A vulnerability was determined in NASA cFS up to 7.0.0. This impacts the function CFE_SB_TransmitMsg of the file cfe_sb_priv.c of the component CCSDS Header Size Handler. Executing a manipulation can lead to memory corruption. The project was informed of the problem early through an issue report but has not responded yet.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, the convert_hexstring_to_byte_array() function in the MariaDB SA interface writes decoded bytes into a caller-provided buffer without any capacity check. When importing SA fields from the database (e.g., IV, ARSN, ABM), a malformed or oversized hex string in the database can overflow the destination buffer, corrupting adjacent heap memory. This issue has been patched in version 1.4.3.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. In versions 1.3.3 and prior, an unsigned integer underflow in the `Crypto_TC_ProcessSecurity` function of CryptoLib leads to a heap buffer overflow. The vulnerability is triggered when the `fl` (frame length) field in a Telecommand (TC) packet is set to 0. This underflow causes the frame length to be interpreted as 65535, resulting in out-of-bounds memory access. This critical vulnerability can be exploited to cause a denial of service (DoS) or potentially achieve remote code execution. Users of CryptoLib are advised to apply the recommended patch or avoid processing untrusted TC packets until a fix is available.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, CryptoLib’s KMC crypto service integration is vulnerable to a heap buffer overflow when decoding Base64-encoded ciphertext/cleartext fields returned by the KMC service. The decode destination buffer is sized using an expected output length (len_data_out), but the Base64 decoder writes output based on the actual Base64 input length and does not enforce any destination size limit. An oversized Base64 string in the KMC JSON response can cause out-of-bounds writes on the heap, resulting in process crash and potentially code execution under certain conditions. This issue has been patched in version 1.4.3.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. A heap buffer overflow vulnerability exists in NASA CryptoLib version 1.4.0 and prior in the IV setup logic for telecommand frames. The problem arises from missing bounds checks when copying the Initialization Vector (IV) into a freshly allocated buffer. An attacker can supply a crafted TC frame that causes the library to write one byte past the end of the heap buffer, leading to heap corruption and undefined behaviour. An attacker supplying a malformed telecommand frame can corrupt heap memory. This leads to undefined behaviour, which could manifest itself as a crash (denial of service) or more severe exploitation. This issue has been patched in version 1.4.0.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. A critical heap buffer overflow vulnerability was identified in the `Crypto_AOS_ProcessSecurity` function of CryptoLib versions 1.3.3 and prior. This vulnerability allows an attacker to trigger a Denial of Service (DoS) or potentially execute arbitrary code (RCE) by providing a maliciously crafted AOS frame with an insufficient length. The vulnerability lies in the function `Crypto_AOS_ProcessSecurity`, specifically during the processing of the Frame Error Control Field (FECF). The affected code attempts to read from the `p_ingest` buffer at indices `current_managed_parameters_struct.max_frame_size - 2` and `current_managed_parameters_struct.max_frame_size - 1` without verifying if `len_ingest` is sufficiently large. This leads to a heap buffer overflow when `len_ingest` is smaller than `max_frame_size`. As of time of publication, no known patched versions exist.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. In versions 1.3.3 and prior, a Heap Overflow vulnerability occurs in the `Crypto_TM_ProcessSecurity` function (`crypto_tm.c:1735:8`). When processing the Secondary Header Length of a TM protocol packet, if the Secondary Header Length exceeds the packet's total length, a heap overflow is triggered during the memcpy operation that copies packet data into the dynamically allocated buffer `p_new_dec_frame`. This allows an attacker to overwrite adjacent heap memory, potentially leading to arbitrary code execution or system instability. A patch is available at commit 810fd66d592c883125272fef123c3240db2f170f.

NASA CFITSIO prior to 3.43 is affected by: Buffer Overflow. The impact is: arbitrary code execution. The component is: over 40 source code files were changed. The attack vector is: remote unauthenticated attacker. The fixed version is: 3.43. NOTE: this CVE refers to the issues not covered by CVE-2018-3846, CVE-2018-3847, CVE-2018-3848, and CVE-2018-3849. One example is ftp_status in drvrnet.c mishandling a long string beginning with a '4' character.

A buffer overflow vulnerability has been identified in the Internet Printing Protocol (IPP) in various Lexmark devices. The vulnerability can be leveraged by an attacker to execute arbitrary code.

A vulnerability was identified in D-Link DIR-825 3.00b32. This affects the function NMBD_process of the file sserver.c of the component nmbd. Such manipulation leads to buffer overflow. The attack can only be initiated within the local network. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

EDK2's Network Package is susceptible to a buffer overflow vulnerability when handling Server ID option from a DHCPv6 proxy Advertise message. This vulnerability can be exploited by an attacker to gain unauthorized access and potentially lead to a loss of Confidentiality, Integrity and/or Availability.

EDK2's Network Package is susceptible to a buffer overflow vulnerability via a long server ID option in DHCPv6 client. This vulnerability can be exploited by an attacker to gain unauthorized access and potentially lead to a loss of Confidentiality, Integrity and/or Availability.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain a stack overflow via the mac parameter in the GetParentControlInfo function.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain a stack overflow via the deviceId parameter in the addWifiMacFilter function.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain multiple stack overflows in the formSetMacFilterCfg function via the macFilterType and deviceList parameters.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain a stack overflow via the domain parameter in the add_white_node function.

usb device bluetooth class includes a buffer overflow related to implementation of net_buf_add_mem.

D-Link DIR-3040 HTTP Request Processing Referer Heap-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-3040 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prog.cgi binary, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21671.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Losant Arduino MQTT Client prior to V2.7. User interaction is not required to exploit this vulnerability. The specific flaw exists within the parsing of MQTT PUBLISH packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-6436.

Windows Miracast Wireless Display Remote Code Execution Vulnerability

Buffer overflow in usb device class. Zephyr versions >= v2.6.0 contain Heap-based Buffer Overflow (CWE-122). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-fm6v-8625-99jf

AMI’s SPx contains a vulnerability in the BMC where an Attacker may cause a heap memory corruption via an adjacent network. A successful exploitation of this vulnerability may lead to a loss of confidentiality, integrity, and/or availability.

Heap-based buffer overflow in the UPnP IGD (Internet Gateway Device Standardized Device Control Protocol) implementation in mDNSResponder on Apple Mac OS X 10.4.10 before 20070731 allows network-adjacent remote attackers to execute arbitrary code via a crafted packet.

A vulnerability was found in Tenda W3 1.0.0.3(2204). Affected by this issue is the function formSetCfm of the file /goform/setcfm of the component HTTP Handler. The manipulation of the argument funcpara1 results in stack-based buffer overflow. The attack can only be performed from the local network. The exploit has been made public and could be used.

Buffer overflow in dhd_bus_flow_ring_create_response in drivers/net/wireless/bcmdhd4358/dhd_pcie.c in the bcmdhd4358 Wi-Fi driver on the Samsung Galaxy S6 SM-G920F G920FXXU5EQH7 allow an attacker (who has obtained code execution on the Wi-Fi) chip to cause the device driver to perform invalid memory accesses. The Samsung ID is SVE-2018-11785.

Buffer overflow in dhd_bus_flow_ring_flush_response in drivers/net/wireless/bcmdhd4358/dhd_pcie.c in the bcmdhd4358 Wi-Fi driver on the Samsung Galaxy S6 allow an attacker (who has obtained code execution on the Wi-Fi chip) to cause the device driver to perform invalid memory accesses. The Samsung ID is SVE-2018-11785.

D-Link DAP-1360 webproc Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1360 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of requests to the /cgi-bin/webproc endpoint. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-18416.

Buffer overflow in prot_get_ring_space in the bcmdhd4358 Wi-Fi driver on the Samsung Galaxy S6 SM-G920F G920FXXU5EQH7 allows an attacker (who has obtained code execution on the Wi-Fi chip) to overwrite kernel memory due to improper validation of the ring buffer read pointer. The Samsung ID is SVE-2018-12029.

DeltaV Versions 11.3.1, 12.3.1, 13.3.0, 13.3.1, and R5 is vulnerable to a buffer overflow exploit through an open communication port to allow arbitrary code execution.

Autel MaxiCharger AC Elite Business C50 AppAuthenExchangeRandomNum Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Autel MaxiCharger AC Elite Business C50 EV chargers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the AppAuthenExchangeRandomNum BLE command. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-23384.

No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c.

Wyze Cam v3 Realtek Wi-Fi Driver Heap-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Wyze Cam v3 IP cameras. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Realtek Wi-Fi kernel module. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the kernel. Was ZDI-CAN-22310.

Description: A vulnerability in SiLabs Unify Gateway 1.3.1 and earlier allows an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

Due to a failure in validating the length of a provided MQTT_CMD_PUBLISH parsed message with a variable length header, Cesanta Mongoose, an embeddable web server, version 7.10 is susceptible to a heap-based buffer overflow vulnerability in the default configuration. Version 7.9 and prior does not appear to be vulnerable. This issue is resolved in version 7.11.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Synology DiskStation Manager. Authentication is not required to exploit this vulnerablity. The specific flaw exists within the processing of DSI structures in Netatalk. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-12326.

Windows Network Load Balancing Remote Code Execution Vulnerability

Heap-based buffer overflow in wpa_supplicant 1.0 through 2.4 allows remote attackers to cause a denial of service (crash), read memory, or possibly execute arbitrary code via crafted SSID information in a management frame when creating or updating P2P entries.

Multiple Buffer Overflow vulnerabilities in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCuo17183, CSCvd73487.

arduino-TuyaOpen before version 1.2.1 contains a heap-based buffer overflow vulnerability in the DnsServer component. An attacker on the same local area network who controls the LAN DNS server can send malicious DNS responses to overflow the heap buffer, potentially allowing execution of arbitrary code on affected embedded devices.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Nighthawk R7800. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_bind.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12303.

An Improper Restriction of Operations within the Bounds of a Memory Buffer issue was discovered in the Continental AG Infineon S-Gold 2 (PMB 8876) chipset on BMW several models produced between 2009-2010, Ford a limited number of P-HEV vehicles, Infiniti 2013 JX35, Infiniti 2014-2016 QX60, Infiniti 2014-2016 QX60 Hybrid, Infiniti 2014-2015 QX50, Infiniti 2014-2015 QX50 Hybrid, Infiniti 2013 M37/M56, Infiniti 2014-2016 Q70, Infiniti 2014-2016 Q70L, Infiniti 2015-2016 Q70 Hybrid, Infiniti 2013 QX56, Infiniti 2014-2016 QX 80, and Nissan 2011-2015 Leaf. A vulnerability in the temporary mobile subscriber identity (TMSI) may allow an attacker to access and control memory. This may allow remote code execution on the baseband radio processor of the TCU.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom binary called mp4ts under the /var/www/video folder. It seems that this binary dumps the HTTP VERB in the system logs. As a part of doing that it retrieves the HTTP VERB sent by the user and uses a vulnerable sprintf function at address 0x0000C3D4 in the function sub_C210 to copy the value into a string and then into a log file. Since there is no bounds check being performed on the environment variable at address 0x0000C360 this results in a stack overflow and overwrites the PC register allowing an attacker to execute buffer overflow or even a command injection attack.

Ariel Harush and Roy Hodir from OTORIO have found a flaw in the AXIS A1001 when communicating over OSDP. A heap-based buffer overflow was found in the pacsiod process which is handling the OSDP communication allowing to write outside of the allocated buffer. By appending invalid data to an OSDP message it was possible to write data beyond the heap allocated buffer. The data written outside the buffer could be used to execute arbitrary code.  lease refer to the Axis security advisory for more information, mitigation and affected products and software versions.

An issue was discovered in certain Apple products. iOS before 10.3.3 is affected. macOS before 10.12.6 is affected. tvOS before 10.2.2 is affected. The issue involves the "Wi-Fi" component. It allows remote attackers to execute arbitrary code (on the Wi-Fi chip) or cause a denial of service (memory corruption) by leveraging proximity for 802.11.

Description: A vulnerability in SiLabs Z/IP Gateway 7.18.01 and earlier allows an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

SAIL is a cross-platform library for loading and saving images with support for animation, metadata, and ICC profiles. All versions are vulnerable to Heap-based Buffer Overflow through the XWD parser's use of the bytes_per_line value. The value os read directly from the file as the read size in io->strict_read(), and is never compared to the actual size of the destination buffer. An attacker can provide an XWD file with an arbitrarily large bytes_per_line, causing a massive write operation beyond the buffer heap allocated for the image pixels. The issue did not have a fix at the time of publication.

Heap-based buffer overflow in Windows Telephony Service allows an unauthorized attacker to elevate privileges over an adjacent network.

Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service.