A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device. This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device.
A vulnerability in the implementation of access control rules for loopback interfaces in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should have been blocked to a loopback interface. This vulnerability is due to improper enforcement of access control rules for loopback interfaces. An attacker could exploit this vulnerability by sending traffic to a loopback interface on an affected device. A successful exploit could allow the attacker to bypass configured access control rules and send traffic that should have been blocked to a loopback interface on the device.
An Incorrect Access Control vulnerability was found in /smsa/add_class.php and /smsa/add_class_submit.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to add a new class entry.
A vulnerability was found in Tenda FH1202 1.2.0.14(408). It has been rated as critical. This issue affects some unknown processing of the file /goform/wrlwpsset. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
An Incorrect Access Control vulnerability was found in /smsa/add_subject.php and /smsa/add_subject_submit.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to add a new subject entry.
A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query.
A vulnerability in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. This vulnerability is due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit this vulnerability by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should trigger and drop for the ENIP packet.
An issue was discovered in Siren Investigate before 12.1.7. There is an ACL bypass on global objects.
Dell Wyse Management Suite 3.6.1 and below contains an Improper Access control vulnerability with which an attacker with no access to create rules could potentially exploit this vulnerability and create rules.
The Docker image of ownCloud Server through 10.11 contains a misconfiguration that renders the trusted_domains config useless. This could be abused to spoof the URL in password-reset e-mail messages.
Gitea versions before 1.25.5 have insufficient permission checks when listing tracked time entries.
An incorrect permission assignment vulnerability allows an attacker to modify product configuration files.
A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device.
PowerJob V4.3.1 is vulnerable to Incorrect Access Control via the create app interface.
An improper access control in LiveWallpaperService prior to versions 3.0.9.0 allows to create a specific named system directory without a proper permission.
Mattermost versions 9.5.x <= 9.5.5 and 9.8.0, when using shared channels with multiple remote servers connected, fail to check that the remote server A requesting the server B to update the profile picture of a user is the remote that actually has the user as a local one . This allows a malicious remote A to change the profile images of users that belong to another remote server C that is connected to the server A.
Unauth. Plugin Settings Change vulnerability in Modula plugin <= 2.6.9 on WordPress.
Vulnerability in Oracle REST Data Services (component: Core). Supported versions that are affected are 24.2.0-26.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle REST Data Services. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle REST Data Services accessible data. CVSS 3.1 Base Score 5.3 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N).
An issue in Mojoportal v2.7.0.0 allows an unauthenticated attacker to register a new user even if the Allow User Registrations feature is disabled.
Spring WebFlux applications may be vulnerable to a security bypass when using the Kotlin Router DSL. Affected versions: Spring Framework 5.3.0 through 5.3.48.
An issue was discovered in Gajim through 1.4.7. The vulnerability allows attackers, via crafted XML stanzas, to correct messages that were not sent by them. The attacker needs to be part of the group chat or single chat. The fixed version is 1.5.0.
Insufficient policy enforcement in PDF in Google Chrome prior to 146.0.7680.71 allowed a remote attacker to bypass navigation restrictions via a crafted PDF file. (Chromium security severity: Low)
Vulnerability in the Oracle Access Manager product of Oracle Fusion Middleware (component: Authentication Engine). The supported version that is affected is 12.2.1.3.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Access Manager. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Access Manager accessible data. CVSS 3.1 Base Score 5.3 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N).
Lobe Chat is a chatbot framework that supports speech synthesis, multimodal, and extensible Function Call plugin system. When the application is password-protected (deployed with the `ACCESS_CODE` option), it is possible to access plugins without proper authorization (without password). This vulnerability is patched in 0.122.4.
A vulnerability has been found in keerti1924 PHP-MYSQL-User-Login-System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /edit.php. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-254389 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Unicorn adds modern reactive component functionality to your Django templates. Prior to 0.67.0, component state manipulation is possible in django-unicorn due to missing access control checks during property updates and method calls. An attacker can bypass the intended _is_public protection to modify internal attributes such as template_name or trigger protected methods. This vulnerability is fixed in 0.67.0.
A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials. SNMP with IPv6 ACL configurations is not affected. For more information, see the section of this advisory.
The Analytify – Google Analytics Dashboard For WordPress (GA4 analytics made easy) plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'wpa_check_authentication' function in all versions up to, and including, 5.2.1. This makes it possible for unauthenticated attackers to modify the site's Google Analytics tracking ID.
A vulnerability classified as critical was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. This vulnerability affects unknown code of the file /goform/DDNS of the component DDNS Service. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability has been found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/form2Dhcpd.cgi of the component DHCPD Setting Handler. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210 and classified as critical. Affected by this issue is some unknown functionality of the file /goform/form2IPQoSTcAdd of the component IP QoS Handler. The manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was determined in yeqifu warehouse up to aaf29962ba407d22d991781de28796ee7b4670e4. This vulnerability affects the function addInport/updateInport/deleteInport of the file dataset\repos\warehouse\src\main\java\com\yeqifu\bus\controller\InportController.java of the component Inport Endpoint. Executing a manipulation can lead to improper access controls. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet.
The Tutor LMS plugin for WordPress is vulnerable to bypass to user registration in versions up to, and including, 2.7.6. This is due to a missing check for the 'users_can_register' option in the 'register_instructor' function. This makes it possible for unauthenticated attackers to register as the default role on the site, even if registration is disabled.
The Customer Reviews for WooCommerce plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'submit_review' function in all versions up to, and including, 5.38.12. This makes it possible for unauthenticated attackers to submit reviews with arbitrary email addresses regardless of whether reviews are globally enabled.
Insufficient policy enforcement in DevTools in Google Chrome prior to 146.0.7680.71 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Low)
Insufficient web service capability checks made it possible to move categories a user had permission to manage, to a parent category they did not have the capability to manage.
OpenProject is an open-source, web-based project management software. Prior to versions 17.0.5 and 17.1.2, an attacker can create wiki pages belonging to unpermitted projects through an improperly authenticated request. This issue has been patched in versions 17.0.5 and 17.1.2.
Access control vulnerability in Evoh NFT EvohClaimable contract with sha256 hash code fa2084d5abca91a62ed1d2f1cad3ec318e6a9a2d7f1510a00d898737b05f48ae allows remote attackers to execute fraudulent NFT transfers.
Dell Wyse Management Suite 3.6.1 and below contains an Improper Access control vulnerability in UI. An attacker with no access to Alert Classification page could potentially exploit this vulnerability, leading to the change the alert categories.
Lack of IP address checking in GitLab EE affecting all versions from 14.2 prior to 15.2.5, 15.3 prior to 15.3.4, and 15.4 prior to 15.4.1 allows a group member to bypass IP restrictions when using a deploy token
Improper access control vulnerability in DofViewer prior to SMR Jun-2022 Release 1 allows attackers to control floating system alert window.
A broken access control vulnerability in the SubNet_handler_func function of spx_restservice allows an attacker to arbitrarily change the security access rights to KVM and Virtual Media functionalities. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.
Langfuse is an open source large language model engineering platform. In versions 3.146.0 and below, the /api/public/slack/install endpoint initiates Slack OAuth using a projectId provided by the client without authentication or authorization. The projectId is preserved throughout the OAuth flow, and the callback stores installations based on this untrusted metadata. This allows an attacker to bind their Slack workspace to any project and potentially receive changes to prompts stored in Langfuse Prompt Management. An attacker can replace existing Prompt Slack Automation integrations or pre-register a malicious one, though the latter requires an authenticated user to unknowingly configure it despite visible workspace and channel indicators in the UI. This issue has been fixed in version 3.147.0.
A broken access control vulnerability in the First_network_func function of spx_restservice allows an attacker to arbitrarily change the network configuration of the BMC. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.
The User Registration & Membership – Custom Registration Form, Login Form, and User Profile plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.1.2 via the 'register_member' function, due to missing validation on the 'member_id' user controlled key. This makes it possible for unauthenticated attackers to delete arbitrary user accounts that newly registered on the site who has the 'urm_user_just_created' user meta set.
Improper access control vulnerability in SmartThings prior to version 1.7.67.25 allows untrusted applications to cause local file inclusion in webview.
Improper access control vulnerability in Smart Touch Call prior to version 1.0.0.5 allows arbitrary webpage loading in webview.
Improper access control vulnerability in SmartThings prior to version 1.7.67.25 allows untrusted applications to cause arbitrary webpage loading in webview.
The Thrive Optimize WordPress plugin before 1.4.13.3, Thrive Comments WordPress plugin before 1.4.15.3, Thrive Headline Optimizer WordPress plugin before 1.3.7.3, Thrive Leads WordPress plugin before 2.3.9.4, Thrive Ultimatum WordPress plugin before 2.3.9.4, Thrive Quiz Builder WordPress plugin before 2.3.9.4, Thrive Apprentice WordPress plugin before 2.3.9.4, Thrive Visual Editor WordPress plugin before 2.6.7.4, Thrive Dashboard WordPress plugin before 2.3.9.3, Thrive Ovation WordPress plugin before 2.4.5, Thrive Clever Widgets WordPress plugin before 1.57.1 and Rise by Thrive Themes WordPress theme before 2.0.0, Ignition by Thrive Themes WordPress theme before 2.0.0, Luxe by Thrive Themes WordPress theme before 2.0.0, FocusBlog by Thrive Themes WordPress theme before 2.0.0, Minus by Thrive Themes WordPress theme before 2.0.0, Squared by Thrive Themes WordPress theme before 2.0.0, Voice WordPress theme before 2.0.0, Performag by Thrive Themes WordPress theme before 2.0.0, Pressive by Thrive Themes WordPress theme before 2.0.0, Storied by Thrive Themes WordPress theme before 2.0.0, Thrive Themes Builder WordPress theme before 2.2.4 register a REST API endpoint associated with Zapier functionality. While this endpoint was intended to require an API key in order to access, it was possible to access it by supplying an empty api_key parameter in vulnerable versions if Zapier was not enabled. Attackers could use this endpoint to add arbitrary data to a predefined option in the wp_options table.
NAVER Whale browser mobile app before 1.10.6.2 allows the attacker to bypass its browser unlock function via incognito mode.