In the Linux kernel, the following vulnerability has been resolved: mm/damon/stat: deallocate damon_call() failure leaking damon_ctx damon_stat_start() always allocates the module's damon_ctx object (damon_stat_context). Meanwhile, if damon_call() in the function fails, the damon_ctx object is not deallocated. Hence, if the damon_call() is failed, and the user writes Y to “enabled” again, the previously allocated damon_ctx object is leaked. This cannot simply be fixed by deallocating the damon_ctx object when damon_call() fails. That's because damon_call() failure doesn't guarantee the kdamond main function, which accesses the damon_ctx object, is completely finished. In other words, if damon_stat_start() deallocates the damon_ctx object after damon_call() failure, the not-yet-terminated kdamond could access the freed memory (use-after-free). Fix the leak while avoiding the use-after-free by keeping returning damon_stat_start() without deallocating the damon_ctx object after damon_call() failure, but deallocating it when the function is invoked again and the kdamond is completely terminated. If the kdamond is not yet terminated, simply return -EAGAIN, as the kdamond will soon be terminated. The issue was discovered [1] by sashiko.

In the Linux kernel, the following vulnerability has been resolved: fuse: reject oversized dirents in page cache fuse_add_dirent_to_cache() computes a serialized dirent size from the server-controlled namelen field and copies the dirent into a single page-cache page. The existing logic only checks whether the dirent fits in the remaining space of the current page and advances to a fresh page if not. It never checks whether the dirent itself exceeds PAGE_SIZE. As a result, a malicious FUSE server can return a dirent with namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB page systems this causes memcpy() to overflow the cache page by 24 bytes into the following kernel page. Reject dirents that cannot fit in a single page before copying them into the readdir cache.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down When the nl80211 socket that originated a PMSR request is closed, cfg80211_release_pmsr() sets the request's nl_portid to zero and schedules pmsr_free_wk to process the abort asynchronously. If the interface is concurrently torn down before that work runs, cfg80211_pmsr_wdev_down() calls cfg80211_pmsr_process_abort() directly. However, the already- scheduled pmsr_free_wk work item remains pending and may run after the interface has been removed from the driver. This could cause the driver's abort_pmsr callback to operate on a torn-down interface, leading to undefined behavior and potential crashes. Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down() before calling cfg80211_pmsr_process_abort(). This ensures any pending or in-progress work is drained before interface teardown proceeds, preventing the work from invoking the driver abort callback after the interface is gone.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_notify_common() The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a 7-bit field (0-127) that is used to index into the connector array in ucsi_connector_change(). However, the array is only allocated for the number of connectors reported by the device (typically 2-4 entries). A malicious or malfunctioning device could report an out-of-range connector number in the CCI, causing an out-of-bounds array access in ucsi_connector_change(). Add a bounds check in ucsi_notify_common(), the central point where CCI is parsed after arriving from hardware, so that bogus connector numbers are rejected before they propagate further.

In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: fix double free via VMA splitting privcmd_vm_ops defines .close (privcmd_close), but neither .may_split nor .open. When userspace does a partial munmap() on a privcmd mapping, the kernel splits the VMA via __split_vma(). Since may_split is NULL, the split is allowed. vm_area_dup() copies vm_private_data (a pages array allocated in alloc_empty_pages()) into the new VMA without any fixup, because there is no .open callback. Both VMAs now point to the same pages array. When the unmapped portion is closed, privcmd_close() calls: - xen_unmap_domain_gfn_range() - xen_free_unpopulated_pages() - kvfree(pages) The surviving VMA still holds the dangling pointer. When it is later destroyed, the same sequence runs again, which leads to a double free. Fix this issue by adding a .may_split callback denying the VMA split. This is XSA-487 / CVE-2026-31787

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix missing SPDIFI1 index handling SPDIF1 DAIO type isn't properly handled in daio_device_index() for hw20k2, and it returned -EINVAL, which ended up with the out-of-bounds array access. Follow the hw20k1 pattern and return the proper index for this type, too.

In the Linux kernel, the following vulnerability has been resolved: af_unix: read UNIX_DIAG_VFS data under unix_state_lock Exact UNIX diag lookups hold a reference to the socket, but not to u->path. Meanwhile, unix_release_sock() clears u->path under unix_state_lock() and drops the path reference after unlocking. Read the inode and device numbers for UNIX_DIAG_VFS while holding unix_state_lock(), then emit the netlink attribute after dropping the lock. This keeps the VFS data stable while the reply is being built.

In the Linux kernel, the following vulnerability has been resolved: openvswitch: defer tunnel netdev_put to RCU release ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already detached the device. Dropping the netdev reference in destroy can race with concurrent readers that still observe vport->dev. Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let vport_netdev_free() drop the reference from the RCU callback, matching the non-tunnel destroy path and avoiding additional synchronization under RTNL.

In the Linux kernel, the following vulnerability has been resolved: driver core: enforce device_lock for driver_match_device() Currently, driver_match_device() is called from three sites. One site (__device_attach_driver) holds device_lock(dev), but the other two (bind_store and __driver_attach) do not. This inconsistency means that bus match() callbacks are not guaranteed to be called with the lock held. Fix this by introducing driver_match_device_locked(), which guarantees holding the device lock using a scoped guard. Replace the unlocked calls in bind_store() and __driver_attach() with this new helper. Also add a lock assertion to driver_match_device() to enforce this guarantee. This consistency also fixes a known race condition. The driver_override implementation relies on the device_lock, so the missing lock led to the use-after-free (UAF) reported in Bugzilla for buses using this field. Stress testing the two newly locked paths for 24 hours with CONFIG_PROVE_LOCKING and CONFIG_LOCKDEP enabled showed no UAF recurrence and no lockdep warnings.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY, as documented in mm/filemap.c: "If our return value has VM_FAULT_RETRY set, it's because the mmap_lock may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()." When this happens, a concurrent munmap() can call remove_vma() and free the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call dereferences it -- a use-after-free. Fix this by saving ip_blkno as a plain integer before calling filemap_fault(), and removing vma from the trace event. Since ip_blkno is copied by value before the lock can be dropped, it remains valid regardless of what happens to the vma or inode afterward.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: possible double-free of cctx->remote_heap fastrpc_init_create_static_process() may free cctx->remote_heap on the err_map path but does not clear the pointer. Later, fastrpc_rpmsg_remove() frees cctx->remote_heap again if it is non-NULL, which can lead to a double-free if the INIT_CREATE_STATIC ioctl hits the error path and the rpmsg device is subsequently removed/unbound. Clear cctx->remote_heap after freeing it in the error path to prevent the later cleanup from freeing it again. This issue was found by an in-house analysis workflow that extracts AST-based information and runs static checks, with LLM assistance for triage, and was confirmed by manual code review. No hardware testing was performed.

In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix to not free memory after the device is registered in hackrf_probe() In hackrf driver, the following race condition occurs: ``` CPU0 CPU1 hackrf_probe() kzalloc(); // alloc hackrf_dev .... v4l2_device_register(); .... fd = sys_open("/path/to/dev"); // open hackrf fd .... v4l2_device_unregister(); .... kfree(); // free hackrf_dev .... sys_ioctl(fd, ...); v4l2_ioctl(); video_is_registered() // UAF!! .... sys_close(fd); v4l2_release() // UAF!! hackrf_video_release() kfree(); // DFB!! ``` When a V4L2 or video device is unregistered, the device node is removed so new open() calls are blocked. However, file descriptors that are already open-and any in-flight I/O-do not terminate immediately; they remain valid until the last reference is dropped and the driver's release() is invoked. Therefore, freeing device memory on the error path after hackrf_probe() has registered dev it will lead to a race to use-after-free vuln, since those already-open handles haven't been released yet. And since release() free memory too, race to use-after-free and double-free vuln occur. To prevent this, if device is registered from probe(), it should be modified to free memory only through release() rather than calling kfree() directly.

In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix use after free of parent_port in cxl_detach_ep() cxl_detach_ep() is called during bottom-up removal when all CXL memory devices beneath a switch port have been removed. For each port in the hierarchy it locks both the port and its parent, removes the endpoint, and if the port is now empty, marks it dead and unregisters the port by calling delete_switch_port(). There are two places during this work where the parent_port may be used after freeing: First, a concurrent detach may have already processed a port by the time a second worker finds it via bus_find_device(). Without pinning parent_port, it may already be freed when we discover port->dead and attempt to unlock the parent_port. In a production kernel that's a silent memory corruption, with lock debug, it looks like this: []DEBUG_LOCKS_WARN_ON(__owner_task(owner) != get_current()) []WARNING: kernel/locking/mutex.c:949 at __mutex_unlock_slowpath+0x1ee/0x310 []Call Trace: []mutex_unlock+0xd/0x20 []cxl_detach_ep+0x180/0x400 [cxl_core] []devm_action_release+0x10/0x20 []devres_release_all+0xa8/0xe0 []device_unbind_cleanup+0xd/0xa0 []really_probe+0x1a6/0x3e0 Second, delete_switch_port() releases three devm actions registered against parent_port. The last of those is unregister_port() and it calls device_unregister() on the child port, which can cascade. If parent_port is now also empty the device core may unregister and free it too. So by the time delete_switch_port() returns, parent_port may be free, and the subsequent device_unlock(&parent_port->dev) operates on freed memory. The kernel log looks same as above, with a different offset in cxl_detach_ep(). Both of these issues stem from the absence of a lifetime guarantee between a child port and its parent port. Establish a lifetime rule for ports: child ports hold a reference to their parent device until release. Take the reference when the port is allocated and drop it when released. This ensures the parent is valid for the full lifetime of the child and eliminates the use after free window in cxl_detach_ep(). This is easily reproduced with a reload of cxl_acpi in QEMU with CXL devices present.

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free in em28xx_v4l2_open() em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock, creating a race with em28xx_v4l2_init()'s error path and em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct and set dev->v4l2 to NULL under dev->lock. This race leads to two issues: - use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler, since the video_device is embedded in the freed em28xx_v4l2 struct. - NULL pointer dereference in em28xx_resolution_set() when accessing v4l2->norm, since dev->v4l2 has been set to NULL. Fix this by moving the mutex_lock() before the dev->v4l2 read and adding a NULL check for dev->v4l2 under the lock.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET and Intel exception-info retrieval) without holding hci_req_sync_lock(). This lets it race against hci_dev_do_close() -> btintel_shutdown_combined(), which also runs __hci_cmd_sync() under the same lock. When both paths manipulate hdev->req_status/req_rsp concurrently, the close path may free the response skb first, and the still-running hw_error path hits a slab-use-after-free in kfree_skb(). Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it is serialized with every other synchronous HCI command issuer. Below is the data race report and the kasan report: BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined read of hdev->req_rsp at net/bluetooth/hci_sync.c:199 by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254 hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030 write/free by task ioctl/22580: btintel_shutdown_combined+0xd0/0x360 drivers/bluetooth/btintel.c:3648 hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246 hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526 BUG: KASAN: slab-use-after-free in sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202 Read of size 4 at addr ffff888144a738dc by task kworker/u17:1/83: __hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200 __hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223 btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260

In the Linux kernel, the following vulnerability has been resolved: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats() iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the value could change in runtime, we should use num_tx_queues instead. Moreover iavf_get_ethtool_stats() uses num_active_queues while iavf_get_sset_count() and iavf_get_stat_strings() use real_num_tx_queues, which triggers out-of-bounds writes when we do "ethtool -L" and "ethtool -S" simultaneously [1]. For example when we change channels from 1 to 8, Thread 3 could be scheduled before Thread 2, and out-of-bounds writes could be triggered in Thread 3: Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S) iavf_set_channels() ... iavf_alloc_queues() -> num_active_queues = 8 iavf_schedule_finish_config() iavf_get_sset_count() real_num_tx_queues: 1 -> buffer for 1 queue iavf_get_ethtool_stats() num_active_queues: 8 -> out-of-bounds! iavf_finish_config() -> real_num_tx_queues = 8 Use immutable num_tx_queues in all related functions to avoid the issue. [1] BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270 Write of size 8 at addr ffffc900031c9080 by task ethtool/5800 CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x180 iavf_add_one_ethtool_stat+0x200/0x270 iavf_get_ethtool_stats+0x14c/0x2e0 __dev_ethtool+0x3d0c/0x5830 dev_ethtool+0x12d/0x270 dev_ioctl+0x53c/0xe30 sock_do_ioctl+0x1a9/0x270 sock_ioctl+0x3d4/0x5e0 __x64_sys_ioctl+0x137/0x1c0 do_syscall_64+0xf3/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7da0e6e36d ... </TASK> The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813a013de0 pfn:0x13a013 flags: 0x200000000000000(node=0|zone=2) raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: only publish mode_data after clone setup iptfs_clone_state() stores x->mode_data before allocating the reorder window. If that allocation fails, the code frees the cloned state and returns -ENOMEM, leaving x->mode_data pointing at freed memory. The xfrm clone unwind later runs destroy_state() through x->mode_data, so the failed clone path tears down IPTFS state that clone_state() already freed. Keep the cloned IPTFS state private until all allocations succeed so failed clones leave x->mode_data unset. The destroy path already handles a NULL mode_data pointer.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output syzkaller reportes a KASAN issue with stack-out-of-bounds. The call trace is as follows: dump_stack+0x9c/0xd3 print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 __perf_event_header__init_id+0x34/0x290 perf_event_header__init_id+0x48/0x60 perf_output_begin+0x4a4/0x560 perf_event_bpf_output+0x161/0x1e0 perf_iterate_sb_cpu+0x29e/0x340 perf_iterate_sb+0x4c/0xc0 perf_event_bpf_event+0x194/0x2c0 __bpf_prog_put.constprop.0+0x55/0xf0 __cls_bpf_delete_prog+0xea/0x120 [cls_bpf] cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf] process_one_work+0x3c2/0x730 worker_thread+0x93/0x650 kthread+0x1b8/0x210 ret_from_fork+0x1f/0x30 commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()") use on-stack struct perf_sample_data of the caller function. However, perf_event_bpf_output uses incorrect parameter to convert small-sized data (struct perf_bpf_event) into large-sized data (struct perf_sample_data), which causes memory overwriting occurs in __perf_event_header__init_id.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create We can't simply free the connector after calling drm_connector_init on it. We need to clean up the drm side first. It might not fix all regressions from commit 2b5d1c29f6c4 ("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"), but at least it fixes a memory corruption in error handling related to that commit.

In the Linux kernel, the following vulnerability has been resolved: ASoC: lpass: Fix for KASAN use_after_free out of bounds When we run syzkaller we get below Out of Bounds error. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110 Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144 CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT) Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c print_address_description+0x30/0x2d8 kasan_report+0x178/0x1e4 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf8/0x5a0 _regmap_read+0x45c/0x86c _regmap_update_bits+0x128/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_put_dec_enum+0x1d0/0x268 snd_ctl_elem_write+0x288/0x474 By Error checking and checking valid values issue gets rectifies.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Properly order ib_device_unalloc() to avoid UAF ib_dealloc_device() should be called only after device cleanup. Fix the dealloc sequence.

In the Linux kernel, the following vulnerability has been resolved: blk-crypto: make blk_crypto_evict_key() more robust If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_key regardless of the return value of blk_crypto_evict_key(). These two assumptions don't match, and the result is that there can be a use-after-free in blk_crypto_reprogram_all_keys() after one of these errors occurs. (Note, these errors *shouldn't* happen; we're just talking about what happens if they do anyway.) Fix this by making blk_crypto_evict_key() unlink the key from the keyslot management structures even on failure. Also improve some comments.

In the Linux kernel, the following vulnerability has been resolved: arm64/sme: Set new vector length before reallocating As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: tighten bounds checking in decode_message() Copy the bounds checking from encode_message() to decode_message(). This patch addresses the following concerns. Ensure that there is enough space for at least one header so that we don't have a negative size later. if (msg_hdr_len < sizeof(*trans_hdr)) Ensure that we have enough space to read the next header from the msg->data. if (msg_len > msg_hdr_len - sizeof(*trans_hdr)) return -EINVAL; Check that the trans_hdr->len is not below the minimum size: if (hdr_len < sizeof(*trans_hdr)) This minimum check ensures that we don't corrupt memory in decode_passthrough() when we do. memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr)); And finally, use size_add() to prevent an integer overflow: if (size_add(msg_len, hdr_len) > msg_hdr_len)

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix xsk_diag use-after-free error during socket cleanup Fix a use-after-free error that is possible if the xsk_diag interface is used after the socket has been unbound from the device. This can happen either due to the socket being closed or the device disappearing. In the early days of AF_XDP, the way we tested that a socket was not bound to a device was to simply check if the netdevice pointer in the xsk socket structure was NULL. Later, a better system was introduced by having an explicit state variable in the xsk socket struct. For example, the state of a socket that is on the way to being closed and has been unbound from the device is XSK_UNBOUND. The commit in the Fixes tag below deleted the old way of signalling that a socket is unbound, setting dev to NULL. This in the belief that all code using the old way had been exterminated. That was unfortunately not true as the xsk diagnostics code was still using the old way and thus does not work as intended when a socket is going down. Fix this by introducing a test against the state variable. If the socket is in the state XSK_UNBOUND, simply abort the diagnostic's netlink operation.

In the Linux kernel, the following vulnerability has been resolved: ext2: Check block size validity during mount Check that log of block size stored in the superblock has sensible value. Otherwise the shift computing the block size can overflow leading to undefined behavior.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Unregister devlink params in case interface is down Currently, in case an interface is down, mlx5 driver doesn't unregister its devlink params, which leads to this WARN[1]. Fix it by unregistering devlink params in that case as well. [1] [ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc [ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61 [ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023 [ 295.543096 ] pc : devlink_free+0x174/0x1fc [ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.561816 ] sp : ffff80000809b850 [ 295.711155 ] Call trace: [ 295.716030 ] devlink_free+0x174/0x1fc [ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core] [ 295.743534 ] auxiliary_bus_remove+0x2c/0x50 [ 295.751893 ] __device_release_driver+0x19c/0x280 [ 295.761120 ] device_release_driver+0x34/0x50 [ 295.769649 ] bus_remove_device+0xdc/0x170 [ 295.777656 ] device_del+0x17c/0x3a4 [ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core] [ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core] [ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core] [ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core] [ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core] [ 295.833439 ] pci_device_shutdown+0x3c/0xa0 [ 295.841651 ] device_shutdown+0x170/0x340 [ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0 [ 295.857322 ] __arm64_sys_reboot+0x2c/0x40 [ 295.865329 ] invoke_syscall+0x78/0x100 [ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184 [ 295.882392 ] do_el0_svc+0x30/0xac [ 295.889008 ] el0_svc+0x48/0x160 [ 295.895278 ] el0t_64_sync_handler+0xa4/0x130 [ 295.903807 ] el0t_64_sync+0x1a4/0x1a8 [ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]---

In the Linux kernel, the following vulnerability has been resolved: vdpa: Add features attr to vdpa_nl_policy for nlattr length check The vdpa_nl_policy structure is used to validate the nlattr when parsing the incoming nlmsg. It will ensure the attribute being described produces a valid nlattr pointer in info->attrs before entering into each handler in vdpa_nl_ops. That is to say, the missing part in vdpa_nl_policy may lead to illegal nlattr after parsing, which could lead to OOB read just like CVE-2023-3773. This patch adds the missing nla_policy for vdpa features attr to avoid such bugs.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix invalid address access in lookup_rec() when index is 0 KASAN reported follow problem: BUG: KASAN: use-after-free in lookup_rec Read of size 8 at addr ffff000199270ff0 by task modprobe CPU: 2 Comm: modprobe Call trace: kasan_report __asan_load8 lookup_rec ftrace_location arch_check_ftrace_location check_kprobe_address_safe register_kprobe When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a pg which is newly added to ftrace_pages_start in ftrace_process_locs(). Before the first pg->index++, index is 0 and accessing pg->records[-1].ip will cause this problem. Don't check the ip when pg->index is 0.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf An integer overflow occurs in the iwl_write_to_user_buf() function, which is called by the iwl_dbgfs_monitor_data_read() function. static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count, void *buf, ssize_t *size, ssize_t *bytes_copied) { int buf_size_left = count - *bytes_copied; buf_size_left = buf_size_left - (buf_size_left % sizeof(u32)); if (*size > buf_size_left) *size = buf_size_left; If the user passes a SIZE_MAX value to the "ssize_t count" parameter, the ssize_t count parameter is assigned to "int buf_size_left". Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a negative number, so "*size" is assigned "buf_size_left" and goes into the third argument of the copy_to_user function, causing a heap overflow. This is not a security vulnerability because iwl_dbgfs_monitor_data_read() is a debugfs operation with 0400 privileges.

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix nexthop hash size The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mptcp: use the workqueue to destroy unaccepted sockets Christoph reported a UaF at token lookup time after having refactored the passive socket initialization part: BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260 Read of size 4 at addr ffff88810698d5b0 by task syz-executor653/3198 CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 __token_bucket_busy+0x253/0x260 mptcp_token_new_connect+0x13d/0x490 mptcp_connect+0x4ed/0x860 __inet_stream_connect+0x80e/0xd90 tcp_sendmsg_fastopen+0x3ce/0x710 mptcp_sendmsg+0xff1/0x1a20 inet_sendmsg+0x11d/0x140 __sys_sendto+0x405/0x490 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc We need to properly clean-up all the paired MPTCP-level resources and be sure to release the msk last, even when the unaccepted subflow is destroyed by the TCP internals via inet_child_forget(). We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra, explicitly checking that for the critical scenario: the closed subflow is the MPC one, the msk is not accepted and eventually going through full cleanup. With such change, __mptcp_destroy_sock() is always called on msk sockets, even on accepted ones. We don't need anymore to transiently drop one sk reference at msk clone time. Please note this commit depends on the parent one: mptcp: refactor passive socket initialization

In the Linux kernel, the following vulnerability has been resolved: macvlan: fix error recovery in macvlan_common_newlink() valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: <quote valis> The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, &params, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). </quote valis> With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix use-after-free in nf_tables_addchain() nf_tables_addchain() publishes the chain to table->chains via list_add_tail_rcu() (in nft_chain_add()) before registering hooks. If nf_tables_register_hook() then fails, the error path calls nft_chain_del() (list_del_rcu()) followed by nf_tables_chain_destroy() with no RCU grace period in between. This creates two use-after-free conditions: 1) Control-plane: nf_tables_dump_chains() traverses table->chains under rcu_read_lock(). A concurrent dump can still be walking the chain when the error path frees it. 2) Packet path: for NFPROTO_INET, nf_register_net_hook() briefly installs the IPv4 hook before IPv6 registration fails. Packets entering nft_do_chain() via the transient IPv4 hook can still be dereferencing chain->blob_gen_X when the error path frees the chain. Add synchronize_rcu() between nft_chain_del() and the chain destroy so that all RCU readers -- both dump threads and in-flight packet evaluation -- have finished before the chain is freed.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate() nft_map_catchall_activate() has an inverted element activity check compared to its non-catchall counterpart nft_mapelem_activate() and compared to what is logically required. nft_map_catchall_activate() is called from the abort path to re-activate catchall map elements that were deactivated during a failed transaction. It should skip elements that are already active (they don't need re-activation) and process elements that are inactive (they need to be restored). Instead, the current code does the opposite: it skips inactive elements and processes active ones. Compare the non-catchall activate callback, which is correct: nft_mapelem_activate(): if (nft_set_elem_active(ext, iter->genmask)) return 0; /* skip active, process inactive */ With the buggy catchall version: nft_map_catchall_activate(): if (!nft_set_elem_active(ext, genmask)) continue; /* skip inactive, process active */ The consequence is that when a DELSET operation is aborted, nft_setelem_data_activate() is never called for the catchall element. For NFT_GOTO verdict elements, this means nft_data_hold() is never called to restore the chain->use reference count. Each abort cycle permanently decrements chain->use. Once chain->use reaches zero, DELCHAIN succeeds and frees the chain while catchall verdict elements still reference it, resulting in a use-after-free. This is exploitable for local privilege escalation from an unprivileged user via user namespaces + nftables on distributions that enable CONFIG_USER_NS and CONFIG_NF_TABLES. Fix by removing the negation so the check matches nft_mapelem_activate(): skip active elements, process inactive ones.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in durable v2 replay of active file handles parse_durable_handle_context() unconditionally assigns dh_info->fp->conn to the current connection when handling a DURABLE_REQ_V2 context with SMB2_FLAGS_REPLAY_OPERATION. ksmbd_lookup_fd_cguid() does not filter by fp->conn, so it returns file handles that are already actively connected. The unconditional overwrite replaces fp->conn, and when the overwriting connection is subsequently freed, __ksmbd_close_fd() dereferences the stale fp->conn via spin_lock(&fp->conn->llist_lock), causing a use-after-free. KASAN report: [ 7.349357] ================================================================== [ 7.349607] BUG: KASAN: slab-use-after-free in _raw_spin_lock+0x75/0xe0 [ 7.349811] Write of size 4 at addr ffff8881056ac18c by task kworker/1:2/108 [ 7.350010] [ 7.350064] CPU: 1 UID: 0 PID: 108 Comm: kworker/1:2 Not tainted 7.0.0-rc3+ #58 PREEMPTLAZY [ 7.350068] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 7.350070] Workqueue: ksmbd-io handle_ksmbd_work [ 7.350083] Call Trace: [ 7.350087] <TASK> [ 7.350087] dump_stack_lvl+0x64/0x80 [ 7.350094] print_report+0xce/0x660 [ 7.350100] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 7.350101] ? __pfx___mod_timer+0x10/0x10 [ 7.350106] ? _raw_spin_lock+0x75/0xe0 [ 7.350108] kasan_report+0xce/0x100 [ 7.350109] ? _raw_spin_lock+0x75/0xe0 [ 7.350114] kasan_check_range+0x105/0x1b0 [ 7.350116] _raw_spin_lock+0x75/0xe0 [ 7.350118] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350119] ? __call_rcu_common.constprop.0+0x25e/0x780 [ 7.350125] ? close_id_del_oplock+0x2cc/0x4e0 [ 7.350128] __ksmbd_close_fd+0x27f/0xaf0 [ 7.350131] ksmbd_close_fd+0x135/0x1b0 [ 7.350133] smb2_close+0xb19/0x15b0 [ 7.350142] ? __pfx_smb2_close+0x10/0x10 [ 7.350143] ? xas_load+0x18/0x270 [ 7.350146] ? _raw_spin_lock+0x84/0xe0 [ 7.350148] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350150] ? _raw_spin_unlock+0xe/0x30 [ 7.350151] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 7.350153] ? ksmbd_tree_conn_lookup+0xcd/0xf0 [ 7.350154] handle_ksmbd_work+0x40f/0x1080 [ 7.350156] process_one_work+0x5fa/0xef0 [ 7.350162] ? assign_work+0x122/0x3e0 [ 7.350163] worker_thread+0x54b/0xf70 [ 7.350165] ? __pfx_worker_thread+0x10/0x10 [ 7.350166] kthread+0x346/0x470 [ 7.350170] ? recalc_sigpending+0x19b/0x230 [ 7.350176] ? __pfx_kthread+0x10/0x10 [ 7.350178] ret_from_fork+0x4fb/0x6c0 [ 7.350183] ? __pfx_ret_from_fork+0x10/0x10 [ 7.350185] ? __switch_to+0x36c/0xbe0 [ 7.350188] ? __pfx_kthread+0x10/0x10 [ 7.350190] ret_from_fork_asm+0x1a/0x30 [ 7.350197] </TASK> [ 7.350197] [ 7.355160] Allocated by task 123: [ 7.355261] kasan_save_stack+0x33/0x60 [ 7.355373] kasan_save_track+0x14/0x30 [ 7.355484] __kasan_kmalloc+0x8f/0xa0 [ 7.355593] ksmbd_conn_alloc+0x44/0x6d0 [ 7.355711] ksmbd_kthread_fn+0x243/0xd70 [ 7.355839] kthread+0x346/0x470 [ 7.355942] ret_from_fork+0x4fb/0x6c0 [ 7.356051] ret_from_fork_asm+0x1a/0x30 [ 7.356164] [ 7.356214] Freed by task 134: [ 7.356305] kasan_save_stack+0x33/0x60 [ 7.356416] kasan_save_track+0x14/0x30 [ 7.356527] kasan_save_free_info+0x3b/0x60 [ 7.356646] __kasan_slab_free+0x43/0x70 [ 7.356761] kfree+0x1ca/0x430 [ 7.356862] ksmbd_tcp_disconnect+0x59/0xe0 [ 7.356993] ksmbd_conn_handler_loop+0x77e/0xd40 [ 7.357138] kthread+0x346/0x470 [ 7.357240] ret_from_fork+0x4fb/0x6c0 [ 7.357350] ret_from_fork_asm+0x1a/0x30 [ 7.357463] [ 7.357513] The buggy address belongs to the object at ffff8881056ac000 [ 7.357513] which belongs to the cache kmalloc-1k of size 1024 [ 7.357857] The buggy address is located 396 bytes inside of [ 7.357857] freed 1024-byte region ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count() In iscsit_dec_session_usage_count(), the function calls complete() while holding the sess->session_usage_lock. Similar to the connection usage count logic, the waiter signaled by complete() (e.g., in the session release path) may wake up and free the iscsit_session structure immediately. This creates a race condition where the current thread may attempt to execute spin_unlock_bh() on a session structure that has already been deallocated, resulting in a KASAN slab-use-after-free. To resolve this, release the session_usage_lock before calling complete() to ensure all dereferences of the sess pointer are finished before the waiter is allowed to proceed with deallocation.

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free Exynos Virtual Display driver performs memory alloc/free operations without lock protection, which easily causes concurrency problem. For example, use-after-free can occur in race scenario like this: ``` CPU0 CPU1 CPU2 ---- ---- ---- vidi_connection_ioctl() if (vidi->connection) // true drm_edid = drm_edid_alloc(); // alloc drm_edid ... ctx->raw_edid = drm_edid; ... drm_mode_getconnector() drm_helper_probe_single_connector_modes() vidi_get_modes() if (ctx->raw_edid) // true drm_edid_dup(ctx->raw_edid); if (!drm_edid) // false ... vidi_connection_ioctl() if (vidi->connection) // false drm_edid_free(ctx->raw_edid); // free drm_edid ... drm_edid_alloc(drm_edid->edid) kmemdup(edid); // UAF!! ... ``` To prevent these vulns, at least in vidi_context, member variables related to memory alloc/free should be protected with ctx->lock.

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels IDLETIMER revision 0 rules reuse existing timers by label and always call mod_timer() on timer->timer. If the label was created first by revision 1 with XT_IDLETIMER_ALARM, the object uses alarm timer semantics and timer->timer is never initialized. Reusing that object from revision 0 causes mod_timer() on an uninitialized timer_list, triggering debugobjects warnings and possible panic when panic_on_warn=1. Fix this by rejecting revision 0 rule insertion when an existing timer with the same label is of ALARM type.

In the Linux kernel, the following vulnerability has been resolved: netrom: fix double-free in nr_route_frame() In nr_route_frame(), old_skb is immediately freed without checking if nr_neigh->ax25 pointer is NULL. Therefore, if nr_neigh->ax25 is NULL, the caller function will free old_skb again, causing a double-free bug. Therefore, to prevent this, we need to modify it to check whether nr_neigh->ax25 is NULL before freeing old_skb.

In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure ctx->rings is stable for task work flags manipulation If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while the ring is being resized, it's possible for the OR'ing of IORING_SQ_TASKRUN to happen in the small window of swapping into the new rings and the old rings being freed. Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is protected by RCU. The task work flags manipulation is inside RCU already, and if the resize ring freeing is done post an RCU synchronize, then there's no need to add locking to the fast path of task work additions. Note: this is only done for DEFER_TASKRUN, as that's the only setup mode that supports ring resizing. If this ever changes, then they too need to use the io_ctx_mark_taskrun() helper.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue.

In the Linux kernel, the following vulnerability has been resolved: fou: Don't allow 0 for FOU_ATTR_IPPROTO. fou_udp_recv() has the same problem mentioned in the previous patch. If FOU_ATTR_IPPROTO is set to 0, skb is not freed by fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu(). Let's forbid 0 for FOU_ATTR_IPPROTO.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: add chann_lock to protect ksmbd_chann_list xarray ksmbd_chann_list xarray lacks synchronization, allowing use-after-free in multi-channel sessions (between lookup_chann_list() and ksmbd_chann_del). Adds rw_semaphore chann_lock to struct ksmbd_session and protects all xa_load/xa_store/xa_erase accesses.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid mapping wrong physical block for swapfile Xiaolong Guo reported a f2fs bug in bugzilla [1] [1] https://bugzilla.kernel.org/show_bug.cgi?id=220951 Quoted: "When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+, the system experiences data corruption leading to either: 1 dm-verity corruption errors and device reboot 2 F2FS node corruption errors and boot hangs The issue occurs specifically when: 1 Using F2FS filesystem (ext4 is unaffected) 2 Swapfile size is less than F2FS section size (2MB) 3 Swapfile has fragmented physical layout (multiple non-contiguous extents) 4 Kernel version is 6.6+ (6.1 is unaffected) The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the first extent of a small swapfile (< 2MB) is not aligned to section boundaries, the function incorrectly treats it as the last extent, failing to map subsequent extents. This results in incorrect swap_extent creation where only the first extent is mapped, causing subsequent swap writes to overwrite wrong physical locations (other files' data). Steps to Reproduce 1 Setup a device with F2FS-formatted userdata partition 2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng 3 Run swap stress test: (Android devices) adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60 --swap 0" Log: 1 Ftrace shows in kernel 6.6, only first extent is mapped during second f2fs_map_blocks call in check_swap_activate(): stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start blkaddr=0x43143, len=0x1 (Only 4KB mapped, not the full swapfile) 2 in kernel 6.1, both extents are correctly mapped: stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start blkaddr=0x13cd4, len=0x1 stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start blkaddr=0x60c84b, len=0xff The problematic code is in check_swap_activate(): if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec || nr_pblocks % blks_per_sec || !f2fs_valid_pinned_area(sbi, pblock)) { bool last_extent = false; not_aligned++; nr_pblocks = roundup(nr_pblocks, blks_per_sec); if (cur_lblock + nr_pblocks > sis->max) nr_pblocks -= blks_per_sec; /* this extent is last one */ if (!nr_pblocks) { nr_pblocks = last_lblock - cur_lblock; last_extent = true; } ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks); if (ret) { if (ret == -ENOENT) ret = -EINVAL; goto out; } if (!last_extent) goto retry; } When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec) exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The code then incorrectly assumes this is the last extent, sets nr_pblocks = last_lblock - cur_lblock (entire swapfile), and performs migration. After migration, it doesn't retry mapping, so subsequent extents are never processed. " In order to fix this issue, we need to lookup block mapping info after we migrate all blocks in the tail of swapfile.

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: cancel queued works in probe error path If it fails to get the devices's MAC address, octep_probe exits while leaving the delayed work intr_poll_task queued. When the work later runs, it's a use after free. Move the cancelation of intr_poll_task from octep_remove into octep_device_cleanup. This does not change anything in the octep_remove flow, but octep_device_cleanup is called also in the octep_probe error path, where the cancelation is needed. Note that the cancelation of ctrl_mbox_task has to follow intr_poll_task's, because the ctrl_mbox_task may be queued by intr_poll_task.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Return the correct value in vmw_translate_ptr functions Before the referenced fixes these functions used a lookup function that returned a pointer. This was changed to another lookup function that returned an error code with the pointer becoming an out parameter. The error path when the lookup failed was not changed to reflect this change and the code continued to return the PTR_ERR of the now uninitialized pointer. This could cause the vmw_translate_ptr functions to return success when they actually failed causing further uninitialized and OOB accesses.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Prevent excessive number of frames In this case, the user constructed the parameters with maxpacksize 40 for rate 22050 / pps 1000, and packsize[0] 22 packsize[1] 23. The buffer size for each data URB is maxpacksize * packets, which in this example is 40 * 6 = 240; When the user performs a write operation to send audio data into the ALSA PCM playback stream, the calculated number of frames is packsize[0] * packets = 264, which exceeds the allocated URB buffer size, triggering the out-of-bounds (OOB) issue reported by syzbot [1]. Added a check for the number of single data URB frames when calculating the number of frames to prevent [1]. [1] BUG: KASAN: slab-out-of-bounds in copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 Write of size 264 at addr ffff88804337e800 by task syz.0.17/5506 Call Trace: copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487 prepare_playback_urb+0x953/0x13d0 sound/usb/pcm.c:1611 prepare_outbound_urb+0x377/0xc50 sound/usb/endpoint.c:333