IBM Cognos Controller 11.0.0 and 11.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Engineering Lifecycle Optimization - Publishing 7.0.2 and 7.0.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Sterling Connect:Direct Web Services 6.0, 6.1, 6.2, and 6.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Datacap Navigator 9.1.5, 9.1.6, 9.1.7, 9.1.8, and 9.1.9 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 295970.

IBM Maximo Application Suite - Manage Component 8.10, 8.11, and 9.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information using man in the middle techniques.

A vulnerability was found in NFine Rapid Development Platform 20230511. It has been classified as problematic. Affected is an unknown function of the file /Login/CheckLogin. The manipulation leads to use of weak hash. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. VDB-229974 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Guardium 10.5 and 11.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt sensitive information. IBM X-Force ID: 215585.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 use weak encryption for packet-level security and passwords transferred on the wire.

IBM Security Verify Information Queue 10.0.5, 10.0.6, 10.0.7, and 10.0.8 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Security Verify 10.0.0, 10.0.1.0, and 10.0.2.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210067.

IBM Spectrum Copy Data Management 2.2.13 and earlier uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 214617.

IBM Sterling Connect:Direct for UNIX 1.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210574.

IBM UrbanCode Deploy (UCD) 7.1.1.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

EnroCrypt is a Python module for encryption and hashing. Prior to version 1.1.4, EnroCrypt used the MD5 hashing algorithm in the hashing file. Beginners who are unfamiliar with hashes can face problems as MD5 is considered an insecure hashing algorithm. The vulnerability is patched in v1.1.4 of the product. As a workaround, users can remove the `MD5` hashing function from the file `hashing.py`.

IBM Counter Fraud Management for Safer Payments 6.1.0.00 through 6.1.1.02, 6.2.0.00 through 6.2.2.02, 6.3.0.00 through 6.3.1.02, 6.4.0.00 through 6.4.2.01, and 6.5.0.00 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 249192.

libxcrypt in SUSE openSUSE 11.0 uses the DES algorithm when the configuration specifies the MD5 algorithm, which makes it easier for attackers to conduct brute-force attacks against hashed passwords.

IBM QRadar SIEM 7.5.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 248147.

TVS Motor Company Limited TVS Connect Android v4.6.0 and IOS v5.0.0 was discovered to insecurely handle the RSA key pair, allowing attackers to possibly access sensitive information via decryption.

Jervis is a library for Job DSL plugin scripts and shared Jenkins pipeline libraries. Prior to 2.2, Jervis uses deterministic AES IV derivation from a passphrase. This vulnerability is fixed in 2.2.

Jervis is a library for Job DSL plugin scripts and shared Jenkins pipeline libraries. Prior to 2.2, Jervis uses PKCS1Encoding which is vulnerable to Bleichenbacher padding oracle attacks. Modern systems should use OAEP (Optimal Asymmetric Encryption Padding). This vulnerability is fixed in 2.2.

A static initialization vector (IV) in the encrypt function of netbird management's service from v0.23.2 to v0.29.1 allows attackers to obtain sensitive information (email addresses) when in possession of the audit events database.

TP-Link router TL-WR940N V6 3.19.1 Build 180119 uses a deprecated MD5 algorithm to hash the admin password used for basic authentication.

The use of a broken or risky cryptographic algorithm in Philips Vue PACS versions 12.2.x.x and prior is an unnecessary risk that may result in the exposure of sensitive information.

IBM Storage Protect for Virtual Environments: Data Protection for VMware and Storage Protect Backup-Archive Client 8.1.0.0 through 8.1.23.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

Apache Syncope can be configured to store the user password values in the internal database with AES encryption, though this is not the default option. When AES is configured, the default key value, hard-coded in the source code, is always used. This allows a malicious attacker, once obtained access to the internal database content, to reconstruct the original cleartext password values. This is not affecting encrypted plain attributes, whose values are also stored using AES encryption. Users are recommended to upgrade to version 3.0.15 / 4.0.3, which fix this issue.

An inadequate encryption vulnerability discovered in CyberArk Credential Provider before 12.1 may lead to Information Disclosure. An attacker may realistically have enough information that the number of possible keys (for a credential file) is only one, and the number is usually not higher than 2^36.

The encrypt() function of Ninja Core v7.0.0 was discovered to use a weak cryptographic algorithm, leading to a possible leakage of sensitive information.

IBM Cloud Pak for Security (CP4S) 1.7.0.0, 1.7.1.0, 1.7.2.0, and 1.8.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 207320.

Use of a Broken or Risky Cryptographic Algorithm (DES) vulnerability in the Password class in C2SConnections.dll in Milner ImageDirector Capture on Windows allows Encryption Brute Forcing to obtain database credentials.This issue affects ImageDirector Capture: from 7.0.9.0 before 7.6.3.25808.

HCL OneTest Performance V9.5, V10.0, V10.1 uses basic authentication which is relatively weak. An attacker could potentially decode the encoded credentials.

Yealink Config Encrypt Tool add RSA before 1.2 has a built-in RSA key pair, and thus there is a risk of decryption by an adversary.

Weak Encryption Algorithm in StreamPark, The use of an AES cipher in ECB mode and a weak random number generator for encrypting sensitive data, including JWT tokens, may have risked exposing sensitive authentication data This issue affects Apache StreamPark: from 2.0.0 before 2.1.7. Users are recommended to upgrade to version 2.1.7, which fixes the issue.

Vulnerability in the cryptographic algorithm of AndSoft's e-TMS v25.03, which uses MD5 to encrypt passwords. MD5 is a cryptographically vulnerable hash algorithm and is no longer considered secure for storing or transmitting passwords. It is vulnerable to collision attacks and can be easily cracked with modern hardware, exposing user credentials to potential risks.

IBM Spectrum Scale 5.1.5.0 through 5.1.5.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 239080.

A use of a broken or risky cryptographic algorithm [CWE-327] in Fortinet FortiSIEM before 6.7.1 allows a remote unauthenticated attacker to perform brute force attacks on GUI endpoints via taking advantage of outdated hashing methods.

Zoom Client for Meetings through 4.6.9 uses the ECB mode of AES for video and audio encryption. Within a meeting, all participants use a single 128-bit key.

Brocade SANnav before Brocade SANnav 2.2.2 supports key exchange algorithms, which are considered weak on ports 24, 6514, 18023, 19094, and 19095.

IBM WebSphere Application Server 8.5 and 9.0 traditional container uses weaker than expected cryptographic keys that could allow an attacker to decrypt sensitive information. This affects only the containerized version of WebSphere Application Server traditional. IBM X-Force ID: 241045.

IBM Aspera Console 3.4.0 through 3.4.4 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

Cybersecurity Nozomi Networks Labs, a specialized security company focused on Industrial Control Systems (ICS) and OT/IoT security, has discovered a vulnerability in Device Manager that a hardcoded encryption key for sensitive information. An attacker can use key to decrypt sensitive information. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds.

In GLPI before version 9.5.0, the encryption algorithm used is insecure. The security of the data encrypted relies on the password used, if a user sets a weak/predictable password, an attacker could decrypt data. This is fixed in version 9.5.0 by using a more secure encryption library. The library chosen is sodium.

An information disclosure vulnerability exists in the /srvs/membersrv/getCashiers endpoint of the Aptsys gemscms backend platform thru 2025-05-28. This unauthenticated endpoint returns a list of cashier accounts, including names, email addresses, usernames, and passwords hashed using MD5. As MD5 is a broken cryptographic function, the hashes can be easily reversed using public tools, exposing user credentials in plaintext. This allows remote attackers to perform unauthorized logins and potentially gain access to sensitive POS operations or backend functions.

Dell PowerScale OneFS versions 8.2.2.x through 9.7.0.0 contain use of a broken or risky cryptographic algorithm vulnerability. An unprivileged network malicious attacker could potentially exploit this vulnerability, leading to data leaks.

IBM QRadar SIEM 7.3 and 7.4 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 201778.

IBM Tivoli Netcool/Impact 7.1.0.20 and 7.1.0.21 uses an insecure SSH server configuration which enables weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 203556.

HireVue Hiring Platform V1.0 suffers from Use of a Broken or Risky Cryptographic Algorithm. NOTE: this is disputed by the vendor for multiple reasons, e.g., it is inconsistent with CVE ID assignment rules for cloud services, and no product with version V1.0 exists. Furthermore, the rail-fence cipher has been removed, and TLS 1.2 is now used for encryption.

IBM SPSS Statistics 26.0, 27.0.1, 28.0.1, and 29.0.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.3.0.15, LTS2025 release version 8.3.1.0, LTS2024 release versions 7.13.1.0 through 7.13.1.30, LTS 2023 release versions 7.10.1.0 through 7.10.1.60, contain an Use of a Broken or Risky Cryptographic Algorithm vulnerability in the DD boost. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information exposure.