Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter enable_band_steering.

Netgear Nighthawk AC1900 Smart WiFi Dual Band Gigabit Router R7000-V1.0.11.134_10.2.119 is vulnerable to Buffer Overflow via the wl binary in firmware. There is a stack overflow vulnerability caused by strncat

Certain NETGEAR devices are affected by server-side injection. This affects D7800 before 1.0.1.58, DM200 before 1.0.0.66, EX2700 before 1.0.1.56, EX6150v2 before 1.0.1.86, EX6100v2 before 1.0.1.86, EX6200v2 before 1.0.1.78, EX6250 before 1.0.0.110, EX6410 before 1.0.0.110, EX6420 before 1.0.0.110, EX6400v2 before 1.0.0.110, EX7300 before 1.0.2.144, EX6400 before 1.0.2.144, EX7320 before 1.0.0.110, EX7300v2 before 1.0.0.110, R7500v2 before 1.0.3.48, R7800 before 1.0.2.68, R8900 before 1.0.5.2, R9000 before 1.0.5.2, RAX120 before 1.0.1.90, RBK40 before 2.5.1.16, RBK20 before 2.5.1.16, RBR20 before 2.5.1.16, RBS20 before 2.5.1.16, RBK50 before 2.5.1.16, RBR50 before 2.5.1.16, RBS50 before 2.5.1.16, RBS50Y before 2.6.1.40, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.80, WNR2000v5 before 1.0.0.72, XR500 before 2.3.2.56, and XR700 before 1.0.1.20.

Certain NETGEAR devices are affected by authentication bypass. This affects AC2400 before 1.1.0.84, AC2600 before 1.1.0.84, D7000 before 1.0.1.82, R6020 before 1.0.0.52, R6080 before 1.0.0.52, R6120 before 1.0.0.80, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.84, R6330 before 1.1.0.84, R6350 before 1.1.0.84, R6700v2 before 1.1.0.84, R6800 before 1.1.0.84, R6850 before 1.1.0.84, R6900v2 before 1.1.0.84, R7200 before 1.1.0.84, R7350 before 1.1.0.84, R7400 before 1.1.0.84, and R7450 before 1.1.0.84.

Certain NETGEAR devices are affected by authentication bypass. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBW30 before 2.6.2.2, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and RBS40V before 2.6.2.8.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects RBS50Y before 2.7.0.122, SRK60 before 2.7.0.122, SRR60 before 2.7.0.122, SRS60 before 2.7.0.122, SXK30 before 3.2.33.108, SXR30 before 3.2.33.108, SXS30 before 3.2.33.108, and SRC60 before 2.7.0.122.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.74, D8500 before 1.0.3.60, DC112A before 1.0.0.56, R6300v2 before 1.0.4.50, R6400 before 1.0.1.68, R7000 before 1.0.11.116, R7100LG before 1.0.0.70, RBS40V before 2.6.2.8, RBW30 before 2.6.2.2, RS400 before 1.5.1.80, R7000P before 1.3.2.132, and R6900P before 1.3.2.132.

Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6220 before 1.0.0.68, D6400 before 1.0.0.102, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.54, EX7000 before 1.0.1.94, EX7500 before 1.0.0.72, R6250 before 1.0.4.48, R6300v2 before 1.0.4.52, R6400 before 1.0.1.70, R6400v2 before 1.0.4.102, R6700v3 before 1.0.4.102, R7000 before 1.0.11.116, R7100LG before 1.0.0.64, R7850 before 1.0.5.68, R7900 before 1.0.4.30, R7960P before 1.4.1.68, R8000 before 1.0.4.52, RAX200 before 1.0.2.88, RBS40V before 2.6.2.4, RS400 before 1.5.1.80, XR300 before 1.0.3.56, R7000P before 1.3.2.124, R8000P before 1.4.1.68, R8500 before 1.0.2.144, RAX80 before 1.0.3.102, R6900P before 1.3.2.124, R7900P before 1.4.1.68, R8300 before 1.0.2.144, RAX75 before 1.0.3.102, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RBK752 before 3.2.17.12, and RBK852 before 3.2.17.12.

NETGEAR D7000 devices before 1.0.1.82 are affected by authentication bypass.

NETGEAR JNR1010 devices before 1.0.0.32 have Incorrect Access Control because the ok value of the auth cookie is a special case.

Certain NETGEAR devices are affected by authentication bypass. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBR852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects AC2100 before 1.2.0.88, AC2400 before 1.2.0.88, AC2600 before 1.2.0.88, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.84, R6330 before 1.1.0.84, R6350 before 1.1.0.84, R6700v2 before 1.2.0.88, R6800 before 1.2.0.88, R6850 before 1.1.0.84, R6900v2 before 1.2.0.88, R7200 before 1.2.0.88, R7350 before 1.2.0.88, R7400 before 1.2.0.88, and R7450 before 1.2.0.88.

NETGEAR R6700v2 devices before 1.2.0.88 are affected by authentication bypass.

NETGEAR RAX200 devices before 1.0.5.132 are affected by insecure code.

The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution.

Certain NETGEAR smart switches are affected by a remote admin password change by an unauthenticated attacker via the (disabled by default) /sqfs/bin/sccd daemon, which fails to check authentication when the authentication TLV is missing from a received NSDP packet. This affects GC108P before 1.0.8.2, GC108PP before 1.0.8.2, GS108Tv3 before 7.0.7.2, GS110TPP before 7.0.7.2, GS110TPv3 before 7.0.7.2, GS110TUP before 1.0.5.3, GS308T before 1.0.3.2, GS310TP before 1.0.3.2, GS710TUP before 1.0.5.3, GS716TP before 1.0.4.2, GS716TPP before 1.0.4.2, GS724TPP before 2.0.6.3, GS724TPv2 before 2.0.6.3, GS728TPPv2 before 6.0.8.2, GS728TPv2 before 6.0.8.2, GS750E before 1.0.1.10, GS752TPP before 6.0.8.2, GS752TPv2 before 6.0.8.2, MS510TXM before 1.0.4.2, and MS510TXUP before 1.0.4.2.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this vulnerability is the function sub_47F7C. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Certain NETGEAR devices are affected by lack of access control at the function level. This affects D6220 before 1.0.0.48, D6400 before 1.0.0.82, D7000v2 before 1.0.0.52, D7800 before 1.0.1.44, D8500 before 1.0.3.43, DC112A before 1.0.0.40, DGN2200v4 before 1.0.0.108, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, R6020 before 1.0.0.34, R6080 before 1.0.0.34, R6120 before 1.0.0.44, R6220 before 1.1.0.80, R6230 before 1.1.0.80, R6250 before 1.0.4.34, R6260 before 1.1.0.40, R6850 before 1.1.0.40, R6350 before 1.1.0.40, R6400v2 before 1.0.2.62, R6700v3 before 1.0.2.62, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, R7000 before 1.0.9.34, R6900P before 1.3.1.44, R7000P before 1.3.1.44, R7100LG before 1.0.0.48, R7200 before 1.2.0.48, R7350 before 1.2.0.48, R7400 before 1.2.0.48, R7450 before 1.2.0.36, AC2100 before 1.2.0.36, AC2400 before 1.2.0.36, AC2600 before 1.2.0.36, R7500v2 before 1.0.3.38, R7800 before 1.0.2.58, R7900 before 1.0.3.8, R7960P before 1.4.1.44, R8000 before 1.0.4.28, R7900P before 1.4.1.30, R8000P before 1.4.1.30, R8900 before 1.0.4.2, R9000 before 1.0.4.2, RAX120 before 1.0.0.74, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, WNR3500Lv2 before 1.2.0.56, XR450 before 2.3.2.32, and XR500 before 2.3.2.32.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been classified as critical. Affected is the function sub_4238E8. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

The NETGEAR Insight application before 2.42 for Android and iOS is affected by password mismanagement.

NETGEAR ProSAFE Network Management System has Java Debug Wire Protocol (JDWP) listening on port 11611 and it is remotely accessible by unauthenticated users, allowing attackers to execute arbitrary code.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System 1.6.0.26. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MFileUploadController class. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-12124.

NETGEAR R7800 devices before 1.0.2.68 are affected by remote code execution by unauthenticated attackers.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter enable_band_steering.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter openvpn_server_ip.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter openvpn_push1.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameters KEY1 and KEY2.

Certain NETGEAR devices are affected by authentication bypass. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.

A Symlink Traversal vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WAC120 before 2.1.7, WN604 before 3.3.10, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 before 3.7.11.4, WNDAP660 before 3.7.11.4, WNDAP620 before 2.1.7, and WND930 before 2.1.5.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Symlink Traversal vulnerability in NETGEAR WNR3500U and WNR3500L due to misconfiguration in the SMB service.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.

A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.

In Netgear XR300 V1.0.3.38_10.3.30, a stack-based buffer overflow vulnerability exists in the HTTPD service through the usb_device.cgi endpoint. The vulnerability occurs when processing POST requests containing the usb_folder parameter.

In Netgear XR300 V1.0.3.38_10.3.30, a stack-based buffer overflow vulnerability exists in the HTTPD service through the usb_device.cgi endpoint. The vulnerability occurs when processing POST requests containing the share_name parameter.

In Netgear XR300 V1.0.3.38_10.3.30, a stack-based buffer overflow exists in the HTTPD service through the usb_device.cgi endpoint. The vulnerability occurs when processing POST requests containing the read_access parameter.

A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.78, D6200 before 1.1.00.32, D7000 before 1.0.1.68, D7800 before 1.0.1.56, DM200 before 1.0.0.61, EX2700 before 1.0.1.52, EX6100v2 before 1.0.1.76, EX6150v2 before 1.0.1.76, EX6200v2 before 1.0.1.74, EX6400 before 1.0.2.140, EX7300 before 1.0.2.140, EX8000 before 1.0.1.186, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.38, R6050 before 1.0.1.18, R6080 before 1.0.0.38, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6230 before 1.1.0.80, R6260 before 1.1.0.40, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, R7500v2 before 1.0.3.40, R7800 before 1.0.2.62, R8900 before 1.0.4.12, R9000 before 1.0.4.12, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, WN2000RPTv3 before 1.0.1.34, WN3000RPv2 before 1.0.0.78, WN3000RPv2 before 1.0.0.78, WN3000RPv3 before 1.0.2.78, WN3100RPv2 before 1.0.0.66, WNR2000v5 before 1.0.0.70, WNR2020 before 1.1.0.62, XR450 before 2.3.2.32, and XR500 before 2.3.2.32.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects CBR40 before 2.5.0.10, D6220 before 1.0.0.60, D6400 before 1.0.0.94, D7000v2 before 1.0.0.62, D8500 before 1.0.3.50, DC112A before 1.0.0.48, DGN2200v4 before 1.0.0.114, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX3700 before 1.0.0.84, EX3800 before 1.0.0.84, EX3920 before 1.0.0.84, EX6000 before 1.0.0.44, EX6100 before 1.0.2.28, EX6120 before 1.0.0.54, EX6130 before 1.0.0.36, EX6150 before 1.0.0.46, EX6200 before 1.0.3.94, EX6920 before 1.0.0.54, EX7000 before 1.0.1.90, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6250 before 1.0.4.42, R6300v2 before 1.0.4.42, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700v3 before 1.0.4.98, R6700 before 1.0.2.16, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7100LG before 1.0.0.56, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8300 before 1.0.2.134, R8500 before 1.0.2.134, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.32, RAX50 before 1.0.2.32, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V-200 before 1.0.0.46, RBW30 before 2.5.0.4, RS400 before 1.5.0.48, WN2500RPv2 before 1.0.1.56, WN3500RP before 1.0.0.28, WNDR3400v3 before 1.0.1.32, WNR1000v3 before 1.0.2.78, WNR2000v2 before 1.2.0.12, WNR3500Lv2 before 1.2.0.62, and XR300 before 1.0.3.50.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects AC2100 before 1.2.0.72, AC2400 before 1.2.0.72, AC2600 before 1.2.0.72, CBK40 before 2.5.0.10, CBR40 before 2.5.0.10, D7800 before 1.0.1.58, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6120 before 1.0.0.70, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6330 before 1.1.0.76, R6350 before 1.1.0.76, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700 before 1.0.2.16, R6700v2 before 1.2.0.72, R6700v3 before 1.0.4.98, R6800 before 1.2.0.72, R6850 before 1.1.0.76, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R6900v2 before 1.2.0.72, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7200 before 1.2.0.72, R7350 before 1.2.0.72, R7400 before 1.2.0.72, R7450 before 1.2.0.72, R7800 before 1.0.2.74, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8900 before 1.0.5.24, R9000 before 1.0.5.24, RAX120 before 1.0.1.136, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.64, RAX50 before 1.0.2.64, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RS400 before 1.5.0.48, XR300 before 1.0.3.50, XR450 before 2.3.2.66, XR500 before 2.3.2.66, and XR700 before 1.0.1.34.

NETGEAR NMS300 devices before 1.6.0.27 are affected by command injection by an unauthenticated attacker.

In Netgear RAX30 V1.0.10.94, a PHP-FPM misconfiguration vulnerability is caused by not following the specification to only limit FPM to .php extensions. An attacker may exploit this by uploading malicious scripts disguised with alternate extensions and tricking the web server into executing them as PHP, bypassing security mechanisms based on file extension filtering. This may lead to remote code execution (RCE), information disclosure, or full system compromise.

A vulnerability, which was classified as critical, has been found in Netgear EX6200 1.0.3.94. This issue affects the function sub_3D0BC. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.