Incorrect permission assignment vulnerabilities exist in iControl REST and TMOS shell (tmsh) undisclosed command which may allow an authenticated attacker to view sensitive information.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Incorrect permission assignment vulnerabilities exist in BIG-IP and BIG-IQ TMOS Shell (tmsh) arp and ndp commands, and in BIG-IP iControl REST. These vulnerabilities may allow an authenticated attacker to view adjacent network information.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On F5 BIG-IP 15.1.x versions prior to 15.1.5.1 and 14.1.x versions prior to 14.1.4.6, when installing Net HSM, the scripts (nethsm-safenet-install.sh and nethsm-thales-install.sh) expose the Net HSM partition password. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

A vulnerability exists in the undisclosed pages in the Configuration utility that may allow a low-privileged authenticated attacker to access to undisclosed sensitive information.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An authenticated iControl SOAP user may be able to obtain information of other accounts.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

The BIG-IP and BIG-IQ systems do not encrypt some sensitive information written to Database (DB) variables.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An improper sanitization vulnerability exists in the BIG-IP QKView utility that allows a low-privileged attacker to read sensitive information from a QKView file.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

In versions 2.x before 2.3.0 and all versions of 1.x, An attacker authorized to create or update ingress objects can obtain the secrets available to the NGINX Ingress Controller. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, and F5 BIG-IQ Centralized Management all versions of 8.x and 7.x, an authenticated, high-privileged attacker with no bash access may be able to access Certificate and Key files using Secure Copy (SCP) protocol from a remote system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

An authenticated attacker's undisclosed requests to BIG-IP iControl REST can lead to an information leak of BIG-IP local user account names.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability exists in an undisclosed BIG-IP TMOS Shell (tmsh) command that may allow an authenticated attacker with resource administrator or administrator role to execute arbitrary system commands with higher privileges. In Appliance mode deployments, a successful exploit can allow the attacker to cross a security boundary. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On F5 BIG-IP APM 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, as well as F5 BIG-IP APM Clients 7.x versions prior to 7.2.1.5, the BIG-IP Edge Client Component Installer Service does not use best practice while saving temporary files. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

In BIG-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, and all versions of BIG-IQ 8.x and 7.1.x, incorrect permission assignment vulnerabilities exist in the iControl REST and TMOS shell (tmsh) dig command which may allow an authenticated attacker with resource administrator or administrator role privileges to view sensitive information. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

In Splunk Enterprise for Windows versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, a new installation of or an upgrade to an affected version can result in incorrect permissions assignment in the Splunk Enterprise for Windows Installation directory. This lets non-administrator users on the machine access the directory and all its contents.

An Incorrect Permission Assignment vulnerability exists in the ASUS Business System Control Interface driver. This vulnerability can be triggered by an unprivileged local user sending a specially crafted IOCTL request, potentially leading to unauthorized access to sensitive hardware resources and kernel information disclosure. Refer to the "ASUS Business System Control Interface" section on the ASUS Security Advisory for more information.

A vulnerability was recently discovered in the rpc.mountd daemon in the nfs-utils package for Linux, that allows a NFSv3 client to escalate the privileges assigned to it in the /etc/exports file at mount time. In particular, it allows the client to access any subdirectory or subtree of an exported directory, regardless of the set file permissions, and regardless of any 'root_squash' or 'all_squash' attributes that would normally be expected to apply to that client.

The default privileges for the running service Normand Message Buffer in Beckman Coulter Remisol Advance v2.0.12.1 and prior allows non-privileged users to overwrite and manipulate executables and libraries. This allows attackers to access sensitive data.

An information disclosure vulnerability exists when the Microsoft Exchange PowerShell API grants calendar contributors more view permissions than intended, aka "Microsoft Exchange Information Disclosure Vulnerability." This affects Microsoft Exchange Server.

Incorrect Permission Assignment for Critical Resource vulnerability in ABB REX640 PCL1, REX640 PCL2, REX640 PCL3 allows an authenticated attacker to launch an attack against the user database file and try to take control of an affected system node.

Incorrect Permission Assignment for Critical Resource in Packagist microweber/microweber prior to 1.2.11.

PortSwigger Burp Suite Enterprise Edition before 2021.11 on Windows has weak file permissions for the embedded H2 database, which might lead to privilege escalation. This issue can be exploited by an adversary who has already compromised a valid Windows account on the server via separate means. In this scenario, the compromised account may have inherited read access to sensitive configuration, database, and log files.

SiYuan is a personal knowledge management system. Prior to 3.6.1, POST /api/template/renderSprig lacks model.CheckAdminRole, allowing any authenticated user to execute arbitrary SQL queries against the SiYuan workspace database and exfiltrate all note content, metadata, and custom attributes. This vulnerability is fixed in 3.6.1.

A flaw was found in the 'deref' plugin of 389-ds-base where it could use the 'search' permission to display attribute values. In some configurations, this could allow an authenticated attacker to view private attributes, such as password hashes.

When etcupdate encounters conflicts while merging files, it saves a version containing conflict markers in /var/db/etcupdate/conflicts. This version does not preserve the mode of the input file, and is world-readable. This applies to files that would normally have restricted visibility, such as /etc/master.passwd. An unprivileged local user may be able to read encrypted root and user passwords from the temporary master.passwd file created in /var/db/etcupdate/conflicts. This is possible only when conflicts within the password file arise during an update, and the unprotected file is deleted when conflicts are resolved.

A vulnerability exists in the Rockwell Automation ThinManager® ThinServer that allows a threat actor to disclose sensitive information. A threat actor can exploit this vulnerability by abusing the ThinServer™ service to read arbitrary files by creating a junction that points to the target directory.

Tanium addressed an insecure file permissions vulnerability in Enforce Recovery Key Portal.

Liferay Portal 7.3.0 through 7.4.3.119, and Liferay DXP 2023.Q3.1 through 2023.Q3.8, 2023.Q4.0 through 2023.Q4.5, 7.4 GA through update 92 and 7.3 GA though update 36 shows content to users who do not have permission to view it via the Menu Display Widget. This security flaw could result in sensitive information being exposed to unauthorized users.

Gradle is a build tool with a focus on build automation and support for multi-language development. When copying or archiving symlinked files, Gradle resolves them but applies the permissions of the symlink itself instead of the permissions of the linked file to the resulting file. This leads to files having too much permissions given that symlinks usually are world readable and writeable. While it is unlikely this results in a direct vulnerability for the impacted build, it may open up attack vectors depending on where build artifacts end up being copied to or un-archived. In versions 7.6.3, 8.4 and above, Gradle will now properly use the permissions of the file pointed at by the symlink to set permissions of the copied or archived file.

IBM Storage Scale 5.2.3.0 and 5.2.3.1 could allow an authenticated user to obtain sensitive information from files due to the insecure permissions inherited through the SMB protocol.

Metabase Enterprise Edition is the enterprise version of Metabase business intelligence and data analytics software. Starting in version 1.47.0 and prior to versions 1.50.36, 1.51.14, 1.52.11, and 1.53.2 of Metabase Enterprise Edition, users with impersonation permissions may be able to see results of cached questions, even if their permissions don’t allow them to see the data. If some user runs a question which gets cached, and then an impersonated user runs that question, then the impersonated user sees the same results as the previous user. These cached results may include data the impersonated user should not have access to. This vulnerability only impacts the Enterprise Edition of Metabase and not the Open Source Edition. Versions 1.53.2, 1.52.11, 1.51.14, and 1.50.36 contains a patch. Versions on the 1.49.X, 1.48.X, and 1.47.X branches are vulnerable but do not have a patch available, so users should upgrade to a major version with an available fix. Disabling question caching is a workaround for this issue.

DataEase is an open source data visualization analysis tool to analyze data and gain insight into business trends. Affected versions of DataEase has a privilege bypass vulnerability where ordinary users can gain access to the user database. Exposed information includes md5 hashes of passwords, username, email, and phone number. The vulnerability has been fixed in v1.18.8. Users are advised to upgrade. There are no known workarounds for the vulnerability.

Jenkins AWS CodeCommit Trigger Plugin 3.0.12 and earlier does not restrict the AWS SQS queue name path parameter in an HTTP endpoint, allowing attackers with Item/Read permission to obtain the contents of arbitrary files on the Jenkins controller file system.

Apache Airflow versions 3.0.0 through 3.1.7 FastAPI DagVersion listing API does not apply per-DAG authorization filtering when the request is made with dag_id set to "~" (wildcard for all DAGs). As a result, version metadata of DAGs that the requester is not authorized to access is returned. Users are recommended to upgrade to Apache Airflow 3.1.8 or later, which resolves this issue.

CubeFS through 3.2.1 allows Kubernetes cluster-level privilege escalation. This occurs because DaemonSet has cfs-csi-cluster-role and can thus list all secrets, including the admin secret.

In Splunk Universal Forwarder for Windows versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, a new installation of or an upgrade to an affected version can result in incorrect permissions assignment in the Universal Forwarder for Windows Installation directory. This lets non-administrator users on the machine access the directory and all its contents.

Insecure Permissions vulnerability found in OpenGoofy Hippo4j v.1.4.3 allows attacker toescalate privileges via the AddUser method of the UserController function in Tenant Management module.

Insecure Permissions vulnerability found in OpenGoofy Hippo4j v.1.4.3 allows attacker to obtain sensitive information via the ConfigVerifyController function of the Tenant Management module.

GLPI is a Free Asset and IT Management Software package. Versions prior to 9.5.12 and 10.0.6 are vulnerable to Improper Privilege Management. Any user having access to the standard interface can export data of almost any GLPI item type, even those on which user is not allowed to access (including assets, tickets, users, ...). This issue is patched in 10.0.6.

Insecure permissions in Aginode GigaSwitch v5 allows attackers to access sensitive information via using the SCP command.

GLPI is a free Asset and IT management software package. In versions prior to 9.5.6, the cookie used to store the autologin cookie (when a user uses the "remember me" feature) is accessible by scripts. A malicious plugin that could steal this cookie would be able to use it to autologin. This issue is fixed in version 9.5.6. As a workaround, one may avoid using the "remember me" feature.

A flaw was found in argocd. Any unprivileged user is able to deploy argocd in their namespace and with the created ServiceAccount argocd-argocd-server, the unprivileged user is able to read all resources of the cluster including all secrets which might enable privilege escalations. The highest threat from this vulnerability is to data confidentiality.

It was discovered that Canonical's Pebble service manager read-file API and the associated pebble pull command, before v1.10.2, allowed unprivileged local users to read files with root-equivalent permissions when Pebble was running as root. Fixes are also available as backports to v1.1.1, v1.4.2, and v1.7.4.

Incorrect permission assignment for critical resource in some Intel(R) QAT drivers for Windows before version 1.9.0 may allow an authenticated user to potentially enable information disclosure via local access.

On version 2.x before 2.0.3 and 1.x before 1.12.3, the command line restriction that controls snippet use with NGINX Ingress Controller does not apply to Ingress objects. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Elasticsearch before 7.14.0 did not apply document and field level security to searchable snapshots. This could lead to an authenticated user gaining access to information that they are unauthorized to view.

Incorrect permission assignment for critical resource vulnerability in QSAN Storage Manager allows authenticated remote attackers to access arbitrary password files. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0 HF0). Affected devices do not properly assign permissions to critical ressources. This could allow a non-privileged local attacker to access sensitive information stored on the device.

Incorrect Permission Assignment for Critical Resource vulnerability in Tridium Niagara Framework on Windows, Tridium Niagara Enterprise Security on Windows allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects Niagara Framework: before 4.14.2, before 4.15.1, before 4.10.11; Niagara Enterprise Security: before 4.14.2, before 4.15.1, before 4.10.11. Tridium recommends upgrading to Niagara Framework and Enterprise Security versions 4.14.2u2, 4.15.u1, or 4.10u.11.

Due to improper validation, SAP BusinessObject Business Intelligence Launch Pad allows an authenticated attacker to access operating system information using crafted document. On successful exploitation there could be a considerable impact on confidentiality of the application.

Brocade SANnav versions before v2.3.0a do not correctly set permissions on files, including docker files. An unprivileged attacker who gains access to the server can read sensitive information from these files.