A code injection in Ivanti Endpoint Manager Mobile allowing attackers to achieve unauthenticated remote code execution.

cron-utils is a Java library to define, parse, validate, migrate crons as well as get human readable descriptions for them. In affected versions A template Injection was identified in cron-utils enabling attackers to inject arbitrary Java EL expressions, leading to unauthenticated Remote Code Execution (RCE) vulnerability. Versions up to 9.1.2 are susceptible to this vulnerability. Please note, that only projects using the @Cron annotation to validate untrusted Cron expressions are affected. The issue was patched and a new version was released. Please upgrade to version 9.1.6. There are no known workarounds known.

remote code execution in paddlepaddle/paddle 2.6.0

Improper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in a Command ('Command Injection'), Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in BG-TEK Informatics Security Technologies CoslatV3 allows Command Injection, Privilege Escalation.This issue affects CoslatV3: through 3.1069. NOTE: The vendor was contacted and it was learned that the product is not supported.

playSMS before 1.4.5 allows Arbitrary Code Execution by entering PHP code at the #tabs-information-page of core_main_config, and then executing that code via the index.php?app=main&inc=core_welcome URI.

An issue was discovered in /Upload/admin/admin_notify.php in Seacms 11.4 allows attackers to execute arbitrary php code via the notify1 parameter when the action parameter equals set.

Remote command execution vulnerability in SE-elektronic GmbH E-DDC3.3 affecting versions 03.07.03 and higher. An attacker could send different commands from the operating system to the system via the web configuration functionality of the device.

An issue in D-Link DWR-M972V 1.05SSG allows a remote attacker to execute arbitrary code via SSH using root account without restrictions

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unity Connection, and Cisco Webex Calling Dedicated Instance could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device.  This vulnerability is due to improper validation of user-supplied input in HTTP requests. An attacker could exploit this vulnerability by sending a sequence of crafted HTTP requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root.  Note: Cisco has assigned this security advisory a Security Impact Rating (SIR) of Critical rather than High as the score indicates. The reason is that exploitation of this vulnerability could result in an attacker elevating privileges to root.

A vulnerability, which was classified as critical, has been found in 个人开源 mldong 1.0. This issue affects the function ExpressionEngine of the file com/mldong/modules/wf/engine/model/DecisionModel.java. The manipulation leads to code injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-251561 was assigned to this vulnerability.

HHEE system has a Code Injection vulnerability.Successful exploitation of this vulnerability may affect HHEE system integrity.

A vulnerability, which was classified as critical, was found in spider-flow 0.4.3. Affected is the function FunctionService.saveFunction of the file src/main/java/org/spiderflow/controller/FunctionController.java. The manipulation leads to code injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-249510 is the identifier assigned to this vulnerability.

The MojoHaus Exec Maven plugin 1.1.1 for Maven allows code execution via a crafted XML document because a configuration element (within a plugin element) can specify an arbitrary program in an executable element (and can also specify arbitrary command-line arguments in an arguments element).

The Mock software contains a vulnerability wherein an attacker could potentially exploit privilege escalation, enabling the execution of arbitrary code with root user privileges. This weakness stems from the absence of proper sandboxing during the expansion and execution of Jinja2 templates, which may be included in certain configuration parameters. While the Mock documentation advises treating users added to the mock group as privileged, certain build systems invoking mock on behalf of users might inadvertently permit less privileged users to define configuration tags. These tags could then be passed as parameters to mock during execution, potentially leading to the utilization of Jinja2 templates for remote privilege escalation and the execution of arbitrary code as the root user on the build server.

An attacker is able to gain remote code execution on a server hosting the H2O dashboard through it's POJO model import feature.

A vulnerability was found in GetSimpleCMS 3.3.16/3.4.0a. It has been rated as critical. This issue affects some unknown processing of the file /admin/theme-edit.php. The manipulation leads to code injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-245735.

The Syrus4 IoT gateway utilizes an unsecured MQTT server to download and execute arbitrary commands, allowing a remote unauthenticated attacker to execute code on any Syrus4 device connected to the cloud service. The MQTT server also leaks the location, video and diagnostic data from each connected device. An attacker who knows the IP address of the server is able to connect and perform the following operations: * Get location data of the vehicle the device is connected to * Send CAN bus messages via the ECU module ( https://syrus.digitalcomtech.com/docs/ecu-1 https://syrus.digitalcomtech.com/docs/ecu-1 ) * Immobilize the vehicle via the safe-immobilizer module ( https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization ) * Get live video through the connected video camera * Send audio messages to the driver ( https://syrus.digitalcomtech.com/docs/system-tools#apx-tts https://syrus.digitalcomtech.com/docs/system-tools#apx-tts )

A vulnerability classified as problematic was found in rmountjoy92 DashMachine 0.5-4. Affected by this vulnerability is an unknown functionality of the file /settings/save_config of the component Config Handler. The manipulation of the argument value_template leads to code injection. The exploit has been disclosed to the public and may be used. The identifier VDB-248257 was assigned to this vulnerability.

BinderHub is a kubernetes-based cloud service that allows users to share reproducible interactive computing environments from code repositories. In affected versions a remote code execution vulnerability has been identified in BinderHub, where providing BinderHub with maliciously crafted input could execute code in the BinderHub context, with the potential to egress credentials of the BinderHub deployment, including JupyterHub API tokens, kubernetes service accounts, and docker registry credentials. This may provide the ability to manipulate images and other user created pods in the deployment, with the potential to escalate to the host depending on the underlying kubernetes configuration. Users are advised to update to version 0.2.0-n653. If users are unable to update they may disable the git repo provider by specifying the `BinderHub.repo_providers` as a workaround.

A vulnerability was found in xnx3 wangmarket 6.1. It has been rated as critical. Affected by this issue is some unknown functionality of the component Role Management Page. The manipulation leads to code injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-248246 is the identifier assigned to this vulnerability.

Code Injection in GitHub repository salesagility/suitecrm prior to 7.14.2, 7.12.14, 8.4.2.

SQL Injection vulnerability in the Simple Student Attendance System v.1.0 allows a remote attacker to execute arbitrary code via a crafted payload to the id parameter in the student_form.php and the class_form.php pages.

Possible Command injection Vulnerability in iManager has been discovered in OpenText™ iManager 3.2.4.0000.

In a shared hosting environment that has been misconfigured to allow access to other users' content, a Moodle user who also has direct access to the web server outside of the Moodle webroot could utilise a local file include to achieve remote code execution.

xunruicms up to v4.5.1 was discovered to contain a remote code execution (RCE) vulnerability in /index.php. This vulnerability allows attackers to execute arbitrary code via a crafted GET request.

Atos Unify OpenScape 4000 Assistant V10 R1 before V10 R1.42.0 and V10 R1.34.8 and Manager V10 R1 before V10 R1.42.0 and V10 R1.34.8 allow remote code execution by unauthenticated users, aka OSFOURK-24033.

The Asgaros Forum WordPress plugin before 2.7.1 allows forum administrators, who may not be WordPress (super-)administrators, to set insecure configuration that allows unauthenticated users to upload dangerous files (e.g. .php, .phtml), potentially leading to remote code execution.

For RocketMQ versions 5.1.0 and below, under certain conditions, there is a risk of remote command execution.  Several components of RocketMQ, including NameServer, Broker, and Controller, are leaked on the extranet and lack permission verification, an attacker can exploit this vulnerability by using the update configuration function to execute commands as the system users that RocketMQ is running as. Additionally, an attacker can achieve the same effect by forging the RocketMQ protocol content.  To prevent these attacks, users are recommended to upgrade to version 5.1.1 or above for using RocketMQ 5.x or 4.9.6 or above for using RocketMQ 4.x .

An improper control of generation of code vulnerability has been reported to affect Malware Remover. The remote attackers can then exploit the vulnerability to bypass protection mechanism. We have already fixed the vulnerability in the following version: Malware Remover 6.6.8.20251023 and later

RCE (Remote Code Execution) vulnerability was found in some Furukawa ONU models, this vulnerability allows remote unauthenticated users to send arbitrary commands to the device via web interface.

The Zabbix Agent 2 item key smart.disk.get does not sanitize its parameters before passing them to a shell command resulting possible vulnerability for remote code execution.

TOTOlink EX1800T v9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the ‘opmode’ parameter of the setWiFiApConfig interface of the cstecgi .cgi.

SQLite JDBC is a library for accessing and creating SQLite database files in Java. Sqlite-jdbc addresses a remote code execution vulnerability via JDBC URL. This issue impacting versions 3.6.14.1 through 3.41.2.1 and has been fixed in version 3.41.2.2.

In Xerox FreeFlow Core version 8.0.4, an attacker can exploit a Path Traversal vulnerability to access unauthorized files on the server. This can lead to Remote Code Execution (RCE), allowing the attacker to run arbitrary commands on the system.

CodeIgniter is a PHP full-stack web framework. This vulnerability allows attackers to execute arbitrary code when you use Validation Placeholders. The vulnerability exists in the Validation library, and validation methods in the controller and in-model validation are also vulnerable because they use the Validation library internally. This issue is patched in version 4.3.5.

A bug in WebAssembly code generation could have lead to a crash. It may have been possible for an attacker to leverage this to achieve code execution. This vulnerability affects Firefox < 135, Firefox ESR < 128.7, Thunderbird < 128.7, and Thunderbird < 135.

In Advantech WebAccss/SCADA v9.1.3 and prior, there is an arbitrary file overwrite vulnerability, which could allow an attacker to overwrite any file in the operating system (including system files), inject code into an XLS file, and modify the file extension, which could lead to arbitrary code execution.

The WPCasa plugin for WordPress is vulnerable to Code Injection in all versions up to, and including, 1.4.1. This is due to insufficient input validation and restriction on the 'api_requests' function. This makes it possible for unauthenticated attackers to call arbitrary functions and execute code.

A Server-Side Template Injection (SSTI) vulnerability exists in the Frappe ERPNext through 15.89.0 Print Format rendering mechanism. Specifically, the API frappe.www.printview.get_html_and_style() triggers the rendering of the html field inside a Print Format document using frappe.render_template(template, doc) via the get_rendered_template() call chain. Although ERPNext wraps Jinja2 in a SandboxedEnvironment, it exposes sensitive functions such as frappe.db.sql through get_safe_globals(). An authenticated attacker with permission to create or modify a Print Format can inject arbitrary Jinja expressions into the html field. Once the malicious Print Format is saved, the attacker can call get_html_and_style() with a target document (e.g., Supplier or Sales Invoice) to trigger the render process. This leads to information disclosure from the database, such as database version, schema details, or sensitive values, depending on the injected payload. Exploitation flow: Create a Print Format with SSTI payload in the html field; call the get_html_and_style() API; triggers frappe.render_template(template, doc) inside get_rendered_template(); leaks database information via frappe.db.sql or other exposed globals.

Code Injection in GitHub repository nuxt/nuxt prior to 3.5.3.

The Cloudflare Image Resizing plugin for WordPress is vulnerable to Remote Code Execution due to missing authentication and insufficient sanitization within its hook_rest_pre_dispatch() method in all versions up to, and including, 1.5.6. This makes it possible for unauthenticated attackers to inject arbitrary PHP into the codebase, achieving remote code execution.

Hidden functionality vulnerability in LAN-W300N/RS all versions, and LAN-W300N/PR5 all versions allows an unauthenticated attacker to log in to the product's certain management console and execute arbitrary OS commands.

JimuReport thru version 2.1.3 is vulnerable to remote code execution when processing user-controlled H2 JDBC URLs. The application passes the attacker-supplied JDBC URL directly to the H2 driver, allowing the use of certain directives to execute arbitrary Java code. A different vulnerability than CVE-2025-10770.

The The WP Popup Builder – Popup Forms and Marketing Lead Generation plugin for WordPress is vulnerable to arbitrary shortcode execution via the wp_ajax_nopriv_shortcode_Api_Add AJAX action in all versions up to, and including, 1.3.5. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. NOTE: This vulnerability was partially fixed in version 1.3.5 with a nonce check, which effectively prevented access to the affected function. However, version 1.3.6 incorporates the correct authorization check to prevent unauthorized access.

Aigital Wireless-N Repeater Mini_Router v0.131229 was discovered to contain a remote code execution (RCE) vulnerability via the sysCmd parameter in the formSysCmd function. This vulnerability is exploited via a crafted HTTP request.

IBM i 7.2, 7.3, 7.4, and 7.5 could allow a remote attacker to execute CL commands as QUSER, caused by an exploitation of DDM architecture. IBM X-Force ID: 254036.

A remote code execution issue exists in HPE OneView.

JFinal CMS v5.1.0 was discovered to contain a remote code execution (RCE) vulnerability via the ActionEnter function.

Templates do not properly consider backticks (`) as Javascript string delimiters, and do not escape them as expected. Backticks are used, since ES6, for JS template literals. If a template contains a Go template action within a Javascript template literal, the contents of the action can be used to terminate the literal, injecting arbitrary Javascript code into the Go template. As ES6 template literals are rather complex, and themselves can do string interpolation, the decision was made to simply disallow Go template actions from being used inside of them (e.g., "var a = {{.}}"), since there is no obviously safe way to allow this behavior. This takes the same approach as github.com/google/safehtml. With fix, Template. Parse returns an Error when it encounters templates like this, with an ErrorCode of value 12. This ErrorCode is currently unexported but will be exported in the release of Go 1.21. Users who rely on the previous behavior can re-enable it using the GODEBUG flag jstmpllitinterp=1, with the caveat that backticks will now be escaped. This should be used with caution.

The go command may execute arbitrary code at build time when using cgo. This may occur when running "go get" on a malicious module, or when running any other command which builds untrusted code. This is can by triggered by linker flags, specified via a "#cgo LDFLAGS" directive. The arguments for a number of flags which are non-optional are incorrectly considered optional, allowing disallowed flags to be smuggled through the LDFLAGS sanitization. This affects usage of both the gc and gccgo compilers.