A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/Wan6to4TunnelCfgRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_APC.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm_AP.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected by this issue is some unknown functionality of the component DHCP DISCOVER Packet Parser. The manipulation of the argument hostname leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

An exploitable denial-of-service vulnerability exists in the URI-parsing functionality of the TP-Link TL-R600VPN HTTP server. A specially crafted URL can cause the server to stop responding to requests, resulting in downtime for the management portal. An attacker can send either an unauthenticated or authenticated web request to trigger this vulnerability.

TP Link MR200 V4 Firmware version 210201 was discovered to contain a null-pointer-dereference in the web administration panel on /cgi/login via the sign, Action or LoginStatus query parameters which could lead to a denial of service by a local or remote unauthenticated attacker.

A memory corruption vulnerability exists in the web interface functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted HTTP POST request can lead to denial of service of the device's web interface. An attacker can send an unauthenticated HTTP POST request to trigger this vulnerability.

Buffer Overflow in TP-Link WR2041 v1 firmware for the TL-WR2041+ router allows remote attackers to cause a Denial-of-Service (DoS) by sending an HTTP request with a very long "ssid" parameter to the "/userRpm/popupSiteSurveyRpm.html" webpage, which crashes the router.

TP-Link TL-WR940N V2, TP-Link TL-WR941ND V5 and TP-Link TL-WR841N V8 were discovered to contain a buffer overflow via the component /userRpm/AccessCtrlAccessRulesRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the pskSecret parameter at /userRpm/WlanSecurityRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11 via the 'ip' parameter at /userRpm/WanStaticIpV6CfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

A buffer overflow vulnerability was discovered in TP-Link TL-WR841ND V11, triggered by the dnsserver1 and dnsserver2 parameters at /userRpm/WanSlaacCfgRpm.htm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.

TP-Link TL-WR940N V4, TL-WR841N V8/V10, TL-WR740N V1/V2, TL-WR940N V2/V3, and TL-WR941ND V5/V6 were discovered to contain a buffer overflow in the component /userRpm/AccessCtrlTimeSchedRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-Link TL-WR940N V4, TL-WR841N V8/V10, TL-WR940N V2/V3 and TL-WR941ND V5/V6 were discovered to contain a buffer overflow in the component /userRpm/QoSRuleListRpm. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

TP-LINK TL-WR1043ND V1_120405 devices contain an unspecified denial of service vulnerability.

TP-Link Archer C50 V3 devices before Build 200318 Rel. 62209 allows remote attackers to cause a denial of service via a crafted HTTP Header containing an unexpected Referer field.

A misconfiguration in HTTP/1.0 and HTTP/1.1 of the web interface in TP-Link AX10v1 before V1_211117 allows a remote unauthenticated attacker to send a specially crafted HTTP request and receive a misconfigured HTTP/0.9 response, potentially leading into a cache poisoning attack.

A stack overflow in the function DM_ In fillobjbystr() of TP-Link Archer C50&A5(US)_V5_200407 allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

An infinite loop in the function httpRpmPass of TP-Link TL-WR741N/TL-WR742N V1/V2/V3_130415 allows attackers to cause a Denial of Service (DoS) via a crafted packet.

TP-LINK Archer C50v2 Archer C50(US)_V2_160801, TP-LINK Archer C20v1 Archer_C20_V1_150707, and TP-LINK Archer C2v1 Archer_C2_US__V1_170228 were discovered to contain a buffer overflow which may lead to a Denial of Service (DoS) when parsing crafted data.

A denial of service vulnerability exists in the TDDP functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of network requests can lead to reset to factory settings. An attacker can send a sequence of unauthenticated packets to trigger this vulnerability.

TP-LINK TL-WR840N(ES)_V6.20_180709 was discovered to contain an integer overflow via the function dm_checkString. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted HTTP request.

Insecure Permissions vulnerability in Connectivity Standards Alliance Matter Official SDK v.1.1.0.0 , Nanoleaf Light strip v.3.5.10, Govee LED Strip v.3.00.42, switchBot Hub2 v.1.0-0.8, Phillips hue hub v.1.59.1959097030, and yeelight smart lamp v.1.12.69 allows a remote attacker to cause a denial of service via a crafted script to the KeySetRemove function.

An issue in the component /userRpm/NetworkCfgRpm of TP-Link TL-WR1041N V2 allows attackers to cause a Denial of Service (DoS) via a crafted GET request.

An HTTP request smuggling attack in TP-Link AX10v1 before v1_211117 allows a remote unauthenticated attacker to DoS the web application via sending a specific HTTP packet.

TP-Link NC200 through 2.1.8_Build_171109, NC210 through 1.0.9_Build_171214, NC220 through 1.3.0_Build_180105, NC230 through 1.3.0_Build_171205, NC250 through 1.3.0_Build_171205, NC260 through 1.5.1_Build_190805, and NC450 through 1.5.0_Build_181022 devices allow a remote NULL Pointer Dereference.

The Web Management of TP-Link TP-SG105E V4 1.0.0 Build 20181120 devices allows an unauthenticated attacker to reboot the device via a reboot.cgi request.

A denial-of-service attack in WPA2, and WPA3-SAE authentication methods in TP-Link AX10v1 before V1_211014, allows a remote unauthenticated attacker to disconnect an already connected wireless client via sending with a wireless adapter specific spoofed authentication frames

In TP-Link TL-XDR3230 < 1.0.12, TL-XDR1850 < 1.0.9, TL-XDR1860 < 1.0.14, TL-XDR3250 < 1.0.2, TL-XDR6060 Turbo < 1.1.8, TL-XDR5430 < 1.0.11, and possibly others, when IPv6 is used, a routing loop can occur that generates excessive network traffic between an affected device and its upstream ISP's router. This occurs when a link prefix route points to a point-to-point link, a destination IPv6 address belongs to the prefix and is not a local IPv6 address, and a router advertisement is received with at least one global unique IPv6 prefix for which the on-link flag is set.

An exploitable remote code execution vulnerability exists in the HTTP header-parsing function of the TP-Link TL-R600VPN HTTP Server. A specially crafted HTTP request can cause a buffer overflow, resulting in remote code execution on the device. An attacker can send an authenticated HTTP request to trigger this vulnerability.

A vulnerability has been found in TP-Link TL-WR940N V4 and TL-WR841N V11. Affected by this issue is some unknown functionality of the file /userRpm/WanSlaacCfgRpm.htm, which may lead to buffer overflow. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in TP-LINK Technologies TL-IPC544EP-W4 1.0.9 Build 240428 Rel 69493n. Affected is the function sub_69064 of the file /bin/main. The manipulation of the argument text leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected is an unknown function of the file /control/WANIPConnection of the component SOAP Request Handler. The manipulation of the argument NewConnectionType leads to buffer overflow. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

TP-Link TL-WR886N 7.0 1.1.0 devices allow remote attackers to cause a denial of service (Tlb Load Exception) via crafted DNS packets to port 53/udp.

TP-Link WR840N devices have a buffer overflow via a long Authorization HTTP header.

TP-Link USB Network Server TL-PS310U devices before 2.079.000.t0210 allow an attacker on the same network to denial-of-service the device via long input values.

Multiple stack-based buffer overflows in TP-Link WR940N WiFi routers with hardware version 4 allow remote authenticated users to execute arbitrary code via the (1) ping_addr parameter to PingIframeRpm.htm or (2) dnsserver2 parameter to WanStaticIpV6CfgRpm.htm.

TP-Link TL-WR840N devices allow remote attackers to cause a denial of service (networking outage) via fragmented packets, as demonstrated by an "nmap -f" command.

Insufficient bound checks in the SMU may allow an attacker to update the from/to address space to an invalid value potentially resulting in a denial of service.

The dma_rx function in drivers/net/wireless/b43/dma.c in the Linux kernel before 2.6.39 does not properly allocate receive buffers, which allows remote attackers to cause a denial of service (system crash) via a crafted frame.

Insufficient bound checks in the SMU may allow an attacker to update the SRAM from/to address space to an invalid value potentially resulting in a denial of service.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105 and classified as critical. This issue affects some unknown processing of the file /boafrm/formMapDel of the component HTTP POST Request Handler. The manipulation of the argument devicemac1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in TOTOLINK X15 1.0.0-B20230714.1105 and classified as critical. This vulnerability affects unknown code of the file /boafrm/formFilter of the component HTTP POST Request Handler. The manipulation of the argument ip6addr/url/vpnPassword/vpnUser leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /boafrm/formMultiAPVLAN of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Calling Buffer.fill() or Buffer.alloc() with some parameters can lead to a hang which could result in a Denial of Service. In order to address this vulnerability, the implementations of Buffer.alloc() and Buffer.fill() were updated so that they zero fill instead of hanging in these cases. All versions of Node.js 6.x (LTS "Boron"), 8.x (LTS "Carbon"), and 9.x are vulnerable. All versions of Node.js 10.x (Current) are NOT vulnerable.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been rated as critical. Affected by this issue is some unknown functionality of the file /boafrm/formRoute of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed BFD packets that are received on line cards where the BFD hardware offload feature is enabled. An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads.

The issue was addressed with improved bounds checks. This issue is fixed in iOS 17.7 and iPadOS 17.7, iOS 18 and iPadOS 18. An attacker may be able to cause unexpected app termination.