Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the vDaemon process of Cisco SD-WAN Software could allow an unauthenticated, remote attacker to cause a device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient handling of malformed packets. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the web-based interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to view system information that under normal circumstances should be prohibited. The vulnerability is due to incomplete input and validation checking mechanisms in the web-based interface URL request. An attacker could exploit this vulnerability by requesting specific URLs via the web-based interface. A successful exploit could allow the attacker to view sensitive system information.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in the Excel XLM macro parsing module in Clam AntiVirus (ClamAV) Software versions 0.103.0 and 0.103.1 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper error handling that may result in an infinite loop. An attacker could exploit this vulnerability by sending a crafted Excel file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process hang, resulting in a denial of service condition.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client Software could allow an authenticated, local attacker to overwrite VPN profiles on an affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to modify VPN profile files. To exploit this vulnerability, the attacker must have valid credentials on the affected system.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application of an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

Multiple vulnerabilities in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to cause the web UI software to become unresponsive and consume vty line instances, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient error handling in the web UI. An attacker could exploit these vulnerabilities by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause the web UI software to become unresponsive and consume all available vty lines, preventing new session establishment and resulting in a DoS condition. Manual intervention would be required to regain web UI and vty session functionality. Note: These vulnerabilities do not affect the console connection.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the XSI-Actions interface of Cisco BroadWorks Application Server could allow an authenticated, remote attacker to access sensitive information on an affected system. This vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the XSI-Actions interface. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to join a Call Center instance and have calls that they do not have permissions to access distributed to them from the Call Center queue. At the time of publication, Cisco had not released updates that address this vulnerability for Cisco BroadWorks Application Server. However, firmware patches are available.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web interface of Cisco Data Center Network Manager could allow an authenticated application administrator to execute commands on the underlying operating system with root-level privileges. The vulnerability is due to incomplete input validation of user input within an HTTP request. An attacker could exploit this vulnerability by authenticating to the application and then sending a crafted HTTP request to the targeted application. A successful exploit could allow the authenticated attacker to issue commands on the underlying operating system as the root user.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization checking and gain access to sensitive information on an affected system. This vulnerability is due to insufficient authorization checks. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to bypass authorization checking and gain access to sensitive information on the affected system.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. To exploit this vulnerability, the attacker would need to have valid credentials on the device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending one or more crafted IPC messages to the AnyConnect process on an affected device. A successful exploit could allow the attacker to stop the AnyConnect process, causing a DoS condition on the device. Note: The process under attack will automatically restart so no action is needed by the user or admin.

A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper input validation on fields within CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending malicious CAPWAP Discovery Request packets to the Cisco WLC Software. A successful exploit could allow the attacker to cause the Cisco WLC Software to disconnect associated access points (APs). While the APs disconnect and reconnect, service will be unavailable for a brief period of time, resulting in a DoS condition.

A vulnerability in the web-based management interface of Cisco Small Business RV160 and RV260 Series VPN Routers could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on the affected device. To exploit this vulnerability, the attacker must have valid Administrator-level credentials on the affected device.

Multiple vulnerabilities in Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated attacker with Administrator-level read-only credentials to elevate their privileges to Administrator with read-write credentials on an affected system. Note: "Cisco Expressway Series" refers to Cisco Expressway Control (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the change password functionality of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with Read-only credentials to elevate privileges to Administrator on an affected system. This vulnerability is due to incorrect handling of password change requests. An attacker could exploit this vulnerability by authenticating to the application as a Read-only user and sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to alter the passwords of any user on the system, including an administrative user, and then impersonate that user. Note: Cisco Expressway Series refers to the Expressway Control (Expressway-C) device and the Expressway Edge (Expressway-E) device.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary Cisco IOS XE Software CLI commands with level 15 privileges. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a Lobby Ambassador account. This account is not configured by default.

A vulnerability in the SM-1T3/E3 firmware on Cisco Second Generation Integrated Services Routers (ISR G2) and the Cisco 4451-X Integrated Services Router (ISR4451-X) could allow an unauthenticated, remote attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of user input. An attacker could exploit this vulnerability by first connecting to the SM-1T3/E3 module console and entering a string sequence. A successful exploit could allow the attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a DoS condition on an affected device.

A vulnerability in the IPsec driver code of multiple Cisco IOS XE Software platforms and the Cisco ASA 5500-X Series Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to improper processing of malformed IPsec Authentication Header (AH) or Encapsulating Security Payload (ESP) packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to be processed by an affected device. An exploit could allow the attacker to cause a reload of the affected device.

A vulnerability in the Cisco Umbrella Enterprise Roaming Client (ERC) could allow an authenticated, local attacker to elevate privileges to Administrator. To exploit the vulnerability, the attacker must authenticate with valid local user credentials. This vulnerability is due to improper implementation of file system permissions, which could allow non-administrative users to place files within restricted directories. An attacker could exploit this vulnerability by placing an executable file within the restricted directory, which when executed by the ERC client, would run with Administrator privileges.

A vulnerability in the user management functionality of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to perform a denial of service (DoS) attack against an affected system. The vulnerability is due to insufficient validation of user-provided input. An attacker could exploit this vulnerability by logging in with a highly privileged user account and performing a sequence of specific user management operations that interfere with the underlying operating system. A successful exploit could allow the attacker to permanently degrade the functionality of the affected system.

A vulnerability in the Secure Sockets Layer (SSL) VPN feature for Cisco Small Business RV VPN Routers could allow an unauthenticated, remote attacker to cause the device to unexpectedly restart, causing a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to the targeted device. A successful exploit could allow the attacker to cause a reload, resulting in a DoS condition.

A vulnerability in certain web pages of Cisco Webex Meetings and Cisco Webex Meetings Server could allow an unauthenticated, remote attacker to modify a web page in the context of a browser. The vulnerability is due to improper checks on parameter values within affected pages. An attacker could exploit this vulnerability by persuading a user to follow a crafted link that is designed to pass HTML code into an affected parameter. A successful exploit could allow the attacker to alter the contents of a web page to redirect the user to potentially malicious web sites, or the attacker could leverage this vulnerability to conduct further client-side attacks.

A vulnerability in the Flexible NetFlow Version 9 packet processor of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers and Cisco AireOS Software for Cisco Wireless LAN Controllers (WLC) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of certain parameters in a Flexible NetFlow Version 9 record. An attacker could exploit this vulnerability by spoofing the address of an existing Access Point on the network and sending a Control and Provisioning of Wireless Access Points (CAPWAP) packet that includes a crafted Flexible NetFlow Version 9 record to an affected device. A successful exploit could allow the attacker to cause a process crash that would lead to a reload of the device.

A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials on an affected device.

A vulnerability in the antispam protection mechanisms of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass the URL reputation filters on an affected device. The vulnerability is due to insufficient input validation of URLs. An attacker could exploit this vulnerability by crafting a URL in a particular way. A successful exploit could allow the attacker to bypass the URL reputation filters that are configured for the affected device, which could allow malicious URLs to pass through the device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

Multiple vulnerabilities in the user interface of Cisco Webex Meetings Desktop App could allow an authenticated, remote attacker to obtain restricted information from other Webex users. These vulnerabilities are due to improper input validation of parameters returned to the application from a web site. An attacker with a valid Webex account could exploit these vulnerabilities by persuading a user to follow a URL that is designed to return malicious path parameters to the affected software. A successful exploit could allow the attacker to obtain restricted information from other Webex users.

A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.

A vulnerability in the implementation of the Low Power, Wide Area (LPWA) subsystem of Cisco IOS Software for Cisco 800 Series Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data or cause a denial of service (DoS) condition. The vulnerability is due to a lack of input and validation checking mechanisms for virtual-LPWA (VLPWA) protocol modem messages. An attacker could exploit this vulnerability by supplying crafted packets to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data or cause the VLPWA interface of the affected device to shut down, resulting in DoS condition.

A vulnerability in the IPv6 packet processing engine of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of incoming IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet through an affected device. A successful exploit could allow the attacker to cause an unexpected reboot of the switch, leading to a DoS condition. This vulnerability is specific to IPv6 traffic. IPv4 traffic is not affected.