A vulnerability was found in D-Link DCS-935L up to 1.10.01. The impacted element is the function SetDeviceSettings of the file /web/cgi-bin/hnap/hnap_service of the component HNAP Service. The manipulation of the argument AdminPassword results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the wps_sta_enrollee_pin parameter in a set_sta_enrollee_pin.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. There is a stack-based buffer overflow in the httpd binary. It allows an authenticated user to execute arbitrary code via a POST to ntp_sync.cgi with a sufficiently long parameter ntp_server.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

A weakness has been identified in D-Link DIR-816 1.10CNB05_R1B011D88210. Affected by this vulnerability is the function sub_445E7C of the file /goform/formDMZ.cgi. This manipulation causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was detected in D-Link DIR-816 1.10CNB05_R1B011D88210. This affects the function portForward. Performing a manipulation of the argument ip_address results in command injection. The attack can be initiated remotely. The exploit is now public and may be used.

A security vulnerability has been detected in D-Link DIR-816 1.10CNB05_R1B011D88210. Affected by this issue is the function sub_445E7C of the file /goform/singlePortForward. Such manipulation of the argument ip_address leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

An issue found in D-Link DSL-3782 v.1.03 allows remote authenticated users to execute arbitrary code as root via the network settings page.

A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the ntp_server parameter in an ntp_sync.cgi POST request.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

A vulnerability has been found in D-Link DIR-825M 1.1.12. This vulnerability affects the function sub_4151FC of the file /boafrm/formVpnConfigSetup. The manipulation of the argument submit-url leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field.

A vulnerability was found in D-Link DIR-825M 1.1.12. This issue affects the function sub_414BA8 of the file /boafrm/formWanConfigSetup. The manipulation of the argument submit-url results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field.

A vulnerability has been found in D-Link DAR-7000 3.2 and classified as critical. This vulnerability affects the function get_ip_addr_details of the file /view/vpn/sxh_vpn/sxh_vpnlic.php of the component HTTP POST Request Handler. The manipulation of the argument ethname leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An OS command injection vulnerability exists in multiple D-Link routers (confirmed on DIR-300 rev A v1.05 and DIR-615 rev D v4.13) via the authenticated tools_vct.xgi CGI endpoint. The web interface fails to properly sanitize user-supplied input in the pingIp parameter, allowing attackers with valid credentials to inject arbitrary shell commands. Exploitation enables full device compromise, including spawning a telnet daemon and establishing a root shell. The vulnerability is present in firmware versions that expose tools_vct.xgi and use the Mathopd/1.5p6 web server. No vendor patch is available, and affected models are end-of-life.

In the "webupg" binary of D-Link DIR-825 G1, because of the lack of parameter verification, attackers can use "cmd" parameters to execute arbitrary system commands after obtaining authorization.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSchedule.

A vulnerability was detected in D-Link DIR-605L 2.13B01. Affected by this vulnerability is the function formVirtualServ of the file /goform/formVirtualServ of the component POST Request Handler. The manipulation of the argument curTime results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in D-Link DIR-605L 2.13B01. Affected by this issue is the function formSetMACFilter of the file /goform/formSetMACFilter of the component POST Request Handler. This manipulation of the argument curTime causes buffer overflow. The attack may be initiated remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the curTime parameter at /goform/formSetWanDhcpplus.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the webpage parameter at /goform/formWlanGuestSetup.

A vulnerability was detected in D-Link DIR-645 1.01/1.02/1.03. Impacted is the function hedwigcgi_main of the file /cgi-bin/hedwig.cgi. The manipulation results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link N300 WI-FI Router DIR-605L v2.13B01 was discovered to contain a stack overflow via the webpage parameter at /goform/formSetWanDhcpplus.

A vulnerability was identified in D-Link DWR-M920 up to 1.1.50. This issue affects the function sub_464794 of the file /boafrm/formDefRoute. The manipulation of the argument submit-url leads to buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used.

A security flaw has been discovered in D-Link DWR-M920 up to 1.1.50. Impacted is the function sub_42261C of the file /boafrm/formFilter. The manipulation of the argument ip6addr results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited.

A vulnerability was found in D-Link DIR-605L 2.13B01. This vulnerability affects the function formAdvNetwork of the file /goform/formAdvNetwork of the component POST Request Handler. Performing a manipulation of the argument curTime results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1320 1.00. Affected by this issue is the function replace_special_char of the file /storagein.pd-XXXXXX. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DIR-513 1.10. This vulnerability affects the function formSetRoute of the file /goform/formSetRoute of the component POST Request Handler. The manipulation of the argument curTime results in buffer overflow. The attack may be performed from remote. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in D-Link DWR-M920 up to 1.1.50. The affected element is the function sub_4155B4 of the file /boafrm/formLtefotaUpgradeFibocom. This manipulation of the argument fota_url causes command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited.

A vulnerability classified as critical was found in D-Link DAP-1320 1.00. Affected by this vulnerability is the function set_ws_action of the file /dws/api/. The manipulation leads to heap-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security vulnerability has been detected in D-Link DIR-513 1.10. This affects the function formSetPassword of the file /goform/formSetPassword of the component POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DWR-M920 up to 1.1.50. This affects the function sub_423848 of the file /boafrm/formParentControl. Performing manipulation of the argument submit-url results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used.

A vulnerability was identified in D-Link DIR-605L 2.13B01. Impacted is the function formSetLog of the file /goform/formSetLog of the component POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in D-Link DIR-605L 2.13B01. This issue affects the function formSetDDNS of the file /goform/formSetDDNS of the component POST Request Handler. Executing a manipulation of the argument curTime can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-605L 2.13B01. This affects the function formAdvFirewall of the file /goform/formAdvFirewall of the component POST Request Handler. Such manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in D-Link DIR-513 1.10. This issue affects the function formAdvanceSetup of the file /goform/formAdvanceSetup of the component POST Request Handler. This manipulation of the argument webpage causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-816L 2_06_b09_beta. This vulnerability affects the function scandir_main of the file /portal/__ajax_exporer.sgi. The manipulation of the argument en results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-822K 1.00. This issue affects the function sub_455524 of the file /boafrm/formNtp. Performing manipulation of the argument submit-url results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

A vulnerability was identified in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. The affected element is an unknown function of the file /boafrm/formWanConfigSetup. The manipulation of the argument submit-url leads to buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A vulnerability has been found in D-Link DIR-816L 2_06_b09_beta. This affects the function genacgi_main of the file gena.cgi. The manipulation of the argument SERVER_ID/HTTP_SID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in D-Link DIR-822K and DWR-M920 1.00_20250513164613/1.1.50. This affects an unknown part of the file /boafrm/formDdns. This manipulation of the argument submit-url causes memory corruption. The attack may be initiated remotely. The exploit has been published and may be used.

A vulnerability has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function Webdav_Upload_File of the file /cgi-bin/webdav_mgr.cgi. The manipulation of the argument f_file leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-513 1.10. This issue affects the function formSetEmail of the file /goform/formSetEmail. Performing a manipulation of the argument curTime results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.