A security flaw has been discovered in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected is the function sta_wps_pin of the file /goform/sta_wps_pin. Performing manipulation of the argument Ssid results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setRIP of the file /goform/setRIP. The manipulation of the argument RIPmode/RIPpasswd leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This vulnerability affects the function setDMZ of the file /goform/setDMZ. The manipulation of the argument DMZIPAddress leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This impacts the function portRangeForwardAdd of the file /goform/portRangeForwardAdd. The manipulation of the argument ruleName/schedule/inboundFilter/TCPPorts/UDPPorts results in stack-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function DisablePasswordAlertRedirect of the file /goform/DisablePasswordAlertRedirect. Executing manipulation of the argument hint can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function langSwitchBack of the file /goform/langSwitchBack. The manipulation of the argument langSelectionOnly leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This impacts the function setPWDbyBBS of the file /goform/setPWDbyBBS. Such manipulation of the argument hint leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. The affected element is the function ipRangeBlockManageRule of the file /goform/ipRangeBlockManageRule. Performing manipulation of the argument ipRangeBlockRuleName/scheduleIp/ipRangeBlockRuleIpAddr results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function inboundFilterAdd of the file /goform/inboundFilterAdd. Executing manipulation of the argument ruleName can lead to stack-based buffer overflow. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Linksys E8450 up to 1.2.00.360516. This affects the function set_device_language of the file portal.cgi of the component HTTP POST Request Handler. The manipulation of the argument dut_language leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys WRT1900ACS, EA7200, EA7450 and EA7500 up to 20250619 and classified as critical. This vulnerability affects the function SetDefaultConnectionService of the file /upnp/control/Layer3Forwarding of the component IGD. The manipulation of the argument NewDefaultConnectionService leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A stack-based buffer overflow vulnerability exists in the Web Manager SslGenerateCSR functionality of Lantronix PremierWave 2050 8.9.0.0R4 (in QEMU). A specially crafted HTTP request can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Heap-based buffer overflow in IBM WebSphere MQ 6.0 before 6.0.2.11 and 7.0 before 7.0.1.5 allows remote authenticated users to execute arbitrary code or cause a denial of service (queue manager crash) by inserting an invalid message into the queue.

Multiple stack-based buffer overflows in the IMAP server component in GroupWise Internet Agent (GWIA) in Novell GroupWise before 8.02HP allow remote attackers to execute arbitrary code via a long (1) LIST or (2) LSUB command.

A vulnerability classified as critical was found in Tenda AC6 US_AC6V1.0BR_V15.03.05.19. Affected by this vulnerability is the function fromDhcpListClient. The manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-230077 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Buffer overflow in programs/pluto/xauth.c in the client in Openswan 2.6.25 through 2.6.28 might allow remote authenticated gateways to execute arbitrary code or cause a denial of service via long (1) cisco_dns_info or (2) cisco_domain_info data in a packet.

Dameng DM Database Server allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via unspecified vectors related to the SP_DEL_BAK_EXPIRED procedure in wdm_dll.dll, which triggers memory corruption.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

Geo++ GNCASTER 1.4.0.7 and earlier allows remote authenticated users to cause a denial of service (application crash) and possibly execute arbitrary code via a long NMEA data sentence.

Heap-based buffer overflow in IBM DB2 9.1 before FP9, 9.5 before FP6, and 9.7 before FP2 allows remote authenticated users to have an unspecified impact via a SELECT statement that has a long column name generated with the REPEAT function.

Tenda FH1202 v1.2.0.14(408) firmware has a stack overflow vulnerability via the PPW parameter in the fromWizardHandle function.

Tenda W30E v1.0 V1.0.1.25(633) firmware has a stack overflow vulnerability located via the page parameter in the fromwebExcptypemanFilter function.

In Tensorflow version 2.3.0, the `SparseCountSparseOutput` and `RaggedCountSparseOutput` implementations don't validate that the `weights` tensor has the same shape as the data. The check exists for `DenseCountSparseOutput`, where both tensors are fully specified. In the sparse and ragged count weights are still accessed in parallel with the data. But, since there is no validation, a user passing fewer weights than the values for the tensors can generate a read from outside the bounds of the heap buffer allocated for the weights. The issue is patched in commit 3cbb917b4714766030b28eba9fb41bb97ce9ee02 and is released in TensorFlow version 2.3.1.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the implementation of `SparseFillEmptyRowsGrad` uses a double indexing pattern. It is possible for `reverse_index_map(i)` to be an index outside of bounds of `grad_values`, thus resulting in a heap buffer overflow. The issue is patched in commit 390611e0d45c5793c7066110af37c8514e6a6c54, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

Double free vulnerability in tif_jpeg.c in libtiff before 3.8.1 allows context-dependent attackers to cause a denial of service (crash) and possibly execute arbitrary code via a crafted TIFF image that triggers errors related to "setfield/getfield methods in cleanup functions."

An exploitable buffer overflow vulnerability exists in the PubNub message handler for the "control" channel of Insteon Hub running firmware version 1012. Specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. A strcpy overflows the buffer insteon_pubnub.channel_cc_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "c_r" parameter in order to exploit this vulnerability. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability.

TRENDnet TEW-827DRU devices through 2.06B04 contain a stack-based buffer overflow in the ssi binary. The overflow allows an authenticated user to execute arbitrary code by POSTing to apply.cgi via the action wizard_ipv6 with a sufficiently long reboot_type key.

IBM Domino 8.5.3, and 9.0 is vulnerable to a stack based overflow in the IMAP service that could allow an authenticated attacker to execute arbitrary code by specifying a large mailbox name. IBM X-Force ID: 124749.

Heap-based buffer overflow in the SMB implementation in NetApp Clustered Data ONTAP before 8.3.2P8 and 9.0 before P2 allows remote authenticated users to cause a denial of service or execute arbitrary code.

In the X.Org X server before 2017-06-19, a user authenticated to an X Session could crash or execute code in the context of the X Server by exploiting a stack overflow in the endianness conversion of X Events.

Use of Out-of-range Pointer Offset in GitHub repository vim/vim prior to 8.2.4440.

Heap-based buffer overflow in the IMAP service in Qbik WinGate 6.2.2.1137 and earlier allows remote authenticated users to cause a denial of service (resource exhaustion) or possibly execute arbitrary code via a long argument to the LIST command. NOTE: some of these details are obtained from third party information.

Multiple stack-based buffer overflows in the ServerView web interface (SnmpGetMibValues.exe) in Fujitsu Siemens Computers ServerView 04.60.07 and earlier allow remote authenticated users to execute arbitrary code via a crafted URL.

Buffer overflow in tibemsd in the server in TIBCO Enterprise Message Service (EMS) before 8.3.0 and EMS Appliance before 2.4.0 allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via crafted inbound data.

Stack-based buffer overflow in the IMAP server in Alt-N Technologies MDaemon 9.6.4 allows remote authenticated users to execute arbitrary code via a FETCH command with a long BODY.

A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Apache PLC4X - PLC4C (Only the C language implementation was effected) was vulnerable to an unsigned integer underflow flaw inside the tcp transport. Users should update to 0.9.1, which addresses this issue. However, in order to exploit this vulnerability, a user would have to actively connect to a mallicious device which could send a response with invalid content. Currently we consider the probability of this being exploited as quite minimal, however this could change in the future, especially with the industrial networks growing more and more together.

Vyper is a Pythonic Smart Contract Language for the EVM. In affected versions when performing a function call inside a literal struct, there is a memory corruption issue that occurs because of an incorrect pointer to the the top of the stack. This issue has been resolved in version 0.3.0.

A vulnerability classified as critical has been found in emqx neuron up to 2.10.0. Affected is the function handle_add_plugin in the library cmd.library of the file plugins/restful/plugin_handle.c. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. It is recommended to apply a patch to fix this issue.

A vulnerability was found in Tenda W9 1.0.0.7(4456). It has been classified as critical. Affected is the function formOfflineSet of the component httpd. The manipulation of the argument ssidIndex leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-250710 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The affected product’s code base doesn’t properly control arguments for specific functions, which could lead to a stack overflow.

A vulnerability, which was classified as critical, has been found in Totolink N350RT 9.3.5u.6139_B20201216. Affected by this issue is the function main of the file /cgi-bin/cstecgi.cgi?action=login of the component HTTP POST Request Handler. The manipulation of the argument v8 leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249770 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Stack-based buffer overflow in Live for Speed 0.5X10 and earlier allows remote authenticated users to cause a denial of service (client crash) and possibly execute arbitrary code via a long skin name.

Buffer overflow in the C_SAPGPARAM function in the NetWeaver Dispatcher in SAP KERNEL 7.00 (7000.52.12.34966) and 7.40 (7400.12.21.30308) allows remote authenticated users to cause a denial of service or possibly execute arbitrary code via unspecified vectors, aka SAP Security Note 2063369.

Multiple buffer overflows in the DBMail driver in the Password plugin in Roundcube before 1.1.0 allow remote attackers to have unspecified impact via the (1) password or (2) username.

Heap-based buffer overflow in chrony before 1.31.1 allows remote authenticated users to cause a denial of service (chronyd crash) or possibly execute arbitrary code by configuring the (1) NTP or (2) cmdmon access with a subnet size that is indivisible by four and an address with a nonzero bit in the subnet remainder.

Multiple camera devices by UDP Technology, Geutebrück and other vendors are vulnerable to a stack-based buffer overflow condition in the counter parameter which may allow an attacker to remotely execute arbitrary code.

Multiple buffer overflows in the IMAP service (imapd32.exe) in Ipswitch IMail Server 2006 before 2006.21 allow remote authenticated users to execute arbitrary code via the (1) Search or (2) Search Charset command.