diag_traceroute6 leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /admin/network/ajax_getChannelList. The manipulation of the argument countryCode leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Pimcore customer-data-framework up to 4.2.0. Affected by this issue is some unknown functionality of the file /admin/customermanagementframework/customers/list. The manipulation of the argument filterDefinition/filter leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 4.2.1 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability was found in 1000 Projects Beauty Parlour Management System 1.0. It has been classified as critical. Affected is an unknown function of the file /admin/search-invoices.php. The manipulation of the argument searchdata leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118 and classified as critical. Affected by this issue is some unknown functionality of the file /admin/network/diag_iperf. The manipulation of the argument iperf leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in TimGeyssens UIOMatic 5 and classified as critical. This vulnerability affects unknown code of the file /src/UIOMatic/wwwroot/backoffice/resources/uioMaticObject.r. The manipulation leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118. It has been classified as critical. Affected is an unknown function of the file /admin/network/wifi_schedule. The manipulation of the argument wifi_schedule_day_em_5 leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device.

A vulnerability classified as critical was found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118. This vulnerability affects unknown code of the file /admin/network/diag_pinginterface. The manipulation of the argument diag_ping leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in EnGenius ENH1350EXT, ENS500-AC and ENS620EXT up to 20241118. Affected is an unknown function of the file /admin/network/diag_nslookup. The manipulation of the argument diag_nslookup leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028. It has been rated as critical. This issue affects the function set_ipv6 of the file firewall.cgi. The manipulation of the argument dhcpGateway leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Guangzhou Tuchuang Computer Software Development Interlib Library Cluster Automation Management System up to 2.0.1. This affects an unknown part of the file /interlib/admin/SysLib?cmdACT=inputLIBCODE&mod=batchXSL&xsl=editLIBCODE.xsl&libcodes=&ROWID=. The manipulation of the argument sql leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in WAVLINK WN530H4, WN530HG4 and WN572HG3 up to 20221028. Affected is the function set_ipv6 of the file internet.cgi. The manipulation of the argument IPv6OpMode/IPv6IPAddr/IPv6WANIPAddr/IPv6GWAddr leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the ClearPass Policy Manager web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as a non-privileged user on the underlying operating system leading to partial system compromise.

A vulnerability was found in CodeAstro Real Estate Management System up to 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /aboutedit.php of the component About Us Page. The manipulation of the argument id leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Azure Database for PostgreSQL Flexible Server Extension Elevation of Privilege Vulnerability

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later