A vulnerability, which was classified as critical, has been found in Comodo Internet Security Premium 12.3.4.8162. This issue affects some unknown processing of the file cis_update_x64.xml of the component Manifest File Handler. The manipulation of the argument binary/params leads to os command injection. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

VMware NSX SD-WAN Edge by VeloCloud prior to version 3.1.0 contains a command injection vulnerability in the local web UI component. This component is disabled by default and should not be enabled on untrusted networks. VeloCloud by VMware will be removing this service from the product in future releases. Successful exploitation of this issue could result in remote code execution.

A vulnerability was found in Teledyne FLIR FB-Series O and FLIR FH-Series ID 1.3.2.16. It has been declared as critical. This vulnerability affects the function sendCommand of the file runcmd.sh. The manipulation of the argument cmd leads to command injection. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The researcher highlights, that "[a]lthough this functionality is currently disabled due to server CGI configuration errors, it is essentially a 'time bomb' waiting to be activated". The vendor was contacted early about this disclosure but did not respond in any way.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in openEuler A-Tune-Collector on Linux allows Command Injection. This vulnerability is associated with program files https://gitee.Com/openeuler/A-Tune-Collector/blob/master/atune_collector/plugin/monitor/process/sched.Py. This issue affects A-Tune-Collector: from 1.1.0-3 through 1.3.0.

Roo Code is an AI-powered autonomous coding agent that lives in users' editors. In versions prior to 3.25.5, Roo-Code fails to properly handle process substitution and single ampersand characters in the command parsing logic for auto-execute commands. If a user has enabled auto-approved execution for a command such as ls, an attacker who can submit crafted prompts to the agent may inject arbitrary commands to be executed alongside the intended command. Exploitation requires attacker access to submit prompts and for the user to have enabled auto-approved command execution, which is disabled by default. This vulnerability could allow an attacker to execute arbitrary code. The issue is fixed in version 3.25.5.

1Panel is a web interface and MCP Server that manages websites, files, containers, databases, and LLMs on a Linux server. In versions 2.0.5 and below, the HTTPS protocol used for communication between the Core and Agent endpoints has incomplete certificate verification during certificate validation, leading to unauthorized interface access. Due to the presence of numerous command execution or high-privilege interfaces in 1Panel, this results in Remote Code Execution (RCE). This is fixed in version 2.0.6. The CVE has been translated from Simplified Chinese using GitHub Copilot.

A vulnerability was found in Jrohy trojan up to 2.15.3. It has been declared as critical. This vulnerability affects the function LogChan of the file trojan/util/linux.go. The manipulation of the argument c leads to os command injection. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

Roo Code is an AI-powered autonomous coding agent. The project-specific MCP configuration for the Roo Code agent is stored in the `.roo/mcp.json` file within the VS Code workspace. Because the MCP configuration format allows for execution of arbitrary commands, prior to version 3.20.3, it would have been possible for an attacker with access to craft a prompt to ask the agent to write a malicious command to the MCP configuration file. If the user had opted-in to auto-approving file writes within the project, this would have led to arbitrary command execution. This issue is of moderate severity, since it requires the attacker to already be able to submit prompts to the agent (for instance through a prompt injection attack), for the user to have MCP enabled (on by default), and for the user to have enabled auto-approved file writes (off by default). Version 3.20.3 fixes the issue by adding an additional layer of opt-in configuration for auto-approving writing to Roo's configuration files, including all files within the `.roo/` folder.

Successful exploitation of the vulnerability could allow an attacker to execute arbitrary commands as root, potentially leading to the loss of confidentiality, integrity, availability, and full control of the access point.

A vulnerability was found in Ackites KillWxapkg up to 2.4.1. It has been declared as critical. This vulnerability affects the function processFile of the file internal/unpack/unpack.go of the component wxapkg File Parser. The manipulation leads to os command injection. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

The LearnPress plugin for WordPress is vulnerable to Command Injection in all versions up to, and including, 4.2.5.7 via the get_content function. This is due to the plugin making use of the call_user_func function with user input. This makes it possible for unauthenticated attackers to execute any public function with one parameter, which could result in remote code execution.

Google-it is a Node.js package which allows its users to send search queries to Google and receive the results in a JSON format. When using the 'Open in browser' option in versions up to 1.6.2, google-it will unsafely concat the result's link retrieved from google to a shell command, potentially exposing the server to RCE.

A command injection issue in TRENDnet TEW-411BRPplus v.2.07_eu that allows a local attacker to execute arbitrary code via the data1 parameter in the debug.cgi page.

GNU Mailman 2.1.39, as bundled in cPanel (and WHM), in certain external archiver configurations, allows unauthenticated attackers to execute arbitrary OS commands via shell metacharacters in an email Subject line. NOTE: multiple third parties report that they are unable to reproduce this, regardless of whether cPanel or WHM is used.

baserCMS is a website development framework. Prior to version 5.0.9, there is an OS Command Injection vulnerability in the site search feature of baserCMS. Version 5.0.9 contains a fix for this vulnerability.

Proxyee-Down is open source proxy software. An attacker being able to provide an extension script (eg: through a MiTM attack or by hosting a malicious extension) may be able to run arbitrary commands on the system running Proxyee-Down. For more details including a PoC see the referenced GHSL-2021-053. As of the writing of this CVE there is currently no patched version.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP115(V4) 5.0.4 Build 20220216 of the N300 Wireless Gigabit Access Point.

fail2ban is a daemon to ban hosts that cause multiple authentication errors. In versions 0.9.7 and prior, 0.10.0 through 0.10.6, and 0.11.0 through 0.11.2, there is a vulnerability that leads to possible remote code execution in the mailing action mail-whois. Command `mail` from mailutils package used in mail actions like `mail-whois` can execute command if unescaped sequences (`\n~`) are available in "foreign" input (for instance in whois output). To exploit the vulnerability, an attacker would need to insert malicious characters into the response sent by the whois server, either via a MITM attack or by taking over a whois server. The issue is patched in versions 0.10.7 and 0.11.3. As a workaround, one may avoid the usage of action `mail-whois` or patch the vulnerability manually.

An OS command injection vulnerability in the Simple Certificate Enrollment Protocol (SCEP) feature of PAN-OS software allows an unauthenticated network-based attacker with specific knowledge of the firewall configuration to execute arbitrary code with root user privileges. The attacker must have network access to the GlobalProtect interfaces to exploit this issue. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers with Prisma Access 2.1 Preferred and Prisma Access 2.1 Innovation firewalls are impacted by this issue.

A vulnerability, which was classified as critical, has been found in D-Link DAR-8000-10 up to 20230819. Affected by this issue is some unknown functionality of the file /log/decodmail.php. The manipulation of the argument file leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. VDB-238574 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The remote upgrade feature in Guardzilla GZ180 devices allow command injection via a crafted new firmware version parameter.

A remote execution of arbitrary commands vulnerability was discovered in some Aruba Instant Access Point (IAP) products in version(s): Aruba Instant 6.4.x: 6.4.4.8-4.2.4.17 and below; Aruba Instant 6.5.x: 6.5.4.18 and below; Aruba Instant 8.3.x: 8.3.0.14 and below; Aruba Instant 8.5.x: 8.5.0.11 and below; Aruba Instant 8.6.x: 8.6.0.7 and below; Aruba Instant 8.7.x: 8.7.1.1 and below. Aruba has released patches for Aruba Instant that address this security vulnerability.

An issue was discovered in the lever crate before 0.1.1 for Rust. AtomicBox<T> implements the Send and Sync traits for all types T.

A OS Command Injection vulnerability exists in Node.js versions <14.21.1, <16.18.1, <18.12.1, <19.0.1 due to an insufficient IsAllowedHost check that can easily be bypassed because IsIPAddress does not properly check if an IP address is invalid before making DBS requests allowing rebinding attacks.The fix for this issue in https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-32212 was incomplete and this new CVE is to complete the fix.

A vulnerability in the REST API of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to perform a command injection attack and elevate privileges to root. This vulnerability is due to insufficient input validation for specific API endpoints. An attacker in a man-in-the-middle position could exploit this vulnerability by intercepting and modifying specific internode communications from one ISE persona to another ISE persona. A successful exploit could allow the attacker to run arbitrary commands with root privileges on the underlying operating system. To exploit this vulnerability, the attacker would need to decrypt HTTPS traffic between two ISE personas that are located on separate nodes.

An unvalidated REST API in the AppFormix Agent of Juniper Networks AppFormix allows an unauthenticated remote attacker to execute commands as root on the host running the AppFormix Agent, when certain preconditions are performed by the attacker, thus granting the attacker full control over the environment. This issue affects: Juniper Networks AppFormix 3 versions prior to 3.1.22, 3.2.14, 3.3.0.

A vulnerability was found in MicroWorld eScan Antivirus 7.0.32 on Linux. It has been rated as critical. This issue affects some unknown processing of the file rtscanner of the component Quarantine Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in TOTOLINK A720R 4.1.5. Affected is the function exportOvpn. The manipulation leads to os command injection. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection when ingesting a remote Kaggle dataset due to a lack of input sanitization in the ingest_kaggle() API

This affects the package Gerapy from 0 and before 0.9.3. The input being passed to Popen, via the project_configure endpoint, isn’t being sanitized.

A OS Command Injection vulnerability exists in Node.js versions <14.20.0, <16.20.0, <18.5.0 due to an insufficient IsAllowedHost check that can easily be bypassed because IsIPAddress does not properly check if an IP address is invalid before making DBS requests allowing rebinding attacks.

This affects versions of the package pydash before 6.0.0. A number of pydash methods such as pydash.objects.invoke() and pydash.collections.invoke_map() accept dotted paths (Deep Path Strings) to target a nested Python object, relative to the original source object. These paths can be used to target internal class attributes and dict items, to retrieve, modify or invoke nested Python objects. **Note:** The pydash.objects.invoke() method is vulnerable to Command Injection when the following prerequisites are satisfied: 1) The source object (argument 1) is not a built-in object such as list/dict (otherwise, the __init__.__globals__ path is not accessible) 2) The attacker has control over argument 2 (the path string) and argument 3 (the argument to pass to the invoked method) The pydash.collections.invoke_map() method is also vulnerable, but is harder to exploit as the attacker does not have direct control over the argument to be passed to the invoked function.

Versions of the package simple-git before 3.16.0 are vulnerable to Remote Code Execution (RCE) via the clone(), pull(), push() and listRemote() methods, due to improper input sanitization. This vulnerability exists due to an incomplete fix of [CVE-2022-25912](https://security.snyk.io/vuln/SNYK-JS-SIMPLEGIT-3112221).

The package simple-git before 3.15.0 are vulnerable to Remote Code Execution (RCE) when enabling the ext transport protocol, which makes it exploitable via clone() method. This vulnerability exists due to an incomplete fix of [CVE-2022-24066](https://security.snyk.io/vuln/SNYK-JS-SIMPLEGIT-2434306).

An issue was discovered in the kekbit crate before 0.3.4 for Rust. For ShmWriter<H>, Send is implemented without requiring H: Send.

A command execution vulnerability exists in the tddpd enable_test_mode functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926 and Tp-Link N300 Wireless Access Point (EAP115 V4) v5.0.4 Build 20220216. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.This vulnerability impacts `uclited` on the EAP225(V3) 5.1.0 Build 20220926 of the AC1350 Wireless MU-MIMO Gigabit Access Point.

An issue was discovered in the cache crate through 2020-11-24 for Rust. There are unconditional implementations of Send and Sync for Cache<K>.

An issue was discovered in SmarterTools SmarterMail through 100.0.7537. Meddler-in-the-middle attackers can pipeline commands after a POP3 STLS command, injecting plaintext commands into an encrypted user session.

The package snyk before 1.1064.0; the package snyk-mvn-plugin before 2.31.3; the package snyk-gradle-plugin before 3.24.5; the package @snyk/snyk-cocoapods-plugin before 2.5.3; the package snyk-sbt-plugin before 2.16.2; the package snyk-python-plugin before 1.24.2; the package snyk-docker-plugin before 5.6.5; the package @snyk/snyk-hex-plugin before 1.1.6 are vulnerable to Command Injection due to an incomplete fix for [CVE-2022-40764](https://security.snyk.io/vuln/SNYK-JS-SNYK-3037342). A successful exploit allows attackers to run arbitrary commands on the host system where the Snyk CLI is installed by passing in crafted command line flags. In order to exploit this vulnerability, a user would have to execute the snyk test command on untrusted files. In most cases, an attacker positioned to control the command line arguments to the Snyk CLI would already be positioned to execute arbitrary commands. However, this could be abused in specific scenarios, such as continuous integration pipelines, where developers can control the arguments passed to the Snyk CLI to leverage this component as part of a wider attack against an integration/build pipeline. This issue has been addressed in the latest Snyk Docker images available at https://hub.docker.com/r/snyk/snyk as of 2022-11-29. Images downloaded and built prior to that date should be updated. The issue has also been addressed in the Snyk TeamCity CI/CD plugin as of version v20221130.093605.

Netdata is an open source option for real-time infrastructure monitoring and troubleshooting. An attacker with the ability to establish a streaming connection can execute arbitrary commands on the targeted Netdata agent. When an alert is triggered, the function `health_alarm_execute` is called. This function performs different checks and then enqueues a command by calling `spawn_enq_cmd`. This command is populated with several arguments that are not sanitized. One of them is the `registry_hostname` of the node for which the alert is raised. By providing a specially crafted `registry_hostname` as part of the health data that is streamed to a Netdata (parent) agent, an attacker can execute arbitrary commands at the remote host as a side-effect of the raised alert. Note that the commands are executed as the user running the Netdata Agent. This user is usually named `netdata`. The ability to run arbitrary commands may allow an attacker to escalate privileges by escalating other vulnerabilities in the system, as that user. The problem has been fixed in: Netdata agent v1.37 (stable) and Netdata agent v1.36.0-409 (nightly). As a workaround, streaming is not enabled by default. If you have previously enabled this, it can be disabled. Limiting access to the port on the recipient Agent to trusted child connections may mitigate the impact of this vulnerability.

An os command injection vulnerability exists in the liburvpn.so create_private_key functionality of Milesight VPN v2.0.2. A specially-crafted network request can lead to command execution. An attacker can send a malicious packet to trigger this vulnerability.

In Mahara before 20.04.5, 20.10.3, 21.04.2, and 21.10.0, exporting collections via PDF export could lead to code execution via shell metacharacters in a collection name. Additional, in Mahara before 20.10.4, 21.04.3, and 21.10.1, exporting collections via PDF export could cause code execution

PrinterLogic Web Stack versions 19.1.1.13 SP9 and below do not sanitize user input resulting in pre-auth remote code execution.

An OS Command Injection vulnerability in the PAN-OS GlobalProtect portal allows an unauthenticated network based attacker to execute arbitrary OS commands with root privileges. An attacker requires some knowledge of the firewall to exploit this issue. This issue can not be exploited if GlobalProtect portal feature is not enabled. This issue impacts PAN-OS 9.1 versions earlier than PAN-OS 9.1.3; PAN-OS 8.1 versions earlier than PAN-OS 8.1.15; PAN-OS 9.0 versions earlier than PAN-OS 9.0.9; all versions of PAN-OS 8.0 and PAN-OS 7.1. Prisma Access services are not impacted by this vulnerability.

A command execution issue was found in Apache SpamAssassin prior to 3.4.3. Carefully crafted nefarious rule configuration (.cf) files can be configured to run system commands similar to CVE-2018-11805. With this bug unpatched, exploits can be injected in a number of scenarios including the same privileges as spamd is run which may be elevated though doing so remotely is difficult. In addition to upgrading to SA 3.4.4, we again recommend that users should only use update channels or 3rd party .cf files from trusted places. If you cannot upgrade, do not use 3rd party rulesets, do not use sa-compile and do not run spamd as an account with elevated privileges.

The package cookiecutter before 2.1.1 are vulnerable to Command Injection via hg argument injection. When calling the cookiecutter function from Python code with the checkout parameter, it is passed to the hg checkout command in a way that additional flags can be set. The additional flags can be used to perform a command injection.

An issue was discovered in Pulse Secure Pulse Connect Secure (PCS) through 2020-04-06. The applet in tncc.jar, executed on macOS, Linux, and Solaris clients when a Host Checker policy is enforced, allows a man-in-the-middle attacker to perform OS command injection attacks (against a client) via shell metacharacters to the doCustomRemediateInstructions method, because Runtime.getRuntime().exec() is used.