A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 within the asynchronous parsing of local video stream content due to insufficient alignment and validation of buffer boundaries when processing streaming inputs.An attacker on the same network segment could trigger heap memory corruption conditions by sending crafted payloads that cause write operations beyond allocated buffer boundaries. Successful exploitation causes a Denial-of-Service (DoS) condition, causing the device’s process to crash or become unresponsive.
A heap-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 in the HTTP POST body parsing logic due to missing validation of remaining buffer capacity after dynamic allocation, due to insufficient boundary validation when handling externally supplied HTTP input. An attacker on the same network segment could trigger heap memory corruption conditions by sending crafted payloads that cause write operations beyond allocated buffer boundaries. Successful exploitation causes a Denial-of-Service (DoS) condition, causing the device’s process to crash or become unresponsive.
A vulnerability classified as problematic has been found in TP-Link TL-WR740N. Affected is an unknown function of the component ARP Handler. The manipulation leads to resource consumption. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-214812.
The vulnerability exists in the UPnP component of TL-WR841N v14, where improper input validation leads to an out-of-bounds read, potentially causing a crash of the UPnP service. Successful exploitation can cause the UPnP service to crash, resulting in a Denial-of-Service condition. This vulnerability affects TL-WR841N v14 < EN_0.9.1 4.19 Build 260303 Rel.42399n (V14_260303) and < US_0.9.1.4.19 Build 260312 Rel. 49108n (V14_0304).
The HTTPS server on Tapo C200 V3 does not properly validate the Content-Length header, which can lead to an integer overflow. An unauthenticated attacker on the same local network segment can send crafted HTTPS requests to trigger excessive memory allocation, causing the device to crash and resulting in denial-of-service (DoS).
A NULL Pointer Dereference vulnerability in TP-Link Archer BE400 V1(802.11 modules) allows an adjacent attacker to cause a denial-of-service (DoS) by triggering a device reboot. This issue affects Archer BE400: xi 1.1.0 Build 20250710 rel.14914.
A stack-based buffer overflow vulnerability was identified in TP-Link Tapo C520WS v2.6 within a configuration handling component due to insufficient input validation. An attacker can exploit this vulnerability by supplying an excessively long value for a vulnerable configuration parameter, resulting in a stack overflow. Successful exploitation results in Denial-of-Service (DoS) condition, leading to a service crash or device reboot, impacting availability.
A denial-of-service vulnerability was identified in TP-Link Tapo C520WS v2.6 within the HTTP request path parsing logic. The implementation enforces length restrictions on the raw request path but does not account for path expansion performed during normalization. An attacker on the adjacent network may send a crafted HTTP request to cause buffer overflow and memory corruption, leading to system interruption or device reboot.
The Tapo C220 v1 and C520WS v2 cameras’ HTTP service does not safely handle POST requests containing an excessively large Content-Length header. The resulting failed memory allocation triggers a NULL pointer dereference, causing the main service process to crash. An unauthenticated attacker can repeatedly crash the service, causing temporary denial of service. The device restarts automatically, and repeated requests can keep it unavailable.
The HTTP parser of Tapo C220 v1 and C520WS v2 cameras improperly handles requests containing an excessively long URL path. An invalid‑URL error path continues into cleanup code that assumes allocated buffers exist, leading to a crash and service restart. An unauthenticated attacker can force repeated service crashes or device reboots, causing denial of service.
By sending crafted files to the firmware update endpoint of Tapo C220 v1 and C520WS v2, the device terminates core system services before verifying authentication or firmware integrity. An unauthenticated attacker can trigger a persistent denial of service, requiring a manual reboot or application initiated restart to restore normal device operation.
A stack-based buffer overflow vulnerability was identified in the ONVIF SOAP XML Parser in Tapo C200 v3 and C520WS v2.6. When processing XML tags with namespace prefixes, the parser fails to validate the prefix length before copying it to a fixed-size stack buffer. It allowed a crafted SOAP request with an oversized namespace prefix to cause memory corruption in stack. An unauthenticated attacker on the same local network may exploit this flaw to enable remote code execution with elevated privileges, leading to full compromise of the device.
In TP-Link TL-WDR7660 v1.0, the guestRuleJsonToBin function handles the parameter string name without checking it, which can lead to stack overflow vulnerabilities.
In TP-Link TL-WDR7660 1.0, the rtRuleJsonToBin function handles the parameter string name without checking it, which can lead to stack overflow vulnerabilities.
A denial-of-service (DoS) vulnerability was identified in Omada EAP610 v3. An attacker with adjacent network access can send crafted requests to cause the device’s HTTP service to crash. This results in temporary service unavailability until the device is rebooted. This issue affects Omada EAP610 firmware versions prior to 1.6.0.
In TP-Link TL-WDR7660 1.0, the wacWhitelistJsonToBin function handles the parameter string name without checking it, which can lead to stack overflow vulnerabilities.
In TP-Link TL-WDR7660 1.0, the wlanTimerRuleJsonToBin function handles the parameter string name without checking it, which can lead to stack overflow vulnerabilities.
A vulnerability has been found in TP-Link Archer C7v2 v2_en_us_180114 and classified as problematic. Affected by this vulnerability is an unknown functionality of the component GET Request Parameter Handler. The manipulation leads to denial of service. The attack can only be done within the local network. The associated identifier of this vulnerability is VDB-228775. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability classified as critical has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected is an unknown function of the file /control/WANIPConnection of the component SOAP Request Handler. The manipulation of the argument NewConnectionType leads to buffer overflow. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used.
TP-Link USB Network Server TL-PS310U devices before 2.079.000.t0210 allow an attacker on the same network to denial-of-service the device via long input values.
An issue in TP-Link Tapo C100 v1.1.15 Build 211130 Rel.15378n(4555) and before allows attackers to cause a Denial of Service (DoS) via supplying a crafted web request.
A vulnerability was found in TP-Link Archer C50 V2_160801. It has been rated as problematic. Affected by this issue is some unknown functionality of the component Web Management Interface. The manipulation leads to denial of service. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221552.
A Denial-of-Service (DoS) vulnerability in the httpd component of TP-Link's TD-W8961N v4.0 due to improper input sanitization, allows crafted requests to trigger a processing error that causes the httpd service to crash. Successful exploitation may allow the attacker to cause service interruption, resulting in a DoS condition.
TP-Link Omada ER605 Comexe DDNS Response Handling Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. However, devices are vulnerable only if configured to use the Comexe DDNS service. The specific flaw exists within the handling of DNS responses. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22383.
Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing a field whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code. The vulnerability arises from improper validation of a packet field whose offset is used to determine the write location in memory. By crafting a packet with a manipulated field offset, an attacker can redirect writes to arbitrary memory locations.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted set of network packets containing an excessive number of host entries This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing an excessive number of fields with zero‑length values.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tdpserver modules) allows adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing a maliciously formed field.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing an excessive number of fields with zero‑length values.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing a field whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
Heap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c.
BT:Classic: Multiple missing buf length checks
No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c.
BT: Missing length checks of net_buf in rfcomm_handle_data
An integer underflow in the UDP command handler of the TeamViewer DEX Client (former 1E Client) - Content Distribution Service (NomadBranch.exe) prior version 26.1 for Windows allows an adjacent network attacker to trigger a heap-based buffer overflow and cause a denial-of-service (service crash) via specially crafted UDP packets.
BT: HCI: adv_ext_report Improper discarding in adv_ext_report