Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file.

Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file.

Use After Free vulnerability exists in the IPT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted IPT file.

Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file.

Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, IPT, JT, SAT, STL, STP, X_B or X_T file. NOTE: CVE-2024-3298 and CVE-2024-3299 were SPLIT from this ID.

Use-After-Free vulnerability exists in the SLDPRT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted SLDPRT file.

Use-After-Free, Out-of-bounds Write and Heap-based Buffer Overflow vulnerabilities exist in the DWG and DXF file reading procedure in SOLIDWORKS Desktop from Release SOLIDWORKS 2021 through Release SOLIDWORKS 2023. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted DWG or DXF file.

A Use-After-Free vulnerability in SLDPRT file reading procedure exists in SOLIDWORKS Desktop from Release SOLIDWORKS 2021 through Release SOLIDWORKS 2023. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted SLDPRT file.

Out-Of-Bounds Write, Use of Uninitialized Resource and Use-After-Free vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted SLDDRW or SLDPRT file. NOTE: this vulnerability was SPLIT from CVE-2024-1847.

Use of Uninitialized Variable vulnerability exists in the JT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted JT file.

Heap-based Buffer Overflow and Uninitialized Variable vulnerabilities exist in the X_B and SAT file reading procedure in eDrawings from Release SOLIDWORKS 2024 through Release SOLIDWORKS 2025. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted X_B or SAT file.

Out-Of-Bounds Write vulnerability exists in the OBJ file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted OBJ file.

Out-Of-Bounds Read vulnerability exists in the JT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted JT file.

Out-Of-Bounds Write and Type Confusion vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted DWG or DXF. NOTE: this vulnerability was SPLIT from CVE-2024-1847.

In startDevice of AAudioServiceStreamBase.cpp there is a possible out of bounds write due to a use after free. This could lead to local arbitrary code execution with no additional execution privileges needed. User interaction is needed for exploitation. https://source.android.com/security/bulletin/2018-07-01

A use after free vulnerability in FATEK Automation WinProladder versions 3.30 and prior may be exploited when a valid user opens a malformed project file, which may allow arbitrary code execution.

Use after free in Microsoft Office Visio allows an unauthorized attacker to execute code locally.

Use after free in Microsoft Office Visio allows an unauthorized attacker to execute code locally.

Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code locally.

Use after free in Microsoft Office Word allows an unauthorized attacker to execute code locally.

Use after free in Microsoft Office PowerPoint allows an unauthorized attacker to execute code locally.

Use-after-free vulnerability in the Doc.media.newPlayer method in Multimedia.api in Adobe Reader and Acrobat 9.x before 9.3, and 8.x before 8.2 on Windows and Mac OS X, allows remote attackers to execute arbitrary code via a crafted PDF file using ZLib compressed streams, as exploited in the wild in December 2009.

Microsoft Excel Remote Code Execution Vulnerability

Use After Free in GitHub repository gpac/gpac prior to 2.3.0-DEV.

Use-after-free vulnerability in the ReadPWPImage function in coders/pwp.c in ImageMagick 6.9.5-5 allows remote attackers to cause a denial of service (application crash) or have other unspecified impact via a crafted file.

A use-after-free vulnerability exists in the JavaScript engine of Foxit Software's Foxit PDF Reader version 9.1.0.5096. A use-after-free condition can occur when accessing the Keywords property of the this.info object. An attacker needs to trick the user to open the malicious file to trigger this vulnerability. If the browser plugin extension is enabled, visiting a malicious site can also trigger the vulnerability.

An exploitable use-after-free vulnerability exists in the JavaScript engine of Foxit Software's Foxit PDF Reader version 9.1.0.5096. A specially crafted PDF document can trigger a previously freed object in memory to be reused, resulting in arbitrary code execution. An attacker needs to trick the user to open the malicious file to trigger this vulnerability. If the browser plugin extension is enabled, visiting a malicious site can also trigger the vulnerability.

An exploitable use-after-free vulnerability exists in the JavaScript engine of Foxit Software's Foxit PDF Reader version 9.1.0.5096. A specially crafted PDF document can trigger a previously freed object in memory to be reused, resulting in arbitrary code execution. An attacker needs to trick the user to open the malicious file to trigger this vulnerability. If the browser plugin extension is enabled, visiting a malicious site can also trigger the vulnerability.

A use-after-free vulnerability exists in the JavaScript engine of Foxit Software's Foxit PDF Reader version 9.1.0.5096. A use-after-free condition can occur when accessing the Producer property of the this.info object. An attacker needs to trick the user to open the malicious file to trigger this vulnerability. If the browser plugin extension is enabled, visiting a malicious site can also trigger the vulnerability.

A use-after-free vulnerability exists in the JavaScript engine of Foxit Software's Foxit PDF Reader version 9.1.0.5096. A use-after-free condition can occur when accessing the Creator property of the this.info object. An attacker needs to trick the user to open the malicious file to trigger this vulnerability. If the browser plugin extension is enabled, visiting a malicious site can also trigger the vulnerability.

A use-after-free vulnerability exists in the way MKVToolNix MKVINFO v25.0.0 handles the MKV (matroska) file format. A specially crafted MKV file can cause arbitrary code execution in the context of the current user.

A use-after-free vulnerability exists in the JavaScript engine of Foxit Software's Foxit PDF Reader version 9.1.0.5096. A use-after-free condition can occur when accessing the Subject property of the this.info object. An attacker needs to trick the user to open the malicious file to trigger this vulnerability. If the browser plugin extension is enabled, visiting a malicious site can also trigger the vulnerability.

This vulnerability allows remote atackers to execute arbitrary code on affected installations of Foxit PhantomPDF 9.6.0.25114. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of text field objects. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-9400.

An exploitable use-after-free vulnerability exists in the JavaScript engine of Foxit Software's Foxit PDF Reader version 9.1.0.5096. A specially crafted PDF document can trigger a previously freed object in memory to be reused, resulting in arbitrary code execution. An attacker needs to trick the user to open the malicious file to trigger this vulnerability. If the browser plugin extension is enabled, visiting a malicious site can also trigger the vulnerability.

An exploitable use-after-free vulnerability exists in the JavaScript engine of Foxit Software's Foxit PDF Reader version 9.1.0.5096. A specially crafted PDF document can trigger a previously freed object in memory to be reused, resulting in arbitrary code execution. An attacker needs to trick the user to open the malicious file to trigger this vulnerability. If the browser plugin extension is enabled, visiting a malicious site can also trigger the vulnerability.

An issue in the HuginBase::ImageVariable<double>::linkWith function of Hugin v2022.0.0 allows attackers to cause a heap-use-after-free via parsing a crafted image.

A use-after-free issue was addressed with improved memory management. This issue is fixed in GarageBand 10.4.11. Processing a maliciously crafted file may lead to unexpected app termination or arbitrary code execution.

A maliciously crafted CATPART, STP, and MODEL file, when parsed in atf_dwg_consumer.dll, rose_x64_vc15.dll and libodxdll through Autodesk applications, can cause a use-after-free vulnerability. This vulnerability, along with other vulnerabilities, can lead to code execution in the current process.

swftools 0.9.2 was discovered to contain a heap-use-after-free via the function bufferWriteData in swftools/lib/action/compile.c.

The __ext4_journal_stop function in fs/ext4/ext4_jbd2.c in the Linux kernel before 4.3.3 allows local users to gain privileges or cause a denial of service (use-after-free) by leveraging improper access to a certain error field.

A maliciously crafted IGS file in tbb.dll when parsed through Autodesk AutoCAD can be used in user-after-free vulnerability. This vulnerability, along with other vulnerabilities, could lead to code execution in the current process.

A maliciously crafted SLDPRT file in ASMkern228A.dll when parsed through Autodesk applications can be used in user-after-free vulnerability. This vulnerability, along with other vulnerabilities, could lead to code execution in the current process.

A maliciously crafted IGES file, when parsed in ASMImport229A.dll through Autodesk applications, can be used to cause a use-after-free vulnerability. A malicious actor can leverage this vulnerability to cause a crash or execute arbitrary code in the context of the current process.

A heap-use-after-free was found in SWFTools v0.9.2, in the function swf_DeleteTag at rfxswf.c:1193. It allows an attacker to cause code execution.

swftools 0.9.2 was discovered to contain a heap-use-after-free vulnerability via the function removeFromTo at swftools/src/swfc.c:838

A maliciously crafted PRT file, when parsed through certain Autodesk products, can force a Use-After-Free vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.

Illustrator versions 28.4, 27.9.3 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Adobe Framemaker versions 2020.8, 2022.6 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

IrfanView DXF File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of IrfanView. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of DXF files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-24709.

Use-after-free vulnerability in the GIFReadNextExtension function in lib/pngxtern/gif/gifread.c in OptiPNG 0.6.2 and earlier allows context-dependent attackers to cause a denial of service (application crash) via a crafted GIF image that causes the realloc function to return a new pointer, which triggers memory corruption when the old pointer is accessed.