Missing access control in ForgeRock Access Management 7.1.0 and earlier versions on all platforms allows remote unauthenticated attackers to hijack sessions, including potentially admin-level sessions. This issue affects: ForgeRock Access Management 7.1 versions prior to 7.1.1; 6.5 versions prior to 6.5.4; all previous versions.

A vulnerability has been found in ghostlander Halcyon and classified as critical. Affected by this vulnerability is the function CBlock::AddToBlockIndex of the file src/main.cpp of the component Block Verification. The manipulation leads to improper access controls. The attack can be launched remotely. Upgrading to version 1.1.1.0-hal is able to address this issue. The identifier of the patch is 0675b25ae9cc10b5fdc8ea3a32c642979762d45e. It is recommended to upgrade the affected component. The identifier VDB-217417 was assigned to this vulnerability.

bookstack is vulnerable to Improper Access Control

FirstUseAuthenticator is a JupyterHub authenticator that helps new users set their password on their first login to JupyterHub. When JupyterHub is used with FirstUseAuthenticator, a vulnerability in versions prior to 1.0.0 allows unauthorized access to any user's account if `create_users=True` and the username is known or guessed. One may upgrade to version 1.0.0 or apply a patch manually to mitigate the vulnerability. For those who cannot upgrade, there is no complete workaround, but a partial mitigation exists. One can disable user creation with `c.FirstUseAuthenticator.create_users = False`, which will only allow login with fully normalized usernames for already existing users prior to jupyterhub-firstuserauthenticator 1.0.0. If any users have never logged in with their normalized username (i.e. lowercase), they will still be vulnerable until a patch or upgrade occurs.

An issue was discovered in Couchbase Server before 7.2.4. cURL calls to /diag/eval are not sufficiently restricted.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

Shenzhen JF6000 Cloud Media Collaboration Processing Platform firmware version V1.2.0 and software version V2.0.0 build 6245 is vulnerable to Incorrect Access Control.

Incorrect access control in Book Store Management System v1 allows attackers to access unauthorized pages and execute administrative functions without authenticating.

Unauthenticated Arbitrary Options Update vulnerability leading to full website compromise discovered in Image Hover Effects Ultimate (versions <= 9.6.1) WordPress plugin.

The Axel Technology WOLF1MS and WOLF2MS devices (firmware versions 0.8.5 to 1.0.3) are vulnerable to Broken Access Control due to missing authentication on the /cgi-bin/gstFcgi.fcgi endpoint. Unauthenticated remote attackers can list user accounts, create new administrative users, delete users, and modify system settings, leading to full compromise of the device.

A vulnerability in FiberHome GPON ONU HG6145F1 RP4423 allows the device's factory default Wi-Fi password (WPA/WPA2 pre-shared key) to be predicted from the SSID. The device generates default passwords using a deterministic algorithm that derives the router passphrase from the SSID, enabling an attacker who can observe the SSID to predict the default password without authentication or user interaction.

A flaw has been found in projectworlds House Rental and Property Listing 1.0. Impacted is an unknown function of the file /app/register.php?action=reg of the component Signup. This manipulation of the argument image causes unrestricted upload. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A security vulnerability has been detected in technical-laohu mpay up to 1.2.4. The impacted element is an unknown function of the component QR Code Image Handler. Such manipulation of the argument codeimg leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was found in ageerle ruoyi-ai 2.0.0 and classified as critical. Affected by this issue is the function speechToTextTranscriptionsV2/upload of the file ruoyi-modules/ruoyi-system/src/main/java/org/ruoyi/system/service/impl/SseServiceImpl.java. The manipulation of the argument File leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.0.1 is able to address this issue. The patch is identified as 4e93ac86d4891c59ecfcd27c051de9b3c5379315. It is recommended to upgrade the affected component.

A weakness has been identified in EyouCMS up to 1.7.1/5.0. Impacted is the function check_userinfo of the file Diyajax.php of the component Member Avatar Handler. Executing a manipulation of the argument viewfile can lead to unrestricted upload. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

MILLENSYS Vision Tools Workspace 6.5.0.2585 exposes a sensitive configuration endpoint (/MILLENSYS/settings) that is accessible without authentication. This page leaks plaintext database credentials, file share paths, internal license server configuration, and software update parameters. An unauthenticated attacker can retrieve this information by accessing the endpoint directly, potentially leading to full system compromise. The vulnerability is due to missing access controls on a privileged administrative function.

Tenda AC15 v15.03.05.18_multi) issues an authentication cookie that exposes the account password hash to the client and uses a short, low-entropy suffix as the session identifier. An attacker with network access or the ability to run JS in a victim browser can steal the cookie and replay it to access protected resources.

The Axel Technology StreamerMAX MK II devices (firmware versions 0.8.5 to 1.0.3) are vulnerable to Broken Access Control due to missing authentication on the /cgi-bin/gstFcgi.fcgi endpoint. Unauthenticated remote attackers can list user accounts, create new administrative users, delete users, and modify system settings, leading to full compromise of the device.

Adobe Commerce versions 2.4.7, 2.4.6-p5, 2.4.5-p7, 2.4.4-p8 and earlier are affected by an Improper Access Control vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and view minor unauthorised information. Exploitation of this issue does not require user interaction.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability was detected in Teledyne FLIR AX8 up to 1.46. Affected by this vulnerability is an unknown functionality of the file /upload.php. Performing manipulation of the argument File results in unrestricted upload. It is possible to initiate the attack remotely. The exploit is now public and may be used. Upgrading to version 1.49.16 addresses this issue. Upgrading the affected component is recommended. The vendor points out: "FLIR AX8 internal web site has been refactored to be able to handle the reported vulnerabilities."

A vulnerability, which was classified as critical, was found in SourceCodester Simple Food Ordering System 1.0. Affected is an unknown function of the file /editproduct.php. The manipulation of the argument photo leads to unrestricted upload. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in Metasoft 美特软件 MetaCRM up to 6.4.2. This issue affects some unknown processing of the file sendfile.jsp. The manipulation of the argument File leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An improper access control vulnerability in FortiMail version 7.4.0 configured with RADIUS authentication and remote_wildcard enabled may allow a remote unauthenticated attacker to bypass admin login via a crafted HTTP request.

The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below contains poorly configured access control, allowing for an unauthenticated attacker to update and add user profiles within the application, and gain full access of the site.

A settings manipulation vulnerability in NCR Terminal Handler v1.5.1 allows attackers to execute arbitrary commands, including editing system security auditing configurations.

Sielco PolyEco1000 is vulnerable to an attacker escalating their privileges by modifying passwords in POST requests.

A vulnerability in SonicWall SonicOS and SonicOSv with management enabled system on specific configuration allow unprivileged user to access advanced routing services. This vulnerability affected SonicOS Gen 5 version 5.9.1.10 and earlier, Gen 6 version 6.2.7.3, 6.5.1.3, 6.5.2.2, 6.5.3.1, 6.2.7.8, 6.4.0.0, 6.5.1.8, 6.0.5.3-86o and SonicOSv 6.5.0.2-8v_RC363 (VMWARE), 6.5.0.2.8v_RC367 (AZURE), SonicOSv 6.5.0.2.8v_RC368 (AWS), SonicOSv 6.5.0.2.8v_RC366 (HYPER_V).

An issue in NCR Terminal Handler v.1.5.1 allows a remote attacker to escalate privileges via a crafted POST request to the grantRolesToUsers, grantRolesToGroups, and grantRolesToOrganization SOAP API component.

Sielco PolyEco1000 is vulnerable to an authentication bypass vulnerability due to an attacker modifying passwords in a POST request and gain unauthorized access to the affected device with administrative privileges.

Improper Access Control in GitHub repository usememos/memos prior to 0.13.2.

The Versa Director SD-WAN orchestration platform which makes use of Cisco NCS application service. Active and Standby Directors communicate over TCP ports 4566 and 4570 to exchange High Availability (HA) information using a shared password. Affected versions of Versa Director bound to these ports on all interfaces. An attacker that can access the Versa Director could access the NCS service on port 4566 and exploit it to perform unauthorized administrative actions and perform remote code execution. Customers are recommended to follow the hardening guide. Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers.

Linen before cd37c3e does not verify that the domain is linen.dev or www.linen.dev when resetting a password. This occurs in create in apps/web/pages/api/forgot-password/index.ts.

An issue was discovered in powermail extension through 12.3.5 for TYPO3. Several actions in the OutputController can directly be called, due to missing or insufficiently implemented access checks, resulting in Broken Access Control. Depending on the configuration of the Powermail Frontend plugins, an unauthenticated attacker can exploit this to edit, update, delete, or export data of persisted forms. This can only be exploited when the Powermail Frontend plugins are used. The fixed versions are 7.5.0, 8.5.0, 10.9.0, and 12.4.0.

In MISP through 2.4.196, app/Controller/BookmarksController.php does not properly restrict access to bookmarks data in the case where the user is not an org admin.

TOTOLINK A3700R V9.1.2u.6134_B20201202 and N600R V5.3c.5137 are vulnerable to Incorrect Access Control.

An issue in Daily Habit Tracker v.1.0 allows a remote attacker to manipulate trackers via the home.php, add-tracker.php, delete-tracker.php, update-tracker.php components.

An improper access control vulnerability has been reported to affect certain legacy versions of HBS 3. If exploited, this vulnerability allows attackers to compromise the security of the operating system.QNAP have already fixed this vulnerability in the following versions of HBS 3: QTS 4.3.6: HBS 3 v3.0.210507 and later QTS 4.3.4: HBS 3 v3.0.210506 and later QTS 4.3.3: HBS 3 v3.0.210506 and later

jupyter-lsp is a coding assistance tool for JupyterLab (code navigation + hover suggestions + linters + autocompletion + rename) using Language Server Protocol. Installations of jupyter-lsp running in environments without configured file system access control (on the operating system level), and with jupyter-server instances exposed to non-trusted network are vulnerable to unauthorised access and modification of file system beyond the jupyter root directory. This issue has been patched in version 2.2.2 and all users are advised to upgrade. Users unable to upgrade should uninstall jupyter-lsp.

An Access Control issue discovered in Extreme Networks Switch Engine (EXOS) before 32.5.1.5, also fixed in 22.7, 31.7.2 allows attackers to gain escalated privileges using crafted telnet commands via Redis server.

Improper Access Control in SICK APU allows an unprivileged remote attacker to download as well as upload arbitrary files via anonymous access to the FTP server.

A vulnerability has been found in SourceCodester Inventory Management System 1.0 and classified as problematic. This vulnerability affects unknown code of the file edit_update.php of the component Password Handler. The manipulation of the argument user_id leads to improper access controls. The attack can be initiated remotely. VDB-236218 is the identifier assigned to this vulnerability.

Incorrect access control in TOTOLINK LR350 V9.3.5u.6369_B20220309 allows attackers to obtain the apmib configuration file, which contains the username and the password, via a crafted request to /cgi-bin/ExportSettings.sh.

An Incorrect Access Control vulnerability was found in /music/ajax.php?action=delete_playlist in Kashipara Music Management System v1.0. This vulnerability allows an unauthenticated attacker to delete the valid music playlist entries.

phpMyFAQ is an open source FAQ web application. Versions 4.0-nightly-2025-10-03 and below do not enforce uniqueness of email addresses during user registration. This allows multiple distinct accounts to be created with the same email. Because email is often used as an identifier for password resets, notifications, and administrative actions, this flaw can cause account ambiguity and, in certain configurations, may lead to privilege escalation or account takeover. This issue is fixed in version 4.0.13.

This vulnerability allows remote attackers to execute escalate privileges on affected installations of SolarWinds Orion Platform 2020.2. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SaveUserSetting endpoint. The issue results from improper restriction of this endpoint to unprivileged users. An attacker can leverage this vulnerability to escalate privileges their privileges from Guest to Administrator. Was ZDI-CAN-11903.

The Weintek cMT product line is vulnerable to various improper access controls, which may allow an unauthenticated attacker to remotely access and download sensitive information and perform administrative actions on behalf of a legitimate administrator.

Microsoft Entra Jira Single-Sign-On Plugin Elevation of Privilege Vulnerability

The vantage6 technology enables to manage and deploy privacy enhancing technologies like Federated Learning (FL) and Multi-Party Computation (MPC). Nodes and servers get a ssh config by default that permits root login with password authentication. In a proper deployment, the SSH service is not exposed so there is no risk, but not all deployments are ideal. The default should therefore be less permissive. The vulnerability can be mitigated by removing the ssh part from the docker file and rebuilding the docker image. Version 4.2.0 patches the vulnerability.

Dynamsoft Service 1.8.1025 through 1.8.2013, 1.7.0330 through 1.7.2531, 1.6.0428 through 1.6.1112, 1.5.0625 through 1.5.3116, 1.4.0618 through 1.4.1230, and 1.0.516 through 1.3.0115 has Incorrect Access Control. This is fixed in 1.8.2014, 1.7.4212, 1.6.3212, 1.5.31212, 1.4.3212, and 1.3.3212.