In DayByDay CRM, versions 2.2.0 through 2.2.1 (latest) are vulnerable to Insufficient Session Expiration. When a password has been changed by the user or by an administrator, a user that was already logged in, will still have access to the application even after the password was changed.
In DayByDay CRM, version 2.2.0 is vulnerable to missing authorization. Any application user in the application who has update user permission enabled is able to change the password of other users, including the administrator’s. This allows the attacker to gain access to the highest privileged user in the application.
Huawei iBMC V200R002C60 have an authentication bypass vulnerability. A remote attacker with low privilege may craft specific messages to upload authentication certificate to the affected products. Due to improper validation of the upload authority, successful exploit may cause privilege elevation.
VMware Horizon DaaS (7.x before 8.0.0) contains a broken authentication vulnerability that may allow an attacker to bypass two-factor authentication. Note: In order to exploit this issue, an attacker must have a legitimate account on Horizon DaaS.
A Remote Authentication bypass in Aruba ClearPass Policy Manager leads to complete cluster compromise. An authentication flaw in all versions of ClearPass could allow an attacker to compromise the entire cluster through a specially crafted API call. Network access to the administrative web interface is required to exploit this vulnerability. Resolution: Fixed in 6.7.6 and 6.6.10-hotfix.
Glewlwyd 2.0.0, fixed in 2.6.1 is affected by an incorrect access control vulnerability. One user can attempt to log in as another user without its password.
Jenkins versions 2.56 and earlier as well as 2.46.1 LTS and earlier are vulnerable to a login command which allowed impersonating any Jenkins user. The `login` command available in the remoting-based CLI stored the encrypted user name of the successfully authenticated user in a cache file used to authenticate further commands. Users with sufficient permission to create secrets in Jenkins, and download their encrypted values (e.g. with Job/Configure permission), were able to impersonate any other Jenkins user on the same instance.
An issue was discovered in Mattermost Server before 4.7.0, 4.6.2, and 4.5.2. An attacker could authenticate to a different user's account via a crafted SAML response.
A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428.
The Service Component Architecture (SCA) feature pack for IBM WebSphere Application Server (WAS) SCA 1.0 before 1.0.0.3 allows remote authenticated users to bypass intended authentication.transport access restrictions and obtain unspecified access via unknown vectors.
HKUDS OpenHarness prior to PR #159 remediation contains a session key derivation vulnerability that allows authenticated participants in shared chats or threads to hijack other users' sessions by exploiting a shared ohmo session key that lacks sender identity verification. Attackers can reuse another user's conversation state and replace or interrupt their active tasks by colliding into the same session boundary through the shared chat or thread scope.
IBM WebSphere Partner Gateway (WPG) 6.0.0 through 6.0.0.7 does not properly handle failures of signature verification, which might allow remote authenticated users to submit a crafted RosettaNet (aka RNIF) document to a backend application, related to (1) "altered service content" and (2) "digital signature foot-print."
As of v1.5.0, the default admin password is set to the argocd-server pod name. For insiders with access to the cluster or logs, this issue could be abused for privilege escalation, as Argo has privileged roles. A malicious insider is the most realistic threat, but pod names are not meant to be kept secret and could wind up just about anywhere.
A certain Red Hat patch for SquirrelMail 1.4.8 sets the same SQMSESSID cookie value for all sessions, which allows remote authenticated users to access other users' folder lists and configuration data in opportunistic circumstances by using the standard webmail.php interface. NOTE: this vulnerability exists because of an incorrect fix for CVE-2008-3663.
The FusionSphere OpenStack V100R006C00SPC102(NFV) has an improper authentication vulnerability. Due to improper authentication on one port, an authenticated, remote attacker may exploit the vulnerability to execute more operations by send a crafted rest message.
In firmware version MS_2.6.9900 of Columbia Weather MicroServer, an authenticated web user can access an alternative configuration page config_main.php that allows manipulation of the device.
modules/admuser.php in myGesuad 0.9.14 (aka 0.9) does not require administrative authentication, which allows remote authenticated users to list user accounts via a Find action.
An attacker that has hijacked a Unitrends Enterprise Backup (before 9.1.2) web server session can leverage api/includes/users.php to change the password of the logged in account without knowing the current password. This allows for an account takeover.
An Authentication Bypass vulnerability in the SAML Authentication component of BlackBerry Workspaces Server (deployed with Appliance-X) version(s) 10.1, 9.1 and earlier could allow an attacker to potentially gain access to the application in the context of the targeted user’s account.
Session fixation vulnerability in phpFreeChat 1.1 allows remote authenticated users to hijack web sessions by setting the session_id parameter to match the victim's nickid parameter.
Unspecified vulnerability in the Sun Java System Web Server 7.0 plugin in Sun N1 Service Provisioning System (SPS) 5.2 and 6.0 allows remote authenticated SPS users to gain administrative access to the web server via unknown attack vectors.
A vulnerability in Cisco WebEx Meetings Server could allow an authenticated, remote attacker to conduct arbitrary password changes against any non-administrative user. More Information: CSCuz03345. Known Affected Releases: 2.6. Known Fixed Releases: 2.7.1.12.
Siemens RUGGEDCOM ROX I (all versions) allow an authenticated user to bypass access restrictions in the web interface at port 10000/TCP to obtain privileged file system access or change configuration settings.
cp_memberedit.php in LightBlog 8.4.1.1 does not check for administrative credentials when processing an admin action, which allows remote authenticated users to increase the privileges of any account.
The API on Fisher-Price Smart Toy Bear devices allows remote attackers to obtain sensitive information or modify data by leveraging presence in an 802.11 network's coverage area and entering an account number.
eLabFTW is an electronic lab notebook manager for research teams. In versions prior to 4.2.0 there is a vulnerability which allows any authenticated user to gain access to arbitrary accounts by setting a specially crafted email address. This vulnerability impacts all instances that have not set an explicit email domain name allowlist. Note that whereas neither administrators nor targeted users are notified of a change, an attacker will need to control an account. The default settings require administrators to validate newly created accounts. The problem has been patched. Users should upgrade to at least version 4.2.0. For users unable to upgrade enabling an email domain allow list (from Sysconfig panel, Security tab) will completely resolve the issue.
IBM WebSphere Portal 7.0, 8.0, 8.5, and 9.0 may fail to set the correct user context in certain impersonation scenarios, which can allow a user to act with the identity of a different user. IBM X-Force ID: 144958.
In Apache Zeppelin prior to 0.8.0 the cron scheduler was enabled by default and could allow users to run paragraphs as other users without authentication.
cPanel before 55.9999.141 does not perform as two-factor authentication check when possessing another account (SEC-101).
An issue was discovered in Barrier before 2.4.0. The barriers component (aka the server-side implementation of Barrier) does not sufficiently verify the identify of connecting clients. Clients can thus exploit weaknesses in the provided protocol to cause denial-of-service or stage further attacks that could lead to information leaks or integrity corruption.
An Access Control vulnerability exists in Nacos 2.0.3 in the access prompt page; enter username and password, click on login to capture packets and then change the returned package, which lets a malicious user login.
Authentication vulnerability found in Dahua NVR models NVR50XX, NVR52XX, NVR54XX, NVR58XX with software before DH_NVR5xxx_Eng_P_V2.616.0000.0.R.20171102. Attacker could exploit this vulnerability to gain access to additional operations by means of forging json message.
The SASL authentication functionality in 389 Directory Server before 1.2.11.26 allows remote authenticated users to connect as an arbitrary user and gain privileges via the authzid parameter in a SASL/GSSAPI bind.
In GitLab before 13.0.12, 13.1.6, and 13.2.3, improper access control was used on the Applications page
The affected product is vulnerable to a missing permission validation on system backup restore, which could lead to account take over and unapproved settings change.
A vulnerability was found in SourceCodester Company Website CMS 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /dashboard/settings. The manipulation leads to improper authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-206161 was assigned to this vulnerability.
October is a Content Management System (CMS) and web platform built on the the Laravel PHP Framework. In affected versions administrator accounts which had previously been deleted may still be able to sign in to the backend using October CMS v2.0. The issue has been patched in v2.1.12 of the october/october package. There are no workarounds for this issue and all users should update.
An authentication issue was addressed with improved state management. This issue is fixed in macOS Mojave 10.14.5. A user may be unexpectedly logged in to another user’s account.
A flaw was found in SSSD version 1.9.0. The SSSD's access-provider logic causes the result of the HBAC rule processing to be ignored in the event that the access-provider is also handling the setup of the user's SELinux user context.
Improper access control vulnerability has been identified in the SMA100 SSL-VPN virtual office portal, which in specific conditions could potentially enable a remote authenticated attacker to associate another user's MFA mobile application.
A vulnerability was detected in badlogic pi-mono up to 0.58.4. This issue affects some unknown processing of the file packages/mom/src/slack.ts of the component pi-mom Slack Bot. The manipulation results in authentication bypass using alternate channel. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in Apereo CAS 6.6. It has been classified as critical. This affects an unknown part of the file /login?service of the component 2FA. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
django-mfa3 is a library that implements multi factor authentication for the django web framework. It achieves this by modifying the regular login view. Django however has a second login view for its admin area. This second login view was not modified, so the multi factor authentication can be bypassed. Users are affected if they have activated both django-mfa3 (< 0.5.0) and django.contrib.admin and have not taken any other measures to prevent users from accessing the admin login view. The issue has been fixed in django-mfa3 0.5.0. It is possible to work around the issue by overwriting the admin login route, e.g. by adding the following URL definition *before* the admin routes: url('admin/login/', lambda request: redirect(settings.LOGIN_URL)
An issue was discovered in Centreon Web through 19.04.3. When a user changes his password on his profile page, the contact_autologin_key field in the database becomes blank when it should be NULL. This makes it possible to partially bypass authentication.
Search Guard Kibana Plugin versions before 5.6.8-7 and before 6.x.y-12 had an issue that an authenticated Kibana user could impersonate as kibanaserver user when providing wrong credentials when all of the following conditions a-c are true: a) Kibana is configured to use Single-Sign-On as authentication method, one of Kerberos, JWT, Proxy, Client certificate. b) The kibanaserver user is configured to use HTTP Basic as the authentication method. c) Search Guard is configured to use an SSO authentication domain and HTTP Basic at the same time
Nextcloud is an open source content collaboration platform. In Nextcloud Server from versions 32.0.0 to before 32.0.2, and 33.0.0 to before 33.0.1, the files_lock app did not properly validate the ownership of files when processing DAV lock and unlock requests. An authenticated user could lock or unlock files belonging to other users by targeting their absolute WebDAV paths. Additionally, lock tokens were disclosed to unauthorized callers in error responses, allowing attackers to remove token-based locks placed by other users' client applications. It is recommended that the Nextcloud Server is upgraded to 32.0.2 or 33.0.1. It is recommended that the Nextcloud Enterprise Server is upgraded to 31.0.14.4 or 32.0.2 or 33.0.1
jsonwebtoken is an implementation of JSON Web Tokens. Versions `<= 8.5.1` of `jsonwebtoken` library can be misconfigured so that passing a poorly implemented key retrieval function referring to the `secretOrPublicKey` argument from the readme link will result in incorrect verification of tokens. There is a possibility of using a different algorithm and key combination in verification, other than the one that was used to sign the tokens. Specifically, tokens signed with an asymmetric public key could be verified with a symmetric HS256 algorithm. This can lead to successful validation of forged tokens. If your application is supporting usage of both symmetric key and asymmetric key in jwt.verify() implementation with the same key retrieval function. This issue has been patched, please update to version 9.0.0.
capsule-proxy is a reverse proxy for Capsule Operator which provides multi-tenancy in Kubernetes. In versions prior to 0.2.1 an attacker with a proper authentication mechanism may use a malicious `Connection` header to start a privilege escalation attack towards the Kubernetes API Server. This vulnerability allows for an exploit of the `cluster-admin` Role bound to `capsule-proxy`. There are no known workarounds for this issue.
There is an authentication bypass vulnerability in some Huawei servers. A remote attacker with low privilege may bypass the authentication by some special operations. Due to insufficient authentication, an attacker may exploit the vulnerability to get some sensitive information and high-level users' privilege.
A vulnerability has been identified in TeleControl Server Basic < V3.1. An authenticated attacker with a low-privileged account to the TeleControl Server Basic's port 8000/tcp could escalate his privileges and perform administrative operations.