A vulnerability, which was classified as critical, has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected by this issue is some unknown functionality of the component DHCP DISCOVER Packet Parser. The manipulation of the argument hostname leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/Wan6to4TunnelCfgRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WzdWlanSiteSurveyRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

TP-Link TL-WR940N V2, TP-Link TL-WR941ND V5 and TP-Link TL-WR841N V8 were discovered to contain a buffer overflow via the component /userRpm/AccessCtrlAccessRulesRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link TL-WR940N V4, TL-WR841N V8/V10, TL-WR740N V1/V2, TL-WR940N V2/V3, and TL-WR941ND V5/V6 were discovered to contain a buffer overflow in the component /userRpm/AccessCtrlTimeSchedRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link TL-WR940N V4, TL-WR841N V8/V10, TL-WR940N V2/V3 and TL-WR941ND V5/V6 were discovered to contain a buffer overflow in the component /userRpm/QoSRuleListRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-LINK Archer C50v2 Archer C50(US)_V2_160801, TP-LINK Archer C20v1 Archer_C20_V1_150707, and TP-LINK Archer C2v1 Archer_C2_US__V1_170228 were discovered to contain a buffer overflow which may lead to a Denial of Service (DoS) when parsing crafted data.

Buffer Overflow in TP-Link WR2041 v1 firmware for the TL-WR2041+ router allows remote attackers to cause a Denial-of-Service (DoS) by sending an HTTP request with a very long "ssid" parameter to the "/userRpm/popupSiteSurveyRpm.html" webpage, which crashes the router.

TP-Link Archer C50 V3 devices before Build 200318 Rel. 62209 allows remote attackers to cause a denial of service via a crafted HTTP Header containing an unexpected Referer field.

A denial of service vulnerability exists in the TDDP functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of network requests can lead to reset to factory settings. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.

A memory corruption vulnerability exists in the web interface functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted HTTP POST request can lead to denial of service of the device's web interface. An attacker can send an unauthenticated HTTP POST request to trigger this vulnerability.

TP-LINK TL-WR1043ND V1_120405 devices contain an unspecified denial of service vulnerability.

A stack overflow in the function DM_ In fillobjbystr() of TP-Link Archer C50&A5(US)_V5_200407 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

Insecure Permissions vulnerability in Connectivity Standards Alliance Matter Official SDK v.1.1.0.0 , Nanoleaf Light strip v.3.5.10, Govee LED Strip v.3.00.42, switchBot Hub2 v.1.0-0.8, Phillips hue hub v.1.59.1959097030, and yeelight smart lamp v.1.12.69 allows a remote attacker to cause a denial of service via a crafted script to the KeySetRemove function.

An issue in the component /userRpm/NetworkCfgRpm of TP-Link TL-WR1041N V2 allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link NC200 through 2.1.8_Build_171109, NC210 through 1.0.9_Build_171214, NC220 through 1.3.0_Build_180105, NC230 through 1.3.0_Build_171205, NC250 through 1.3.0_Build_171205, NC260 through 1.5.1_Build_190805, and NC450 through 1.5.0_Build_181022 devices allow a remote NULL Pointer Dereference.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the pskSecret parameter at /userRpm/WlanSecurityRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the 'ip' parameter at /userRpm/WanStaticIpV6CfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11, triggered by the dnsserver1 and dnsserver2 parameters at /userRpm/WanSlaacCfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain an integer overflow via the function dm_checkString. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

An infinite loop in the function httpRpmPass of TP-Link TL-WR741N/TL-WR742N V1/V2/V3_130415 allows attackers to cause a Denial of Service (DoS) via a crafted packet.

The Web Management of TP-Link TP-SG105E V4 1.0.0 Build 20181120 devices allows an unauthenticated attacker to reboot the device via a reboot.cgi request.

A denial-of-service attack in WPA2, and WPA3-SAE authentication methods in TP-Link AX10v1 before V1_211014, allows a remote unauthenticated attacker to disconnect an already connected wireless client via sending with a wireless adapter specific spoofed authentication frames

An HTTP request smuggling attack in TP-Link AX10v1 before v1_211117 allows a remote unauthenticated attacker to DoS the web application via sending a specific HTTP packet.

A misconfiguration in HTTP/1.0 and HTTP/1.1 of the web interface in TP-Link AX10v1 before V1_211117 allows a remote unauthenticated attacker to send a specially crafted HTTP request and receive a misconfigured HTTP/0.9 response, potentially leading into a cache poisoning attack.

In TP-Link TL-XDR3230 < 1.0.12, TL-XDR1850 < 1.0.9, TL-XDR1860 < 1.0.14, TL-XDR3250 < 1.0.2, TL-XDR6060 Turbo < 1.1.8, TL-XDR5430 < 1.0.11, and possibly others, when IPv6 is used, a routing loop can occur that generates excessive network traffic between an affected device and its upstream ISP's router. This occurs when a link prefix route points to a point-to-point link, a destination IPv6 address belongs to the prefix and is not a local IPv6 address, and a router advertisement is received with at least one global unique IPv6 prefix for which the on-link flag is set.

An exploitable denial-of-service vulnerability exists in the URI-parsing functionality of the TP-Link TL-R600VPN HTTP server. A specially crafted URL can cause the server to stop responding to requests, resulting in downtime for the management portal. An attacker can send either an unauthenticated or authenticated web request to trigger this vulnerability.

TP Link MR200 V4 Firmware version 210201 was discovered to contain a null-pointer-dereference in the web administration panel on /cgi/login via the sign, Action or LoginStatus query parameters which could lead to a denial of service by a local or remote unauthenticated attacker.

A vulnerability classified as critical has been found in TP-LINK Technologies TL-IPC544EP-W4 1.0.9 Build 240428 Rel 69493n. Affected is the function sub_69064 of the file /bin/main. The manipulation of the argument text leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A buffer overflow in the httpd daemon on TP-Link TL-WR841N V10 (firmware version 3.16.9) devices allows an authenticated remote attacker to execute arbitrary code via a GET request to the page for the configuration of the Wi-Fi network.

A vulnerability has been found in TP-Link TL-WR940N V4 and TL-WR841N V11. Affected by this issue is some unknown functionality of the file /userRpm/WanSlaacCfgRpm.htm, which may lead to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

In TP-Link Omada er605 1.0.1 through (v2.6) 2.2.3, a cloud-brd binary is susceptible to an integer overflow that leads to a heap-based buffer overflow. After heap shaping, an attacker can achieve code execution in the context of the cloud-brd binary that runs at the root level. This is fixed in ER605(UN)_v2_2.2.4 Build 020240119.

TP-Link TL-WR940N V4 was discovered to contain a buffer overflow via the ipStart parameter at /userRpm/WanDynamicIpV6CfgRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

Multiple stack-based buffer overflows in TP-Link WR940N WiFi routers with hardware version 4 allow remote authenticated users to execute arbitrary code via the (1) ping_addr parameter to PingIframeRpm.htm or (2) dnsserver2 parameter to WanStaticIpV6CfgRpm.htm.

A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

TP-Link WR841N V8, TP-Link TL-WR940N V2, and TL-WR941ND V5 were discovered to contain a buffer overflow via the radiusSecret parameter at /userRpm/WlanSecurityRpm.

Buffer overflow in in the copy_msg_element function for the devDiscoverHandle server in the TP-Link WR and WDR series, including WDR7400, WDR7500, WDR7660, WDR7800, WDR8400, WDR8500, WDR8600, WDR8620, WDR8640, WDR8660, WR880N, WR886N, WR890N, WR890N, WR882N, and WR708N.

httpd on TP-Link TL-WPA4220 devices (hardware versions 2 through 4) allows remote authenticated users to trigger a buffer overflow (causing a denial of service) by sending a POST request to the /admin/syslog endpoint. Fixed version: TL-WPA4220(EU)_V4_201023

TP-Link TL-WR940N V2/V3/V4, TL-WR941ND V5/V6, TL-WR743ND V1 and TL-WR841N V8 were discovered to contain a buffer overflow in the component /userRpm/AccessCtrlAccessTargetsRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link Archer AX10(EU)_V1.2_230220 was discovered to contain a buffer overflow via the function FUN_131e8 - 0x132B4.

TP-Link USB Network Server TL-PS310U devices before 2.079.000.t0210 allow an attacker on the same network to denial-of-service the device via long input values.

TP-LINK NC200 devices through 2.1.10 build 200401, NC210 devices through 1.0.10 build 200401, NC220 devices through 1.3.1 build 200401, NC230 devices through 1.3.1 build 200401, NC250 devices through 1.3.1 build 200401, NC260 devices through 1.5.3 build_200401, and NC450 devices through 1.5.4 build 200401 have a Buffer Overflow

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the username and password parameters at /userRpm/PPPoEv6CfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

TP-LINK TL-WR840N(ES)_V6.20 was discovered to contain a buffer overflow via the httpRemotePort parameter.

TP-LINK TL-WR840N(ES)_V6.20 was discovered to contain a buffer overflow via the minAddress parameter.

TP-Link WR886N 3.0 1.0.1 Build 150127 Rel.34123n is vulnerable to Buffer Overflow. Authenticated attackers can crash router httpd services via /userRpm/PingIframeRpm.htm request which contains redundant & in parameter.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/get_reg_verify_code feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

A Buffer Overflow vulnerability exists in TP-LINK WR-886N 20190826 2.3.8 in /cloud_config/cloud_device/info interface, which allows a malicious user to executee arbitrary code on the system via a crafted post request.