A security vulnerability has been detected in Edimax EW-7438RPn 1.31. The impacted element is the function formWlanMP of the file /goform/formWlanMP. The manipulation of the argument ateFunc/ateGain/ateTxCount/ateChan/ateRate/ateMacID/e2pTxPower1/e2pTxPower2/e2pTxPower3/e2pTxPower4/e2pTxPower5/e2pTxPower6/e2pTxPower7/e2pTx2Power1/e2pTx2Power2/e2pTx2Power3/e2pTx2Power4/e2pTx2Power5/e2pTx2Power6/e2pTx2Power7/ateTxFreqOffset/ateMode/ateBW/ateAntenna/e2pTxFreqOffset/e2pTxPwDeltaB/e2pTxPwDeltaG/e2pTxPwDeltaMix/e2pTxPwDeltaN/readE2P leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Edimax BR-6675nD 1.12. The impacted element is the function formWlSiteSurvey of the file /goform/formWlSiteSurvey of the component POST Request Handler. This manipulation of the argument selSSID causes buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax EW-7438RPn 1.28a. Affected by this issue is the function formwlencrypt24g of the file /goform/formwlencrypt24g of the component POST Request Handler. The manipulation of the argument key1 results in buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Edimax BR-6428NS 1.10. This affects the function formL2TPSetup of the file /goform/formL2TPSetup of the component POST Request Handler. This manipulation of the argument L2TPUserName causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax BR-6675nD 1.12. Affected is the function formL2TPSetup of the file /goform/formL2TPSetup of the component POST Request Handler. Such manipulation of the argument L2TPUserName leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Edimax EW-7438RPn 1.31. This impacts the function formWlSiteSurvey of the file /goform/formWlSiteSurvey of the component webs. This manipulation of the argument selSSID/submit-url causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax EW-7438RPn 1.31. The affected element is the function formLogout of the file /goform/formLogout. The manipulation of the argument submit-url leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax EW-7438RPn 1.31. This affects the function formConnectionSetting of the file /goform/formConnectionSetting. Performing a manipulation of the argument max_Conn/timeOut results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Edimax BR-6675nD 1.12. Impacted is the function formWanTcpipSetup of the file /goform/formWanTcpipSetup of the component POST Request Handler. The manipulation of the argument pppUserName leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax EW-7438RPn 1.31. The impacted element is the function formrefresh of the file /goform/formrefresh. The manipulation of the argument submit-url results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Edimax BR-6478AC 1.23. This affects the function formiNICSiteSurvey of the file /goform/formiNICSiteSurvey of the component POST Request Handler. Executing a manipulation of the argument selSSID can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax EW-7438RPn up to 1.31. The impacted element is an unknown function of the file /goform/formWpsStart of the component webs. Such manipulation of the argument pinCode/wlan-url leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax BR-6675nD 1.12. Affected by this vulnerability is the function formPPPoESetup of the file /goform/formPPPoESetup of the component POST Request Handler. Performing a manipulation of the argument pppUserName results in buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Edimax EW-7438RPn 1.31. This impacts the function formAccept of the file /goform/formAccept. Executing a manipulation of the argument submit-url can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Edimax EW-7438RPn up to 1.31. This impacts the function formWirelessTbl of the file /goform/formWirelessTbl of the component webs. Executing a manipulation of the argument submit-url can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Edimax EW-7438RPn 1.31. This affects the function formStats of the file /goform/formStats. This manipulation of the argument submit-url causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax EW-7438RPn 1.31. This affects the function formHwSet of the file /goform/formHwSet. The manipulation of the argument Anntena/Mcs/regDomain/nic0Addr/nic1Addr/wlanAddr/wanAddr/wlanSSID/wlanChan/initgain/txcck/txofdm/submit-url results in stack-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Edimax EW-7438RPn 1.31. Affected by this issue is the function formLicence of the file /goform/formLicence. This manipulation of the argument submit-url causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Edimax EW-7438RPn 1.31. This impacts the function formSDHCP of the file /goform/formSDHCP. Such manipulation of the argument submit-url leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax BR-6675nD 1.12. This vulnerability affects the function formsetPPPoE of the file /goform/formsetPPPoE of the component POST Request Handler. Performing a manipulation of the argument pppUserName results in buffer overflow. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax BR-6478AC 1.23. This vulnerability affects the function formL2TPSetup of the file /goform/formL2TPSetup of the component POST Request Handler. The manipulation of the argument L2TPUserName leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax EW-7438RPn 1.31. Affected by this vulnerability is the function formWpsProxyEnable of the file /goform/formWpsProxyEnable. The manipulation of the argument submit-url results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Edimax BR-6428NS 1.10. The impacted element is the function formWanTcpipSetup of the file /goform/formWanTcpipSetup of the component POST Request Handler. Such manipulation of the argument pppUserName leads to buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Edimax EW-7438RPn up to 1.31. Affected by this vulnerability is an unknown functionality of the file /goform/mp of the component webs. The manipulation of the argument webs results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax EW-7438RPn up to 1.31. This affects the function formWizSurvey of the file /goform/formWizSurvey of the component webs. Performing a manipulation of the argument ssid/manualssid/ip/mask/gateway results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax BR-6478AC 1.23. Affected by this issue is the function formQoS of the file /goform/formQoS of the component POST Request Handler. The manipulation of the argument selSSID results in buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

A security vulnerability has been detected in Edimax EW-7438RPn 1.31. Affected is the function formRadius of the file /goform/formRadius. The manipulation of the argument submit-url leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Edimax BR-6428NS 1.10. This affects the function formWirelessTbl of the file /goform/formWirelessTbl of the component POST Request Handler. Performing a manipulation of the argument vapurl results in buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Edimax BR-6675nD 1.12. Affected by this issue is the function formPPTPSetup of the file /goform/formPPTPSetup of the component POST Request Handler. Executing a manipulation of the argument pptpUserName can lead to buffer overflow. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Edimax BR-6428NS 1.10. This vulnerability affects the function formPPTPSetup of the file /goform/formPPTPSetup of the component POST Request Handler. Such manipulation of the argument pptpUserName leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Edimax BR-6208AC up to 1.02. Affected is an unknown function of the file /goform/setWAN. Performing a manipulation of the argument pptpDfGateway  results in buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Edimax BR-6428nC up to 1.16. This impacts an unknown function of the file /goform/setWAN. Such manipulation of the argument pptpDfGateway  leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability exists in the Edimax EW-7438RPn Mini firmware version 1.13 and prior via the syscmd.asp form handler. The /goform/formSysCmd endpoint exposes a system command interface through the sysCmd parameter. A remote authenticated attacker can submit arbitrary shell commands directly, resulting in command execution as the root user. Exploitation evidence was observed by the Shadowserver Foundation on 2024-09-14 UTC.

An OS command injection vulnerability exists in the Edimax EW-7438RPn firmware version 1.13 and prior via the mp.asp form handler. The /goform/mp endpoint improperly handles user-supplied input to the command parameter. An authenticated attacker can inject shell commands using shell metacharacters to achieve arbitrary command execution as the root user. Exploitation evidence was observed by the Shadowserver Foundation on 2024-09-14 UTC.

A vulnerability has been found in Tenda F1202 1.2.0.20(408). Affected is the function fromPPTPUserSetting of the file /goform/PPTPUserSetting. Such manipulation of the argument delno leads to stack-based buffer overflow. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in Totolink EX1800T 9.1.0cu.2112_B20220316 and classified as critical. This vulnerability affects the function loginAuth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Tenda CH22 1.0.0.1. Affected is the function formWrlExtraGet of the file /goform/WrlExtraGet. Performing a manipulation of the argument chkHz results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used.

A vulnerability was determined in Tenda F1202 1.2.0.20(408). Affected by this issue is the function formGstDhcpSetSer of the file /goform/GstDhcpSetSerof. Executing a manipulation of the argument dips can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.

Buffer overflow in IBM Informix 11.50 through 11.50.xC9W2 and 11.70 before 11.70.xC7 allows remote authenticated users to execute arbitrary code via a crafted SQL statement.

A vulnerability was found in D-Link DCS-935L up to 1.10.01. The impacted element is the function SetDeviceSettings of the file /web/cgi-bin/hnap/hnap_service of the component HNAP Service. The manipulation of the argument AdminPassword results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

A vulnerability was determined in UTT 进取 512W up to 1.7.7-171114. This issue affects the function strcpy of the file /goform/formPictureUrl. This manipulation of the argument importpictureurl causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was determined in D-Link DIR-816L 2_06_b09_beta. This issue affects the function soapcgi_main of the file /soap.cgi. This manipulation causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in UTT HiPER 1250GW up to 3.2.7-210907-180535. Affected by this issue is the function strcpy of the file /goform/formGroupConfig of the component Web Management Interface. Executing a manipulation of the argument Profile can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used.

A security vulnerability has been detected in Tenda AC23 16.03.07.52. Affected is the function saveParentControlInfo of the file /goform/saveParentControlInfo. Such manipulation of the argument Time leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

A vulnerability classified as critical was found in D-Link DAP-1320 1.00. Affected by this vulnerability is the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Tenda M3 1.0.0.13(4903). The impacted element is an unknown function of the file /goform/exeCommand. Such manipulation of the argument cmdinput leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda CX12L 16.03.53.12. This issue affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg”. The manipulation results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

A weakness has been identified in UTT HiPER 1200GW up to 2.5.3-170306. Affected is an unknown function of the file /goform/formPptpClientConfig of the component Web Management Interface. This manipulation of the argument PPTP server address/username/password/tunnel name causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in UTT HiPER 1200GW up to 2.5.3-170306. This impacts the function strcpy of the file /goform/setSysAdm of the component Web Management Interface. The manipulation of the argument sysAdmUser/sysAdmPass results in buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was detected in Tenda AC20 up to 16.03.08.12. The impacted element is an unknown function of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.