vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.2, This vulnerability is fixed in 3.11.2.

PyTorch Lightning is a deep learning framework to pretrain and finetune AI models. Versions 2.6.2 and 2.6.2 have introduced functionality consistent with a credential harvesting mechanism.

An LDAP injection vulnerability in the LDAP Certificate repository of the XKMS server in Apache CXF may allow an attacker to retrieve arbitrary certificates from the repository.  Users are recommended to upgrade to versions 4.2.1, 4.1.6 or 3.6.11, which fix this issue.

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data, a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE). To fix this we clear skb2->cb[], as suggested by Oskar Kjos. Also add minimal IPv4 header validation (version == 4, ihl >= 5).

In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway.

In the Linux kernel, the following vulnerability has been resolved: dlm: validate length in dlm_search_rsb_tree The len parameter in dlm_dump_rsb_name() is not validated and comes from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can cause out-of-bounds write in dlm_search_rsb_tree(). Add length validation to prevent potential buffer overflow.

Rclone is a command-line program to sync files and directories to and from different cloud storage providers. The RC endpoint `options/set` is exposed without `AuthRequired: true`, but it can mutate global runtime configuration, including the RC option block itself. Starting in version 1.45.0 and prior to version 1.73.5, an unauthenticated attacker can set `rc.NoAuth=true`, which disables the authorization gate for many RC methods registered with `AuthRequired: true` on reachable RC servers that are started without global HTTP authentication. This can lead to unauthorized access to sensitive administrative functionality, including configuration and operational RC methods. Version 1.73.5 patches the issue.

cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. From 45.0.0 to before 46.0.7, if a non-contiguous buffer was passed to APIs which accepted Python buffers (e.g. Hash.update()), this could lead to buffer overflows. This vulnerability is fixed in 46.0.7.

Helm is a package manager for Charts for Kubernetes. From 4.0.0 to 4.1.3, Helm will install plugins missing provenance (.prov file) when signature verification is required. This vulnerability is fixed in 4.1.4.

In all versions of libyang before 1.0-r5, a stack-based buffer overflow was discovered in the way libyang parses YANG files with a leaf of type "identityref". An application that uses libyang to parse untrusted YANG files may be vulnerable to this flaw, which would allow an attacker to cause a denial of service or possibly gain code execution.

In all versions of libyang before 1.0-r5, a stack-based buffer overflow was discovered in the way libyang parses YANG files with a leaf of type "bits". An application that uses libyang to parse untrusted YANG files may be vulnerable to this flaw, which would allow an attacker to cause a denial of service or possibly gain code execution.

A flaw was found in the Kubernetes service for notebooks in RHODS, where it does not prevent pods from other namespaces and applications from making requests to the Jupyter API. This flaw can lead to file content exposure and other issues.

flatted is a circular JSON parser. Prior to version 3.4.2, the parse() function in flatted can use attacker-controlled string values from the parsed JSON as direct array index keys, without validating that they are numeric. Since the internal input buffer is a JavaScript Array, accessing it with the key "__proto__" returns Array.prototype via the inherited getter. This object is then treated as a legitimate parsed value and assigned as a property of the output object, effectively leaking a live reference to Array.prototype to the consumer. Any code that subsequently writes to that property will pollute the global prototype. This issue has been patched in version 3.4.2.

Active Storage allows users to attach cloud and local files in Rails applications. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, Active Storage's `DiskService#path_for` does not validate that the resolved filesystem path remains within the storage root directory. If a blob key containing path traversal sequences (e.g. `../`) is used, it could allow reading, writing, or deleting arbitrary files on the server. Blob keys are expected to be trusted strings, but some applications could be passing user input as keys and would be affected. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch.

OpenTelemetry Java Instrumentation provides OpenTelemetry auto-instrumentation and instrumentation libraries for Java. In versions prior to 2.26.1, the RMI instrumentation registered a custom endpoint that deserialized incoming data without applying serialization filters. On JDK version 16 and earlier, an attacker with network access to a JMX or RMI port on an instrumented JVM could exploit this to potentially achieve remote code execution. All three of the following conditions must be true to exploit this vulnerability: First, OpenTelemetry Java instrumentation is attached as a Java agent (`-javaagent`) on Java 16 or earlier. Second, JMX/RMI port has been explicitly configured via `-Dcom.sun.management.jmxremote.port` and is network-reachable. Third, gadget-chain-compatible library is present on the classpath. This results in arbitrary remote code execution with the privileges of the user running the instrumented JVM. For JDK >= 17, no action is required, but upgrading is strongly encouraged. For JDK < 17, upgrade to version 2.26.1 or later. As a workaround, set the system property `-Dotel.instrumentation.rmi.enabled=false` to disable the RMI integration.

Memory-safety vulnerability in github.com/jackc/pgx/v5.

Memory-safety vulnerability in github.com/jackc/pgx/v5.

NLnet Labs Unbound 1.19.1 up to and including version 1.25.0 has a vulnerability in the DNSSEC validator that enables denial of service and possible remote code execution as a result of deep copying a data structure and erroneously overwriting a destination pointer. An adversary can exploit the vulnerability by controlling a malicious signed zone and querying a vulnerable Unbound. When DS sub-queries need to suspend validation due to NSEC3 computational budget exhaustion (introduced in Unbound 1.19.1), Unbound deep-copies response messages to preserve them across memory region teardown. A struct-assignment bug overwrites the destination's pointer with the source's pointer. After the sub-query region is freed, the resumed validator dereferences this dangling pointer, triggering a crash or potentially enabling arbitrary code execution. Unbound 1.25.1 contains a patch with a fix to preserve the correct pointer when deep copying the data structure.

Locutus brings stdlibs of other programming languages to JavaScript for educational purposes. Prior to 3.0.14, the create_function(args, code) function passes both parameters directly to the Function constructor without any sanitization, allowing arbitrary code execution. This is distinct from CVE-2026-29091 which was call_user_func_array using eval() in v2.x. This finding affects create_function using new Function() in v3.x. This vulnerability is fixed in 3.0.14.

SimpleEval is a library for adding evaluatable expressions into python projects. Prior to 1.0.5, objects (including modules) can leak dangerous modules through to direct access inside the sandbox. If the objects you've passed in as names to SimpleEval have modules or other disallowed / dangerous objects available as attrs. Additionally, dangerous functions or modules could be accessed by passing them as callbacks to other safe functions to call. The latest version 1.0.5 has this issue fixed. This vulnerability is fixed in 1.0.5.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, the gdi_surface_bits() function processes SURFACE_BITS_COMMAND messages sent by the RDP server. When the command is handled using NSCodec, the bmp.width and bmp.height values provided by the server are not properly validated against the actual desktop dimensions. A malicious RDP server can supply crafted bmp.width and bmp.height values that exceed the expected surface size. Because these values are used during bitmap decoding and memory operations without proper bounds checking, this can lead to a heap buffer overflow. Since the attacker can also control the associated pixel data transmitted by the server, the overflow may be exploitable to overwrite adjacent heap memory. This vulnerability is fixed in 3.24.0.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request.

In the Linux kernel, the following vulnerability has been resolved: usbip: validate number_of_packets in usbip_pack_ret_submit() When a USB/IP client receives a RET_SUBMIT response, usbip_pack_ret_submit() unconditionally overwrites urb->number_of_packets from the network PDU. This value is subsequently used as the loop bound in usbip_recv_iso() and usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible array whose size was fixed at URB allocation time based on the *original* number_of_packets from the CMD_SUBMIT. A malicious USB/IP server can set number_of_packets in the response to a value larger than what was originally submitted, causing a heap out-of-bounds write when usbip_recv_iso() writes to urb->iso_frame_desc[i] beyond the allocated region. KASAN confirmed this with kernel 7.0.0-rc5: BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640 Write of size 4 at addr ffff888106351d40 by task vhci_rx/69 The buggy address is located 0 bytes to the right of allocated 320-byte region [ffff888106351c00, ffff888106351d40) The server side (stub_rx.c) and gadget side (vudc_rx.c) already validate number_of_packets in the CMD_SUBMIT path since commits c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input"). The server side validates against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point. On the client side we have the original URB, so we can use the tighter bound: the response must not exceed the original number_of_packets. This mirrors the existing validation of actual_length against transfer_buffer_length in usbip_recv_xbuff(), which checks the response value against the original allocation size. Kelvin Mbogo's series ("usb: usbip: fix integer overflow in usbip_recv_iso()", v2) hardens the receive-side functions themselves; this patch complements that work by catching the bad value at its source -- in usbip_pack_ret_submit() before the overwrite -- and using the tighter per-URB allocation bound rather than the global USBIP_MAX_ISO_PACKETS limit. Fix this by checking rpdu->number_of_packets against urb->number_of_packets in usbip_pack_ret_submit() before the overwrite. On violation, clamp to zero so that usbip_recv_iso() and usbip_pad_iso() safely return early.

The Adversarial Robustness Toolbox (ART) thru 1.20.1 contains a remote code execution vulnerability in its Kubeflow component. The robustness evaluation function for PyTorch models uses the unsafe eval() function to dynamically evaluate user-supplied strings for the LossFn and Optimizer parameters without any sanitization or security restrictions. An attacker can exploit this by providing a specially crafted string that contains arbitrary Python code, which will be executed when eval() is called, leading to complete compromise of the system running the ART evaluation.

The llm CLI tool thru 0.27.1 contains a critical code injection vulnerability via its --functions command-line argument. This argument is intended to allow users to provide custom Python function definitions. However, the tool directly executes the provided code using the unsafe exec() function without any sanitization, sandboxing, or security restrictions. An attacker can exploit this by crafting a malicious llm command with arbitrary Python code in the --functions argument and using social engineering to trick a victim into running it. This leads to arbitrary code execution on the victim's system, potentially granting the attacker full control.

The JSONSerializer and CBORSerializer in APScheduler (all versions including 3.10.x and 4.0.0a5) are vulnerable to Remote Code Execution (RCE) via Insecure Deserialization. The unmarshal_object function allows for arbitrary class instantiation and state injection by dynamically importing modules and calling __setstate__ on any class available in the Python environment. An attacker can exploit this by submitting a specially crafted JSON or CBOR payload to an application using these serializers

Authlib is a Python library which builds OAuth and OpenID Connect servers. From version 1.6.5 to before version 1.6.7, previous tests involving passing a malicious JWT containing alg: none and an empty signature was passing the signature verification step without any changes to the application code when a failure was expected.. This issue has been patched in version 1.6.7.

Backstage is an open framework for building developer portals. Prior to version 1.14.3, this is a configuration bypass vulnerability that enables arbitrary code execution. The @backstage/plugin-techdocs-node package uses an allowlist to filter dangerous MkDocs configuration keys during the documentation build process. A gap in this allowlist allows attackers to craft an mkdocs.yml that causes arbitrary Python code execution, completely bypassing TechDocs' security controls. This issue has been patched in version 1.14.3.

mchange-commons-java, a library that provides Java utilities, includes code that mirrors early implementations of JNDI functionality, including support for remote `factoryClassLocation` values, by which code can be downloaded and invoked within a running application. If an attacker can provoke an application to read a maliciously crafted `jaxax.naming.Reference` or serialized object, they can provoke the download and execution of malicious code. Implementations of this functionality within the JDK were disabled by default behind a System property that defaults to `false`, `com.sun.jndi.ldap.object.trustURLCodebase`. However, since mchange-commons-java includes an independent implementation of JNDI derefencing, libraries (such as c3p0) that resolve references via that implementation could be provoked to download and execute malicious code even after the JDK was hardened. Mirroring the JDK patch, mchange-commons-java's JNDI functionality is gated by configuration parameters that default to restrictive values starting in version 0.4.0. No known workarounds are available. Versions prior to 0.4.0 should be avoided on application CLASSPATHs.

Use-after-free in the DOM: Bindings (WebIDL) component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Incorrect boundary conditions in the WebRTC: Audio/Video component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Use-after-free in the JavaScript: GC component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Use-after-free in the JavaScript Engine component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Undefined behavior in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Mitigation bypass in the DOM: HTML Parser component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Privilege escalation in the Messaging System component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Memory safety bugs present in Firefox ESR 115.32, Firefox ESR 140.7, Thunderbird ESR 140.7, Firefox 147 and Thunderbird 147. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Use-after-free in the JavaScript: GC component. This vulnerability was fixed in Firefox 148 and Thunderbird 148.

JIT miscompilation in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 148 and Thunderbird 148.

Use-after-free in the JavaScript: GC component. This vulnerability was fixed in Firefox 148 and Thunderbird 148.

Memory safety bugs present in Firefox 147 and Thunderbird 147. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 148 and Thunderbird 148.

pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 22.0.0 and prior to version 26.0.0, if a user provided callback to `set_cookie_generate_callback` returned a cookie value greater than 256 bytes, pyOpenSSL would overflow an OpenSSL provided buffer. Starting in version 26.0.0, cookie values that are too long are now rejected.

Use-after-free in the JavaScript Engine component. This vulnerability was fixed in Firefox 148, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Use-after-free in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 148, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Use-after-free in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 148, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.