TRENDnet TEW-814DAP v1_(FW1.01B01) was discovered to contain a stack overflow vulnerability via the submit-url parameter at /formSysLog .

A flaw has been found in Tenda W3 1.0.0.3(2204). This issue affects some unknown processing of the file /goform/wifiSSIDset of the component POST Parameter Handler. Executing a manipulation of the argument index/GO can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used.

EHG2408 series switch developed by Atop Technologies has a Stack-based Buffer Overflow vulnerability, allowing unauthenticated remote attackers to control the program's execution flow and execute arbitrary code.

A vulnerability was found in Tenda AC8 16.03.34.06 and classified as critical. This issue affects the function sub_49E098 of the file /goform/SetIpMacBind of the component Parameter Handler. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in Tenda FH1202 1.2.0.14(408). The impacted element is the function fromNatStaticSetting of the file /goform/NatSaticSetting. Executing a manipulation of the argument page can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability was identified in Tenda i3 1.0.0.6(2204). This affects the function formWifiMacFilterGet of the file /goform/WifiMacFilterGet. The manipulation of the argument index leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

A flaw has been found in Tenda i3 1.0.0.6(2204). This impacts the function formSetCfm of the file /goform/setcfm. This manipulation of the argument funcpara1 causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A flaw has been found in Tenda i3 1.0.0.6(2204). Affected is the function formwrlSSIDget of the file /goform/wifiSSIDget. Executing a manipulation of the argument index can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability was found in Tenda AC18 15.03.05.05. It has been rated as critical. This issue affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg. The manipulation of the argument startIP leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-256895. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Tenda AC7 up to 15.03.06.44. This affects the function formSetFirewallCfg of the file /goform/SetFirewallCfg. The manipulation of the argument firewallEn leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in Tenda M3 1.0.0.13(4903). This affects the function formSetRemoteVlanInfo of the file /goform/setVlanInfo. Executing a manipulation of the argument ID/vlan/port can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

A security vulnerability has been detected in Tenda F453 1.0.0.3. This affects the function strcpy of the file /goform/exeCommand. The manipulation of the argument cmdinput leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

A flaw has been found in Tenda FH1201 and FH1206 1.2.0.14(408)/1.2.0.8(8155). This impacts the function strcat of the file /goform/webtypelibrary of the component HTTP Request Handler. This manipulation of the argument webSiteId causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used.

A vulnerability was found in Wavlink WL-WN579X3-C 231124. This affects the function sub_40139C of the file /cgi-bin/firewall.cgi. Performing a manipulation of the argument del_flag results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Upgrading to version 20260226 is able to mitigate this issue. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.

A vulnerability was found in Tenda F453 1.0.0.3. This vulnerability affects the function sub_3C6C0 of the file /goform/QuickIndex. The manipulation of the argument mit_linktype/PPPOEPassword results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability was found in Tenda FH451 1.0.0.9. This impacts the function fromSetCfm of the file /goform/setcfm. The manipulation of the argument funcname/funcpara1 results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used.

A vulnerability was determined in Tenda FH451 1.0.0.9. Affected is the function sub_3C434 of the file /goform/AdvSetWan. This manipulation of the argument wanmode/PPPOEPassword causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

A flaw has been found in Tenda M3 1.0.0.13(4903). The affected element is the function formSetRemoteDhcpForAp of the file /goform/setDhcpAP. This manipulation of the argument startip/endip/leasetime/gateway/dns1/dns2 causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used.

A vulnerability has been found in Tenda FH1201 1.2.0.14(408). Affected is the function sprintf of the file /goform/SetIpBind. Such manipulation of the argument page leads to stack-based buffer overflow. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Tenda AC18 15.03.05.05. This affects the function sprintf of the file /goform/SetDlnaCfg of the component HTTP Request Handler. The manipulation of the argument scanList results in stack-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used.

A vulnerability was determined in Tenda F453 1.0.0.3/1.If. This issue affects the function fromSetCfm of the file /goform/setcfm. This manipulation of the argument funcname/funcpara1 causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.

TRENDnet TEW-814DAP v1_(FW1.01B01) was discovered to contain a stack overflow via the submit-url parameter at /formNewSchedule

A vulnerability was identified in Tenda F453 1.0.0.3/3.As. Impacted is the function fromPptpUserAdd of the file /goform/PPTPDClient. Such manipulation of the argument username/opttype leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used.

TRENDnet TEW-814DAP v1_(FW1.01B01) was discovered to contain a stack overflow vulnerability via the submit-url parameter at /formPasswordAuth .

A vulnerability, which was classified as critical, has been found in D-Link DAP-1320 1.00. Affected by this issue is the function replace_special_char of the file /storagein.pd-XXXXXX. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in Tenda O3 1.0.0.10(2478). Affected by this vulnerability is the function SetValue/GetValue of the file /goform/AdvSetLanip. The manipulation of the argument lanIp leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

A vulnerability has been found in Tenda M3 1.0.0.13(4903). The impacted element is an unknown function of the file /goform/exeCommand. Such manipulation of the argument cmdinput leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Tenda AC15 up to 15.13.07.13. Affected by this issue is some unknown functionality of the file /goform/TextEditingConversion. The manipulation of the argument wpapsk_crypto2_4g results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

A security flaw has been discovered in D-Link DWR-M920 up to 1.1.50. Impacted is the function sub_42261C of the file /boafrm/formFilter. The manipulation of the argument ip6addr results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited.

A vulnerability was identified in Tenda M3 1.0.0.13(4903). This vulnerability affects the function formSetAdPushInfo of the file /goform/setAdPushInfo. The manipulation of the argument mac/terminal leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

TrendNet Wireless AC Easy-Upgrader TEW-820AP v1.0R, firmware version 1.01.B01 was discovered to contain a stack overflow via the submit-url parameter at /formNewSchedule. This vulnerability allows attackers to execute arbitrary code via a crafted payload. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

A security vulnerability has been detected in Tenda AC18 15.03.05.05. The impacted element is the function strcpy of the file /goform/GetParentControlInfo of the component HTTP Request Handler. The manipulation of the argument mac leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

A security flaw has been discovered in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function RE2000v2Repeater_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

SD-330AC and AMC Manager provided by silex technology, Inc. contain a stack-based buffer overflow vulnerability in processing the redirect URLs. Arbitrary code may be executed on the device.

A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function AP_get_wireless_clientlist_setClientsName of the file mod_form.so. Performing manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function AP_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Tenda AC20 16.03.08.12. The affected element is the function formSetPPTPUserList of the file /goform/setPptpUserList of the component httpd. Such manipulation of the argument list leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used.

A vulnerability was determined in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function RE2000v2Repeater_get_wireless_clientlist_setClientsName of the file mod_form.so. Executing manipulation of the argument clientsname_0 can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Tenda AC20 16.03.08.12. The impacted element is the function formSetRebootTimer of the file /goform/SetSysAutoRebbotCfg of the component httpd. Performing a manipulation of the argument rebootTime results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability has been found in D-Link DIR-816L 2_06_b09_beta. This affects the function genacgi_main of the file gena.cgi. The manipulation of the argument SERVER_ID/HTTP_SID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Tenda AC21 16.03.08.16. This vulnerability affects unknown code of the file /goform/SetSysTimeCfg. The manipulation of the argument timeZone/time leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in Tenda AC21 16.03.08.16. This affects an unknown part of the file /goform/SetIpMacBind. Executing a manipulation of the argument list can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been published and may be used.

A vulnerability classified as critical has been found in TOTOLINK X18 9.1.0cu.2024_B20220329. Affected is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi. The manipulation as part of String leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DIR-816L 2_06_b09_beta. This vulnerability affects the function scandir_main of the file /portal/__ajax_exporer.sgi. The manipulation of the argument en results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in D-Link DIR-816L 2_06_b09_beta. This issue affects the function soapcgi_main of the file /soap.cgi. This manipulation causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in TOTOLINK A3300R 17.0.0cu.557_B20221024. The impacted element is the function setSyslogCfg of the file /cgi-bin/cstecgi.cgi of the component POST Parameter Handler. Such manipulation of the argument enable leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Tenda O3 1.0.0.10(2478). Affected by this issue is the function SetValue/GetValue of the file /goform/setDmzInfo. The manipulation of the argument dmzIP results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A weakness has been identified in Tenda HG9 300001138. Affected by this vulnerability is an unknown functionality of the file /boaform/formgponConf of the component GPON Configuration Endpoint. This manipulation of the argument fmgpon_loid/fmgpon_loid_password causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks.

A flaw has been found in TOTOLINK A3300R 17.0.0cu.557_B20221024. The affected element is the function setScheduleCfg of the file /cgi-bin/cstecgi.cgi of the component POST Parameter Handler. This manipulation of the argument recHour causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used.

A weakness has been identified in Tenda O3 1.0.0.10(2478). This affects the function SetValue/GetValue of the file /goform/setNetworkService. This manipulation of the argument upnpEn causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.