Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. Starting in version 1.3.0 and prior to version 1.15.12, Api_SetSecureParam fails to sanitize incoming pointers, and implicitly trusts that the pointer the user has passed in is safe to read from. SetRegValue then reads an arbitrary address, which can be a kernel pointer, into a HKLM Security SBIE registry value. This can later be retrieved by API_GET_SECURE_PARAM. Version 1.15.12 fixes the issue.

Insufficiently protected credentials in the Intel(R) ON Event Series Android application before version 2.0 may allow an authenticated user to potentially enable information disclosure via local access.

Unprotected Transport of Credentials vulnerability in SiteManager provisioning service allows local attacker to capture credentials if the service is used after provisioning. This issue affects: Secomea SiteManager All versions prior to 9.5 on Hardware.

Windows Kernel Information Disclosure Vulnerability

When the Windows Tentacle docker image starts up it logs all the commands that it runs along with the arguments, which writes the Octopus Server API key in plaintext. This does not affect the Linux Docker image

Users with appropriate file access may be able to access unencrypted user credentials saved by MongoDB Extension for VS Code in a binary file. These credentials may be used by malicious attackers to perform unauthorized actions. This vulnerability affects all MongoDB Extension for VS Code including and prior to version 0.7.0

The vulnerability could expose cleartext credentials from AVEVA InTouch Runtime 2020 R2 and all prior versions (WindowViewer) if an authorized, privileged user creates a diagnostic memory dump of the process and saves it to a non-protected location.

phpMyAdmin before 2.11.5.1 stores the MySQL (1) username and (2) password, and the (3) Blowfish secret key, in cleartext in a Session file under /tmp, which allows local users to obtain sensitive information.

Dell ECS, versions 3.8.1.0 through 3.8.1.7, and Dell ObjectScale versions prior to 4.2.0.0, contains a Cleartext Storage of Sensitive Information vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure.

The insufficiently protected credentials vulnerability in the CLI command of the USG FLEX H series uOS firmware version V1.21 and earlier versions could allow an authenticated local attacker to gain privilege escalation by stealing the authentication token of a login administrator. Note that this attack could be successful only if the administrator has not logged out.

An issue was discovered in the A4N (Aremis 4 Nomad) application 1.5.0 for Android. It uses a local database to store data and accounts. However, the password is stored in cleartext. Therefore, an attacker can retrieve the passwords of other users that used the same device.

Dell GeoDrive, Versions 2.1 - 2.2, contains an information disclosure vulnerability. An authenticated non-admin user could potentially exploit this vulnerability and gain access to sensitive information.

Wowza Streaming Engine before 4.8.8.01 (in a default installation) has cleartext passwords stored in the conf/admin.password file. A regular local user is able to read usernames and passwords.

The configuration file stores credentials in cleartext. An attacker with local access rights can read or modify the configuration file, potentially resulting in the service being abused due to sensitive information exposure.

Emerson OpenBSI through 2022-04-29 mishandles credential storage. It is an engineering environment for the ControlWave and Bristol Babcock line of RTUs. This environment provides access control functionality through user authentication and privilege management. The credentials for various users are stored insecurely in the SecUsers.ini file by using a simple string transformation rather than a cryptographic mechanism.

The local iLabClient database in itech iLabClient 3.7.1 allows local attackers to read cleartext credentials (from the CONFIGS table) for their servers configured in the client.

IBM Java Security Components in IBM SDK, Java Technology Edition 8 before SR1 FP10, 7 R1 before SR3 FP10, 7 before SR9 FP10, 6 R1 before SR8 FP7, 6 before SR16 FP7, and 5.0 before SR16 FP13 stores plaintext information in memory dumps, which allows local users to obtain sensitive information by reading a file.

Navidrome is an open source web-based music collection server and streamer. Navidrome stores the JWT secret in plaintext in the navidrome.db database file under the property table. This practice introduces a security risk because anyone with access to the database file can retrieve the secret. This vulnerability is fixed in 0.54.1.

Dell Command | Update, Dell Update, and Alienware Update versions prior to 4.7 contain a Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in download operation component. A local malicious user could potentially exploit this vulnerability leading to the disclosure of confidential data.

IBM Jazz for Service Management 1.1.3.10 and IBM Tivoli Netcool/OMNIbus_GUI displays user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 207610.

The Tableau integration in RSA Archer 6.4 P1 (6.4.0.1) through 6.9 P2 (6.9.0.2) is affected by an insecure credential storage vulnerability. An malicious attacker with access to the Tableau workbook file may obtain access to credential information to use it in further attacks.

Jenkins Assembla Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

TP-Link's TL-WPA4220 4.0.2 Build 20180308 Rel.37064 does not use SSL by default. Attacker on the local network can monitor traffic and capture the cookie and other sensitive information.

A flaw was found in the FreeIPA API audit, where it sends the whole FreeIPA command line to journalctl. As a consequence, during the FreeIPA installation process, it inadvertently leaks the administrative user credentials, including the administrator password, to the journal database. In the worst-case scenario, where the journal log is centralized, users with access to it can have improper access to the FreeIPA administrator credentials.

The installation process in IBM Security AppScan Enterprise 8.x before 8.6.0.2 iFix 003, 8.7.x before 8.7.0.1 iFix 003, 8.8.x before 8.8.0.1 iFix 002, and 9.0.x before 9.0.0.1 iFix 001 on Linux places a cleartext password in a temporary file, which allows local users to obtain sensitive information by reading this file.

Ansible before 1.5.5 constructs filenames containing user and password fields on the basis of deb lines in sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by leveraging existence of a file that uses the "deb http://user:pass@server:port/" format.

Redpanda before 22.3.12 discloses cleartext AWS credentials. The import functionality in the rpk binary logs an AWS Access Key ID and Secret in cleartext to standard output, allowing a local user to view the key in the console, or in Kubernetes logs if stdout output is collected. The fixed versions are 22.3.12, 22.2.10, and 22.1.12.

HCL Traveler for Microsoft Outlook (HTMO) is susceptible to a credential leakage which could allow an attacker to access other computers or applications.

A vulnerability in a password management API in Brocade Fabric OS versions before v9.2.1, v9.2.0b, v9.1.1d, and v8.2.3e prints sensitive information in log files. This could allow an authenticated user to view the server passwords for protocols such as scp and sftp. Detail. When the firmwaredownload command is incorrectly entered or points to an erroneous file, the firmware download log captures the failed command, including any password entered in the command line.

Insufficiently protected credentials for Intel(R) AMT and Intel(R) Standard Manageability may allow a privileged user to potentially enable information disclosure via local access.

A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a could allow an authenticated user to print the Auth, Priv, and SSL key store passwords in unencrypted logs by manipulating command variables.

IBM Cognos Analytics 11.2.0, 11.2.1, 11.2.2, 11.2.3, 11.2.4, 12.0.0, 12.0.1, 12.0.2, 12.0.3, and IBM Cognos Analytics Reports for iOS 11.0.0.7 could allow a local attacker to obtain sensitive information in the form of an API key. An attacker could use this information to launch further attacks against affected applications.

Capturix ScanShare 1.06 build 50 stores sensitive information such as the password in cleartext in capturixss_cfg.ini, which is readable by local users.

The vCenter Server contains an information disclosure vulnerability due to the logging of credentials in plaintext. A malicious actor with access to a workstation that invoked a vCenter Server Appliance ISO operation (Install/Upgrade/Migrate/Restore) can access plaintext passwords used during that operation.

A vulnerability, which was classified as problematic, was found in code-projects Blood Bank Management System 1.0. This affects an unknown part of the component Password Handler. The manipulation leads to cleartext storage in a file or on disk. An attack has to be approached locally.

Insufficiently Protected Credentials vulnerability in the remote backups application on Western Digital My Cloud devices that could allow an attacker who has gained access to a relevant endpoint to use that information to access protected data. This issue affects: Western Digital My Cloud My Cloud versions prior to 5.25.124 on Linux.

1Password for Mac 7.2.4 through 7.9.x before 7.9.3 is vulnerable to a process validation bypass. Malicious software running on the same computer can exfiltrate secrets from 1Password provided that 1Password is running and is unlocked. Affected secrets include vault items and derived values used for signing in to 1Password.

In JetBrains IntelliJ IDEA before 2021.3.3 it was possible to get passwords from protected fields

An issue in Texas Instruments Fusion Digital Power Designer v.7.10.1 allows a local attacker to obtain sensitive information via the plaintext storage of credentials

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, user account passwords set in clear text could leak to users without any password. This issue affects: Arista Metamako Operating System MOS-0.18 and post releases in the MOS-0.1x train All releases in the MOS-0.2x train MOS-0.31.1 and prior releases in the MOS-0.3x train

ZOLL Defibrillator Dashboard, v prior to 2.2, The affected products contain credentials stored in plaintext. This could allow an attacker to gain access to sensitive information.

A vulnerability has been found in CESNET theme-cesnet up to 1.x on ownCloud and classified as problematic. Affected by this vulnerability is an unknown functionality of the file cesnet/core/lostpassword/templates/resetpassword.php. The manipulation leads to insufficiently protected credentials. Attacking locally is a requirement. Upgrading to version 2.0.0 is able to address this issue. The identifier of the patch is 2b857f2233ce5083b4d5bc9bfc4152f933c3e4a6. It is recommended to upgrade the affected component. The identifier VDB-217633 was assigned to this vulnerability.

HCL Launch may store certain data for recurring activities in a plain text format.

CloudForms stores user passwords in recoverable format

HCL Launch stores user credentials in plain clear text which can be read by a local user.

Plaintext vulnerability in the Gallery search module. Impact: Successful exploitation of this vulnerability will affect availability.

In Versa Director, the unencrypted backup files stored on the Versa deployment contain credentials stored within configuration files. These credentials are for various application components such as SNMP, and SSL and Trust keystores.

IBM Datacap Navigator 9.1.5, 9.1.6, 9.1.7, 9.1.8, and 9.1.9 stores user credentials in plain clear text which can be read by a local user. IBM X-Force ID: 295972.

IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite Software 1.10.12.0 through 1.10.22.0 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 281429.

The affected device stores sensitive information in cleartext, which may allow an authenticated user to access session data stored in the OAuth database belonging to legitimate users