In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject oversized global TT response buffers batadv_tt_prepare_tvlv_global_data() builds the allocation length for a global TT response in 16-bit temporaries. When a remote originator advertises a large enough global TT, the TT payload length plus the VLAN header offset can exceed 65535 and wrap before kmalloc(). The full-table response path still uses the original TT payload length when it fills tt_change, so the wrapped allocation is too small and batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object before the later packet-size check runs. Fix this by rejecting TT responses whose TVLV value length cannot fit in the 16-bit TVLV payload length field.

In the Linux kernel, the following vulnerability has been resolved: usbip: validate number_of_packets in usbip_pack_ret_submit() When a USB/IP client receives a RET_SUBMIT response, usbip_pack_ret_submit() unconditionally overwrites urb->number_of_packets from the network PDU. This value is subsequently used as the loop bound in usbip_recv_iso() and usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible array whose size was fixed at URB allocation time based on the *original* number_of_packets from the CMD_SUBMIT. A malicious USB/IP server can set number_of_packets in the response to a value larger than what was originally submitted, causing a heap out-of-bounds write when usbip_recv_iso() writes to urb->iso_frame_desc[i] beyond the allocated region. KASAN confirmed this with kernel 7.0.0-rc5: BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640 Write of size 4 at addr ffff888106351d40 by task vhci_rx/69 The buggy address is located 0 bytes to the right of allocated 320-byte region [ffff888106351c00, ffff888106351d40) The server side (stub_rx.c) and gadget side (vudc_rx.c) already validate number_of_packets in the CMD_SUBMIT path since commits c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input"). The server side validates against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point. On the client side we have the original URB, so we can use the tighter bound: the response must not exceed the original number_of_packets. This mirrors the existing validation of actual_length against transfer_buffer_length in usbip_recv_xbuff(), which checks the response value against the original allocation size. Kelvin Mbogo's series ("usb: usbip: fix integer overflow in usbip_recv_iso()", v2) hardens the receive-side functions themselves; this patch complements that work by catching the bad value at its source -- in usbip_pack_ret_submit() before the overwrite -- and using the tighter per-URB allocation bound rather than the global USBIP_MAX_ISO_PACKETS limit. Fix this by checking rpdu->number_of_packets against urb->number_of_packets in usbip_pack_ret_submit() before the overwrite. On violation, clamp to zero so that usbip_recv_iso() and usbip_pad_iso() safely return early.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix slab-use-after-free in __inet_lookup_established The ehash table lookups are lockless and rely on SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability during RCU read-side critical sections. Both tcp_prot and tcpv6_prot have their slab caches created with this flag via proto_register(). However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into tcpv6_prot_override during inet_init() (fs_initcall, level 5), before inet6_init() (module_init/device_initcall, level 6) has called proto_register(&tcpv6_prot). At that point, tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab remains NULL permanently. This causes MPTCP v6 subflow child sockets to be allocated via kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so when these sockets are freed without SOCK_RCU_FREE (which is cleared for child sockets by design), the memory can be immediately reused. Concurrent ehash lookups under rcu_read_lock can then access freed memory, triggering a slab-use-after-free in __inet_lookup_established. Fix this by splitting the IPv6-specific initialization out of mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called from mptcp_proto_v6_init() before protocol registration. This ensures tcpv6_prot_override.slab correctly inherits the SLAB_TYPESAFE_BY_RCU slab cache.

In the Linux kernel, the following vulnerability has been resolved: net/tls: fix use-after-free in -EBUSY error path of tls_do_encryption The -EBUSY handling in tls_do_encryption(), introduced by commit 859054147318 ("net: tls: handle backlogging of crypto requests"), has a use-after-free due to double cleanup of encrypt_pending and the scatterlist entry. When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to the cryptd backlog and the async callback tls_encrypt_done() will be invoked upon completion. That callback unconditionally restores the scatterlist entry (sge->offset, sge->length) and decrements ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an error, the synchronous error path in tls_do_encryption() performs the same cleanup again, double-decrementing encrypt_pending and double-restoring the scatterlist. The double-decrement corrupts the encrypt_pending sentinel (initialized to 1), making tls_encrypt_async_wait() permanently skip the wait for pending async callbacks. A subsequent sendmsg can then free the tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still pending, resulting in a use-after-free when the callback fires on the freed record. Fix this by skipping the synchronous cleanup when the -EBUSY async wait returns an error, since the callback has already handled encrypt_pending and sge restoration.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix heap overflow in NFSv4.0 LOCK replay cache The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use expect->helper Use expect->helper in ctnetlink and /proc to dump the helper name. Using nfct_help() without holding a reference to the master conntrack is unsafe. Use exp->master->helper in ctnetlink path if userspace does not provide an explicit helper when creating an expectation to retain the existing behaviour. The ctnetlink expectation path holds the reference on the master conntrack and nf_conntrack_expect lock and the nfnetlink glue path refers to the master ct that is attached to the skb.

In the Linux kernel, the following vulnerability has been resolved: smb: server: let send_done handle a completion without IB_SEND_SIGNALED With smbdirect_send_batch processing we likely have requests without IB_SEND_SIGNALED, which will be destroyed in the final request that has IB_SEND_SIGNALED set. If the connection is broken all requests are signaled even without explicit IB_SEND_SIGNALED.

In the Linux kernel, the following vulnerability has been resolved: media: dvb-net: fix OOB access in ULE extension header tables The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables in handle_one_ule_extension() are declared with 255 elements (valid indices 0-254), but the index htype is derived from network-controlled data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When htype equals 255, an out-of-bounds read occurs on the function pointer table, and the OOB value may be called as a function pointer. Add a bounds check on htype against the array size before either table is accessed. Out-of-range values now cause the SNDU to be discarded.

In the Linux kernel, the following vulnerability has been resolved: iomap: fix invalid folio access when i_blkbits differs from I/O granularity Commit aa35dd5cbc06 ("iomap: fix invalid folio access after folio_end_read()") partially addressed invalid folio access for folios without an ifs attached, but it did not handle the case where 1 << inode->i_blkbits matches the folio size but is different from the granularity used for the IO, which means IO can be submitted for less than the full folio for the !ifs case. In this case, the condition: if (*bytes_submitted == folio_len) ctx->cur_folio = NULL; in iomap_read_folio_iter() will not invalidate ctx->cur_folio, and iomap_read_end() will still be called on the folio even though the IO helper owns it and will finish the read on it. Fix this by unconditionally invalidating ctx->cur_folio for the !ifs case.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc() At the end of this function, d is the traversal cursor of flist, but the code completes found instead. This can lead to issues such as NULL pointer dereferences, double completion, or descriptor leaks. Fix this by completing d instead of found in the final list_for_each_entry_safe() loop.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len() After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"), response buffer management was changed to use dynamic iov array. In the new design, smb2_calc_max_out_buf_len() expects the second argument (hdr2_len) to be the offset of ->Buffer field in the response structure, not a hardcoded magic number. Fix the remaining call sites to use the correct offsetof() value.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of share_conf in compound request smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state == TREE_CONNECTED on the initial lookup path, but the compound reuse path bypasses this check entirely. If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(), subsequent commands dereference the freed share_conf through work->tcon->share_conf. KASAN report: [ 4.144653] ================================================================== [ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70 [ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44 [ 4.145772] [ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY [ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work [ 4.145888] Call Trace: [ 4.145892] <TASK> [ 4.145894] dump_stack_lvl+0x64/0x80 [ 4.145910] print_report+0xce/0x660 [ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 4.145928] ? smb2_write+0xc74/0xe70 [ 4.145931] kasan_report+0xce/0x100 [ 4.145934] ? smb2_write+0xc74/0xe70 [ 4.145937] smb2_write+0xc74/0xe70 [ 4.145939] ? __pfx_smb2_write+0x10/0x10 [ 4.145942] ? _raw_spin_unlock+0xe/0x30 [ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 4.145948] ? smb2_tree_disconnect+0x31c/0x480 [ 4.145951] handle_ksmbd_work+0x40f/0x1080 [ 4.145953] process_one_work+0x5fa/0xef0 [ 4.145962] ? assign_work+0x122/0x3e0 [ 4.145964] worker_thread+0x54b/0xf70 [ 4.145967] ? __pfx_worker_thread+0x10/0x10 [ 4.145970] kthread+0x346/0x470 [ 4.145976] ? recalc_sigpending+0x19b/0x230 [ 4.145980] ? __pfx_kthread+0x10/0x10 [ 4.145984] ret_from_fork+0x4fb/0x6c0 [ 4.145992] ? __pfx_ret_from_fork+0x10/0x10 [ 4.145995] ? __switch_to+0x36c/0xbe0 [ 4.145999] ? __pfx_kthread+0x10/0x10 [ 4.146003] ret_from_fork_asm+0x1a/0x30 [ 4.146013] </TASK> [ 4.146014] [ 4.149858] Allocated by task 44: [ 4.149953] kasan_save_stack+0x33/0x60 [ 4.150061] kasan_save_track+0x14/0x30 [ 4.150169] __kasan_kmalloc+0x8f/0xa0 [ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0 [ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600 [ 4.150529] smb2_tree_connect+0x2e6/0x1000 [ 4.150645] handle_ksmbd_work+0x40f/0x1080 [ 4.150761] process_one_work+0x5fa/0xef0 [ 4.150873] worker_thread+0x54b/0xf70 [ 4.150978] kthread+0x346/0x470 [ 4.151071] ret_from_fork+0x4fb/0x6c0 [ 4.151176] ret_from_fork_asm+0x1a/0x30 [ 4.151286] [ 4.151332] Freed by task 44: [ 4.151418] kasan_save_stack+0x33/0x60 [ 4.151526] kasan_save_track+0x14/0x30 [ 4.151634] kasan_save_free_info+0x3b/0x60 [ 4.151751] __kasan_slab_free+0x43/0x70 [ 4.151861] kfree+0x1ca/0x430 [ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190 [ 4.152088] smb2_tree_disconnect+0x1cd/0x480 [ 4.152211] handle_ksmbd_work+0x40f/0x1080 [ 4.152326] process_one_work+0x5fa/0xef0 [ 4.152438] worker_thread+0x54b/0xf70 [ 4.152545] kthread+0x346/0x470 [ 4.152638] ret_from_fork+0x4fb/0x6c0 [ 4.152743] ret_from_fork_asm+0x1a/0x30 [ 4.152853] [ 4.152900] The buggy address belongs to the object at ffff88810430c180 [ 4.152900] which belongs to the cache kmalloc-96 of size 96 [ 4.153226] The buggy address is located 20 bytes inside of [ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0) [ 4.153549] [ 4.153596] The buggy address belongs to the physical page: [ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c [ 4.154000] flags: 0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tls: Fix race condition in tls_sw_cancel_work_tx() This issue was discovered during a code audit. After cancel_delayed_work_sync() is called from tls_sk_proto_close(), tx_work_handler() can still be scheduled from paths such as the Delayed ACK handler or ksoftirqd. As a result, the tx_work_handler() worker may dereference a freed TLS object. The following is a simple race scenario: cpu0 cpu1 tls_sk_proto_close() tls_sw_cancel_work_tx() tls_write_space() tls_sw_write_space() if (!test_and_set_bit(BIT_TX_SCHEDULED, &tx_ctx->tx_bitmask)) set_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask); cancel_delayed_work_sync(&ctx->tx_work.work); schedule_delayed_work(&tx_ctx->tx_work.work, 0); To prevent this race condition, cancel_delayed_work_sync() is replaced with disable_delayed_work_sync().

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU length or offset exceeds sg_cnt and then use bogus sg->length/offset values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining entries, and sg->length/offset before building the bvec.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix NULL dereference and UAF in smc_tcp_syn_recv_sock() Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1]. smc_tcp_syn_recv_sock() is called in the TCP receive path (softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP listening socket). It reads sk_user_data to get the smc_sock pointer. However, when the SMC listen socket is being closed concurrently, smc_close_active() sets clcsock->sk_user_data to NULL under sk_callback_lock, and then the smc_sock itself can be freed via sock_put() in smc_release(). This leads to two issues: 1) NULL pointer dereference: sk_user_data is NULL when accessed. 2) Use-after-free: sk_user_data is read as non-NULL, but the smc_sock is freed before its fields (e.g., queued_smc_hs, ori_af_ops) are accessed. The race window looks like this (the syzkaller crash [1] triggers via the SYN cookie path: tcp_get_cookie_sock() -> smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path has the same race): CPU A (softirq) CPU B (process ctx) tcp_v4_rcv() TCP_NEW_SYN_RECV: sk = req->rsk_listener sock_hold(sk) /* No lock on listener */ smc_close_active(): write_lock_bh(cb_lock) sk_user_data = NULL write_unlock_bh(cb_lock) ... smc_clcsock_release() sock_put(smc->sk) x2 -> smc_sock freed! tcp_check_req() smc_tcp_syn_recv_sock(): smc = user_data(sk) -> NULL or dangling smc->queued_smc_hs -> crash! Note that the clcsock and smc_sock are two independent objects with separate refcounts. TCP stack holds a reference on the clcsock, which keeps it alive, but this does NOT prevent the smc_sock from being freed. Fix this by using RCU and refcount_inc_not_zero() to safely access smc_sock. Since smc_tcp_syn_recv_sock() is called in the TCP three-way handshake path, taking read_lock_bh on sk_callback_lock is too heavy and would not survive a SYN flood attack. Using rcu_read_lock() is much more lightweight. - Set SOCK_RCU_FREE on the SMC listen socket so that smc_sock freeing is deferred until after the RCU grace period. This guarantees the memory is still valid when accessed inside rcu_read_lock(). - Use rcu_read_lock() to protect reading sk_user_data. - Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the smc_sock. If the refcount has already reached zero (close path completed), it returns false and we bail out safely. Note: smc_hs_congested() has a similar lockless read of sk_user_data without rcu_read_lock(), but it only checks for NULL and accesses the global smc_hs_wq, never dereferencing any smc_sock field, so it is not affected. Reproducer was verified with mdelay injection and smc_run, the issue no longer occurs with this patch applied. [1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9

In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in handle_auth_done() Perform an explicit bounds check on payload_len to avoid a possible out-of-bounds access in the callout. [ idryomov: changelog ]

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix server re-repick on subrequest retry When a subrequest is marked for needing retry, netfs will call cifs_prepare_write() which will make cifs repick the server for the op before renegotiating credits; it then calls cifs_issue_write() which invokes smb2_async_writev() - which re-repicks the server. If a different server is then selected, this causes the increment of server->in_flight to happen against one record and the decrement to happen against another, leading to misaccounting. Fix this by just removing the repick code in smb2_async_writev(). As this is only called from netfslib-driven code, cifs_prepare_write() should always have been called first, and so server should never be NULL and the preparatory step is repeated in the event that we do a retry. The problem manifests as a warning looking something like: WARNING: CPU: 4 PID: 72896 at fs/smb/client/smb2ops.c:97 smb2_add_credits+0x3f0/0x9e0 [cifs] ... RIP: 0010:smb2_add_credits+0x3f0/0x9e0 [cifs] ... smb2_writev_callback+0x334/0x560 [cifs] cifs_demultiplex_thread+0x77a/0x11b0 [cifs] kthread+0x187/0x1d0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 Which may be triggered by a number of different xfstests running against an Azure server in multichannel mode. generic/249 seems the most repeatable, but generic/215, generic/249 and generic/308 may also show it.

In the Linux kernel, the following vulnerability has been resolved: clk: bcm: dvp: Assign ->num before accessing ->hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in clk_dvp_probe() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2 index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning.

In the Linux kernel, the following vulnerability has been resolved: of: module: add buffer overflow check in of_modalias() In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char).

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Use variable length array instead of fixed size Should fix smatch warning: ntfs_set_label() error: __builtin_memcpy() 'uni->name' too small (20 vs 256)

In the Linux kernel, the following vulnerability has been resolved: keys: Fix overwrite of key expiration on instantiation The expiry time of a key is unconditionally overwritten during instantiation, defaulting to turn it permanent. This causes a problem for DNS resolution as the expiration set by user-space is overwritten to TIME64_MAX, disabling further DNS updates. Fix this by restoring the condition that key_set_expiry is only called when the pre-parser sets a specific expiry.

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: destroy cm id before destroy qp to avoid use after free We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use after free. In RDMA connection establishment error flow, don't destroy qp in cm event handler.Just report cm_error to upper level, qp will be destroy in nvme_rdma_alloc_queue() after destroy cm id.